Rolls-Royce Merlin

Rolls-Royce Merlin
Merlin
A front right view of a black-painted aircraft piston engine. The words 'Rolls-Royce' appear in red text on the camshaft cover.
The Rolls-Royce Merlin
Type Liquid-cooled V-12 piston aero engine
National origin United Kingdom
Manufacturer Rolls-Royce Limited
First run 15 October 1933
Major applications Avro Lancaster
de Havilland Mosquito
Supermarine Spitfire
Hawker Hurricane
Handley Page Halifax [nb 1]
Number built 149,659
Unit cost £2,000 (Engine)
£350 (Propeller)[1]
Variants Packard V-1650
Developed into Rolls-Royce Meteor

The Rolls-Royce Merlin is a British liquid-cooled, V-12, piston aero engine, of 27-litre (1,650 cu in) capacity. Rolls-Royce Limited designed and built the engine which was initially known as the PV-12: the PV-12 became known as the Merlin following the company convention of naming its piston aero engines after birds of prey.

The PV-12 first ran in 1933 and, after several modifications, the first production variants were built in 1936. The first operational aircraft to enter service using the Merlin were the Fairey Battle, Hawker Hurricane and Supermarine Spitfire. More Merlins were made for the four-engined Avro Lancaster heavy bomber than for any other aircraft; however, the engine is most closely associated with the Spitfire, starting with the Spitfire's maiden flight in 1936. A series of rapidly applied developments, brought about by wartime needs, markedly improved the engine's performance and durability.

Considered a British icon,[2] the Merlin was one of the most successful aircraft engines of the World War II era, and many variants were built by Rolls-Royce in Derby, Crewe and Glasgow,[3] as well as by Ford of Britain in Trafford Park, near Manchester.[4] The Packard V-1650 was a version of the Merlin built in the United States. Production ceased in 1950 after a total of almost 150,000 engines had been delivered, the later variants being used for airliners and military transport aircraft.

In military use the Merlin was superseded by its larger capacity stablemate, the Rolls-Royce Griffon. Merlin engines remain in Royal Air Force service today with the Battle of Britain Memorial Flight, and power many restored aircraft in private ownership worldwide.

Design and development

Origin

In the early 1930s, Rolls-Royce started planning its future aero engine development programme and realised that there was a need for an engine larger than their 21-litre (1,296 cu in) Kestrel that had been used with great success in a number of 1930s aircraft.[5] Consequently, work was started on a new 1,100-horsepower (820 kW)-class design known as the PV-12, with PV standing for private venture as the company received no government funding for work on the project. The PV-12 was first run on 15 October 1933 and first flew in a Hawker Hart biplane (serial number K3036) on 21 February 1935.[6] The engine originally used the evaporative cooling system then in vogue. This proved unreliable and when supplies of ethylene glycol from the U.S. became available, the engine was adapted to use a conventional liquid cooling system. The Hart was subsequently delivered to Rolls-Royce where, as a Merlin testbed, it completed over 100 hours of flying with the Merlin C and E engines.[7]

In 1935, the Air Ministry issued a specification, F10/35, for new fighter aircraft with a minimum airspeed of 310 miles per hour (500 km/h). Fortunately, two designs had been developed: the Supermarine Spitfire and the Hawker Hurricane; the latter designed in response to another specification, F36/34.[8] Both were designed around the PV-12 instead of the Kestrel, and were the only contemporary British fighters to have been so developed. Production contracts for both aircraft were placed in 1936, and development of the PV-12 was given top priority as well as government funding. Following the company convention of naming its piston aero engines after birds of prey, Rolls-Royce named the engine the Merlin after a small, Northern Hemisphere falcon (Falco columbarius).[nb 2][9]

Two more Rolls-Royce engines developed just prior to the war were added to the company's range. The 700-horsepower (500 kW) Rolls-Royce Peregrine was an updated, supercharged development of their V-12 Kestrel design, while the 1,700-horsepower (1,300 kW) 42-litre (2,560 cu in) Rolls-Royce Vulture used four Kestrel-sized cylinder blocks fitted to a single crankcase and driving a common crankshaft, forming an X-24 cylinder layout.[10] This was to be used in larger aircraft such as the Avro Manchester.[11]

Although the Peregrine appeared to be a satisfactory design, it was never allowed to mature since Rolls-Royce's priority was refining the Merlin. As a result the Peregrine saw use in only two aircraft: the Westland Whirlwind and the Gloster F9/37. The Vulture was fitted to the Hawker Tornado and Avro Manchester, but proved unreliable in service.[12] With the Merlin itself soon pushing into the 1,500-horsepower (1,100 kW) range, the Peregrine and Vulture were both cancelled in 1943, and by mid-1943 the Merlin was supplemented in service by the larger Rolls-Royce Griffon.[13] The Griffon incorporated several design improvements and ultimately superseded the Merlin.

Development

Initially the new engine was plagued with problems, such as failure of the accessory gear trains and coolant jackets, and several different construction methods were tried before the basic design of the Merlin was set.[14] Early production Merlins were also unreliable: Common problems were cylinder head cracking, coolant leaks, and excessive wear to the camshafts and crankshaft main bearings.[15]

Early engines

The prototype and developmental engine types were the:

  • PV-12
The initial design using an evaporative cooling system. Two built, passed bench Type Testing in July 1934, generating 740 horsepower (552 kW) at 12,000-foot (3,700 m) equivalent. First flown 21 February 1935.[6]
  • Merlin B
Two built, ethylene glycol liquid cooling system introduced. "Ramp" cylinder heads (inlet valves were at a 45-degree angle to the cylinder). Passed Type Testing February 1935, generating 950 horsepower (708 kW) at 11,000-foot (3,400 m) equivalent.[6]
  • Merlin C
Development of Merlin B; Crankcase and cylinder blocks became three separate castings with bolt-on cylinder heads.[6] First flight in Hawker Horsley 21 December 1935, 950 horsepower (708 kW) at 11,000-foot (3,400 m).[16]
  • Merlin E
Similar to C with minor design changes. Passed 50-hour civil test in December 1935 generating a constant 955 horsepower (712 kW) and a maximum rating of 1,045 horsepower (779 kW). Failed military 100-hour test in March 1936. Powered the Supermarine Spitfire prototype.[17]
A sectioned, parallel valve, aircraft engine cylinder head is shown with colour-coded internal details. Coolant passage ways are painted green; the valves, valve springs, camshaft and rocker arms are also shown.
Parallel valve Merlin cylinder head
  • Merlin F (Merlin I)
Similar to C and E. First flight in Horsley 16 July 1936.[18] This became the first production engine; and was designated as the Merlin I. The Merlin continued with the "ramp" head, but this was not a success and only 172 were made. The Fairey Battle was the first production aircraft to be powered by the Merlin I and first flew on 10 March 1936.[17]
  • Merlin G (Merlin II)
Replaced "ramp" cylinder heads with parallel pattern heads (valves parallel to the cylinder) scaled up from the Kestrel engine. 400 Hour flight endurance tests caried out at RAE July 1937; Acceptance test 22 September 1937.[18] It was first widely delivered as the 1,030-horsepower (770 kW) Merlin II in 1938, and production was quickly stepped up.[17]

Production engines

The Merlin II and III series were the first main production versions of the engine. The Merlin III was manufactured with a "universal" propeller shaft, allowing either de Havilland or Rotol manufactured propellers to be used.[19]

The next major version was the XX which ran on 100 octane fuel. This allowed higher manifold pressures, which were achieved by increasing the boost from the centrifugal type supercharger. The Merlin XX incorporated the two-speed superchargers designed by Rolls-Royce, resulting in increased power at higher altitudes than previous versions. Another improvement, allowing the XX and future Merlin variants to run some 70 degrees C cooler, was the use of a 70/30% water/glycol coolant mix rather than the 100% glycol of the earlier versions. This substantially improved engine life and reliability, removed the fire hazard of the flammable ethylene glycol, and reduced the oil leaks that had been a problem with the early Merlin I, II and III series.[20]

The process of improvement continued, with later versions running on further-increased octane ratings, delivering ever higher power. Fundamental design changes were also made to all key components, again increasing the engine's life and reliability. By the end of the war the "little" engine was delivering over 1,600 horsepower (1,200 kW) in common versions, and as much as 2,060 horsepower (1,540 kW) in the Merlin 130/131 versions specifically designed for the de Havilland Hornet. Ultimately, during tests conducted by Rolls-Royce at Derby, Merlin 130 series engines generated over 2,600 horsepower (1,940 kW).[21]

Basic component overview (Merlin 61)

From Jane's:[22]

Cylinders
Twelve cylinders consisting of high-carbon steel liners set in two, two-piece cylinder blocks of cast "R.R.50" aluminium alloy having separate heads and skirts. Coolant in direct contact with external face of liners. Cylinder heads fitted with cast-iron inlet valve guides, phosphor bronze exhaust valve guides, and renewable "Silchrome" steel-alloy valve seats. Two diametrically opposed spark plugs protrude into each combustion chamber.
Pistons
Machined from "R.R.59" alloy forgings. Fully floating hollow gudgeon pins of hardened nickel-chrome steel. Three compression and one oil-control ring above the gudgeon pin, and one oil-control ring below.
Connecting rods
H-section machined nickel-steel forgings, each pair consisting of a plain and a forked rod. The forked rod carries a nickel-steel bearing block which accommodates steel-backed lead-bronze-alloy bearing shells. The "small-end" of each rod houses a floating phosphor bronze bush.
Crankshaft
One-piece, machined from a nitrogen-hardened nickel-chrome molybdenum steel forging. Statically and dynamically balanced. Seven main bearings and six throws.
Crankcase
Two aluminium-alloy castings joined together on the horizontal centreline. The upper portion bears the wheelcase, supercharger and accessories; and carries the cylinder blocks, crankshaft main bearings (split mild-steel shells lined with lead bronze alloy), and part of the housing for the airscrew reduction gear. The lower half forms an oil sump and carries the oil pumps and filters.
Wheelcase
Aluminium casting fitted to rear of crankcase. Houses drives to the camshafts, magnetos, coolant and oil pumps, supercharger, hand and electric starters, and the electric generator.
Valve gear
Two inlet and two exhaust poppet valves of "K.E.965" steel per cylinder. Both the inlet and exhaust valves have hardened "stellited" ends; while the exhaust valves also have sodium-cooled stems, and heads protected with a "Brightray" (nickel-chromium) coating. Each valve is kept closed by a pair of concentric coil-springs. A single, seven-bearing camshaft, located on the top of each cylinder head operates 24 individual steel rockers; 12 pivoting from a rocker shaft on the inner, intake side of the block to actuate the exhaust valves, the others pivoting from a shaft on the exhaust side of the block to actuate the inlet valves.

Technical improvements

Most of the Merlin's technical improvements resulted from more efficient superchargers, designed by Stanley Hooker, and the introduction of aviation spirits with increased octane ratings. Numerous detail changes were made internally and externally to the engine to withstand increased power ratings and to incorporate advances in engineering practices.[23]

Ejector exhausts
The right side of an uncowled, installed aircraft engine, with details of the exhaust system
Merlin 55 ejector exhaust detail, Spitfire LF.VB, EP120

The Merlin consumed an enormous volume of air at full power (equivalent to the volume of a single-decker bus per minute), and with the exhaust gases exiting at 1,300 mph (2,100 km/h) it was realised that useful thrust could be gained simply by angling the gases backwards instead of venting sideways.

During tests, 70 pounds-force (310 N; 32 kgf) thrust at 300 miles per hour (480 km/h), or roughly 70 horsepower (52 kW) was obtained which increased the level maximum speed of the Spitfire by 10 mph (16 km/h) to 360 mph (580 km/h).[24] The first versions of the ejector exhausts featured round outlets, while subsequent versions of the system used "fishtail" style outlets which marginally increased thrust and reduced exhaust glare for night flying.

In September 1937 the Spitfire prototype, K5054, was fitted with ejector type exhausts. Later marks of the Spitfire used a variation of this exhaust system fitted with forward-facing intake ducts to distribute hot air out to the wing-mounted guns to prevent freezing and stoppages at high altitudes, replacing an earlier system that used heated air from the engine coolant radiator. The latter system had become ineffective due to improvements to the Merlin itself which allowed higher operating altitudes where air temperatures are lower.[25] Ejector exhausts were also fitted to other Merlin-powered aircraft.

Supercharger

Central to the success of the Merlin was the supercharger. A.C. Lovesey, an engineer who was a key figure in the design of the Merlin, delivered a lecture on the development of the Merlin in 1946; in this extract he explained the importance of the supercharger:

"Coming now to specific development items we can ... divide them into three general classes:

  1. Improvement of the supercharger.
  2. Improved fuels.
  3. Development of mechanical features to take care of the improvements afforded by (1) and (2).
Dealing with (1) it can be said that the supercharger determines the capacity, or ... the output, of the engine. The impression still prevails that the static capacity known as the swept volume is the basis of comparison of the possible power output for different types of engine, but this is not the case because the output of the engine depends solely on the mass of air it can be made to consume efficiently, and in this respect the supercharger plays the most important role ... the engine has to be capable of dealing with the greater mass flows with respect to cooling, freedom from detonation and capable of withstanding high gas and inertia loads ... During the course of research and development on superchargers it became apparent to us that any further increase in the altitude performance of the Merlin engine necessitated the employment of a two-stage supercharger."[26]

As the Merlin evolved so too did the supercharger; the latter fitting into three broad categories:[27]

  1. Single-stage, single-speed gearbox: Merlin I to III, XII, 30, 40, and 50 series (1937–1942).[nb 3]
  2. Single-stage, two-speed gearbox: experimental Merlin X (1938), production Merlin XX (1940–1945).
  3. Two-stage, two-speed gearbox with intercooler: mainly Merlin 60, 70, and 80 series (1942–1946).

The Merlin supercharger was originally designed to allow the engine to generate maximum power at an altitude of about 16,000 feet (5,000 m). In 1938 Stanley Hooker, an Oxford graduate in applied mathematics, explained "... I soon became very familiar with the construction of the Merlin supercharger and carburettor ... Since the supercharger was at the rear of the engine it had come in for pretty severe design treatment, and the air intake duct to the impeller looked very squashed ..." Tests conducted by Hooker showed the original intake design was inefficient, limiting the performance of the supercharger.[28][nb 4] Hooker subsequently designed a new air intake duct with improved flow characteristics which increased maximum power at a higher altitude of over 19,000 feet (5,800 m); and also improved the design of both the impeller, and the diffuser which controlled the airflow to it. These modifications led to the development of the single-stage Merlin XX and 45 series.[29]

A significant advance in supercharger design was the incorporation in 1938 of a two-speed drive (designed by the French company Farman) to the impeller of the Merlin X.[30][nb 5] The later Merlin XX incorporated the two-speed drive as well as several improvements that enabled the production rate of Merlins to be increased.[32] The low-ratio gear, which operated from take-off to an altitude of 10,000 feet (3,050 m), drove the impeller at 21,597 rpm and developed 1,240 horsepower (925 kW) at that height; while the high gear's (25,148 rpm) power rating was 1,175 horsepower (876 kW) at 18,000 feet (5,490 m). These figures were achieved at 2,850 rpm engine speed using +9 pounds per square inch (1.66 atm) boost.[33]

In 1940, after receiving a request for a high-rated Merlin for use as an alternative engine to the turbocharged Hercules VIII used in the prototype high-altitude Vickers Wellington V bomber, Rolls-Royce started experiments on the design of a two-stage supercharger and an engine fitted with this was bench-tested in April 1941, eventually becoming the Merlin 60.[34] The basic design used a modified Vulture supercharger for the first stage while a Merlin 46 supercharger was used for the second.[35] A liquid-cooled intercooler on top of the supercharger casing was used to prevent the compressed air/fuel mixture from becoming too hot.[nb 6] Also considered was an exhaust-driven turbocharger but, although a lower fuel consumption was an advantage the added weight and the need to add extra ducting for the exhaust flow and waste-gates, meant that this option was rejected in favour of the two-stage supercharger.[36] Fitted with the two-stage two-speed supercharger, the Merlin 60 series gained 300 horsepower (224 kW) at 30,000 feet (9,144 m) over the Merlin 45 series,[35] at which altitude a Spitfire IX was nearly 70 miles per hour (113 km/h) faster than a Spitfire V.[37]

The two-stage Merlin family was extended in 1943 with the Merlin 66 which had its supercharger geared for increased power ratings at low altitudes, and the Merlin 70 series that were designed to deliver increased power at high altitudes.[38]

While the design of the two-stage supercharger forged ahead, Rolls-Royce also continued to develop the single-stage supercharger, resulting in 1942 in the development of a smaller "cropped" impeller for the Merlin 45M and 55M; both of these engines developed greater power at low altitudes.[39] In squadron service the LF.V variant of the Spitfire fitted with these engines became known as the "clipped, clapped and cropped Spitty" to indicate the shortened wingspan, the less-than-perfect condition of the used airframes and the cropped supercharger impeller.[40]

Carburettor developments
A rear view of an aircraft piston engine shows details of the induction system. The engine is sitting on a bespoke wooden pallet.
Carburettor, supercharger and intercooler detail of a preserved Packard V-1650-7 (Merlin 66)

The use of carburettors was calculated to give a higher specific power output, due to the lower temperature, hence greater density, of the fuel/air mixture compared to injected systems.[41] However, the Merlin's float controlled carburettor meant that both Spitfires and Hurricanes were unable to pitch nose down into a steep dive. The contemporary Bf 109E, which had direct fuel injection, could "bunt" into a high-power dive to escape attack, leaving the pursuing aircraft behind because its fuel had been forced out of the carburettor's float chamber by the effects of negative g-force (g). RAF fighter pilots soon learned to "half-roll" their aircraft before diving to pursue their opponents.[42] "Miss Shilling's orifice",[nb 7] a holed diaphragm fitted across the float chambers, went some way towards curing the fuel starvation in a dive; however, at less than maximum power a "fuel rich" mixture still resulted. Another improvement was made by moving the fuel outlet from the bottom of the S.U. carburettor to exactly halfway up the side, which allowed the fuel to flow equally well under negative or positive g.[43]

Further improvements were introduced throughout the Merlin range: 1943 saw the introduction of a Bendix-Stromberg pressure carburettor that injected fuel at 5 pounds per square inch (34 kPa; 0.34 bar) through a nozzle directly into the supercharger, and was fitted to Merlin 66, 70, 76, 77 and 85 variants. The final development, which was fitted to the 100-series Merlins, was an S.U. injection carburettor that injected fuel into the supercharger using a fuel pump driven as a function of crankshaft speed and engine pressures.[44]

Improved fuels

At the start of the war the Merlin I, II and III ran on the then standard 87 octane aviation spirit and could supply just over 1,000 horsepower (750 kW) from its 27-litre (1,650-cu in) displacement: the maximum boost pressure at which the engine could be run using 87 octane fuel was +6 pounds per square inch (141 kPa; 1.44 atm).[nb 8] However, as early as 1938, at the 16th Paris Air Show, Rolls-Royce displayed two versions of the Merlin rated to use 100 octane fuel. The Merlin R.M.2M was capable of 1,265 horsepower (943 kW) at 7,870 feet (2,400 m), 1,285 horsepower (958 kW) at 9,180 feet (2,800 m) and 1,320 horsepower (984 kW) on take-off; while a Merlin X with a two-speed supercharger in high gear generated 1,150 horsepower (857 kW) at 15,400 feet (4,700 m) and 1,160 horsepower (865 kW) at 16,730 feet (5,100 m).[45]

From late 1939, 100 octane fuel became available from the U.S., West Indies, Persia and domestically.[46] Merlin IIs and IIIs were adapted to run on the new fuel, using an increased boost pressure of +12 pounds per square inch (183 kPa; 1.85 atm). Small modifications were made to the engines which were now capable of generating 1,310 horsepower (977 kW) at 9,000 ft (2,700 m) while running at 3,000 revolutions per minute.[47][48] This increased boost was available for a maximum of five minutes, and if the pilot resorted to emergency boost he had to report this on landing and have it noted in the engine log book. Using +12 pounds per square inch (183 kPa; 1.85 atm) of boost was considered a "definite overload condition on the engine" and the engineering officer was subsequently required to examine the engine and reset the throttle gate.[49] Later versions of the Merlin ran only on 100 octane fuel and the five-minute combat limitation was raised to +18 pounds per square inch (224 kPa; 2.3 atm).[50]

In late 1943 trials were run of a new "100/150" grade (150 octane) fuel, recognised by its bright-green colour and "awful smell".[51] Initial tests were conducted using 6.5 cubic centimetres (0.23 imp fl oz) of tetraethyllead (T.E.L.) for every one imperial gallon of 100 octane fuel (or 1.43 cc/L or 0.18 U.S. fl oz/U.S. gal), but this mixture resulted in a build-up of lead in the combustion chambers, causing excessive fouling of the spark plugs. Better results were achieved by adding 2.5% mono methyl aniline (M.M.A.) to 100 octane fuel.[52] The new fuel allowed the five-minute boost rating of the Merlin 66 to be raised to +25 pounds per square inch (272 kPa; 2.7 atm).[53]

Starting in March 1944, the Merlin 66-powered Spitfire IXs of two squadrons were cleared to use the new fuel for operation trials, and it was put to good use in the summer of 1944 when it enabled Spitfire L.F. Mk. IXs to intercept V-1 flying bombs coming in at low altitudes,[53] as well as by other fighters flown by the ADGB, but continued problems with backfires were not remedied until August.

In early February 1945, Spitfires of the 2 TAF also began using 100/150 grade fuel.[54] Monty Berger, Senior Intelligence Officer of 126 (RCAF) Spitfire Wing, 2 TAF, noted that there were still problems being experienced with the new fuel on his wing, leading to several fatal accidents. Pilots were relieved when the return to 130 grade was authorised by April 1945.[54]

Production

Production of the Rolls-Royce Merlin was driven by the forethought and determination of Ernest Hives, who at times was enraged by the apparent complacency and lack of urgency encountered in his frequent correspondence with Air Ministry and local authority officials. Hives was an advocate of shadow factories, and sensing the imminent outbreak of war pressed ahead with plans to produce the Merlin in sufficient numbers for the rapidly expanding Royal Air Force. Despite the importance of uninterrupted production several factories were affected by industrial action.[55] By the end of its production run in 1950, almost 150,000 Merlin engines had been built; over 112,000 in Britain and more than 37,000 under license in the U.S.[nb 9][48]

Derby

Image of a red brick building with a central front door, the words Rolls-Royce Limited appear above the door in white letters
Rolls-Royce factory, Nightingale Road, Derby (photo 2005)

The existing Rolls-Royce facilities at Osmaston, Derby were not suitable for large-scale engine production although the floor space had been increased by some 25% between 1935 and 1939; nevertheless, Hives planned to build the first two- or three hundred engines there until engineering teething troubles had been resolved. Having a workforce that consisted mainly of design engineers and highly skilled men, the Derby factory carried out the majority of development work on the Merlin, with flight testing carried out at nearby RAF Hucknall. The original factory closed in March 2008, but Rolls-Royce plc still maintains a large presence in Derby.[56]

Crewe

To meet the increasing demand for Merlin engines, Rolls-Royce started building work on a new factory at Crewe in May 1938, with engines leaving the factory in 1939. The Crewe factory had convenient road and rail links to their existing facilities at Derby. Production at Crewe was originally planned to use unskilled labour and sub-contractors with which Hives felt there would be no particular difficulty, but the number of required sub-contracted parts such as crankshafts, camshafts and cylinder liners eventually fell short and the factory was expanded to manufacture these parts "in house".[57]

Initially the local authority promised to build 1,000 new houses to accommodate the workforce by the end of 1938, but by February 1939 it had only awarded a contract for 100. Hives was incensed by this complacency and threatened to move the whole operation, but timely intervention by the Air Ministry improved the situation. In 1940 a strike took place when women replaced men on capstan lathes, the workers' union insisting this was a skilled labour job; however, the men returned to work after 10 days.[58] Post-war the factory was used for the production of Bentley motor cars, and in 1998 Volkswagen AG bought both the marque and the factory. Today it is known as Bentley Crewe.[59]

Glasgow

An image of female workers on an engine assembly line
Female workers on the Hillington Merlin production line in 1942

Hives further recommended that a factory be built near Glasgow to take advantage of the abundant local work force and the supply of steel and forgings from Scottish manufacturers. This government-funded and -operated factory was built at Hillington starting in June 1939 with workers moving into the premises in October, one month after the outbreak of war, the factory becoming fully occupied by September 1940. A housing crisis also occurred at Glasgow where Hives again asked the Air Ministry to step in.[60]

Having 16,000 employees, the Glasgow factory was one of the largest industrial operations in Scotland. Unlike the Derby and Crewe plants which relied significantly on external subcontractors, it produced almost all the Merlin's components itself.[61] Engines began to leave the production line in November 1940, and by June 1941 monthly output had reached 200, increasing to more than 400 per month by March 1942.[62] In total 23,675 engines were produced. Worker absenteeism became a problem after some months due to the physical and mental effects of wartime conditions such as the frequent occupation of air-raid shelters. It was agreed to cut the punishing working hours slightly to 82 hours a week, with one half-Sunday per month awarded as holiday.[63] Record production is reported to have been 100 engines in one day.[64]

Immediately after the war the site repaired and overhauled Merlin and Griffon engines, and continued to manufacture spare parts.[64] Finally, following the production of the Rolls-Royce Avon turbojet and others, the factory was closed in 2005.[65]

Manchester

Having an abandoned factory in Trafford Park, Ford of Britain was approached about the possibility of converting it into an aircraft engine production unit by Herbert Austin, who was in charge of the shadow factory plan. Building work on a new factory was started in May 1940 on a 118-acre (48 ha) site, while Ford engineers went on a fact finding mission to Derby. Their chief engineer commented to Sir Stanley Hooker that the tolerances used were far too wide for them, and so the 20,000 drawings would need to be redrawn to Ford tolerance levels, which took over a year.[66] Ford's factory was built with two distinct sections to minimise potential bomb damage, it was completed in May 1941 and bombed in the same month. At first, the factory had difficulty in attracting suitable labour, and large numbers of women, youths and untrained men had to be taken on. Despite this, the first Merlin engine came off the production line one month later[67] and it was building the engine at a rate of 200 per week by 1943, at which point the joint factories were producing 18,000 Merlins per year.[27] Ford’s investment in machinery and the redesign resulted in the 10,000 man-hours needed to produce a Merlin dropping to 2,727 in three years, while unit cost fell from £6,540 in June 1941 to £1,180 by the war’s end. In his autobiography Not much of an Engineer, Sir Stanley Hooker states: "... once the great Ford factory at Manchester started production, Merlins came out like shelling peas. The percentage of engines rejected by the Air Ministry was zero. Not one engine of the 30,400 produced was rejected ...".[68] Some 17,316 people worked at the Trafford Park plant, including 7,260 women and two resident doctors and nurses.[67] Merlin production started to run down in August 1945, and finally ceased on 23 March 1946.[69]

Packard V-1650

As the Merlin was considered to be so important to the war effort, negotiations were soon started to establish an alternative production line outside the UK. Rolls-Royce staff visited a number of North American automobile manufacturers in order to select one to build the Merlin in the U.S. or Canada. Henry Ford rescinded an initial offer to build the engine in the U.S. in July 1940, and the Packard Motor Car Company was subsequently selected to take on the $130,000,000 Merlin order.[nb 10][70] Agreement was reached in September 1940, and the first Packard-built engine, designated V-1650-1, ran in August 1941.[71]

Variants

This is a list of representative Merlin variants, describing some of the mechanical changes made during development of the Merlin. Engines of the same power output were typically assigned different model numbers based on supercharger or propeller gear ratios, differences in cooling system or carburettors, engine block construction, or arrangement of engine controls.[72] Power ratings quoted are usually maximum "military" power. All but the Merlin 131 and 134 engines were "right-hand tractor", i.e. the propeller rotated clockwise when viewed from the rear. In addition to the mark numbers, Merlin engines were allocated experimental numbers by the Ministry of Supply (MoS) - e.g.: RM 8SM for the Merlin 61 and some variants - while under development; these numbers are noted where possible.[73]

Data from Bridgman (Jane's)[74] unless otherwise noted:

  • Merlin II (RM 1S)
1,030 hp (775 kW) at 3,000 rpm at 5,500 ft (1,680 m) using + 6 psi boost (41 kPa gauge; or an absolute pressure of 144 kPa or 1.41 atm); used 100% glycol coolant. First production Merlin II delivered 10 August 1937.[18] Merlin II used in the Boulton Paul Defiant, Hawker Hurricane Mk.I, Supermarine Spitfire Mk.I fighters, and Fairey Battle light bomber.[75]
  • Merlin III (RM 1S)
Merlin III fitted with "universal" propeller shaft able to mount either de Havilland or Rotol propellers,.[76] From late 1939, using 100 octane fuel and +12 psi boost (83 kPa gauge; or an absolute pressure of 184 kPa or 1.82 atm), the Merlin III developed 1,310 hp (977 kW) at 3,000 rpm at 9,000 ft (2,700 m);[47] using 87 octane fuel the power ratings were the same as the Merlin II. Used in the Defiant, Hurricane Mk.I, Spitfire Mk.I fighters, and Battle light bomber.[75] First production Merlin III delivered 1 July 1938.[18]
  • Merlin X (RM 1SM)
1,130 hp (840 kW) at 3,000 rpm at 5,250 ft (1,525 m); maximum boost pressure +10 psi; this was the first production Merlin to use a two-speed supercharger; Used in Halifax Mk.I, Wellington Mk.II, and Whitley Mk.V bombers. First production Merlin X, 5 December 1938.[18]
A left side view of a gloss grey -painted aircraft piston engine on static display
Preserved Merlin XX at the Royal Air Force Museum London
  • Merlin XII (RM 3S)
1,150 hp (860 kW); fitted with Coffman engine starter; first version to use 70/30% water/glycol coolant rather than 100% glycol. Reinforced construction, able to use constant boost pressure of up to +12 psi using 100 octane fuel; Used in Spitfire Mk.II.[76] First production Merlin XII, 2 September 1939.[18]
  • Merlin XX (RM 3SM)
1,480 hp (1,105 kW) at 3,000 rpm at 6,000 ft (1,830 m); two-speed supercharger; boost pressure of up to +14 psi; Used in Hurricane Mk.II, Beaufighter Mk.II, s, Halifax Mk.II and Lancaster Mk.I bombers, and in the Spitfire Mk.III prototypes (N3297 & W3237).[77] First production Merlin XX, 4 July 1940.[18][nb 11]
  • Merlin 32 (RM 5M)
1,645 hp (1,230 kW) at 3,000 rpm at 2,500 ft (760 m); first "low altitude" version of Merlin with cropped supercharger impellers for increased power at lower altitudes; fitted with Coffman engine starter; used mainly in Fleet Air Arm aircraft, mainly the Fairey Barracuda Mk.II torpedo bomber and Fairey Fulmar and Supermarine Seafire F. Mk.IIc fighters. Also Hurricane Mk.V and Spitfire P.R Mk.XIII.[76] First production Merlin 32, 17 June 1942.[18]
  • Merlin 45 (RM 5S)
1,515 hp (1,130 kW) at 3,000 rpm at 11,000 ft (3,353 m); used in Spitfire Mk.V, PR.Mk.IV and PR.Mk.VII, Seafire Ib and IIc. Maximum boost pressure of +16 psi. First production Merlin 45, 13 January 1941.[18]
  • Merlin 47 (RM 6S)
1,415 hp (1,055 kW) at 3,000 rpm at 14,000 ft (4,270 m); high-altitude version used in Spitfire H.F.Mk.VI. Adapted with a Marshall compressor (often called a "blower") to pressurise the cockpit. First production Merlin 47, 2 December 1941.[18]
  • Merlin 50.M (RM 5S)
1,585 hp (1,182 kW) at 3,000 rpm at 3,800 ft (1,160 m); low-altitude version with supercharger impeller "cropped" to 9.5 in (240 mm) in diameter. Permitted boost was +18 psi (125 kPa gauge; or an absolute pressure of 225 kPa or 2.2 atm) instead of +16 psi (110 kPa gauge; or an absolute pressure of 210 kPa or 2.08 atm) on a normal Merlin 50 engine.[78][79] Merlin 50 series was first to use the Bendix-Stromberg "negative-g" carburettor.[80]
  • Merlin 61 (RM 8SM)
1,565 hp (1,170 kW) at 3,000 rpm at 12,250 ft (3,740 m)
1,390 hp (1,035 kW) at 3,000 rpm at 23,500 ft (7,170 m); fitted with a new two-speed two-stage supercharger providing increased power at medium to high altitudes; used in Spitfire F Mk.IX, and P.R Mk.XI.[81] First British production variant to incorporate two-piece cylinder blocks designed by Rolls-Royce for the Packard Merlin.[82] First production Merlin 61, 2 March 1942.[18]
Audio of RR Merlin 66/266 starting.
  • Merlin 66 (RM 10SM)
1,720 hp (1,283 kW) at 5,790 ft (1,760 m) using +18 psi boost (124 kPa gauge; or an absolute pressure of 225 kPa or 2.2 atm); low-altitude version of Merlin 61. Fitted with a Bendix-Stromberg anti-g carburettor;[83] used in Spitfire L.F Mk.VIII and L.F Mk.IX.[78]
  • Merlin 76/77 (RM 16SM)[36]
1,233 hp (920 kW) at 35,000 ft (11,000 m);[36] Fitted with a two-speed, two-stage supercharger and a Bendix-Stromberg carburettor. Dedicated "high altitude" version used in the Westland Welkin high-altitude fighter and some later Spitfire and de Havilland Mosquito variants. The odd-numbered mark drove a blower for pressurising the cockpit.
  • Merlin 130/131
2,060 hp (1,536 kW); redesigned "slimline" versions for the de Havilland Hornet. Engine modified to decrease frontal area to a minimum and was the first Merlin series to use down-draught induction systems. Coolant pump moved from the bottom of the engine to the starboard side. Two-speed, two-stage supercharger and S.U. injection carburettor. Maximum boost was 25 psi (170 kPa gauge; or an absolute pressure of 270 kPa or 2.7 atm). On the Hornet the Merlin 130 was fitted in the starboard nacelle: the Merlin 131, fitted in the port nacelle, was converted to a "reverse" or left-hand tractor engine using an additional idler gear in the reduction gear casing.[84]
  • Merlin 133/134
2,030 hp (1,514 kW); derated 130/131 variants used in Sea Hornet F. Mk. 20, N.F. Mk. 21 and P.R. Mk. 22. Maximum boost was lowered to +18 psi gauge (230 kPa or 2.2 atm absolute).
  • Merlin 266 (RM 10SM)
The prefix "2" indicates engines built by Packard, otherwise as Merlin 66, optimised for low-altitude operation. Fitted to the Spitfire Mk.XVI.[78]
  • Merlin 620
1,175 hp (876 kW) continuous cruising using 2,650 rpm at +9 psi boost (62 kPa gauge; or an absolute pressure of 165 kPa or 1.6 atm); capable of emergency rating of 1,795 hp (1,338 kW) at 3,000 rpm using +20 psi boost (138 kPa gauge; or an absolute pressure of 241 kPa or 2.4 atm) ; civilian engine developed from Merlin 102; two-stage supercharger optimised for medium altitudes, and used an S.U. injection carburettor. "Annular" radiator installation development of that used on Avro Lincoln. The Merlin 620-621 series was designed to operate in the severe climatic conditions encountered on Canadian and long-range North Atlantic air routes. Used in Avro Tudor, Avro York, and the Canadair North Star.[85]

Applications

In chronological order, the first operational aircraft powered by the Merlin to enter service were the Fairey Battle, Hawker Hurricane and Supermarine Spitfire.[86] Although the engine is most closely associated with the Spitfire, the four-engined Avro Lancaster was the most numerous application, followed by the twin-engined de Havilland Mosquito.[87]

List from Lumsden 2003 [88][nb 12]

An inflight image of a four-engined bomber aircraft
Avro Lancaster B I powered by four Merlin XXs
An inflight image of a twin-engined monoplane aircraft
The "slimline" Merlin 130/131 series were designed for the de Havilland Hornet
An inflight image of a twin-engined monoplane aircraft. The aircraft has a camouflaged paint scheme.
The Merlin 76-powered Vickers F.7/41

Postwar

At the end of World War II, new versions of the Merlin (the 600- and 700-series) were designed and produced for use in commercial airliners such as the Avro Tudor, military transport aircraft such as the Avro York, and the Canadair North Star which performed in both roles. These engines were basically military specification with some minor changes to suit the different operating environment.[89]

A Spanish-built version of the Messerschmitt Bf 109 G-2, the 1954 Hispano Aviación HA-1112-M1L Buchon, was built in Hispano's factory in Seville with the Rolls-Royce Merlin 500/45 engine of 1,600 horsepower (1,200 kW) – a fitting powerplant for the last-produced version of the famous Messerschmitt fighter, as the Bf 109 V1 prototype aircraft had been powered by the Rolls-Royce Kestrel V-12 engine in 1935.[90]

The CASA 2.111 was another Spanish-built version of a German aircraft, the Heinkel He 111, that was adapted to use the Merlin after the supply of Junkers Jumo 211F-2 engines ran out at the end of the war.[91] A similar situation existed with the Fiat G.59 when available stocks of the Italian licence-built version of the Daimler-Benz DB 605 engine ran short.[92]

Alternative applications

A non-supercharged version of the Merlin using a larger proportion of steel and iron components was produced for use in tanks. This engine, the Rolls-Royce Meteor, in turn led to the smaller Rolls-Royce Meteorite.[93]

In 1938, Rolls-Royce started work on modifying some Merlins which were later to be used in British MTBs, MGBs, and RAF Air-Sea Rescue Launches. For these the superchargers were modified single-stage units and the engine was re-engineered for use in a marine environment.[94]

Experiments were carried out by the Irish Army involving replacing the Bedford engine of a Churchill tank with a Rolls-Royce Merlin engine salvaged from an Irish Air Corps Seafire aircraft. The experiment was not a success, although the reasons are not recorded.[95]

Survivors

One of the most successful of the World War II era aircraft engines, the Merlin continues to be used in many restored World War II vintage aircraft all over the world. The Royal Air Force Battle of Britain Memorial Flight is a notable current operator of the Merlin. In England the Shuttleworth Collection owns and operates a Merlin-powered Hawker Sea Hurricane IB and a Supermarine Spitfire VC – the Hurricane can be seen flying at home displays throughout the summer months, while the Spitfire is currently undergoing a major restoration project.[96][97]

Engines on display

Merlin24 ground demonstration

Many aerospace museums possess examples of the Merlin that are on public display:

Specifications (Merlin 61)

A front right view of a Vee twelve aircraft piston engine centred around a large propeller shaft has components labelled by black lines to each component description. Labelled components include the propeller reduction gearbox, exhaust ports, spark plugs and the coolant pump
Rolls-Royce Merlin with components labelled

Data from Jane's[98]

General characteristics

  • Type: 12-cylinder, supercharged, liquid-cooled, 60° "Vee", piston aircraft engine.
  • Bore: 5.4 in (137.16 mm)
  • Stroke: 6.0 in (152.4 mm)
  • Displacement: 1,647 cu in (27 L)
  • Length: 88.7 in (225.3 cm)
  • Width: 30.8 in (78.1 cm)
  • Height: 40 in (101.6 cm)
  • Dry weight: 1,640 lb (744 kg)[nb 13]

Components

  • Valvetrain: Overhead camshaft, two intake and two exhaust valves per cylinder, sodium-cooled exhaust valve stems.
  • Supercharger: Two-speed, two-stage. Boost pressure automatically linked to the throttle, coolant-air aftercooler between the second stage and the engine.
  • Fuel system: Twin-choke updraught Rolls-Royce/S.U. carburettor with automatic mixture control. Twin independent fuel pumps.
  • Fuel type: 100/130 Octane petrol.
  • Oil system: Dry sump with one pressure pump and two scavenge pumps.
  • Cooling system: 70% water and 30% ethylene glycol coolant mixture, pressurised. Supercharger intercooler system entirely separate from main cooling system.[82]
  • Reduction gear: 0.42:1

Performance

  • Power output: * 1,290 hp (962 kW) at 3,000 rpm at take-off.
    • 1,565 hp (1,167 kW) at 3,000 rpm at 12,250 ft (3,740 m, MS gear)[nb 14]
    • 1,580 hp (1,178 kW) at 3,000 rpm at 23,500 ft (7,200 m, FS gear)
  • Specific power: 0.96 hp/cu in (43.6 kW/L)
  • Compression ratio: 6:1
  • Fuel consumption: Minimum 39 Imp gal/h (177 L/h), maximum 88 Imp gal/h (400 L/h)[nb 15]
  • Power-to-weight ratio: 0.96 hp/lb (1.58 kW/kg) at maximum power.

See also

Related development

Comparable engines
Related lists

References

Footnotes

  1. ^ In descending order of total number used.
  2. ^ The naming tradition was started by managing director, Claude Johnson, in 1915 with the Eagle, Hawk and Falcon engines. There is no connection to King Arthur's legendary magician.
  3. ^ Because of an accelerated design process the timelines of Merlin development overlapped; for example, the two-stage supercharger was being designed before there was a need to introduce the modified Merlin 45M and 55Ms to counteract the threat of the Focke-Wulf Fw-190.
  4. ^ The function of the supercharger is to compress the fuel/air mixture entering the engine cylinders; any pressure loss to the impeller (also called the rotor) would impair the supercharger's efficiency.
  5. ^ Rolls-Royce took out a license in 1938 to build the two-speed drive.[31]
  6. ^ A hot mixture could either pre-ignite before reaching the engine's cylinders or detonate in the engine.
  7. ^ Invented in March 1941 by Beatrice Shilling, an engineer at the Royal Aircraft Establishment, Farnborough.
  8. ^ The British measured boost pressure as lbf/sq in (or psi), and commonly referred to it simply as "pounds" of boost. The normal atmospheric pressure at sea level is 14.5 psi (1,000 mbar), so a reading of +6 means that the air/fuel mix is being compressed by a supercharger blower to 20.5 psi before entering the engine; +25 means that the air/fuel mix is now being compressed to 39.5 psi.
  9. ^ Factory production numbers:
    • Rolls-Royce: Derby = 32,377
    • Rolls-Royce: Crewe = 26,065
    • Rolls-Royce: Glasgow =23,675
    • Ford Manchester= 30,428
    • Packard Motor Corp = 55,523 (37,143 Merlins, 18,380 V-1650s)
    • Overall: 168,068
  10. ^ Value in 1940 U.S. dollars.
  11. ^ In August 1940 drawings of the Merlin XX were sent to the Packard Motor Car Company and used as the basis for the Packard Merlin 28.[18]
  12. ^ Lumsden covers British aircraft only, the Merlin may not be the main powerplant for these types.
  13. ^ Plus 2.5% tolerance
  14. ^ MS and FS refer to the supercharger blower speeds: Moderate/Fully Supercharged.
  15. ^ Ref: A.P. 1565E, pilots notes for Spitfire V, dependant on throttle, mixture and boost settings.

Citations

  1. ^ Beckles 1941, pp. 78–79. (1940 prices, unadjusted for inflation).
  2. ^ The Spitfire and Merlin icons.org.uk. Retrieved: 14 August 2009
  3. ^ Pugh 2000, pp. 192–198.
  4. ^ Merlin Engines in Manchester bbc.co.uk. Retrieved: 14 August 2009
  5. ^ Rubbra 1990, p. 64.
  6. ^ a b c d Lumsden 2003, p. 203.
  7. ^ Mason 1991, p. 168.
  8. ^ McKinstry 2007, p. 53.
  9. ^ Gunston 1989, p. 137.
  10. ^ Rubbra 1990, p. 139.
  11. ^ Lumsden 2003, pp. 198–200.
  12. ^ Lumsden 2003, p. 200.
  13. ^ Rubbra 1990, p. 118.
  14. ^ Rubbra 1990, pp. 64–117.
  15. ^ Rubbra 1990, pp. 82–92.
  16. ^ Morgan and Shacklady 2000, p. 607.
  17. ^ a b c Lumsden 2003, p. 204.
  18. ^ a b c d e f g h i j k l Morgan and Shacklady 2000, p. 610.
  19. ^ Fozard 1991, p. 125.
  20. ^ Fozard 1991, pp. 127, 165.
  21. ^ Flight 1946, p. 93.
  22. ^ Bridgman 1998, pp. 280–281.
  23. ^ Lovesey 1946, pp. 224–226.
  24. ^ Price 1982, p. 51.
  25. ^ Tanner 1981, A.P.1565E, Vol.1, Section II.
  26. ^ Lovesey 1946, p. 218.
  27. ^ a b Lumsden 2003, p. 201.
  28. ^ Hooker 1984, p. 45.
  29. ^ Hooker 1984, pp. 46–50, 52, 235–247.
  30. ^ Lumsden 2003, p. 206.
  31. ^ Rubbra 1990, p. 71.
  32. ^ Smith February 1942 p. b.
  33. ^ Smith February 1942 p. d.
  34. ^ King 1954, p. 578.
  35. ^ a b Lovesey 1946, p. 220.
  36. ^ a b c Lovesey 1946, p. 219.
  37. ^ Price 1982, pp. 142, 167.
  38. ^ Price 1982, pp. 153–154, 170.
  39. ^ Lumsden 2003, p. 210.
  40. ^ Price 1982, p. 135.
  41. ^ Hooker 1984, p. 62.
  42. ^ McKinstry 2007, p. 205.
  43. ^ Smallwood 1996, p. 135.
  44. ^ Lumsden 2003, p. 212.
  45. ^ Flight 1938, p. 528.
  46. ^ Payton-Smith 1971, pp. 259–260.
  47. ^ a b Harvey-Bailey 1995, p. 155.
  48. ^ a b Gunston, p. 144.
  49. ^ Air Ministry 1940.
  50. ^ Air Ministry 1943, p. 25.
  51. ^ McKinstry 2007, p. 356.
  52. ^ Lovesey 1946, pp. 222–223.
  53. ^ a b Price 1982. p. 170.
  54. ^ a b Berger and Street 1994. p. 199.
  55. ^ McKinstry 2007, pp. 327–329.
  56. ^ Derby factory closure news.bbc.co.uk. Retrieved: 24 August 2009
  57. ^ Pugh 2000, p. 193.
  58. ^ Pugh 2000, pp. 196–197.
  59. ^ Crewe factory history jackbarclayparts.co.uk. Retrieved: 24 August 2009
  60. ^ Pugh 2000, p. 197.
  61. ^ Lloyd and Pugh 2004, p. 61.
  62. ^ Lloyd and Pugh 2004, p. 69.
  63. ^ Pugh 2000, p. 198.
  64. ^ a b End of era for Rolls-Royce plant. news.bbc.co.uk. Retrieved: 25 August 2009
  65. ^ Hillington factory history rolls-royce.com. Retrieved: 24 August 2009
  66. ^ Sir Stanley Hooker. Not much of an Engineer. The Crowood Press Ltd. ISBN 1853102857. 
  67. ^ a b Nicholls 1996, p. 103.
  68. ^ Hooker 1984, pp. 58–59.
  69. ^ Nicholls 1996, p. 105.
  70. ^ Time Magazine (8 July 1940) – Business: Ford's Rolls-Royces. time.com. Retrieved: 26 August 2009
  71. ^ Lumsden 2003, p. 202.
  72. ^ Bridgman 1998, p. 283.
  73. ^ Morgan and Shacklady 2000, p. 608.
  74. ^ Bridgman 1998, pp. 281–283.
  75. ^ a b Bridgman 1998, p. 281.
  76. ^ a b c Robertson 1973, p. 144.
  77. ^ Morgan and Shacklady 2000, p. 129.
  78. ^ a b c Robertson 1973, p. 145.
  79. ^ Price 1982, p. 145.
  80. ^ Matusiak 2004, p. 10.
  81. ^ Smith 1942, pp. 655–659.
  82. ^ a b Smith 1942, p. 656.
  83. ^ Air Ministry 1943, p. 6.
  84. ^ Flight 1946, pp. 92–94.
  85. ^ Flight July 1946, p. 99.
  86. ^ Lumsden 2003, p. 205.
  87. ^ Lumsden 2003, pp. 208–209.
  88. ^ Lumsden 2003, pp. 203–215.
  89. ^ Lumsden 2003, pp. 214–215.
  90. ^ Lumsden 2003, p. 214.
  91. ^ Wilson, Randy. It's a Heinkel: the Luftwaffe's workhorse Heinkel 111 bomber rwebs.net, The Dispatch. Volume 12, Number 4, Winter 1996. Retrieved: 6 September 2009
  92. ^ Green and Swanborough 1994, p. 211.
  93. ^ Pugh 2000, p. 254.
  94. ^ Marine history. rolls-royce.com. Retrieved: 21 August 2009
  95. ^ Martin 2002, p. 58.
  96. ^ Shuttleworth Collection – Hawker Sea Hurricane IB shuttleworth.org. Retrieved: 1 July 2011
  97. ^ Shuttleworth Veteran Aeroplane Society (SVAS) – Spitfire restoration svasweb.org. Retrieved: 14 August 2009
  98. ^ Bridgman 1998, pp. 280–282.

Bibliography

  • Air Ministry. A.P 1509B/J.2-W Merlin II and III Aero Engines (June 1940). London: Air Ministry, 1940.
  • Air Ministry. A.P 1565B Spitfire IIA and IIB Aeroplanes: Merlin XII Engine, Pilot's Notes (July 1940). London: Air Data Publications, 1972 (reprint). ISBN 0-85979-043-6.
  • Air Ministry. Pilot's Notes for Spitfire Mark F.VII – Merlin 64 or 71 engine; Mark F.VIII – Merlin 63,66 or 70 engine. Air Publication 1565G & H -P.N. London, UK: Air Ministry, December 1943.
  • Beckles, Gordon. Birth of a Spitfire: The Story of Beaverbook's Ministry and its First £10,000,000. London: Collins Clear-Type Press, 1941.
  • Berger, Monty and Street, Brian Jeffrey. Invasion Without Tears. Toronto, Canada: Random House, 1994 (1st ed) ISBN 0-394-22277-6.
  • Bridgman, L. Jane's Fighting Aircraft of World War II. London: Crescent, 1998. ISBN 0-517-67964-7
  • Fozard, John W.Sydney Camm and the Hurricane; Perspectives on the master fighter designer and his finest achievement. Shrewsbury, Shropshire, UK: Airlife, 1991. ISBN 1-85310-270-9.
  • Green, William and Swanborough, Gordon. The Complete Book of Fighters. New York: Smithmark Publishers Inc., 1994. ISBN 0-8317-3939-8.
  • Gunston, Bill. World Encyclopedia of Aero Engines (3rd edition). Sparkford, Somerset, UK: Patrick Stephens Limited, 1995. ISBN 1-85260-509-X.
  • Harvey-Bailey, A. The Merlin in Perspective – the combat years. Derby, England: Rolls-Royce Heritage Trust, 1983. ISBN 1-872922-06-6
  • Hooker, Stanley Not Much of an Engineer London: Airlife, 1984. ISBN 1-85310-285-7.
  • King, H. F. "The Two R's: A Commemorative History of Rolls-Royce Aero Engines. (article and images)." Flight No. 2363, Volume 65, 7 May 1954.
  • Lloyd, Ian and Pugh, Peter. Hives & the Merlin. Cambridge, England: Icon Books, 2004. ISBN 1-84046-644-8
  • Lovesey, A C. "Development of the Rolls-Royce Merlin from 1939 to 1945." Aircraft Engineering and Aerospace Technology, Volume 18, Issue 7. London, MCB UP Ltd., July 1946. ISSN 0002-2667.
  • Lumsden, Alec. British Piston Engines and their Aircraft. Marlborough, Wiltshire: Airlife Publishing, 2003. ISBN 1-85310-294-6.
  • Martin, Karl. Irish Army Vehicles, Transport and Armour since 1922. 2002. ISBN 0-9543413-0-9.
  • Mason, Francis K. Hawker Aircraft Since 1920 (3rd revised edition). London, UK: Putnam, 1991. ISBN 0-85177-839-9.
  • Matusiak, Wojtek. Supermarine Spitfire Mk V: Mushroom Model Magazine Special, No. 6111. Redbourn, UK: Mushroom Model Publications, 2004. ISBN 83-917178-3-6
  • McKinstry, Leo. Spitfire – Portrait of a Legend. London: John Murray, 2007. ISBN 0-7195-6874-9.
  • Morgan, Eric B. and Edward Shacklady. Spitfire: The History. London: Key Publishing, 2000. ISBN 0-946219-48-6.
  • Nicholls, Robert. Trafford Park: the First Hundred Years. Phillimore & Co. Ltd., 1996. ISBN 1-86077-013-4.
  • Payton-Smith, D J. Oil: A Study of War-time Policy and Administration. London: Her Majesty's Stationery Office, 1971.
  • Price, Alfred. The Spitfire Story. London: Jane's Publishing Company Ltd., 1982. ISBN 0-86720-624-1.
  • Pugh, Peter. The Magic of a Name – The Rolls-Royce Story – The First 40 Years. Cambridge, England. Icon Books Ltd, 2000. ISBN 1-84046-151-9.
  • Robertson, Bruce. Spitfire: The Story of a Famous Fighter. Hemel Hempstead, Hertfordshire, UK: Model & Allied Publications Ltd., 1960. Third revised edition 1973. ISBN 0-900435-11-9.
  • Rubbra, A.A. Rolls-Royce piston aero engines: A designer remembers. Derby, England: Rolls-Royce Heritage Trust, 1990. ISBN 1-872922-00-7.
  • Smallwood, Hugh. Spitfire in Blue. London: Osprey Aerospace, 1996. ISBN 1-85532-615-9.
  • Smith, G. Geoffrey. "A British Masterpiece. (article and images)." Flight No. 1731, Volume XLI, 26 February 1942.
  • Smith, G. Geoffrey. "Rolls-Royce Merlin 'Sixty-One' (article and images)." Flight No. 1773, Volume XLII, 17 December 1942.
  • Tanner, John. The Spitfire V Manual (AP1565E reprint). London: Arms and Armour Press, 1981. ISBN 0-85368-420-0.
  • "Some Trends in engine design (article and images)." Flight No. 1563, Volume XXXIV, 8 December 1938.
  • "Rolls-Royce Merlin 130 Series (article and images)." Flight No. 1935, Volume XLIX, 24 January 1946.
  • "Two New Power Units (article and images)." Flight and The Aircraft Engineer No. 1961, Volume L, 25 July 1946.

Further reading

  • Gunston, Bill. Development of Piston Aero Engines. Cambridge: Patrick Stephens, 2006. ISBN 0-7509-4478-1
  • Henshaw, Alex. Sigh for a Merlin: Testing the Spitfire. London: Crecy, 1999 (2nd revised edition). ISBN 0-947554-83-1.
  • Jackson, Robert. The Encyclopedia of Military Aircraft Bath, UK: Parragon Books, 2006. ISBN 1-4054-2465-6.
  • Price, Alfred. Spitfire Mark I/II Aces 1939–41. London: Osprey Aerospace, 1996. ISBN 1-85532-627-2.

External links


Wikimedia Foundation. 2010.

Игры ⚽ Нужно сделать НИР?

Look at other dictionaries:

  • Rolls Royce Merlin — Saltar a navegación, búsqueda Merlin Tipo motor aeronáutico V 12 enfriado por líquido Fabricante …   Wikipedia Español

  • Rolls-Royce Merlin — Rolls Royce Merlin …   Deutsch Wikipedia

  • Rolls-royce merlin — Pour les articles homonymes, voir Merlin. La lignée des Rolls Royce Merlin est une famille de moteurs d aviation, mis au point lors des années 1930 par la firme britannique pour combler un manque dans sa gamme entre les Rolls Royce Kestrel de… …   Wikipédia en Français

  • Rolls Royce Merlin — Pour les articles homonymes, voir Merlin. La lignée des Rolls Royce Merlin est une famille de moteurs d aviation, mis au point lors des années 1930 par la firme britannique pour combler un manque dans sa gamme entre les Rolls Royce Kestrel de… …   Wikipédia en Français

  • Rolls-Royce Merlin — Производитель: Rolls Royce Limited Годы производства: 1933 год …   Википедия

  • Rolls-Royce Merlin — Pour les articles homonymes, voir Merlin. La lignée des Rolls Royce Merlin est une famille de moteurs d avion, mis au point lors des années 1930 par la firme britannique Rolls Royce pour combler un manque dans sa gamme entre les Rolls Royce… …   Wikipédia en Français

  • Rolls-Royce plc — Rolls Royce Group plc Unternehmensform PLC Gründung 1906 …   Deutsch Wikipedia

  • Rolls Royce — Group plc Unternehmensform PLC Gründung 1906 …   Deutsch Wikipedia

  • Rolls Royce Peregrine — Saltar a navegación, búsqueda Peregrine Tipo motor de pistones V12 Fabricante Rolls Royce Primer encendido 1938 Principal …   Wikipedia Español

  • Rolls-Royce (Triebwerke) — Rolls Royce Group plc Rechtsform PLC ISIN GB0032836487 Gründung …   Deutsch Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”