Jerrycan

Jerrycans

A jerrycan is a robust fuel container originally made from pressed steel. It was designed in Germany in the 1930s for military use to hold 20 litres of fuel. The development of the Jerrycan was a huge improvement on earlier designs, which required tools and funnels to use.

Uses

Today similar designs are used for fuel and water containers, some of which are also produced in plastic. The designs usually emulate the original steel design and are still known as jerrycans, although they have also been called "jerryjugs" (or "jerry jugs", just as jerrycan is sometimes spelled as two words as well). Generally their use is denoted by the coloring, and occasionally, imprinted labeling on the container itself. This is to prevent the mixture of different fuels, as well as preventing water containers from being contaminated with fuel or vice versa.

Gasoline jerrycan.

The US version of the jerrycan is covered by military specification MIL-C-1283^[1] and has been produced since the early 1940s by a number of US manufacturers, according to a current manufacturer, Blitz.^[2] The National Stock Number is 7240-00-222-3088 but it is considered obsolete, having been replaced with plastic versions.

Typically, the following NATO color coding is used:^{[citation needed]}

Color	Use
Red	Gasoline (Lead-replacement)
Green	Gasoline (unleaded)
Yellow	Diesel
Blue	Kerosene
Tan, Light Blue or Black	Water (usually labeled)

Regulations

Current US regulations

As of January 10, 2009 all portable fuel containers are required to conform to two new regulations:^[3]

1. They must meet new federal Mobile Source Air Toxic regulations, based on the California Air Resources Board’s regulations.^[4]
2. They must meet the requirements of the Children’s Gasoline Burn Prevention Act.^[5]

These new regulations do not apply to OSHA-approved metal safety containers, but rather to the common red plastic, portable gas cans. The regulations apply only to newly manufactured gasoline cans, and there is no requirement on the part of users to discard their existing cans or to upgrade, although the EPA provides informational resources for implementing community Gas Can Exchange Programs.^[6]

Current European regulations

The transportation of dangerous goods (which includes liquid fuels) within Europe is governed by the European Agreement concerning the International Carriage of Dangerous Goods by Road (ADR).^[7] A jerrican is defined within Chapter 1.2 of the 2011 ADR as "a metal or plastics packaging of rectangular or polygonal cross-section with one or more orifices", a definition which includes the traditional jerrycan but which also covers a wide range of other packagings.

The ADR sets performance standards for packaging and specifies what standard of packaging is required for each type of dangerous good, including gasoline/petrol and diesel fuels. The traditional jerrycan is available in UN-marked approved versions which satisfy the requirements of the ADR.^[8]

History

French military jerrycan

The history of the Jerrycan is notable because it was reverse engineered during World War II. The name of the jerrycan reveals its German origins (Jerry being a disparaging wartime name for Germany and Germans).^[9]

German invention

The Germans called it the Wehrmachtskanister. The Germans had thousands of jerrycans stockpiled by 1939 in anticipation of war.^[10]

American lack of interest

In 1939, an American engineer named Paul Pleiss had built a vehicle to journey to India with his German colleague. After building the car, they realized they didn't have any storage for emergency water. The German engineer had access to the stockpile of jerrycans at Tempelhof Airport and managed to take three of them. They drove across 11 national borders without incident until Field Marshal Goering sent a plane to take the engineer home. The German engineer compounded his treason by giving Pleiss complete specifications for the manufacture of the can.^[10] Pleiss continued on to Calcutta, put his car in storage, and flew back to Philadelphia, where he told American military officials about the can. He could raise no interest.^[10] Without a sample, he realized he couldn't get anywhere. He eventually got the car shipped to New York by a roundabout method, and sent a can to Washington. The War Department decided instead to use World War I ten-gallon can with two screw closures, which required both a wrench and funnel for pouring.^[10]

The one American jerrycan was sent to Camp Holabird, Maryland, where it was redesigned. It only retained the handles, size and shape. The weld was replaced with rolled seams, the lining was removed and it now required a wrench and a funnel.^[10]

The original design proved far superior and these fuel containers were subsequently used in all theatres of war around the world.^[10]

British necessity

Jerrycan carried by one person

Jerrycan carried by two people

At the beginning of the Second World War, the British Army were equipped with simple rectangular fuel containers: a 2 gallon (9 litres) container made of pressed steel and a 4 gallon (18 litres) container made from tin plate. While the 9 litre - 2 gallon containers were relatively strong, they were expensive to produce. The 18 litre - 4 gallon containers, which were mainly manufactured in the third world, were cheap and plentiful but they were not very robust. Consequently they were colloquially known as flimsies.

While adequate for transportation by road in Europe, the flimsies proved to be extremely unsatisfactory during the North African Campaign and severely hampered the operation of the British 8th Army. The transportation of fuel over rough terrain often resulted in much of the fuel being lost as the containers were easily punctured. The resultant leakages also made the transportation vehicles liable to fuel fires.

When the British Army first saw the German fuel cans during the invasion of Norway in 1940, the British immediately saw the advantages of the superior design. The containers had three handles on them which allowed easy handling by one or two people or to be moved bucket brigade-style. The handle design also allows for two empty cans to be carried in each hand.

The sides of the can were marked with cross-like indentations that strengthened the can while allowing the contents to expand, as did an air pocket under the handles when the can was filled correctly. Rather than a screw cap, the containers used a cam lever release mechanism with a short spout secured with a snap closure and an air-pipe to the air pocket which enabled smooth pouring (which was omitted in some copies). The interior was also lined with an impervious plastic, first developed for steel beer barrels that would allow the can to be used for either water or gasoline. The can was welded, and had a gasket for a leak-proof mouth. The British used cans captured from the "Jerries" (Germans) — hence "jerrycans" — in preference to their own containers as much as possible. Later in 1940 Pleiss was in London, and British officers asked him about the design and manufacture of the jerrycan. Pleiss ordered the second of his three jerrycans flown to London.^[10]

Russian Usage

The strength of the Wehrmachtskanister had been realized in the Soviet Union. Its design has been copied and the Soviet Army accepted it as the standard container for liquids. This container is still being produced and used in modern Russia. In civilian use this container is used primarily for automotive fuel and lubricants.^[11]

See also

• Carboy another kind of large liquid transport container

References

• Desmond Young, historian.

1. ^ LOGSA. "CHAPTER 2. CAN, GASOLINE, MILITARY; STEEL; 5-GALLON". Tpub.com. http://www.tpub.com/content/fuelpumps/TM-10-7200-200-13/TM-10-7200-200-130013.htm. Retrieved 2010-08-03. 
2. ^ Wave Media Technologies Inc. "History". Blitz USA. http://www.blitzusa.com/history.htm. Retrieved 2010-08-03. 
3. ^ http://www.nospill.com/TurfMag/Article2009/Can_Your_Can_Do_This.pdf
4. ^ "Regulatory Announcement: Control of Hazardous Air Pollutants from Mobile Sources | Overview: Pollutants and Programs | US EPA". Epa.gov. http://www.epa.gov/OMS/regs/toxics/420f06021.htm#gascan. Retrieved 2010-08-03. 
5. ^ "Global Legal Information Network". Glin.gov. http://www.glin.gov/view.action?glinID=210328. Retrieved 2010-08-03. 
6. ^ "Gas Cans | Improving Air Quality in Your Community | US EPA". Epa.gov. 2006-06-28. http://www.epa.gov/air/community/details/gascan.html. Retrieved 2010-08-03. 
7. ^ http://live.unece.org/trans/danger/publi/adr/adr2011/11contentse.html
8. ^ http://www.jerrican.co.uk/
9. ^ definition and etymology of "jerrycan"
10. ^ ^{a b c d e f g} Richard M. Daniel (1987). "The Little Can That Could". Invention & Technology Magazine (AmericanHeritage.com) 3 (2). http://replay.web.archive.org/20070524182038/http://www.americanheritage.com/articles/magazine/it/1987/2/1987_2_62.shtml. 
11. ^ http://www.molot.biz/product/kan.php Steel containers for automotive fuel and lubricants (in Russian)

External links

• More info on Jerrycan history, usage & markings
• 20L plastic Jerry Cans currently used by U.S. and CDN Forces
• Description on Jerry Can Types
• Pro Quip International The Modern Metal Jerry Can as used by most defense forces throughout the world today
• (German) More about Jerrycan and "Wehrmachtskanister"
• Core77 Design Blog Nov 2010: Astonishingly good industrial design from the 1930s