Pre-flight (printing)

Pre-flight (printing)

Pre-flighting is a term used in the printing industry to describe the process of confirming that the digital files required for the printing process are all present, valid, correctly formatted, and of the desired type. The term originates from the pre-flight checklists used by pilots. The term was first used in a presentation at the Color Connections conference in 1990 by consultant Chuck Weger.

Background

In a common digital prepress workflow, a collection of computer files provided by clients will be translated from an application-specific format such as Adobe InDesign or QuarkXPress to a format that the raster image processor (RIP) can interpret. But before this rasterization occurs, workers in the prepress department confirm the incoming materials to make sure they are ready to be sent to the RIP. This is an important step because it prevents production delays caused by missing materials or improperly prepared materials. Once the incoming materials have passed the pre-flight check, they are ready to be put into production and sent to the RIP.

These intermediate formats are commonly called page description languages (two common PDLs are Adobe PostScript and Hewlett-Packard PCL). The RIP prepares the final raster image that will be printed directly (as in desktop inkjet or laser printing), set to photographic film or paper (using an imagesetter), or transferred direct-to-plate.

Depending on the hardware and software components and configurations, RIPs have unique problems rasterizing the image data contained in a PDL file. If there is a failure in rasterizing the image, it can be costly, as imagesetters, direct-to-plate systems, and high-end inkjet printers can consume expensive supplies, can require extensive amounts of time to process complex image data, and require skilled labor to operate.

The pre-flight process

The process of pre-flighting a print job helps reduce the likelihood of rasterization problems that cause production delays. Page layout software applications, (which allow users to combine images, graphics, and text from a variety of formats,) automate portions of the pre-flight process. Typically, client provided materials are verified by a pre-flight operator for completeness and to confirm the incoming materials meet the production requirements. The pre-flight process checks for:

* images and graphics embedded by the client have been provided and are available to the application
* fonts are accessible to the system
* fonts are not corrupt
* fonts are in a compatible format
* image files are of formats that the application can process
* image files are of the correct color format (some RIPs have problems processing RGB images, for example)
* image files are of the correct resolution
* required color profiles are included
* image files are not corrupt
* confirm that the page layout document size, margins, bleeds, marks and page information all fit within the constraints of the output device and match the client specifications
* confirm that the correct colour separations or ink plates are being output

Other, more advanced pre-flight steps might also include:
* removing non-printing data, such as non-printing objects, hidden objects, objects outside the printable area and objects on layers below
* flattening transparent objects into a single opaque object
* converting fonts to paths
* gathering embedded image and graphic files to one location accessible to the system
* compressing files into an archive format

The specifics of what checks are made is governed by the features of the pre-flight application, the formats of the client provided files, and the targeted output device as well as the printing specifications.

A purpose-built software application is not required to pre-flight a file, although several commercial applications are available. Small shops may use an inexpensive laser printer to test whether or not their file will print. The conversion to Portable Document Format (PDF) can reveal problems, and can in some circumstances be considered a pre-flight process.

History

Early pre-flight methods were largely manual, and typically relied on checklists that highly-skilled prepress operators would use to verify the production readiness of each incoming job. As desktop publishing and graphics applications, PDLs, RIPs, and output devices evolved, the process became more complex. Software plug-ins and stand-alone applications that supported the major desktop publishing applications were then developed to meet that need, along with proprietary tools made by hardware manufacturers and commercial printers and service bureaus. The developers of the major applications then began to incorporate functionality in their applications, leveraging their knowledge of their own file formats.


Wikimedia Foundation. 2010.

Игры ⚽ Поможем написать реферат

Look at other dictionaries:

  • Korean Air Lines Flight 007 — Flight 007 redirects here. For other uses, see Flight 7 (disambiguation). Korean Air Lines Flight 007 Artist s rendition of HL7442, the KAL 747 lost during Flight 007 Occurrence summary …   Wikipedia

  • American Airlines Flight 965 — An American Airlines 757, similar to the one involved in the accident Accident summary Date Decemb …   Wikipedia

  • List of minor Star Wars characters — This article is about minor characters in the fictional Star Wars universe, who do not fit into any other category.AlisiaAlisia is a female Gran who works as a station nurse in the Med Center of Tansarii Point Station. She and a 2 1B Surgical… …   Wikipedia

  • Bear Bryant — Bryant with trademark houndstooth hat Sport(s) Football Biographical details Born September 11, 1913 …   Wikipedia

  • EskoArtwork — Type Private Industry Graphic arts Founded Ghent, Belgium (2002) Headquarters Ghent, Belgium …   Wikipedia

  • EskoArtwork (company) — Infobox Company company name = EskoArtwork company company type = Private foundation = Ghent, Belgium (2002) location city = Ghent location country = Belgium key people = Carsten Knudsen, CEO [ [http://www.manufacturingtalk.com/news/esv/esv124.htm… …   Wikipedia

  • Gerald Ford — This article is about the U.S. President. For other uses, see Gerald Ford (disambiguation). Gerald Ford 38th President of the United States …   Wikipedia

  • Electronic ticket — E ticket redirects here. For the former Disneyland and Disney World tickets, see E ticket. An electronic ticket (commonly abbreviated as e ticket) is a digital ticket. It may be issued by an airline, in road, urban or rail public transport, and… …   Wikipedia

  • Weather forecasting — weather forecaster redirects here. For other uses, see Weatherman (disambiguation). Forecast of surface pressures five days into the future for the north Pacific, North America, and north Atlantic ocean. Weather forecasting is the application of… …   Wikipedia

  • QuarkXPress — Infobox Software name = QuarkXPress caption = QuarkXPress 6 on Mac OS X developer = Quark, Inc. released = 1987 frequently updated = yes operating system = Mac OS X and Microsoft Windows language = multilingual genre = Desktop publishing license …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”