Volvo Modular engine

The Volvo Modular engine is a family of straight-4, straight-5, and straight-6 automobile piston engine produced in the 2000s. It has an aluminium engine block and aluminium 4-valve DOHC cylinder heads and uses SFI fuel injection and has fracture-split forged steel connecting rods. All are built in Skövde, Sweden.

B4204T3

The B4204T3 is a 1.9 L (1948 cc) straight-4 built in Skövde, Sweden. Bore is 83 mm and stroke is 90 mm. Output is 165 hp (121 kW) at 5250 rpm with 177 ft·lbf (239 N m) of torque at 1800-4500 rpm. It is turbocharged and intercooled.

Applications:
* 2003 S40
* 2003 V40

2.3

The B5234 is a 2.3 L (2319 cc) straight-5. Bore is 81 mm and stroke is 90 mm.

B5234T3

The B5234T3 features variable valve timing, a single turbocharger, and an intercooler. Output is 250 hp (184 kW) at 5200 rpm with 243 ft·lbf (330 N m) of torque at 2500-5200 rpm.

Applications:
* 1998 V70 T5
* 2001 S60 T5
* 2003 C70
* 2003 V70 T5

2.4

The B5244 is a 2.4 L (2435 cc) straight-5. Bore is 83 mm and stroke is 90 mm.

B5244S

The B5244S produces 168 hp (125 kW) at 5900 rpm with 170 ft·lbf (231 N m) of torque at 4500 rpm.

Applications:
* 2003 V70 2.4
* 2003 S60 2.4
* 1993 - 1997 Volvo 850
* 2000 V70 2.4
* 1996 - 1998 Renault Safrane 2.5

B5244T

The B5244T is turbocharged and intercooled. Output is 197 hp (147 kW) at 5700 rpm with 210 ft·lbf (285 N m) of torque at 1800 rpm.

Applications:
* 1997 850GLT
* 1998-2000 S70GLT
* 1998-2002 V70GLT
* 1998-2002 XC70
* 2001-2002 S60 2.4T
* 2003 C70

2.5

The B524 is a 2.5 L (2521 cc) straight-5. Bore is 83 mm and stroke is 93.2 mm. It also has an assembled cast aluminium intake manifold.

B524T2

The B524T2 has VVT and is turbocharged and intercooled. Output is 208 hp (155 kW) at 5000 rpm with 236 ft·lbf (320 N m) of torque at 1500-5000 rpm.

Applications:
* 2003 Volvo S60 2.5T
* 2003 S60 2.5T AWD
* 2003 V70 2.5T
* 2003 V70 2.5T AWD
* 2003 XC70 Cross Country
* 2003 S80 2.5T
* 2003 XC90

B524T2-R (B5254T4)

The B524T2-R has VVT and is turbocharged and intercooled.

Output is 300 hp (220 kW) at 5500 rpm with 295 ft·lbf (400 N m) of torque at 1950-5250 rpm with the 6 speed M66AWD (Ford/Getrag) manual transmission.

Output is reduced to 300 hp (220 kW) at 6000 rpm with 258ft.lb (350 N m) of torque between 1850 and 6000 rpm with the 5 speed AW51AWD Aisin Warner automatic transmission (2004-2005).

The 6 speed TF-SC80 automatic transmission is not limited (2006-2007).

Applications:
* 2004-2007 Volvo S60R AWD
* 2004-2007 Volvo V70R AWD

The Volvo B62 is a straight-6 automobile piston engine produced in the 2000s. It has an aluminium engine block and aluminium DOHC cylinder heads. It uses SFI fuel injection, has 4 valves per cylinder with and features fracture-split forged steel connecting rods.

2.9

The B6294 is a 2.9 L (2922 cc) straight-6 built in Skövde, Sweden.

B6294S

The B6294S is a 2.9 L (2922 cc) straight-6 built in Skövde, Sweden. Bore is 83 mm and stroke is 90.3 mm. Output is 194 hp (145 kW) at 6000 rpm with 207 ft·lbf (281 N m) of torque at 4200 rpm. This engine is based on the B6304 (see below), but refined for transverse mounting and variable valve timing.

Applications:
* 2003 S80 2.9

B6294T

The B6294T is a 2.9 L (2922 cc) version built in Skövde, Sweden. Bore is 83 mm and stroke is 90.3 mm. Output is 268 hp (200 kW) at 5200 rpm with 280 ft·lbf (380 N m) of torque at 1800-5000 rpm. It has two turbochargers and is intercooled.

Applications:
* 2003 S80 T6/T6 Executive
* 2003 XC90 T6

B6304S

The B6304S was the first generation of modular inline-6 engines. It has the same bore and stroke (83x90 mm) as the B6294, but the deciliter number was rounded up (i.e. 2,922 cc to 3,000 cc). These engines produced convert|204|hp|abbr=on at 6000 rpm, and convert|197|ft.lbf|N.m|abbr=on of torque at 4,300 rpm. Engine output was reduced to convert|180|hp|abbr=on and convert|199|ft.lbf|N.m|abbr=on by changing the cam profile (back then without variable valve timing) in favor of emissions regulations.

Applications:
* 1992~1998 Volvo 960 and S90 (Longitudinally Mounted RWD)

B6254S

A new, small 2.5-litre engine, known as the B6254 FS, was introduced for the 1995 Volvo 960. It developed convert|170|bhp|abbr=on at 5,700 rpm and maximum torque of 230 Nm at 4,400 rpm. This engine was identical in every way to the larger B6304S, apart from the stroke being reduced to 80 mm and the bore to 81 mm, producing a displacement of 2,473 cc. Like other Volvo engines, it was optimised for low-end and middle range torque. [cite web
title=Press launch information pack - Volvo 960 1995
url=http://www.volvoclub.org.uk/press/pdf/presskits/960PressKitJuly1995.pdf
publisher=Volvo Car Corporation
date=June 1994]

Applications:
* 1995~1998 Volvo 960 (Longitudinally Mounted RWD)

B6254G

Non-catalyst, leaded-fuel compatible version of the B6254S, for regions with limited availability of unleaded fuel.

ee also

* List of Volvo engines