Inverse multiplexer


Inverse multiplexer

An inverse multiplexer (often abbreviated to "inverse mux" or "imux") allows a data stream to be broken into multiple lower data rate communications links. An inverse multiplexer differs from a demultiplexer in that each of the low rate links coming from it is related to the other ones and they all work together to carry the same data. By contrast, the output streams from a demultiplexer may each be completely independent from each other and the demultiplexer does not have to understand them in any way.

Note that this is the opposite of a multiplexer which creates one high speed link from multiple low speed ones.

example:

--low rate link #1--
DTE ---high rate data---inverse mux |--low rate link #2--|(de)inverse mux--DCE
--low rate link #3--

DTE = Data terminal equipment DCE = Data circuit terminating equipment

This provides an end to end connection of 3 x the data rate available on each of the low rate data links. Note that, as with multiplexers, links are almost always bi-directional and an inverse mux will practically always be combined with its reverse and still be called an inverse mux. This means that the "de-inverse mux" will actually be an inverse mux.

Inverse muxes are used, for example, to combine a number of ISDN channels together into one high rate circuit, where the DTE needs a higher rate connection than is available from a single ISDN connection. This is typically useful in areas where higher rate circuits are not available.

An alternative to an inverse mux is to use three separate links and load sharing of data between them. In the case of IP, network packets could be sent in round robin mode between each separate link. Advantages of using an inverse mux over separate links include

* lower link latency (one single packet can be spread across all links)
* fairer load sharing
* network simplicity (no router needed between boxes with high speed interfaces)

ee also

*Bonding protocol
*Inverse Multiplexing for ATM
*Link aggregation
*Multiplexer-demultiplexer
*Multilink PPP
*Virtual concatenation


Wikimedia Foundation. 2010.

Look at other dictionaries:

  • inverse multiplexer —    Provides bandwidth on demand for video conferencing, file transfers and high speed applications. Inverse multiplexers use a multiple switched 56K bps or 64K bps connections to achieve whatever bandwidth the users application requires …   IT glossary of terms, acronyms and abbreviations

  • Inverse — or inversion may refer to:* Inverse (program), a program for solving inverse and optimization problems * Inversion (music) * Inversion (prosody), the reversal of the order of a foot s elements * Inversion (linguistics) * Inversion (law),… …   Wikipedia

  • Multiplexer — This article is about electronic switching. For telecommunications, see multiplexing. Schematic of a 2 to 1 Multiplexer. It can be equated to a controlled switch …   Wikipedia

  • Inverse Multiplexing for ATM — (IMA) ist ein standardisiertes Datenübertragungsverfahren aus der Telefonie. Dabei werden Daten in Form von ATM Zellen über ein Bündel von ISDN Leitungen nach E1 oder DS1/T1 Standard übertragen. Bei paralleler Übertragung über mehrere Leitungen… …   Deutsch Wikipedia

  • multiplexer —    Often abbreviated mux. A device that merges several lower speed transmissionchannelsintoonehigh speedchannel at one end of the link. Another multiplexer reverses this process at the other end of the link to reproduce the low speed channels.… …   Dictionary of networking

  • Inverse Multiplexing for ATM — Asynchronous transfer mode Pour les articles homonymes, voir ATM. Pile de protocoles 7 • Application 6 • …   Wikipédia en Français

  • List of electronics topics — Alphabetization has been neglected in some parts of this article (the b section in particular). You can help by editing it. This is a list of communications, computers, electronic circuits, fiberoptics, microelectronics, medical electronics,… …   Wikipedia

  • IMX — abbr. Inverse Multiplexer …   Dictionary of abbreviations

  • инверсный мультиплексор — Устройство, обеспечивающее разделение высокоскоростного потока на несколько низкоскоростных (рис. I 5). Например, инверсный мультиплексор может преобразовать входной поток со скоростью 384 кбит/с в 6 синхронных потоков по 64 кбит/с, каждый из… …   Справочник технического переводчика

  • инверсный мультиплексор ATM — Устройство, позволяющее объединить несколько устройств/каналов T1 или E1 в одно широкополосное устройство/канал для передачи ячеек ATM.  [http://www.lexikon.ru/dict/net/index.html] Тематики сети вычислительные EN ATM inverse multiplexerAIMUX …   Справочник технического переводчика


Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”

We are using cookies for the best presentation of our site. Continuing to use this site, you agree with this.