Paperboard

Paperboard
Corrugated fiberboard made from paperboard

Paperboard is a thick paper based material. While there is no rigid differentiation between paper and paperboard, paperboard is generally thicker (usually over 0.25 mm/0.010 in or 10 points) than paper. According to ISO standards, paperboard is a paper with a basis weight (grammage) above 224 g/m2, but there are exceptions.[1] Paperboard can be single or multi-ply. Paperboard can be easily cut and formed, is lightweight, and because it is strong, is used in packaging. Another end-use would be graphic printing, such as book and magazine covers or postcards. Sometimes it is referred to as cardboard, which is a generic, lay term used to refer to any heavy paper pulp based board.

Contents

History

In 1817, the first paperboard carton was produced in England. Folding cartons first emerged around the 1860s and were shipped flat to save space, ready to be set up by customers when they were required. 1879 saw the development of mechanical die cutting and creasing of blanks. In 1911 the first kraft sulphate mill was built in Florida and in 1915 the gable top milk carton was patented and in 1935 the first dairy plant was observed using them. Ovenable paperboard was introduced in 1974.[2]

Terminology and classification

Terminology and classifications of paperboard are not always uniform. Differences occur depending on specific industry, locale, and personal choice. In general, the following are often used:[3][4]

  • Boxboard or cartonboard – paperboard for folding cartons and rigid set-up boxes
    • Folding boxboard (FBB) – a bending grade capable of being scored and bending without fracture
    • Chipboard – all recycled, low quality board
    • Kraft board – a strong virgin fiber board often used for beverage carriers. Often clay coated for printing
    • Laminated board – a lamination of paperboards and other materials, for example Liquid packaging board
    • Solid Bleached Board (SBB) or Solid Bleached Sulphate {SBS) – clean white board used for foods etc. Sulphate refers to the Kraft process
    • Solid unbleached board (SUB) – board made from unbleached chemical pulp
    • White lined chipboard (WLC) – a white, often clay coated, chipboard
  • Containerboard – a type of paperboard manufactured for the production of corrugated fiberboard
    • Corrugated medium – the inner fluted portion of corrugated fiberboard
    • Linerboard – a strong stiff board for one or both sides of corrugated boxes. It is the flat covering over the corrugating medium.
  • Other
    • Binder's board – a paperboard used in bookbinding for making hardcovers.

Production

Fibrous material is turned into pulp and bleached, to create one or more layers of board, which can be optionally coated for a better surface and/or improved visual appearance. Paperboard are produced on paper machines that can handle higher grammages and several plies.

Raw materials

The above mentioned fibrous material can either come from fresh (virgin) sources (e.g. wood) or from recycled waste paper. Around 90% of virgin paper is made from wood pulp.[5] Today paperboard packaging in general, and especially products from certified sustainable sources, are receiving new attention, as manufacturers dealing with environmental, health, and regulatory issues look to renewable resources to meet increasing demand. It is now mandatory in many countries for paper-based packaging to be manufactured wholly or partially from recycled material.

Raw materials include:

  • Hardwood: Ca .05 inches (1.3 mm) (length) e.g. Birch which has short fibres. It is generally more difficult to work with; however, it does provide higher tensile strength, but lower tear and other strength properties. Although its fibres are not as long and strong as those in softwood, they make for a stiffer product defined by some stifness tests. Hardwood fibres fill the sheet better and therefore make a smoother paper that is more opaque and better for printing. Hardwood makes an excellent corrugating medium.
  • Softwood: Ca .13 inches (3.3 mm) (length) e.g. Pine and spruce which have typically long fibres and make superior paperboard in services where strength is important. Softwood makes excellent linerboard.
  • Recycled: Used paper is collected and sorted and usually mixed with virgin fibres in order to make new material. This is necessary as the recycled fibre often loses strength when reused; the added virgin fibres enhance strength. Mixed waste paper is not usually deinked (skipping the deinking stage) for paperboard manufacture and hence the pulp may contain traces of inks, adhesives, and other residues which together give it a grey colour. Products made of recycled board usually have a less predictable composition and poorer functional properties than virgin fibre-based boards.[6]
    Health risks have been associated with using recycled material in direct food contact. Swiss studies have shown that recycled material can contain significant portions of mineral oil, which may migrate into packed foods.[7] (Mineral oil levels of up to 19.4 mg/kg were found in rice packed in recycled board.)[8]

Pulping

Two principal methods for extracting fibres from their sources are:

  • Chemical Pulping uses chemical solutions to convert wood into pulp, yielding around 30% less than mechanical pulping; however, pulp made by the kraft process has superior strength
  • Thermo mechanical pulp is a two stage process which results in a very high yield of wood fibres at the expense of strength.


Bleaching

Pulp used in the manufacture of paperboard can be bleached to decrease colour and increase purity. Virgin fibre pulp is naturally brown in colour, because of the presence of lignin. Recycled paperboard may contain traces of inks, bonding agents and other residue which colors it grey. Although bleaching is not necessary for all end uses, it is vital for many graphical and packaging purposes. There are various different methods of bleaching, which are used according to a number of factors for example, the degree of colour change required, chemicals chosen and method of treatment. There are three categories of bleaching methods:

  • Bleaching by delignification using chlorine gas, which is a method that has been largely replaced by procedures which are gentler to the environment such as the use of oxygen as a replacement for the chlorine gas.
  • Bleaching by oxidation using chemicals such as chlorine dioxide, hydrogen peroxide or sodium hypochlorite.
  • Bleaching by reduction using chemicals such as sodium bisulphite.[6]

Plies

(1)single ply vs. (2)multi ply

Multi-ply paperboard generally has higher creasing and folding performance than single-ply as a result of layering different types of pulp into a single product. In cases where the same kind of pulp is being used in several layers, each separate layer is treated and shaped individually in order to create the highest possible quality. The benefits of multi ply paperboard are for example its higher creasing and folding performance.[6]

Coating

In order to improve whiteness, smoothness and gloss of paperboard,one or more layers of coating is applied. Coated paper is usually made up of:

Additional components could be OBA (optical brightening agents).[9]

Grades

The DIN Standard 19303 "Paperboard - Terms and grades" (Publication date : 2005-09) defines different grades of paperboard based on the surface treatment (first letter), the main furnish (second letter) and the colour (non-D grade) or bulk (D grade only) (numbering).

First letter
(surface treatment)
Second letter
(main furnish)
Number
A = cast-coated
G = pigment coated
U = uncoated
Z = bleached virgin chemical pulp
C = virgin mechanical pulp

N = unbleached virgin chemical pulp
T = recycled/secondary fibre with white, cream or brown reverse
D = recycled/secondary fibre with grey back

(all except D grades):

1 = white reverse side
2 = cream reverse side
3 = brown reverse side

(D grades only):
1 = bulk >= 1.45 cm³/g
2 = bulk < 1.45 cm³/g, > 1.3 cm³/g
3 = bulk <= 1.3 cm³/g

Example: GC1 would be a "pigment coated", "virgin mechanical pulp" board with a "white reverse side". Often the used paperboard type would be FBB, which was coated on both sides.

Common terms

Basis Weight (US): Is the weight 1,000 square feet (93 m2) of paperboard.

Brightness: Brightness is a technical term that is defined as the amount of blue-white light that a paper reflects.[10] This property is very subjective and individual to each buyer and end use, as skin colour and food are better reproduced on ‘warm’ (yellow) whites and not blue whites.

Grammage: The grammage of the paperboard is assessed in accordance ISO 536.[11] Grammage expresses weight per unit area and is measured in g/m2.[10]

PH: Surface pH is measured on a water extract and is on a scale of 0-14, 0 being acidic, 7 neutral and 14 alkaline.[12]

Stiffness: Stiffness is one of the most important properties of paperboard as it affects the ability of cartons to run smoothly through the machine that erects, fills and closes them. Stiffness also gives strength and reduces the propensity of a carton to bulge under the weight of settling flowable contents such as cereals.

Although most paper strength properties increase with increasing sheet density, stifness does not. A rule of thumb is that stiffness is proportional to the 1.6 power of sheet caliper.

The species fo fiber used has an effect on stiffness, other things being equal. Northern softwood species impart superior stiffness sompared to southern softwoods.

Other factors which affect board stiffness include coatings and moisture content.[10]

Smoothness: Smoothness is particularly important when being used for printing, the smoother the paperboard, the better the image quality, because of better ink coverage. Smoothness is measured using air leak methods – the greater the rate of air leakage, at a specific air pressure, from under a cylindrical knife placed on the surface, the rougher the surface.[10]

Caliper/Thickness: In the US caliper is usually expressed in thousandths of an inch (0.001”) or points, where a sheet of paperboard with a thickness of 0.024” would be 24 points. In Europe it is measured in g/m2. Paperboard also tends to be referred to with thickness rather than weight.[9]

Whiteness: It refers ideally to the equal presence of all colours, because a truly white sheet will reflect all wavelengths of visible light equally.[10]

Paperboard industry

The paperboard sector is mainly looked at in conjunction with the paper industry. The Paper & Paperboard market size (2007) had a value of 630.9 billion USD and a volume of 320.3 million metric tons .[5] 40.1% of that market is European. About 50% of all produced paper is used for packaging, followed by printing and writing.[5] The consumption of paper and paperboard seem to correlate with economic trends (GDP) [13] According to ProCarton, the consumption of paper and paperboard seem to correlate with economic trends (GDP)[14] the sales of carton in Europe sum up to around 8 billion Euros worth. Over 1,100 printers consume 5.4 million tonnes of cartonboard yearly. Cartons make up one third of paper and board packaging and 15% of all packaging. A bit more than half (54%) of the European carton is produced using recovered fibre or waste paper.[15]

The paper and paperboard industry is quite energy and capital intensive. Just a coated board machine itself can costs around 90 - 120 million Euros[16] (about 125 - 166 million USD in 11/2011). Economies of scale apply, because of which a few large players often dominate the market place. E.g. in North America the top 5 producers have a market share of 85%.

See also

References

  1. ^ Robertson, Gordon L. (2005). Food Packaging - Principle and Practice (2nd Ed.). p. 111. ISBN 978-0849337758. 
  2. ^ Paperboard Packaging Alliance. "Paperboard Packaging". http://www.paperboardpackaging.org/student_design_challenge/syllabus/1-%20History%20of%20Paperboard.pdf. Retrieved 2009-07-18. 
  3. ^ ASTM D996
  4. ^ Soroka, W. Illustrated Glossary of Packaging Terminology (Second ed.). Institute of Packaging Professionals. http://www.iopp.org/i4a/pages/Index.cfm?pageID=1. 
  5. ^ a b c Datamonitor (June 2008). Global Paper and Paperboard - Industry Profile. 
  6. ^ a b c Iggesund Paperboard AB (2008). Paperboard the Iggesund Way. p. 10. 
  7. ^ Federal Institute for Risk Assessment (Germany). "Migration of mineral oil from packaging materials to foodstuffs (BfR Opinion No. 008/2010 of 2009-12-09)". http://www.bfr.bund.de/cm/230/migration_of_mineral_oil_from_packaging_materials_to_foodstuffs.pdf. Retrieved 2010-04-21. 
  8. ^ Bundesinstitut für Risikobewertung. "Übergänge von Mineralöl aus Verpackungsmaterialien auf Lebensmittel". http://www.bfr.bund.de/cm/216/uebergaenge_von_mineraloel_aus_verpackungsmaterialien_auf_lebensmittel.pdf. Retrieved 2010-04-21. 
  9. ^ a b Kirwan, Mark J. (1998). Paper and paperboard packaging technology. London: Blackwell Publishing. ISBN 978-1-4051-6845-8. 
  10. ^ a b c d e Twede, Diana; Selke, Susan E. M. (2004). Cartons, Crates and Corrugated Board: Handbook of Paper and Wood Packaging Technology. Lancaster, PA: DasTech Publications. 
  11. ^ ISO: International Organisation for Standardisation (1995). "Paper and board -- Determination of grammage". http://www.iso.org/iso/iso_catalogue/catalogue_tc/catalogue_detail.htm?csnumber=20674. Retrieved 2009-07-18. 
  12. ^ Iggesund Paperboard (2008). "Product Catalogue: General Technical Information". http://www.iggesund.com/Main.aspx?ID=d3f6ae98-6286-435d-bf6d-99a7ca881cab. Retrieved 2009-07-18. 
  13. ^ Dr. Peter Ince (1999-2000). "Paper, Paperboard and Woodpulp – Production, Consumption and Trade ECE/FAO Forest Products Annual Market Review". http://www.unece.org/timber/docs/rev-00/12.pdf. Retrieved 2009-07-18. 
  14. ^ ProCarton (2009). "The Carton Packaging Fact File: Cartons, Industry and the Environment". http://www.procarton.com/files/publications_item/fact_file_3.pdf. Retrieved 2009-07-20. 
  15. ^ ProCarton (2009). "Cartonboard Production". http://www.procarton.com/?section=cartonboard_production. Retrieved 2009-07-20. 
  16. ^ Metso Corporation’s press release (2011). "Metso to supply coated board line to International Paper & Sun Cartonboard in China". http://www.metso.com/news/newsdocuments.nsf/Web3NewsDoc/649B6B5726D07047C2257910001C30C3?OpenDocument&ch=ChMetsoWebEng&id=649B6B5726D07047C2257910001C30C3&. Retrieved 2011-11-04. 

Further reading

  • Brody, A. L., and Marsh, K, S., "Encyclopedia of Packaging Technology", John Wiley & Sons, 1997, ISBN 0-471-06397-5
  • Soroka, W, "Fundamentals of Packaging Technology", IoPP, 2002, ISBN 1-930268-25-4

External links

  • TAPPI Technical Association of the Pulp and Paper Industry
  • Paperboard Packaging A renewable, recyclable resource for innovation (Videos)

Wikimedia Foundation. 2010.

Игры ⚽ Нужно сделать НИР?

Look at other dictionaries:

  • paperboard — ☆ paperboard [pā′pər bôrd΄] n. a relatively stiff, heavy material, thicker than paper, made from paper pulp …   English World dictionary

  • paperboard — /pay peuhr bawrd , bohrd /, n. 1. a thick, stiff cardboard composed of layers of paper or paper pulp compressed together; pasteboard. adj. 2. of, pertaining to, or made of paperboard. [1540 50; PAPER + BOARD] * * * …   Universalium

  • paperboard — pa•per•board [[t]ˈpeɪ pərˌbɔrd, ˌboʊrd[/t]] n. 1) a thick, stiff cardboard composed of layers of paper or paper pulp compressed together; pasteboard 2) of or made of paperboard • Etymology: 1540–50 …   From formal English to slang

  • paperboard — kartonas statusas T sritis chemija apibrėžtis Storas kietas popierius, kurio 1 m² masė didesnė negu 150–250 g. atitikmenys: angl. board; cardboard; paperboard; pasteboard rus. картон …   Chemijos terminų aiškinamasis žodynas

  • paperboard — noun Date: 1549 cardboard …   New Collegiate Dictionary

  • paperboard — noun A thick paper, or thin cardboard …   Wiktionary

  • Paperboard — Картон, папка; Картон …   Краткий толковый словарь по полиграфии

  • paperboard — n. cardboard, pasteboard, board made from layers of compressed paper …   English contemporary dictionary

  • paperboard — noun cardboard or pasteboard …   English new terms dictionary

  • paperboard — /ˈpeɪpəbɔd/ (say paypuhbawd) noun material like paper but thicker, stronger and more rigid, used in folding cartons, electrical insulators, coasters, etc …  

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”