- Buoyancy compensator (diving)
Stab jacketredirects here. For a type of body armor, see stab vest."A buoyancy compensator (or buoyancy control device, BC or BCD) is a piece of diving equipmentworn by divers to provide:
* life saving emergency
buoyancyboth underwater and on the surface.
* the ability to adjust and control the overall buoyancy of the diver and the diver's heavy equipment allowing the diver to achieve neutral buoyancy, remaining at constant depth, or to descend or ascend in a controlled way.Some types of buoyancy compensator also built around the diver's
scuba setor are built into its harness.
BCs can have the following features:
* A low pressure "direct feed" that transports gas from diving cylinder and
diving regulatorto the BC.
* An "inflation valve" that allows gas from the "direct feed" into the bladders of the BC.
* A "vent valve" that allows gas to escape from the bladders of the BC. Most BCs have at least two vents: one at the extreme top and the other at the bottom of the BC. As air migrates to whichever part of the BC is uppermost, the vent situated at the shoulder is used when upright and the vent situated at the diver's waist is used when inverted.
* An "over pressurization valve" that automatically vents the bladders if the diver over inflates the BC by ascending or by injecting too much gas.
* A harness that the diver wears with straps around the
torsoand over the shoulders
* A plastic or metal backplate to support
* Pockets for carrying
diving reel, buoys and decompression tables
* An integrated
diving weighting system- pockets for lead weights with a quick release mechanism. Integrated weights can eliminate the need for a separate weight belt.
* D rings or other anchor points, for clipping on other equipment such as torches, strobes, reels, cameras and stage cylinders
* Emergency inflation cylinders. This can either be a 0.5 litre air cylinder, filled from the diver main cylinder, or a small
carbon dioxidecylinder. There is a risk that an emergency cylinder is accidentally opened during a dive causing a rapid ascent and barotraumato the diver. Carbon dioxide, being poisonous at high partial pressures, is a dangerous gas to have in a BC because the diver may inhale it from the bag underwater. [http://www.emedmag.com/html/pre/tox/0500.asp CO2 Toxicity]
There are three main types of BC:
Wings consist of a pair of inflatable bladders worn behind and on either side of the diver. Wings are not a recent development, but have recently become popular again because of
Stab jacket, stabiliser jacket, stab, waistcoat, or vest BCs are inflatable vests worn by the diver around the upper torso, and also act as the cylinder harness. The air bladder may extend from the back around the diver's sides ("wraparound") or may only cover the back ("back inflation.") Wraparound bladders are favored by some divers because they may make it easier to maintain balance, both submerged and on the surface. However, some designs have had the tendency to squeeze the diver's torso when inflated. Back inflation (Wing) BC's do not have this problem but have a greater tendency to float the diver face-down on the surface, which presents an obvious hazard in an emergency. Jacket-style BC's typically provide up to 25 litres of buoyancy (depending on size) and are fairly comfortable to wear. Jacket-style BC's are the most common type among recreational divers because they can integrate buoyancy control, weights, attachment points for auxiliary gear, and cylinder retention in a single piece of gear. The diver need only attach a cylinder and regulator set in order to have a complete SCUBA set. Some "tech-rec" jacket-style BC's have the ability to carry multiple cylinders.
Adjustable Buoyancy Life Jackets, ABLJs, or Horsecollar BCs are worn around the neck and chest with straps around the waist and usually between the legs. They are historically derived from Mae West lifejackets which were cheap and available. As they were developed in the 1960s [Historicizing Lifestyle: Mediating Taste, Consumption and Identity from the 1900s to 1970s (Hardcover), Raptures of the Deep: Leisure, Lifestyle and Lure of Sixties Diving by Bill Osgeby ISBN 978-0754644415] they have been largely superseded by wing and vest type BCs. Additionally, they are relatively less comfortable because they use a "crotch strap" between the legs, and generally provide less total buoyancy potential (up to 15 liters) than Jacket BC or Wings, even though this amount is still generally adequate for both warm water and cold water recreational diving. Finally, because the diver must use a separate cylinder harness as a platform for the aqualung, they are slightly more complicated to use. However, its location on the diver's chest means that it does the best job of all BCs in floating a distressed, fatigued and/or unconscious diver face-up on the surface in the event of a problem.
When underwater, a diver often needs to be neutrally buoyant so that the diver neither sinks nor rises but remains at constant depth, with minimal effort. A state of neutral buoyancy exists when the weight of water that the diver displaces equals the total weight of the diver. The diver uses the BC to maintain this neutral buoyancy by adjusting the BC's volume and therefore its buoyancy, in response to various effects, which alter the diver’s overall volume or weight, primarily:
* If the diver's exposure suit is made of a compressible material such as
Neoprene, the volume of the material will change as the pressure changes when the diver descends and ascends.
* Gas contained within the air spaces within the diver's body and equipment is compressed on descent and expands on ascent, resulting in volume changes similar to those caused by exposure suit compression, but of a greater magnitude. Gas contained inside a drysuit is also compressed as the diver descends; however, the diver normally counteracts this by adding gas to the drysuit, not the BC, in order to avoid "squeeze", a mild
barotraumato the skin.
* As the dive proceeds, gas is consumed from the
diving cylinders of the breathing equipment. For open circuit SCUBA, this represents a progressive loss of mass from the diver, which makes him or her more buoyant; the diver’s overall buoyancy must be reduced by venting air from the BC. For this reason the open circuit diver needs to configure his equipment to be a little overweight at the beginning of the dive so that neutral buoyancy can be achieved after the loss of the weight of the air. The magnitude of this phenomenon is 1.225 grams for every litre of air used, or about 4.3 kg for the air in a 15 litre cylinder (approx 5lbs in an AL80 tank).
In practice, the diver doesn't think about all this theory during the dive. To remain neutrally buoyant, gas is injected into the BC when the diver is too heavy, or is sinking, and vented from the BC when the diver is too buoyant, or is rising. A feature of diving is that there isn't any automatically stable equilibrium position for a diver wearing a BC, or even simply for a diver with lungs full of air. Any change in depth from a position of neutrality and even a small changes in volume, including the simple act of breathing, result in a force toward an even less neutral depth. Thus, maintenance of neutral buoyancy in scuba must be a continuous and active procedure; its is the diving equivalent of balance. Fortunately, the diver's mass provides a source of inertia, as does the liquid medium, so small perturbations (such as from breathing) can be compensated for with relative ease by an experienced diver.
A feature of scuba which is often non-intuitive to beginning students of diving, is that gas generally needs to be "added" to the BC when a diver descends in a controlled manner, and "valved-off" (removed or vented) from the BC when the diver ascends in a controlled manner. This gas maintains the volume of the gas bubble in the BC during depth changes; this bubble needs to remain at constant "volume" for the diver to remain even approximately neutrally buoyant. When gas is "not" added to the BC during a descent, the gas bubble in the BC decreases in volume due to the increasing pressure, resulting in faster and faster descent with depth, until the diver hits the bottom. The same runaway phenomenon, an example of
positive feedback, can happen during ascent, resulting in uncontrolled ascent, until a diver prematurely surfaces without a safety stop.
With experience, divers eventually learn to minimize this problem by minimizing the size of the "constant volume bubble" in their BC's. This requires learning the minimum weighting requirement needed for their system, at the beginning of the dive (see factors above). Somewhat complex automatic reflexes behaviors are also developed by experienced divers, involving breathing control and BC gas management during depth changes, which allow them to remain neutrally buoyant without having to think much about it. Experienced scuba divers may often be identified by the fact that they maintain neutrality without any fin use, as fish do.
Orientation in the water
The orientation of the submerged diver is influenced by the BC and by other buoyancy and weight components and contributed to by the diver's body, clothing and equipment. The diver typically wishes to be positioned face-down while under water, to be able to see and swim usefully, but face-up, to be able to breathe, when on the surface.
The orientation of a static and stable object in water, such as a diver, is determined by its centre of buoyancy and its centre of mass. At equilibrium, they will be lined up under gravity with the centre of buoyancy vertically with (preferably above) the centre of mass. The diver's overall buoyancy and centre of buoyancy can routinely be adjusted by altering the volume of the gas in the BC,
lungsand diving suit. The diver's mass on a typical dive does not generally change by what seems like much (see above-- a typical dive-resort "aluminum 80" tank at 200 bar contains about 2.8 kg (~6lbs) of air or nitrox, of which about 2.3 kg (~5lbs) is typically used in a dive), although a large change is possible if the weight belt is jettisoned or a heavy object is picked up; and any air spaces such as in the BC and in diving suits will expand and shrink with depth pressure.
Generally, the diver has minimal control of the position of the buoyancy in the BC, only its quantity, although the diver does control his equipment setup, which includes its configuration and weighting locations, which ultimately influences where his effective BC lift is relative to his
Center of Gravity. [ [http://www.huntzinger.com/dive/sb/BC_physics-centroid.jpgSwimming Position Centroid Calculation Methodology illustration] from huntzinger.com ] .
Traditionally, weight belts or weight systems are worn with the weights on or close to the waist and are arranged with a quick release mechanism to allow them to be quickly jettisoned to provide extra buoyancy in an emergency. Current systems integrate the weights into the BCD providing some comfort and safety advantages as long as the BCD does not have to be removed from the body of the diver, for example in an emergency situation.
By inflating the BC at the surface the conscious diver may be able to easily float face-up, depending on his equipment configuration choices. A fatigued or unconscious diver can be made to float face up on the surface by adjustment of their buoyancy and weights so the buoyancy raises the top and front of the diver's body and the weights act on the lower and back of the body. An inflated ABLJ always provides this orientation, but an inflated stab, and all styles of wing BC generally float the diver facedown because the centre of buoyancy is too far from the diver's front. This floating orientation is generally considered undesirable and can be minimized pre-dive by: relocation of weights (perhaps of quick release type) further to the rear (such as or close to the diver's cylinder); avoiding the use of Aluminum tanks and using higher density cylinders (typically steel), which similarly moves the centre of mass to be further behind the diver, and thus, behind the center of buoyancy. The BC type can also be selected with this factor in mind, selecting a style that moves the centre of buoyancy forward, as this accomplishes the same net effect. Any or all of these options can be utilized to trim the system out to its desired characteristics [ [http://www.huntzinger.com/dive/sb/BC_physics2a.jpgSurface Buoyancy Moment Arm illustration] from huntzinger.com ] and many factors can contribute, such as the number and position of
diving cylinders, the type of diving suit, the position and size of stage cylinders, the size and shape of the diver's body and the wearing of ankle weights, or additional dive equipment, which each influence a diver's orientation in the water (horizontal) and on the surface (vertical) to some degree.
The ABLJ was developed by
Maurice Fenzyin 1961. [Historicizing Lifestyle: Mediating Taste, Consumption and Identity from the 1900s to 1970s (Hardcover), Raptures of the Deep: Leisure, Lifestyle and Lure of Sixties Diving by Bill Osgeby ISBN 978-0754644415] Early versions were inflated by mouth underwater. Later versions had their own air inflation cylinder. Some had carbon dioxideinflation cylinders, a development which was abandoned when valves that allowed divers to breathe from the BC's inflation bag were introduced. Since 1969most modern BCs have used inflation gas from one of the diver's main gas cylinders, in addition to an oral inflation tube which is used at the surface in the event the diver has no high pressure gas left. In 1971, ScubaProdeveloped the Stabilizer Jacket, the first jacket-style BC, and in 1972Watergill developed the Atpac wing.
More recent innovations for jacket BCs include, weight pouches to adjust attitude underwater, putting the weights on the BC rather than on a weightbelt, integrated regulators, heavily reinforced 1050 denier
ballistic nylon. Innovations for backplate and winginclude redundant bladders, stainless steel backplates, lightweight soft nylonbackplates, and 85lb lift bladders.
[http://www.diverite.com Dive Rite] pioneered the first wing for diving twin cylinders in 1985. Competitors in tech diving include [http://www.omsdive.com/ Ocean Management Systems] . Other SCUBA manufacturers include [http://www.sherwoodscuba.com/ Sherwood] , [http://www.zeagle.com/ Zeagle] , [http://www.scubapro.com/ scubapro] and [http://cressisub.it/index_int.php?lang=us cressisub] .
Other buoyancy equipment
There are other types of equipment worn by divers that affect buoyancy:
diving weighting system
Wikimedia Foundation. 2010.
Look at other dictionaries:
Buoyancy compensator — may stand for:*Buoyancy compensator (diving) *Buoyancy compensator (aviation) … Wikipedia
buoyancy compensator — Scuba Diving. an inflatable vest used to control one s buoyancy underwater or to rest at the surface, usually having a connecting hose for inflation or deflation by mouth and a CO2 cartridge for rapid, emergency inflation. Also called BC,… … Universalium
buoyancy compensator — Scuba Diving. an inflatable vest used to control one s buoyancy underwater or to rest at the surface, usually having a connecting hose for inflation or deflation by mouth and a CO2 cartridge for rapid, emergency inflation. Also called BC,… … Useful english dictionary
Compensator — can refer to: Pressure control on a piston pump An alternative term for pipeline expansion joints A muzzle brake, used to counter the recoil of a firearm, or to prevent the muzzle from climbing due to kickback from the rapid firing of an… … Wikipedia
Buoyancy — The forces at work in buoyancy In physics, buoyancy ( / … Wikipedia
Diving regulator — and Octopus Other names Demand valve Uses Reduces pressurized breathing gas to ambient pressure and delivers it to the diver Inventor Manuel Théodore Guillaumet (1838), Benoît Rouquayrol (1860) … Wikipedia
Diving cylinder — Diving cylinders to be filled at a diving air compressor station … Wikipedia
Diving equipment — Surface supplied commercial diving equipment on display at a trade show Diving equipment is equipment used by underwater divers for the purpose of facilitating diving activities. This may be equipment primarily intended for this purpose, or… … Wikipedia
Diving watch — Omega Seamaster model 2220.80, with a water resistance of 300 m (1,000 ft). The second crown (at 10 o clock) is a helium release valve. A diving watch is a watch designed for underwater diving that features, as a minimum, a water… … Wikipedia
buoyancy control device — an expandable bladder in the form of an expandable vest used with scuba apparatus. It can be inflated with air from the scuba tank to increase buoyancy while diving and is used for resting, swimming or lending assistance to others under water. It … Dictionary of ichthyology