Flicker fusion threshold

Flicker fusion threshold

The flicker fusion threshold (or flicker fusion rate) is a concept in the psychophysics of vision. It is defined as the frequency at which an intermittent light stimulus appears to be completely steady to the observer (this article centers around human observers). Flicker fusion threshold is related to persistence of vision.

Explanation

Like all psychophysical thresholds, the flicker fusion threshold is a statistical rather than an absolute quantity. There is a range of frequencies within which flicker sometimes will be seen and sometimes will not be seen, and the threshold is the frequency at which flicker is detected on 50% of trials.

Different points in the visual system have very different critical flicker fusion rate (CFF) sensitivities. Each cell type integrates signals differently. For example, photoreceptors are very slow and sluggish whereas some retinal ganglion cells can maintain firing rates up to 250 Hz. [http://www.bio.net/bionet/mm/neur-sci/2007-July/061925.html]

The flicker fusion threshold is proportional to the amount of modulation; if brightness is constant, a brief flicker will manifest a much lower threshold frequency than a long flicker. The threshold also varies with brightness (it is higher for a brighter light source) and with location on the retina where the perceived image falls: the rod cells of the human eye have a faster response time than the cone cells, so flicker can be sensed in peripheral vision at higher frequencies than in foveal vision.

The flicker fusion threshold also is lower for a fatigued observer. Decrease in the critical fusion frequency has often been used as an index of central fatigue. [Ernst Simonson and Norbert Enzer, Measurement of fusion frequency of flicker as a test for fatigue of the central nervous system, J. Indus. Hyg. Tox., 23, 1941, 83-89.]

The flicker fusion threshold also varies between species. Pigeons have been shown to have higher threshold than humans, and the same is probably true of all birds. Many mammals have a higher proportion of rods in their retinae than humans do, and it is likely that they would also have higher flicker fusion thresholds.

Importance

Flicker fusion is important in all technologies for presenting moving images, nearly all of which depend on presenting a rapid succession of static images (e.g. the frames in a cinema film, TV show, or a digital video file). If the frame rate falls below the flicker fusion threshold for the given viewing conditions, flicker will be apparent to the observer, and movements of objects on the film will appear jerky. For the purposes of presenting moving images, the human flicker fusion threshold is usually taken as 16 hertz (Hz). In actual practice, movies are recorded at 24 frames per second, and TV cameras operate at 25 or 30 frames per second, depending on the TV system used. Even though motion may seem to be continuous at 25 or 30 frame/s, the brightness may still seem to flicker objectionably. By showing each frame twice in cinema projection (48 Hz), and using interlace in television (50 or 60 Hz), a reasonable margin of error for unusual viewing conditions is achieved in minimising subjective flicker effects.

Flicker is also important in the field of domestic (alternating current) lighting, where noticeable flicker can be caused by varying electrical loads, and hence can be very disturbing to electric utility customers. Most electricity providers have maximum flicker limits that they try to meet for domestic customers.

Subjectivity of flicker

Computer CRT displays usually operate at a vertical scan rate well over 60 Hz (modern ones are around 100Hz), and can thus be considered flicker-free. Other display technologies do not flicker noticeably so the frame rate is less important. LCD flat panels do not "seem" to flicker at all as the backlight of the screen operates at a very high frequency of nearly 200 Hz, and each pixel is changed on a scan rather than briefly turning on and then off as in CRT displays.In some cases, it is possible to indirectly detect flicker at rates well beyond 60 Hz in the case of high-speed motion, via the stroboscopic effect. Human factors experts refer to this effect as a Phantom Array. Fast-moving flickering objects zooming across view (either by object motion, or by eye motion such as rolling eyes), can cause a dotted or multicolored blur instead of a continuous blur. A common example of this phenomenon is the DLP Rainbow Effect. Some special effects, such as certain kinds of electronic glowsticks commonly seen at outdoor events, have the appearance of a solid color when motionless but produce a multicolored or dotted blur when waved about in motion.

Fluorescent lamps using conventional magnetic ballasts flicker at twice the supply frequency. Electronic ballasts do not produce light flicker, since the phosphor persistence is longer than a half cycle of the higher operation frequency. The 100–120 Hz flicker produced by magnetic ballasts is associated with headaches and eyestrain. [ cite web
title =
title = Full-spectrum Fluorescent lighting : A review of its effects on physiology and health
url = http://journals.cambridge.org/action/displayAbstract?fromPage=online&aid=81689
accessdate = 2008-04-23
] Individuals with high critical flicker fusion threshold are particularly affected by magnetic ballasts: their EEG alpha waves are markedly attenuated and they perform office tasks with greater speed and decreased accuracy. The problems are not observed with electronic ballasts. [cite journal |journal= Ergonomics |volume=41 |issue=4 |pages=433–47 |year=1998 |title= The impact of flicker from fluorescent lighting on well-being, performance and physiological arousal |author= Küller R, Laike T |doi= 10.1080/001401398186928] Ordinary people have better reading performance using high-frequency (20–60 kHz) electronic ballasts than magnetic ballasts. [cite journal |journal= Light Res Tech |volume=27 |issue=4 |year=1995 |pages=243–256 |url=http://irc.nrc-cnrc.gc.ca/pubs/fulltext/nrcc38944/ |accessdate=2007-08-12 |author= Veitch JA, McColl SL |title= Modulation of fluorescent light: flicker rate and light source effects on visual performance and visual comfort]

The flicker of fluorescent lamps, even with magnetic ballasts, is so rapid that it is unlikely to present a hazard to individuals with epilepsy. [cite journal |journal=Epilepsia |year=1979 |volume=20 |issue=6 |pages=725–7 |title= Fluorescent lighting and epilepsy |author= Binnie CD, de Korte RA, Wisman T |pmid=499117 |doi=10.1111/j.1528-1157.1979.tb04856.x] Early studies suspected a relationship between the flickering of fluorescent lamps with magnetic ballasts and repetitive movement in autistic children. [cite journal |journal= J Autism Child Schizophr |year=1976 |volume=6 |issue=2 |pages=157–62 |title= The effects of fluorescent and incandescent illumination upon repetitive behaviors in autistic children |author= Colman RS, Frankel F, Ritvo E, Freeman BJ |doi=10.1007/BF01538059 |pmid=989489] However, these studies had interpretive problems [cite journal |journal= J Child Psychol Psychiatry |year=1999 |volume=40 |issue=6 |pages=839–49 |title= Annotation: Repetitive behaviour in autism: a review of psychological research |author= Turner M |pmid=10509879 |doi= 10.1017/S0021963099004278] and have not been replicated.

ee also

*Persistence of vision
*Tweening

References

External links

* [http://www.enernex.com/staff/docs/FlickerPQA2004.pdf IEC Flicker Meter]
* [http://pages.cthome.net/rwinkler/fff.htm The Flicker Fusion Factor] Why we can't drive safely at high speed


Wikimedia Foundation. 2010.

Игры ⚽ Поможем сделать НИР

Look at other dictionaries:

  • flicker fusion threshold — critical fusion frequency …   Medical dictionary

  • Flicker (screen) — Flicker is visible fading between cycles displayed on video displays, especially the refresh interval on cathode ray tube (CRT) based computer screens. Flicker occurs on CRTs when the they are driven at a low refresh rate, allowing the screen s… …   Wikipedia

  • Flicker-free — (or 100 Hz or 120 Hz, depending on country) is a term given to televisions that operate at a 100 or 120 hertz field rate to eliminate flicker, compared to standard televisions that operate at 50 Hz (PAL, SÉCAM systems) or 60 Hz (NTSC). Flicker… …   Wikipedia

  • Critical fusion frequency — is the rate at which stimuli can be presented and still be perceived as a separate stimuli. Stimuli presented at a higher rate than CFF are perceived as continuous stimuli. Motion pictures move because the frames are presented at an higher rate… …   Wikipedia

  • critical flicker frequency — noun or critical fusion frequency : the threshold at which light from an intermittent source is seen half the time as flickering and half the time as fused or continuous …   Useful english dictionary

  • Movie projector — This article is concerned with technical aspects of moving film projection. For non film movie projection, see digital cinema. For historical aspects, see the article history of cinema. 35 mm movie projector in operation …   Wikipedia

  • FFT — fast Fourier transform; finite Fourier transform; flicker fusion test or threshold * * * flicker fusion threshold; see critical fusion frequency, under frequency …   Medical dictionary

  • Магнетизм —     Классическая электродинамика …   Википедия

  • Pulse-width modulation — (PWM) of a signal or power source involves the modulation of its duty cycle, to either convey information over a communications channel or control the amount of power sent to a load. PrinciplePulse width modulation uses a square wave whose pulse… …   Wikipedia

  • пороговая частота слияния мельканий — rus пороговая частота (ж) слияния мельканий eng flicker fusion threshold fra seuil (m) de fréquence critique de fusion optique deu subjektive Verschmelzungsschwelle (f) spa umbral (m) de fusión visual, umbral (m) de fusión intermitente …   Безопасность и гигиена труда. Перевод на английский, французский, немецкий, испанский языки

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”