Sven Gustaf Wingqvist

Sven Gustaf Wingqvist

Sven Gustaf Wingqvist (1876-1953) was a Swedish engineer, inventor and industrialist, and one of the founders of Svenska Kullagerfabriken (S.K.F.), one of the world's leading ball- and roller bearing makers. Sven Wingqvist invented the multi-row self-aligning radial ball bearing in 1907.

Chronology

*1876 Born December 10 in Hallsberg outside Örebro, Sweden. Son of the railway station inspector at Hallsberg S. D. Wingqvist and Anna Lundberg.
*1894 Graduated from Rudbecksskolan in Örebro (Örebro Technical Elementary School).
*1899 Employed as operating engineer at Gamlestadens Textile Industry in Göteborg where he worked many years to find a solution to the problems with frequent break downs in the ball bearings for the main drive shafts. This was caused by the ground conditions with lots of clay that the factory was built on and the shaft bearing supports moved some fractions of millimeters from time to time, hardly measurable, inducing enormous extra forces in the "stiff" bearings that was available at that time. Wingqvist spend more and more time on the development of bearings in general, collecting all sorts of technical achievements and new ideas that was presented continuously on the ball bearing concepts around Europe. In particular he carefully studied the report presented in 1902 by professor Richard Stribeck [Richard Stribeck (1861-1950), german scientist. The Stribeck curve is named after him] working at the Institute of Technology in Dresden, Germany, where he had compared ball bearings versus plain bearings from a scientific point of view. Wingqvist soon realized that the ball bearing techniques had a future and that there was room for innovations. On his initiative a small workshop was set up within the premises of Gamlestadens factory where they could carry out tests with different designs and steel materials. In 1906 he was granted a patent for a "single-row self-aligning ball bearing" (Swedish patent reg. No. 24160) but this type of bearing had the disadvantage that it could not stand very much axial loads. His work continued in order to find the solution for a self aligning bearing that also could carry some axial loads.
*1907 On the initiative of Sven Wingqvist and the owners of Gamlestadens Textile Industry, SKF was founded February 16, at first as a subsidiary company to Gamlestadens Textile Industry. He was appointed the managing director as well as technical manager. Axel Carlander, son of one of the owners of Gamlestadens Textile Industry, was appointed CEO for SKF. (NB: Axel Carlander held the position as CEO for SKF until 1937).
*1907 May 21, SKF sends in the patent application to PRV for a "multi-row self-aligning radial ball bearing". Patent is granted June 6 with patent reg. No. 25406. Inventor: S.G. Wingqvist. In the patent application a double-row as well as a triple-row ball bearing is described. Within the same period of time, patent applications is sent out by SKF to 10 different countries, among them France, Germany, England and the USA and patent is granted in all countries in a short time. The door was now open for the world wide expansion. After the new factory had been build in Göteborg, SKF sales companies as well as new manufacturing plants were built up in a lot of countries around the world.
*1919 he married Kristina Hult (born 1892).
*1919-1932 Wingqvist works as an independent consulting engineer and as part time CEO for SKF.
*1938-1953 CEO for SKF.
*1933-1938 Managing director for AB Bofors
*1938-1946 CEO for AB Bofors
*1941-1953 CEO for the company Svenska Flygmotor AB

Some of Sven Wingqvist's Swedish patents (Sweden reg. No.)

*25406 Multi-row self aligning radial ball bearing, 1907
*26266 Self aligning ball bearing for axial loads, 1908
*27397 Tool for precision measurements, 1908
*31707 2-row spherical roller bearing, 1910
*33901 Ball holder device, Wingqvist and H. Olsson, 1910
*57197 Roller bearing with pressure flange, Wingqvist and N.A. Palmgren, 1919
*78223 Device for 2-row roller bearings, 1931:*(list is not complete)

References

* SKF - "The History of a Swedish Export Industry, 1907-1957" by Birger Steckzén, 1957. Published by SKF.


Wikimedia Foundation. 2010.

Игры ⚽ Нужна курсовая?

Look at other dictionaries:

  • Sven Gustaf Wingqvist — Sven Wingqvist c.1926 Sven Gustaf Wingqvist (* 10. Dezember 1876 in Hallsberg; † 17. April 1953) war ein schwedischer Erfinder im Zeitalter der Industrialisierung. Er gründete die Firma SKF den heutigen Weltmarktführer für Wälzlager und erfand um …   Deutsch Wikipedia

  • Sven Wingqvist — at his drawing board at SKF around 1920. Sven Gustaf Wingqvist (* 10. Dezember 1876 in Hallsberg; † 17. April 1953) war ein schwedischer Erfinder im Zeitalter der Industrialisierung. Er gründete die Firma SKF den heutigen Weltmarktführer für… …   Deutsch Wikipedia

  • Wingqvist — Sven Wingqvist at his drawing board at SKF around 1920. Sven Gustaf Wingqvist (* 10. Dezember 1876 in Hallsberg; † 17. April 1953) war ein schwedischer Erfinder im Zeitalter der Industrialisierung. Er gründete die Firma SKF den heutigen… …   Deutsch Wikipedia

  • SKF Linearsysteme — AB SKF Unternehmensform Aktiengesellschaft Gründung 1907 Unternehmenssitz …   Deutsch Wikipedia

  • SKF Linearsysteme GmbH — AB SKF Unternehmensform Aktiengesellschaft Gründung 1907 Unternehmenssitz …   Deutsch Wikipedia

  • Swedish inventions — are novel ideas and machines that have been pioneered in Sweden. In the 18th century Sweden s scientific revolution took off. Previously, technical progress had mainly come from professionals who had immigrated from mainland Europe. In 1739, the… …   Wikipedia

  • Axialkugellagern — Kugellager mit stehendem Außenring Kegelrollenlager Wälzlager sind Lager, bei denen zwei zueinander bewegliche Komponenten, der sogenannte Innenring …   Deutsch Wikipedia

  • DIN 5412 — Kugellager mit stehendem Außenring Kegelrollenlager Wälzlager sind Lager, bei denen zwei zueinander bewegliche Komponenten, der sogenannte Innenring …   Deutsch Wikipedia

  • Flanschlager — Kugellager mit stehendem Außenring Kegelrollenlager Wälzlager sind Lager, bei denen zwei zueinander bewegliche Komponenten, der sogenannte Innenring …   Deutsch Wikipedia

  • Kegelrollenlager — Kugellager mit stehendem Außenring Kegelrollenlager Wälzlager sind Lager, bei denen zwei zueinander bewegliche Komponenten, der sogenannte Innenring …   Deutsch Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”