Mole (unit)

Mole (unit)

The mole is a unit of measurement used in chemistry to express amounts of a chemical substance, defined as an amount of a substance that contains as many elementary entities (e.g., atoms, molecules, ions, electrons) as there are atoms in 12 grams of pure carbon-12 (12C), the isotope of carbon with atomic weight 12. This corresponds to a value of 6.02214179(30)×1023 elementary entities of that substance. It is one of the base units in the International System of Units, and has the unit symbol mol.[1]

The mole is widely used in chemistry, instead of units of mass or volume, as a convenient way to express the amounts of reagents and products of chemical reactions. For example, the chemical equation 2 H2 + O2 → 2 H2O implies that 2 mol of dihydrogen and 1 mol of dioxygen react to form 2 mol of water. The mole may also be used to express the number of atoms, ions, or other elementary entities in some sample. The concentration of a solution is commonly expressed by its molarity, the number of moles of the dissolved substance per liter of solution.

The number of molecules in a mole (known as Avogadro's number) is defined so that the mass of one mole of a substance, expressed in grams, is exactly equal to the substance's mean molecular weight. For example, the mean molecular weight of natural water is about 18.015, so one mole of water is about 18.015 grams. This property considerably simplifies many chemical and physical computations.

The name gram-molecule was formerly used for essentially the same concept.[1] The name gram-atom (abbreviated gat.) has been used for related but distinct concept, namely a quantity of a substance that contains Avogadro's number of atoms, whether isolated or combined in molecules. Thus, for example, 1 mole of MgB2 is 1 gram-molecule of MgB2 but 3 gram-atoms of MgB2.[2][3]

Contents

Definition and related concepts

As of 2011, the mole is defined by BIPM to be an amount of a substance that contains as many elementary entities (e.g. atoms, molecules, ions, electrons) as there are atoms in 12 grams of pure carbon-12 (12C), the isotope of carbon with atomic weight 12.[1] Thus, by definition, one mole of pure 12C has a mass of exactly 12 g. It also follows from the definition that X moles of any substance will contain the same number of molecules as X moles of any other substance.

The mass per mole of a substance is called its molar mass. Since the standard unit for expressing the mass of molecules or atoms (the dalton or atomic mass unit) is defined as 1/12 of the mass of a 12C atom, it follows that the molar mass of a substance, measured in grams per mole, is exactly equal to its mean molecular or atomic mass, measured in daltons; which is to say, to the substance's mean molecular or atomic weight.

The number of elementary entities in a sample of a substance is technically called its (chemical) amount. Therefore, the mole is a convenient unit for that physical quantity. One can determine the chemical amount of a known substance, in moles, by dividing the sample's mass by the substance's molar mass.[4] Other methods include the use of the molar volume or the measurement of electric charge.[4]

It should be noted that the mass of one mole of a substance depends not only on its molecular formula, but also on the proportion of the isotopes of each element present in it. For example, one mole of calcium-40 is 39.96259098 ± 0.00000022 grams, whereas one mole of calcium-42 is 41.95861801 ± 0.00000027 grams, and one mole of calcium with the normal isotopic mix is 40.078 ± 0.004 grams.

Since the definition of the gram is not (as of 2011) mathematically tied to that of the dalton, the number NA of molecules in a mole (Avogadro's number) must be determined experimentally. The value adopted by CODATA in 2006 is NA = 6.02214179×1023 ± 0.00000030×1023.[5] In 2011 the measurement was refined to 6.02214078×1023 ± 0.00000018×1023.[6]

History

The history of the mole is intertwined with that of molecular mass, atomic mass unit, Avogadro's number and related concepts.

The first table of atomic weights was published by John Dalton (1766–1844) in 1805, based on a system in which the atomic weight of hydrogen was defined as 1. These atomic weights were based on the stoichiometric proportions of chemical reactions and compounds, a fact that greatly aided their acceptance: It was not necessary for a chemist to subscribe to atomic theory (an unproven hypothesis at the time) to make practical use of the tables. This would lead to some confusion between atomic weights (promoted by proponents of atomic theory) and equivalent weights (promoted by its opponents and which sometimes differed from atomic weights by an integer factor), which would last throughout much of the nineteenth century.

Jöns Jacob Berzelius (1779–1848) was instrumental in the determination of atomic weights to ever-increasing accuracy. He was also the first chemist to use oxygen as the standard to which other weights were referred. Oxygen is a useful standard, as, unlike hydrogen, it forms compounds with most other elements, especially metals. However, he chose to fix the atomic weight of oxygen as 100, an innovation that did not catch on.

Charles Frédéric Gerhardt (1816–56), Henri Victor Regnault (1810–78) and Stanislao Cannizzaro (1826–1910) expanded on Berzelius' works, resolving many of the problems of unknown stoichiometry of compounds, and the use of atomic weights attracted a large consensus by the time of the Karlsruhe Congress (1860). The convention had reverted to defining the atomic weight of hydrogen as 1, although at the level of precision of measurements at that time — relative uncertainties of around 1% — this was numerically equivalent to the later standard of oxygen = 16. However the chemical convenience of having oxygen as the primary atomic weight standard became ever more evident with advances in analytical chemistry and the need for ever more accurate atomic weight determinations.

Developments in mass spectrometry led to the adoption of oxygen-16 as the standard substance, in lieu of natural oxygen.[citation needed] The current definition of the mole, based on carbon-12, was approved during the 1960s.[1][7] The four different definitions were equivalent to within 1%.

Scale basis Scale basis
relative to 12C = 12
Relative deviation
from the 12C = 12 scale
Atomic weight of hydrogen = 1 1.00794(7) −0.788%
Atomic weight of oxygen = 16 15.9994(3) +0.00375%
Relative atomic mass of 16O = 16 15.9949146221(15) +0.0318%

The name mole is an 1897 translation of the German unit Mol, coined by the chemist Wilhelm Ostwald in 1893 from the German word Molekül (molecule).[8][9][10] However, the related concept of equivalent mass had been in use at least a century earlier.[11]

The mole as a unit

Since its adoption into the International System of Units, there have been a number of criticisms of the concept of the mole as a unit like the meter or the second:

  • the number of molecules, etc. in a given lump of material is a fixed dimensionless quantity that can be expressed simply as a number, so does not require its own base unit;[7]
  • the SI thermodynamic mole is irrelevant to analytical chemistry and is causing avoidable costs to advanced economies;[12]
  • the mole is not a true metric (i.e. measuring) unit, rather it is a parametric unit and amount of substance is a parametric base quantity;[13]
  • the concepts of the SI quantity 'amount of substance' and unit 'mole' are confusing and difficult to teach.[14]
  • the SI defines numbers of entities as quantities of dimension one, and thus ignores the ontological distinction between entities and units of continuous quantities.[15]

In chemistry, it has been known since Proust's law of definite proportions (1794) that knowledge of the mass of each of the components in a chemical system is not sufficient to define the system. Amount of substance can be described as mass divided by Proust's "definite proportions", and contains information that is missing from the measurement of mass alone. As demonstrated by Dalton's law of partial pressures (1803), a measurement of mass is not even necessary to measure the amount of substance (although in practice it is usual). There are many physical relationships between amount of substance and other physical quantities, the most notable one being the ideal gas law (where the relationship was first demonstrated in 1857). The term "mole" was first used in a textbook describing these colligative properties.

Other units called "mole"

Chemical engineers use the concept extensively, but the unit is rather small for industrial use.[16] For convenience in avoiding conversions, some American engineers adopted the pound-mole (noted lb-mol or lbmol), which is defined as the number of entities in 12 lb of 12C. One lb-mol is equal to 453.59237 mol.[17] In the metric system, chemical engineers once used the kilogram-mole (noted kg-mol), which is defined as the number of entities in 12 kg of 12C, and often referred to the mole as the gram-mole (noted g-mol), when dealing with laboratory data.[17] However modern chemical engineering practice is to use the kilomole (kmol), which is identical to the kilogram-mole, but whose name and symbol adopt the SI convention for standard multiples of metric units.

Proposed future definition

Kilogram

As with other SI base units, there have been proposals to redefine the kilogram in such a way as to define some currently measured physical constants to fixed values. One proposed definition of the kilogram is:[18]

The kilogram is the mass of exactly (6.0221415×10230.012) unbound carbon-12 atoms at rest and in their ground state.

This would have the effect of defining the Avogadro constant to be precisely 6.0221415×1023 elementary entities per mole.

A decision on this proposal is expected by the CGPM in October 2011.[19]

Related units

The SI units for molar concentration are mol/m3. However, most chemical literature traditionally uses mol/dm3, or mol dm−3, which is the same as mol/L. These traditional units are often denoted by a capital letter M (pronounced "molar"), sometimes preceded by an SI prefix, for example, millimoles per litre (mmol/L) or millimolar (mM), micromoles/litre (µmol/L) or micromolar (µM), or nanomoles/L (nmol/L) or nanomolar (nM).

The unit's holiday

October 23 is called Mole Day.[20] It is an informal holiday in honor of the unit among chemists in North America. The date is derived from Avogadro's number, which is approximately 6.022×1023. It officially starts at 6:02 A.M. and ends at 6:02 P.M.

See also

References

  1. ^ a b c d International Bureau of Weights and Measures (2006), The International System of Units (SI) (8th ed.), pp. 114–15, ISBN 92-822-2213-6, http://www.bipm.org/utils/common/pdf/si_brochure_8_en.pdf 
  2. ^ Wang, Yuxing et al.; Bouquet, Fr d ric; Sheikin, Ilya; Toulemonde, Pierre; Revaz, Bernard; Eisterer, Michael; Weber, Harald W; Hinderer, Joerg et al. (2003). "Specific heat of MgB2 after irradiation". Journal of Physics: Condensed Matter 15 (6): 883–893. arXiv:cond-mat/0208169. Bibcode 2003JPCM...15..883W. doi:10.1088/0953-8984/15/6/315. 
  3. ^ Lortz, R. et al.; Wang, Y.; Abe, S.; Meingast, C.; Paderno, Yu.; Filippov, V.; Junod, A. (2005). "Specific heat, magnetic susceptibility, resistivity and thermal expansion of the superconductor ZrB12". Phys. Rev. B 72 (2): 024547. arXiv:cond-mat/0502193. Bibcode 2005PhRvB..72b4547L. doi:10.1103/PhysRevB.72.024547. 
  4. ^ a b International Bureau of Weights and Measures. "Realising the mole." Retrieved 25 September 2008.
  5. ^ Mohr, Peter J.; Taylor, Barry N.; Newell, David B. (2008). "CODATA Recommended Values of the Fundamental Physical Constants: 2006". Rev. Mod. Phys. 80: 633–730. Bibcode 2008RvMP...80..633M. doi:10.1103/RevModPhys.80.633. http://physics.nist.gov/cuu/Constants/codata.pdf.  Direct link to value.
  6. ^ Andreas, Birk; et al (2011). "Determination of the Avogadro Constant by Counting the Atoms in a 28Si Crystal". Physical Review Letters 106 (3). Bibcode 2011PhRvL.106c0801A. doi:10.1103/PhysRevLett.106.030801. http://physics.aps.org/synopsis-for/10.1103/PhysRevLett.106.030801. 
  7. ^ a b de Bièvre, P.; Peiser, H.S. (1992). "'Atomic Weight'—The Name, Its History, Definition, and Units". Pure Appl. Chem. 64 (10): 1535–43. doi:10.1351/pac199264101535. http://www.iupac.org/publications/pac/1992/pdf/6410x1535.pdf 
  8. ^ Helm, Georg (1897). The Principles of Mathematical Chemistry: The Energetics of Chemical Phenomena. transl. by Livingston, J.; Morgan, R.. New York: Wiley. p. 6. 
  9. ^ Some sources place the date of first usage in English as 1902. Merriam–Webster proposes an etymology from Molekulärgewicht (molecular weight).
  10. ^ Ostwald, Wilhelm (1893). Hand- und Hilfsbuch zur Ausführung Physiko-Chemischer Messungen. Leipzig. p. 119. 
  11. ^ mole, n.8, Oxford English Dictionary, Draft Revision Dec. 2008
  12. ^ Price, Gary (2010). "Failures of the global measurement system. Part 1: the case of chemistry". Accreditation and Quality Assurance 15 (7): 421–427. doi:10.1007/s00769-010-0655-z. http://www.springerlink.com/content/p63w663v127t5g0q/. [1].
  13. ^ Johansson, Ingvar (2010). "Metrological thinking needs the notions of parametric quantities, units, and dimensions.". Metrologia 47 (3): 219-230. Bibcode 2010Metro..47..219J. doi:10.1088/0026-1394/47/3/012. http://stacks.iop.org/0026-1394/47/i=3/a=012. 
  14. ^ Furio, C; Azcona, R;Guisasola, J. (2002). "The learning and teaching of the concepts 'amount of substance' and mole - a review of the literature". Chemistry Education: Research and Practice in Europe 3 (3): 277–292. http://www.uoi.gr/cerp/2002_October/pdf/02Furio.pdf.  [2]
  15. ^ Cooper, G; Humphry, S (2010). "The ontological distinction between units and entities". Synthese. doi:10.1007/s11229-010-9832-1. 
  16. ^ In particular, when the mole is used, alongside the SI unit of volume of a cubic metre, in thermodynamic calculations such as the ideal gas law, a factor of 1000 is introduced which engineering practice chooses to simplify by adopting the kilomole.
  17. ^ a b Himmelblau, David (1996). Basic Principles and Calculations in Chemical Engineering (6 ed.). pp. 17–20. ISBN 0-13-305798-4. 
  18. ^ Mills, Ian M.; Mohr, Peter J.; Quinn, Terry J.; Taylor, Barry N.; Williams, Edwin R. (2005). "Redefinition of the kilogram: a decision whose time has come". Metrologia 42 (2): 71–80. Bibcode 2005Metro..42...71M. doi:10.1088/0026-1394/42/2/001. http://www.iop.org/EJ/article/0026-1394/42/2/001/met5_2_001.pdf.  Abstract.
  19. ^ Ian Mills (29 September 2010). "Draft Chapter 2 for SI Brochure, following redefinitions of the base units". CCU. http://www.bipm.org/utils/en/pdf/si_brochure_draft_ch2.pdf. Retrieved 2011-01-01. 
  20. ^ History of National Mole Day Foundation, Inc

External links


Wikimedia Foundation. 2010.

Игры ⚽ Нужно решить контрольную?

Look at other dictionaries:

  • Mole (disambiguation) — Mole may refer to:Animals* Mole or mouldywarp, any of the burrowing insectivorous mammals in the family Talpidae, with short velvety fur and enlarged front limbs; the original burrowing mole * Golden mole, any of the burrowing insectivorous… …   Wikipedia

  • Mole (physique) — Mole (unité) Pour les articles homonymes, voir Mole. La mole (symbole : mol) est une unité de base du système international, apparue en 1971, qui est principalement utilisée en physique et en chimie. La mole est la quantité de matière d un… …   Wikipédia en Français

  • Mole (unite) — Mole (unité) Pour les articles homonymes, voir Mole. La mole (symbole : mol) est une unité de base du système international, apparue en 1971, qui est principalement utilisée en physique et en chimie. La mole est la quantité de matière d un… …   Wikipédia en Français

  • mole — mole1 /mohl/, n. 1. any of various small insectivorous mammals, esp. of the family Talpidae, living chiefly underground, and having velvety fur, very small eyes, and strong forefeet. 2. a spy who becomes part of and works from within the ranks of …   Universalium

  • Mole — Contents 1 Animals 2 Other common meanings 3 Places 3.1 Afri …   Wikipedia

  • Mole-Richardson — Mole Richardson, also known as Mole, is a stage lighting instrument and motion picture lighting manufacturing company based in Hollywood, California. The company was started in 1927 by Sicilain immigrant Peter Mule (changed to Mole) born in… …   Wikipedia

  • mole — [ moul ] noun count * ▸ 1 brown lump/spot on skin ▸ 2 small animal ▸ 3 someone who gives information ▸ 4 wall against waves ▸ 5 unit of molecules 1. ) a dark brown lump or spot on your skin that is permanent 2. ) a small animal with dark fur that …   Usage of the words and phrases in modern English

  • mole — Ⅰ. mole [1] ► NOUN 1) a small burrowing insect eating mammal with dark velvety fur, a long muzzle, and very small eyes. 2) a spy who manages to achieve an important position within the security defences of a country. 3) someone within an… …   English terms dictionary

  • mole — mole1 [mōl] n. [ME < OE mal, akin to Goth mail < IE base * mai , to spot > Gr miainein, to sully] a small, congenital spot on the human skin, usually dark colored and slightly raised, often hairy mole2 [mōl] n. [ME molle, akin to or < …   English World dictionary

  • mole — n. A quantity of a substance equal to the molecular weight of a substance expressed in grams; a gram molecule; the basic unit of amount of substance adopted under the System International d Unites; as, he added two moles of sodium chloride to the …   The Collaborative International Dictionary of English

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”