Speckle imaging

Speckle imaging

Speckle imaging (also known as "video astronomy") describes a range of high-resolution astronomical imaging techniques based either on the shift-and-add ("image stacking") method or on speckle interferometry methods. These techniques can dramatically increase the resolution of ground-based telescopes.

Explanation

The principle of all the techniques is to take very short exposure images of astronomical targets, and then process the images so as to remove the effects of astronomical seeing. Use of these techniques led to a number of discoveries, including thousands of binary stars that would otherwise look like a single star to a visual observer working with a similar-sized telescope, and the first images of sunspots on other stars. Many of the techniques remain in wide use today, notably when imaging relatively bright targets.

In theory the resolution limit of a telescope is a function of the size of the main mirror, due to the effects of Fraunhofer diffraction. This results in images of distant objects being spread out to a small spot known as the Airy disk. A group of objects spread out over a distance smaller than this limit looks like a single object. Thus larger telescopes can not only image dimmer objects because they collect more light on the larger mirror, but are also able to image smaller objects as well.

This breaks down due to the practical limits imposed by the atmosphere, whose random nature disrupts the single spot of the Airy disk into a pattern of similarly-sized spots covering a much larger area (see image of binary on right). For typical seeing, the practical resolution limits are at mirror sizes well within existing mechanical limits, at a mirror diameter equal to the astronomical seeing parameter r0 - about 20 cm in diameter for visible observations under good conditions. For many years telescope performance was limited by this effect, until the introduction of speckle interferometry and adaptive optics provided paths to remove this limitation.

Speckle imaging recreates the original image through image processing techniques. The key to the technique, found by the American astronomer David L. Fried in 1966, was to take very fast images in which the atmosphere is effectively "frozen" in place. For infrared images, exposure times are on the order of 100 ms, but for the visible region they drop to as little as 10 ms. In images at this time scale, or smaller, the movement of the atmosphere is too sluggish to have an effect; the speckles recorded in the image are a snapshot of the atmospheric seeing at that instant.

Of course there is a downside: taking images at this short an exposure is difficult, and if the object is too dim, not enough light will be captured to make the analysis possible. Early uses of the technique in the early 1970s were made on a limited scale using photographic techniques, but since photographic film captures only about 7% of the incoming light, only the brightest of objects could be processed in this way. The introduction of the CCD into astronomy, which captures more than 70% of the light, lowered the bar on practical applications enormously, and today the technique is widely used on bright astronomical objects (e.g. stars and star systems).

The fact that many of the speckle imaging methods have multiple names results largely from amateur astronomers re-inventing existing speckle imaging techniques and giving them new names.

More recently, another use of the technique has developed for industrial applications. By shining a laser (whose smooth wavefront is an excellent simulation of the light from a distant star) on a surface, the resulting speckle pattern can be processed to give detailed images of flaws in the material.

Types of speckle imaging

Techniques based on the shift-and-add method

In one technique called shift-and-add (also called "image stacking"), the short exposure images are lined up by the brightest speckle and averaged together to give a single output image. In the Lucky Imaging approach, only the best few short exposures are selected. Early shift-and-add techniques aligned images according to the image centroid, giving a lower overall Strehl ratio.

Techniques based on speckle interferometry

In 1970 the French astronomer Antoine Labeyrie showed that information could be obtained about the high-resolution structure of the object from the speckle patterns using Fourier analysis ("speckle interferometry"). In the 1980s methods were developed which allowed images to be reconstructed interferometrically from these speckle patterns.

One more recent type of speckle interferometry called speckle masking involves calculation of the "bispectrum" or "closure phases" from each of the short exposures. The "average bispectrum" can then be calculated and then inverted to obtain an image. This works particularly well using aperture masks. In this arrangement the telescope aperture is blocked by astronomers apart from a few holes which allow light through, creating a small optical interferometer with better resolving power than the telescope would otherwise have. This aperture masking technique was pioneered by the Cavendish Astrophysics Group.

One limitation of the technique is that it requires extensive computer processing of the image, which was also hard to come by when it was first applied. Although the almost-universal Data General Nova served well in this role, it was slow enough to limit the application to only "important" targets. Again, this limitation has largely disappeared over the years, and nowadays desktop computers have more than enough power to make such processing a trivial task.

Biology

Speckle imaging in biology refers to the underlabeling of periodic cellular components (such as filaments and fibers) so that instead of appearing as a continuous and uniform structure, it appears as a discrete set of speckles. This is due to statistical distribution of the labeled component within unlabeled components. The technique enables real-time monitoring of dynamical systems and video image analysis to understand biological processes.

ee also

* Astronomical interferometer
* Holographic interferometry
* Electronic Speckle Pattern Interferometry
* Bispectral analysis
* optical interferometry
* Aperture synthesis
* Aperture Masking Interferometry
* Lucky Imaging

Example images

All of these were obtained using speckle imaging and have higher resolution than can be obtained with e.g. the Hubble Space Telescope:
* [http://www.physics.usyd.edu.au/~gekko/wr104.html WR 104]
* [http://www.physics.usyd.edu.au/~gekko/wr98a.html WR 98a]
* [http://www.physics.usyd.edu.au/~gekko/doughnut.html LKHa 101]
* [http://www.physics.usyd.edu.au/~gekko/mwc349.html MWC 349A]
* [http://www.mrao.cam.ac.uk/telescopes/coast/betel.html Betelgeuse]

References

* [http://ukads.nottingham.ac.uk/cgi-bin/nph-bib_query?bibcode=1966OSAJ...56.1372F&db_key=AST Optical Resolution Through a Randomly Inhomogeneous Medium for Very Long and Very Short Exposures] , David L. Fried, 1966.
* [http://ukads.nottingham.ac.uk/cgi-bin/nph-bib_query?bibcode=1970A%26A.....6...85L&db_key=AST Attainment of Diffraction Limited Resolution in Large Telescopes by Fourier Analysing Speckle Patterns in Star Images] , Antoine Labeyrie, 1970


Wikimedia Foundation. 2010.

Игры ⚽ Поможем написать курсовую

Look at other dictionaries:

  • Speckle masking — (or bispectral analysis) is a speckle imaging method which involves estimation of the bispectrum or closure phases from each of the short exposures. The average bispectrum can then be calculated and then inverted to obtain an image. With a normal …   Wikipedia

  • Speckle pattern — A speckle pattern is a random intensity pattern produced by the mutual interference of a set of wavefronts. This phenomenon has been investigated by scientists since the time of Newton, but speckles have come into prominence since the invention… …   Wikipedia

  • Lucky imaging — M15 coreLucky imaging (also called lucky exposures) is one form of speckle imaging used for astronomical photography. Speckle imaging techniques use a high speed camera with exposure times short enough (100 ms or less) so that the changes in the… …   Wikipedia

  • Dynamic speckle — Figure 1 A dynamic speckle from a maize seed that seems to “boil” faster in the areas where the scatterers are more active, in this case in the embryo and in a river like in the crack. In physics, dynamic speckle is a result of the temporal… …   Wikipedia

  • Medical imaging — This article is about imaging techniques and modalities for the human body. For imaging of animals in research, see Preclinical imaging. Medical imaging Diagnostics A CT scan image showing a ruptured abdominal aortic aneurysm …   Wikipedia

  • Astronomical seeing — Schematic diagram illustrating how optical wavefronts from a distant star may be perturbed by a layer of turbulent mixing in the atmosphere. The vertical scale of the wavefronts plotted is highly exaggerated. Astronomical seeing refers to the… …   Wikipedia

  • Interferometría de moteado — Este artículo o sección sobre ciencia necesita ser wikificado con un formato acorde a las convenciones de estilo. Por favor, edítalo para que las cumpla. Mientras tanto, no elimines este aviso puesto el 11 de diciembre de 2007. También puedes… …   Wikipedia Español

  • Optical telescope — Eight Inch refracting telescope (Chabot Space and Science Center) An optical telescope is a telescope which is used to gather and focus light mainly from the visible part of the electromagnetic spectrum for directly viewing a magnified image for… …   Wikipedia

  • Diffusing-wave spectroscopy — (DWS) is an optical technique derived from dynamic light scattering (DLS) that studies the dynamics of scattered light in the limit of strong multiple scattering.[1][2] It has been widely used in the past to study colloidal suspensions, emulsions …   Wikipedia

  • Hubble Space Telescope — Infobox Space telescope name = Hubble Space Telescope (HST) caption = The Hubble Space Telescope as seen from Space Shuttle Discovery during its second servicing mission (STS 82) organization = NASAESASTScI alt names = nssdc id =… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”