- Surface Marker Buoy
= Surface Marker Buoy (standard) =
A Surface Marker Buoy, SMB or simply a blob is an inflatable
buoyused by SCUBA divers, with a line, to mark the diver's position to their surface, safety boat while the diver is underwater.SMBs are inflated on the surface before diving to mark the diver's position during a drift dive, night dive, mistor disturbed sea conditions such as Beaufort force2 or greater. The buoy lets the dive boat follow the divers and highlights their position to other boattraffic.
Divers need to consider some configuration options and features when using SMBs. A closed SMB, with a valve through which the user blows, is likely to be more reliable, by remaining inflated, than an open ended buoy or a delayed buoy which seals itself as it inflates.
To avoid losing the reel, a lanyard attaches the
diving reelto the diver. This lanyard can clip to the buoyancy compensator or go around the wrist. Alternatively, the lanyard can be long enough to float above the diver and stay out of the way. If the lanyard clips to the buoyancy compensator, the user should take care to release if there is surface boating activity, as boats may drag divers up by their SMB reels.
DIR divingphilosophy considers unsafe any attachment to equipment or objects which end above the water surface, due to high risk associated with dragging the diver upwards in spite of their decompression obligation or maximum ascent speed limit.
A delayed Surface Marker Buoy, decompression buoy or deco buoy is similar to a Surface Marker Buoy but is launched whilst the diver is submerged and generally only at towards the end of the dive. The buoy marks the diver's position underwater so the boat safety cover can locate the diver even though the diver may have drifted some distance from the dive site while doing
decompression stops. A reel and line connect the buoy on the surface to the diver beneath the surface. Alternative means of marking one's position while doing decompression stops are diving shots and decompression trapezes.
A decompression buoy is not used to lift heavy weights: in this case divers use a
There are at least four methods of keeping the air in the inflated deco buoy. The buoy can be:
* open ended (preferably with small independent weight to keep the opening submerged to prevent the air escaping)
* open ended self sealing buoys (the air in the buoy expands as the buoy ascends sealing a neck at the bottom of the buoy)
* sealed, with an inflation valve and a pressure relief valve
* sealed, with a built in air supply and a pressure relief valve
Divers of some training organisations carry two differently coloured deco buoys underwater so that they can signal to their surface support for help and still remain underwater decompressing. For example, in some circles in Europe, a red buoy indicates normal decompression and a yellow buoy indicates a problem, such as shortage of gas, that the surface support should investigate and resolve. Although in other two bouys (any colour) up one line means the same, currently the protocol is not universally accepted even within Europe.
Some types of buoy provide an attachment for a
strobe light, cyalume stickor writing slate, which can convey signals to the surface support.
Several common problems are encountered when deploying deco buoys :
diving reeljams after the buoy is inflated (dragging the diver up). To avoid this:
#* use a simpler system or a reel which cannot jam (e.g. a weighted spool of line)
#* detach the lanyard connecting the diver to the reel before inflating the buoy (and ensure no equipment is trapped in the buoy or reel)
#* attach two reels to each other in series. If one fails the other is unlocked to reel out its line.
# Part of the diver's equipment gets trapped in the deco buoy (dragging the diver up). To avoid this tie the lanyard of the reel to something solid on the sea bed before inflating the buoy (so you have time to sort the problem out)
# The diver removes the primary
demand valvefrom his or her mouth to inflate the buoy, and is therefore at a disadvantage in dealing with any other problems that might arise as the deco buoy goes off. There are a number of ways to avoid this:
#* Use a deco buoy with its own air supply
#* Use a secondary demand valve, such as an octopus, to inflate the buoy
#* Use a sealed buoy with an inflation valve, which is filled by blowing directly into the valve inlet or by attaching a medium-pressure inflation hose from the buoyancy compensator or dry suit. The valve does not retain the hose connector, like the BCD or suit inflator valve, and the hose can be easily pulled off the valve when the buoy is sufficiently filled.
#* Hold an open ended buoy above the primary demand valve and direct several exhalations up into the open end of the buoy. This technique is also useful in cold conditions to prevent freeflows caused by pressing purge buttons.
A safety sausage is a buoy used when the diver is at the surface to indicate the diver's position to the dive boat to reduce the risk of losing contact when air, light or sea conditions reduce the visibility of the divers from the boat. [ [http://www.vbs.vt.edu/scuba/Safety/SafeSaus.html "The Safety Sausage Story"] , vbs.vt.edu] The sausage is plastic tube that is normally inflated by putting one end under water and purging the second stage underneath to inflate it. Inflated tubes are normally about six feet (2m) tall. Uninflated sausages roll up and fit in a BC pocket. Commercial boat dive operations, especially at offshore reefs or areas known for strong currents or mercurial weather, may require divers to carry safety sausages. A safety sausage is not a substitute for a surface marker buoy or diver down flag.
* [http://www.bdsg.org/BDSG%20advice%20regarding%20DSMBs.pdf British Diving Safety Group advice on SMBs]
Wikimedia Foundation. 2010.
Look at other dictionaries:
Surface marker buoy — A surface marker buoy, SMB or simply a blob is an inflatable buoy used by scuba divers, with a line, to indicate the diver s position to their surface safety boat while the diver is underwater. Contents 1 Standard buoy 2 Decompression buoy 2.1… … Wikipedia
Marker buoy — may refer to: Surface Marker Buoy used by divers a light emitting or smoke emitting buoy used in naval warfare This disambiguation page lists articles associated with the same title. If an internal link led … Wikipedia
Marker — may refer to: Marker (linguistics), a morpheme that indicates some grammatical function Marker (telecommunications), a special purpose computer A set of sewing patterns tightly arranged within a rectangle that is placed over cloth to be cut… … Wikipedia
Buoy — A buoy is a floating device that can have many different purposes, which determine whether the buoy is anchored (stationary) or allowed to drift. The word, of Old French or Middle Dutch origin, is nowadays most commonly pronEng|ˈbɔɪ (identical… … Wikipedia
Decompression (diving) — Divers decompressing in the water at the end of a dive Decompression in the context of diving derives from the reduction in ambient pressure experienced by the diver during the ascent at the end of a dive or hyperbaric exposure and refers to both … Wikipedia
Diving equipment — Surface supplied commercial diving equipment on display at a trade show Diving equipment is equipment used by underwater divers for the purpose of facilitating diving activities. This may be equipment primarily intended for this purpose, or… … Wikipedia
Diver communications — are the methods used by divers to communicate with each other or with surface members of the dive team. There are several distinct forms of diver communications: Voice communications Most professional diving equipment such as full face diving… … Wikipedia
Underwater searches — are procedures carried out by divers in order to find a known or suspected target object or objects in a specified search area under water. There are a number of techniques in general use by Commercial, Scientific, Public service, Military, and… … Wikipedia
Glossary of SCUBA diving — Here is a glossary of scuba diving terms: Contents 1 A F 2 G L 3 M R 4 S Z A F Altitude Diving diving at a locat … Wikipedia
Distance line — 50 metres of line on a reel A distance line, penetration line or guideline is an item of diving equipment used by SCUBA divers as a means of returning to a safe starting point in conditions of low visibility, water currents or where pilotage is… … Wikipedia