Belt-drive turntable


Belt-drive turntable

There are two main types of phonograph turntable drives still being manufactured today, the belt-drive and direct-drive systems; the names are based upon the type of motor system found in each.

In a belt drive turntable the motor is located under and to the side of the platter and is connected to the platter by an elastomeric belt.

The design of the belt drive turntable allows the use of a less expensive motor than the direct-drive turntable. Also, the elastomeric belt absorbs motor vibrations which would otherwise be picked up by the stylus.

Rotational stability

This is an absolute goal of audiophile turntables, many of which are belt-driven. Problems with belt instability and deterioration in the past have largely been solved by use of modern elastic polymers.

Many belt-drive turntables having multiple speeds used a simple mechanical system to change speeds, using a mechanism to move the belt between different-sized pulleys on the motor shaft. It is difficult to design multiple-speed synchronous motors whose speed can be controlled electronically. Consequently, turntables with electronics providing speed control are nowadays most frequently used with DC servomotors. DC servomotors rotate in steps rather than continuously. This is referred to as 'cogging', and can add noise during playback. Helical armature motors can be used to overcome this. On some designs, the manufacturer prefers to ensure pitch stability by generating its own sinusoidal waveform to power the motor. Others attempt to achieve this by using optical sensors on the platter which feed back to the electronics to ensure the speed of the platter remains stable.

Belt-drive types

Some turntables, such as the Rega Planar series, use a fixed plinth with the motor and bearing attached to the same flat surface, usually constructed of wood, metal or acrylic, without suspension. Others, such as the Linn Sondek LP12, have a suspension.

uspended-sub-chassis

The "suspended sub-chassis" design, the principle of which is that the turntable is an inert platform which allows the stylus to track accurately relative to the surface of the record whilst being protected from external vibrations. The platter, sub-chassis, armboard and tonearm mechanically form a closed loop, and sit on top of dampers (usually three springs) which isolate the sub-assembly from its top plate and base. The motor, mounted (directly or indirectly) on the top plate, drives the turntable platter "via" a belt. The tonearm is usually sold separately, allowing for buyer choice and upgrades.

Bearings, mounted on the sub-chassis, generally use an oil film to lubricate between a metal ball-bearing connected to the platter by a spindle and the thrust-plate of the bearing's housing. More esoteric designs use an air bearing, where the spindle is supported by a high pressure flow of air [ [http://www.stereophile.com/analogsourcereviews/785/index6.html Versa Dynamics 2.0 LP player] , J. Gordon Holt, Page 7, Stereophile, Vol.10 No.8 December, 1987] .

Disadvantages

Over time the drive belt can wear or lose elasticity, and begin to slip, causing variations in the platter speed. In addition, belt drive turntables have much lower torque; the belt can also slip off the motor and/or platter spindle, and are thus not suitable for turntablism. DJs who scratch or mix generally prefer to use direct-drive turntables.

References


Wikimedia Foundation. 2010.

Look at other dictionaries:

  • Direct-drive turntable — A Technics SL 1200 turntable, a direct drive model widely used in DJing. A direct drive turntable is one of two main phonograph designs being manufactured today. The other style is the belt drive turntable. Each name is based upon the type of… …   Wikipedia

  • Direct drive mechanism — A Direct drive mechanism is one that takes the power coming from a motor without any reductions (such as a gearbox). Contents 1 Advantages 2 Disadvantages 3 Applications 3.1 High speed …   Wikipedia

  • Garrard Transcription Turntable — The Garrard Transcription Turntable was the first transcription turntable from the Garrard Engineering and Manufacturing Company that supported all extant commercial playback formats the 33, 45 and 78 rpm records of the time. The first model was… …   Wikipedia

  • P-28 turntable — The P 28 is a simply built belt drive two speed semi automatic turntable that sits atop the 28 Series lineup of component units. It is capable of playing 33 1/3 and 45 RPM records and requires a spindle adapter to play the latter. The P 28… …   Wikipedia

  • Phonograph — Turntable redirects here. For other uses, see Turntable (disambiguation). Edison cylinder phonograph ca. 1899 …   Wikipedia

  • Электрофон — Проигрыватель виниловых дисков (грампластинок) …   Википедия

  • Roksan Audio — Infobox Company company name = ROKSAN AUDIO LIMITED company company type = private limited company foundation = August 9, 1995 location = Alperton, England, UK key people = Touraj Moghaddam Tufan Hashemi industry = Manufacture TV radio, sound or… …   Wikipedia

  • Acoustic Research — was a Cambridge, Massachusetts based company that manufactured high end audio equipment. The brand is now owned by Audiovox. Acoustic Research was well known for the AR 3 series of speaker systems, which used the 12 inch (305 mm) acoustic… …   Wikipedia

  • Jukebox — For other uses, see Jukebox (disambiguation). A Zodiac jukebox …   Wikipedia

  • Juicy the Emissary — Infobox musical artist | Name = Juicy The Emissary Img capt = Juicy in London, England (2005) Img size = 200px Background = Hip Hop artist and producer Origin = Denton, Texas, USA Genre = Hip hop, [North Texas Independent Hip Hop] Occupation =… …   Wikipedia


Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”

We are using cookies for the best presentation of our site. Continuing to use this site, you agree with this.