XANES

XANES

X-ray Absorption Near Edge Structure (XANES), also known as Near edge X-ray absorption fine structure (NEXAFS) is a type of absorption spectroscopy. NEXAFS also at times used the abbreviation EXAFS.

XANES data indicate the absorption peaks due to the photoabsorption cross section in the X-ray Absorption Spectra (XAS) observed in the energy region. Here the XANES spectroscopy and its applications in these last 30 years is described.

Contents

Terminology

Both XANES and NEXAFS are acceptable terms for the same technique. The difference in usage is the energy range above the absorption edge. NEXAFS is synonymous with XANES, but NEXAFS by convention is usually reserved for soft X-ray spectroscopy (photon energy less than 1000 electron volts). NEXAFS is generally used when applied to surface and molecular science, while XANES is used in most other fields.[citation needed]

Theory

The fundamental processes which contribute to NEXAFS spectra: (a) photoabsorption of an x-ray into a core level followed by photoelectron emission, followed by either (b) filling of the core hole by an electron in another level, accompanied by fluorescence; or (c) filling of the core hole by an electron in another level followed by emission of an Auger electron.

The fundamental phenomenon underlying NEXAFS is the absorption of an x-ray photon by a core level of an atom in a solid and the consequent emission of a photoelectron (see the first Figure). The resulting core hole is filled either via an Auger process or by capture of an electron from another shell followed by emission of a fluorescent photon. The difference between NEXAFS and traditional photoemission experiments is that in photoemission, the initial photoelectron itself is measured, while in NEXAFS the fluorescent photon or Auger electron or an inelastically scattered photoelectron may also be measured. The distinction sounds trivial but is actually significant: in photoemission the final state of the emitted electron captured in the detector must be an extended, free-electron state. By contrast in NEXAFS the final state of the photoelectron may be a bound state such as an exciton since the photoelectron itself need not be detected. The effect of measuring fluorescent photons, Auger electrons, and directly emitted electrons is to sum over all possible final states of the photoelectrons, meaning that what NEXAFS measures is the total joint density of states of the initial core level with all final states, consistent with conservation rules. The distinction is critical because in spectroscopy final states are more susceptible to many-body effects than initial states, meaning that NEXAFS spectra are more easily calculable than photoemission spectra. Due to the summation over final states, various sum rules are helpful in the interpretation of NEXAFS spectra. When the x-ray photon energy resonantly connects a core level with a narrow final state in a solid, such as an exciton, readily identifiable characteristic peaks will appear in the spectrum. These narrow characteristic spectral peaks give the NEXAFS technique a lot of its analytical power as illustrated by the B 1s π* exciton shown in the second Figure.

Synchrotron radiation has a natural polarization that can be utilized to great advantage in NEXAFS studies. The commonly studied molecular adsorbates have sigma and pi bonds that may have a particular orientation on a surface. The angle dependence of the x-ray absorption tracks the orientation of resonant bonds due to dipole selection rules.

Experimental considerations

Normal-incidence boron 1s x-ray absorption spectra for two types of BN powder. The cubic phase shows only σ-bonding while the hexagonal phase shows both π and σ bonding.

NEXAFS spectra are usually measured either through the fluorescent yield, in which emitted photons are monitored, or total electron yield, in which the sample is connected to ground through an ammeter and the neutralization current is monitored. Because NEXAFS measurements require an intense tunable source of soft x-rays, they are performed at synchrotrons. Because NEXAFS soft x-rays are absorbed by air, the synchrotron radiation travels from the ring in an evacuated beam-line to the end-station where the specimen to be studied is mounted. Specialized beam-lines intended for NEXAFS studies often have additional capabilities such as heating a sample or exposing it to a dose of reactive gas.

Energy Range

Edge energy range

In the absorption edge region of metals, the photoelectron is excited to the first unoccupied level above the Fermi level. Therefore its mean free path in a pure single crystal at zero temperature is as large as infinite, and it remains very large, increasing the energy of the final state up to about 5 eV above the Fermi level. Beyond the role of the unoccupied density of states and matrix elements in single electron excitations, many-body effects appear as an "infrared singularity" at the absorption threshold in metals.

In the absorption edge region of insulators the photoelectron is excited to the first unoccupied level above the chemical potential but the unscreened core hole forms a localized bound state called core exciton.

EXAFS energy range

Pictorial view of photoelectron scattering processes in the single-scattering regime, EXAFS (this assumes the single scattering approximation... multiple scattering can be considered with EXAFS), and in the multiple scattering regime, XANES. In EXAFS the photoelectron is scattered only by a single neighbour atom, in XANES all the scattering pathways, classified according to the number of scattering event (3), (4), (5) etc. contribute to the absorption cross section.

The fine structure in the x-ray absorption spectra in the high energy range extending from about 150 eV beyond the ionization potential is a powerful tool to determine the atomic pair distribution (i.e. interatomic distances) with a time scale of about 10−15 s. In fact the final state of the excited photoelectron in the high kinetic energy range (150-2000 eV ) is determined only by single backscattering events due to the low amplitude photoelectron scattering.

XANES energy range

In the XANES region, starting about 5 eV beyond the absorption threshold, because of the low kinetic energy range (5-150 eV) the photoelectron backscattering amplitude by neighbor atoms is very large so that multiple scattering events become dominant in the XANES spectra.

The different energy range between XANES and EXAFS can be also explained in a very simple manner by the comparison between the photoelectron wavelength λ and the interatomic distance of the photoabsorber-backscatterer pair. The photoelectron kinetic energy is connected with the wavelength λ by the following relation:

 E_{kinetic} = h\nu - E_{binding} = \hbar^{2}k^{2}/(2m) = (2\pi)^{2}\hbar^{2}/(2m\lambda^{2})

that means that for high energy the wavelength is shorter than interatomic distances and hence the EXAFS region corresponds to a single scattering regime; while for lower E, λ is larger than interatomic distances and the XANES region is associated with a multiple scattering regime.

Final States

The absorption peaks of XANES spectra are determined by multiple scattering resonances of the photoelectron excited at the atomic absorption site and scattered by neighbor atoms. The local character of the final states is determined by the short photoelectron mean free path, that is strongly reduced (down to about 0.3 nm at 50 eV) in this energy range because of inelastic scattering of the photoelectron by electron-hole excitations (excitons) and collective electronic oscillations of the valence electrons called plasmons.

Applications

The great power of NEXAFS derives from its elemental specificity. Because the various elements have different core level energies, NEXAFS permits extraction of the signal from a surface monolayer or even a single buried layer in the presence of a huge background signal. Buried layers are very important in engineering applications, such as magnetic recording media buried beneath a surface lubricant or dopants below an electrode in an integrated circuit. Because NEXAFS can also determine the chemical state of elements which are present in bulk in minute quantities, it has found widespread use in environmental chemistry and geochemistry. The ability of NEXAFS to study buried atoms is due to its integration over all final states including inelastically scattered electrons, as opposed to photoemission and Auger spectroscopy, which study atoms only with a layer or two of the surface.

Much chemical information can be extracted from the XANES region: formal valence (very difficult to experimentally determine in a nondestructive way); coordination environment (e.g., octahedral, tetrahedral coordination) and subtle geometrical distortions of it.

Transitions to bound vacant states just above the Fermi level can be seen. Thus XANES spectra can be used as a probe of the unoccupied band structure of a material.

The near-edge structure is characteristic of an environment and valence state hence one of its more common uses is in fingerprinting: if you have a mixture of sites/compounds in a sample you can fit the measured spectra with a linear combinations of XANES spectra of known species and determine the proportion of each site/compound in the sample. One example of such a use is the determination of the oxidation state of the plutonium in the soil at Rocky Flats.

The XANES experiments done on plutonium in soil, concrete and standards of the different oxidation states.

History

The acronym XANES was first used in 1980 during interpretation of multiple scattering resonances spectra measured at the Stanford Synchrotron Radiation Laboratory (SSRL) by A. Bianconi. In 1982 the first paper on the application of XANES for determination of local structural geometrical distortions using multiple scattering theory was published by A. Bianconi, P. J. Durham and J. B. Pendry. In 1983 the first NEXAFS paper examining molecules absorbed on surfaces appeared. The first XAFS paper, describing the intermediate region between EXAFS and XANES, appeared in 1987.

Software for XANES analysis

FDMNES Calculation of XANES using finite difference method and full multiple scattering theory.

FEFF8 Calculation of XANES using full multiple scattering theory.

MXAN XANES fitting using full multiple scattering theory.

FitIt XANES fitting using multidimensional interpolation approximation.

PARATEC XANES calculation using plane-wave pseudopotential approach

WIEN2k XANES calculation on the basis of full-potential (linearized) augmented plane-wave approach.

References

  • A. Bianconi "Surface X-ray Absorption Spectroscopy: Surface EXAFS and Surface XANES" Appl. Surf. Sci. Vol. 6 pag. 392-418 (1980)[1]
  • A. Bianconi, M. Dell'Ariccia, P. J. Durham and J. B. Pendry Multiple-scattering resonances and structural effects in the x-ray-absorption near-edge spectra of Fe II and Fe III hexacyanide complexes" Phys. Rev. B 26, 6502–6508 (1982)[2]

Bibliography

  • Xray Absorption: Principles, Applications, Techniques of EXAFS, SEXAFS, and XANES, in Chemical Analysis 92, D. C. Koningsberger and R. Prins, ed., John Wiley & Sons, 1988.
  • Principles and Applications of EXAFS, Chapter 10 in Handbook of Synchrotron Radiation, pp 995–1014. E. A. Stern and S. M. Heald, E. E. Koch, ed., North-Holland, 1983.
  • NEXAFS Spectroscopy by J. Stöhr, Springer 1992, ISBN 3-540-54422-4.

External links


Wikimedia Foundation. 2010.

Игры ⚽ Нужна курсовая?

Look at other dictionaries:

  • XANES — XANES, qui signifie X ray Absorption Near Edge Structure (soit en français Spectroscopie de structure près du front d absorption de rayons X) est une méthode d analyse spectroscopique par absorption de rayons X. Sommaire 1 Principes 2 Notes et… …   Wikipédia en Français

  • XANES — [Abk. für engl. X ray absorption near edge (fine) structure = kantennahe Röntgenabsorptions Feinstruktur]: ↑ EXAFS …   Universal-Lexikon

  • XANES — Die Röntgen Nahkanten Absorptions Spektroskopie, englisch Near Edge X ray Absorption Fine Structure spectroscopy, kurz NEXAFS oder X ray absorption near edge structure (XANES), ist ein Spektroskopie Verfahren zur Untersuchung von… …   Deutsch Wikipedia

  • XANES-спектроскопия — Термин XANES спектроскопия Термин на английском X ray Absorption Near Edge Structure Синонимы Аббревиатуры Связанные термины XAFS Определение см. XAFS Описание Авторы Толкачев Николай Николаевич, к.х.н.Вересов Александр Генрихович, к.х.н. Ссылки… …   Энциклопедический словарь нанотехнологий

  • XANES — X ray Absorption Near Edge Structure (Academic & Science » Electronics) * X Ray Near Edge Spectroscopy (Academic & Science » Astronomy) …   Abbreviations dictionary

  • X-ray Absorption Near Edge Structure — XANES XANES, qui signifie X ray Absorption Near Edge Structure (soit en français Spectroscopie de structure près du front d absorption de rayons X) est une méthode d analyse spectroscopique par absorption de rayons X. Sommaire 1 Principes 2 Notes …   Wikipédia en Français

  • X-ray absorption fine structure — (XAFS) is a specific structure observed in X ray absorption spectroscopy (XAS). By analyzing the XAFS, information can be acquired on the local structure and on the unoccupied electronic states.The X ray absorption spectra show a steep rise at… …   Wikipedia

  • Röntgenfluoreszenzanalyse — Die Röntgenfluoreszenzanalyse (RFA), auch Röntgenfluoreszenzspektroskopie (RFS) genannt (im Englischen X ray fluorescence spectroscopy, XRF) ist eine Methode aus der Materialanalytik. Sie ist eine der am häufigsten eingesetzten Methoden zur… …   Deutsch Wikipedia

  • Mitología asturiana — Este artículo o sección necesita referencias que aparezcan en una publicación acreditada, como revistas especializadas, monografías, prensa diaria o páginas de Internet fidedignas. Puedes añadirlas así o avisar …   Wikipedia Español

  • Extended X-Ray Absorption Fine Structure — (EXAFS), or more simply X ray Absorption Spectroscopy (XAS), is an experimental method in physics and chemistry of determining the bonding of solids by analyzing oscillations in x ray absorption versus photon energy that are caused by… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”