Companding

Companding
Original signal
After compressing, before expanding

In telecommunication, signal processing, and thermodynamics, companding (occasionally called compansion) is a method of mitigating the detrimental effects of a channel with limited dynamic range. The name is a portmanteau of compressing and expanding.

While the compression used in audio recording and the like depends on a variable-gain amplifier, and so is a locally linear process (linear for short regions, but not globally), companding is non-linear and takes place in the same way at all points in time. The dynamic range of a signal is compressed before transmission and is expanded to the original value at the receiver.

The electronic circuit that does this is called a compandor and works by compressing or expanding the dynamic range of an analog electronic signal such as sound. One variety is a triplet of amplifiers: a logarithmic amplifier, followed by a variable-gain linear amplifier and an exponential amplifier. Such a triplet has the property that its output voltage is proportional to the input voltage raised to an adjustable power. Compandors are used in concert audio systems and in some noise reduction schemes such as dbx and Dolby NR (all versions).

Companding can also refer to the use of compression, where gain is decreased when levels rise above a certain threshold, and its complement, expansion, where gain is increased when levels drop below a certain threshold.

The use of companding allows signals with a large dynamic range to be transmitted over facilities that have a smaller dynamic range capability. For example, it is employed in professional wireless microphones since the dynamic range of the microphone audio signal itself is larger than the dynamic range provided by radio transmission. Companding also reduces the noise and crosstalk levels at the receiver.

Companding is used in digital telephony systems , compressing before input to an analog-to-digital converter, and then expanding after a digital-to-analog converter. This is equivalent to using a non-linear ADC as in a T-carrier telephone system that implements A-law or μ-law companding. This method is also used in digital file formats for better signal-to-noise ratio (SNR) at lower bit rates. For example, a linearly encoded 16-bit PCM signal can be converted to an 8-bit WAV or AU file while maintaining a decent SNR by compressing before the transition to 8-bit and expanding after a conversion back to 16-bit. This is effectively a form of lossy audio data compression.

Many of the music equipment manufacturers (Roland, Yamaha, Korg) used companding for data compression in their digital synthesizers. This dates back to the late 1980s when memory chips would often come as one of the most costly parts in the instrument. Manufacturers usually express the amount of memory as it is in the compressed form. i.e. 24MB waveform ROM in Korg Trinity is actually 48MB of data. Still the fact remains that the unit has a 24MB physical ROM. In the example of Roland SR-JV expansion boards, they usually advertised them as 8MB boards which contain '16MB-equivalent content'. Careless copying of the info and omitting the part that stated "equivalent" can often lead to confusion.

Contents

History

The use of companding in an analog picture transmission system was patented by A. B. Clark of AT&T in 1928 (filed in 1925):[1]

In the transmission of pictures by electric currents, the method which consists in sending currents varied in a non-linear relation to the light values of the successive elements of the picture to be transmitted, and at the receiving end exposing corresponding elements of a sensitive surface to light varied in inverse non-linear relation to the received current.
—A. B. Clark patent

In 1942, Clark and his team completed the SIGSALY secure voice transmission system that included the first use of companding in a PCM (digital) system.[2]

In 1953, B. Smith showed that a nonlinear DAC could result in the inverse nonlinearity in a successive-approximation ADC configuration, simplifying the design of digital companding systems.[3]

In 1970, H. Kaneko developed the uniform description of segment (piecewise linear) companding laws that had by then been adopted in digital telephony.[4]

See also

References

  1. ^ US patent, A. B. Clark, "Electrical picture-transmitting system", issued 1928-11-13, assigned to AT&T 
  2. ^ Randall K. Nichols and Panos C. Lekkas (2002). Wireless Security: Models, Threats, and Solutions. McGraw-Hill Professional. ISBN 0071380388. http://books.google.com/books?id=XO5VjslHLasC&pg=PA256&lpg=PA256&dq=companding+a-b-clark+pcm. 
  3. ^ B. Smith, "Instantaneous Companding of Quantized Signals," Bell System Technical Journal, Vol. 36, May 1957, pp. 653–709.
  4. ^ H. Kaneko, "A Unified Formulation of Segment Companding Laws and Synthesis of Codecs and Digital Compandors," Bell System Technical Journal, Vol. 49, September 1970, pp. 1555–1558.

External links


Wikimedia Foundation. 2010.

Игры ⚽ Нужен реферат?

Look at other dictionaries:

  • companding — spūda plėtra statusas T sritis radioelektronika atitikmenys: angl. companding vok. Kompandierung, f rus. компандирование, n; сжатие расширение, n pranc. compression expansion, f …   Radioelektronikos terminų žodynas

  • companding — /keuhm pan ding/, n. a process in which the dynamic range of a signal is reduced for recording purposes and then expanded to its original value for reproduction or playback. [1965 70; COMPAND(ER) + ING1] * * * …   Universalium

  • companding — noun A process in which noise in a signal is reduced by selective compression and expansion …   Wiktionary

  • companding — /keuhm pan ding/, n. a process in which the dynamic range of a signal is reduced for recording purposes and then expanded to its original value for reproduction or playback. [1965 70; COMPAND(ER) + ING1] …   Useful english dictionary

  • μ-law algorithm — Companding of μ law and A law algorithms The µ law algorithm (often u law, ulaw, or mu law) is a companding algorithm, primarily used in the digital telecommunication systems of North America and Japan. Companding algorithms reduce the dynamic… …   Wikipedia

  • NICAM — This article is about a compression form for digital audio. For the media content rating institute, see Netherlands Institute for the Classification of Audiovisual Media. NICAM stands for Near Instantaneous Companded Audio Multiplex. It is an… …   Wikipedia

  • Μ-law algorithm — The µ law algorithm (pronounced myoo law) is a companding algorithm, primarily used in the digital telecommunication systems of North America and Japan. As with other companding algorithms, its purpose is to reduce the dynamic range of an audio… …   Wikipedia

  • ГОСТ 22670-77: Сеть связи цифровая интегральная. Термины и определения — Терминология ГОСТ 22670 77: Сеть связи цифровая интегральная. Термины и определения оригинал документа: 10. n ичный сигнал электросвязи n агу digital signal Цифровой сигнал электросвязи, имеющий п возможных состояний представляющего параметра,… …   Словарь-справочник терминов нормативно-технической документации

  • dbx (noise reduction) — The logo represents both the company and its noise reduction system dbx is a family of noise reduction systems developed by the company of the same name. The most common implementations are dbx Type I and dbx Type II for analog tape recording and …   Wikipedia

  • A-law algorithm — Graph of μ law A law algorithms An A law algorithm is a standard companding algorithm, used in European digital communications systems to optimize, i.e., modify, the dynamic range of an analog signal for digitizing. It is similar to the μ law… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”