Network interface device

Network interface device

In telecommunications, a Network Interface Device (NID) is a device that serves as the demarcation point between the carrier's local loop and the customer's premises wiring.

Generically, an NID may also be called a Network Interface Unit (NIU), Telephone Network Interface (TNI), or telephone network box. A smartjack is a type of NID with capabilities beyond simple electrical connection, such as diagnostics. An Optical Network Terminal (ONT) is a type of NID used with fiber-to-the-premises applications.

Contents

Wiring termination

Two simple NIDs, carrying six lines each, on the outside of a building
A german copper Phone Line Termination Box called APL = Abschlusspunkt LinienTechnik = TerminationPoint for LineTechnics

The simplest NIDs are essentially just a specialized set of wiring terminals. These will typically take the form of a small, weather-proof box, mounted on the outside of the building. The telephone line from the telephone company will enter the NID and be connected to one side. The customer connects their wiring to the other side. A single NID enclosure may contain termination for a single line or multiple lines.

In its role as the demarcation point, the NID separates the telephone company's equipment from the customer's wiring and equipment. The telephone company owns the NID itself, and all wiring up to it. Anything past the NID is the customer's responsibility. To facilitate this, there is typically a test jack inside the NID. Accessing the test jack disconnects the customer premises wiring from the network and allows the customer to plug a "known good" telephone into the jack to isolate trouble. If the telephone works at the test jack, the problem is the customer's wiring, and the customer is responsible for repair. If the telephone does not work, the line is faulty and the telephone company is responsible for repair.

Most NIDs also include "circuit protectors", which are surge protectors for a telephone line. They protect customer wiring, equipment, and personnel from any transient energy on the line, such as from a lightning strike to a telephone pole.

Simple NIDs contain no "intelligence" or "logic"; they are "dumb" devices. They have no capabilities beyond wiring termination, circuit protection, and providing a place to connect test equipment.

Smartjack

Three smartjacks for T-1 circuits, in two shelves; a 66 block is on the left

Several types of NIDs provide more than just a terminal for the connection of wiring. Such NIDs are colloquially called "smartjacks" as an indication of their built-in "intelligence", as opposed to a simple NID, which is just a wiring device. Smartjacks are typically used for more complicated types of telecommunications service, such as T1 lines. Plain old telephone service lines generally cannot be equipped with smartjacks.

Despite the name, most smartjacks are much more than a simple telephone jack. One common form for a smartjack is a circuit board with a face plate on one edge, mounted in an enclosure.

A smartjack may provide signal conversion, converting codes and protocols (e.g. framing types) to the type needed by the customer equipment. It may buffer and/or regenerate the signal, to compensate for signal degradation from line transmission, similar to what a repeater does.

Smartjacks also typically provide diagnostic capabilities. A very common capability provided by a smartjack is loopback, such that the signal from the telephone company is transmitted back to the telephone company. This allows the telephone company to test the line from the central office, without the need to have test equipment at the customer site. The telephone company usually has the ability to remotely activate loopback, without even needing personnel at the customer site. When looped back, the customer equipment is disconnected from the line.

Additional smartjack diagnostic capabilities include alarm indication signal, which reports trouble at one end of the line to the far end. This helps the telephone company know if trouble is present in the line, the smartjack, or customer equipment. Indicator lights to show configuration, status, and alarms are also common.

Smartjacks typically derive their operating power from the telephone line, rather than relying on premises electrical power, although this is not a universal rule.

Optical network terminals

An Optical Network Terminal mounted to the outside of a building, with the cover open

In fiber-to-the-premises systems, the signal is transmitted to the customer premises using fiber optic technologies. Unlike many conventional telephone technologies, this does not provide power for premises equipment, nor is it suitable for direct connection to customer equipment. An ONT (optical network terminal) is used to terminate the fiber optic line, demultiplex the signal into its component parts (voice telephone, television, and Internet), and provide power to customer telephones. As the ONT must derive its power from the customer premises electrical supply, many ONTs have the option for a battery backup, to maintain service in the event of a power outage.

Sources

See also

External links


Wikimedia Foundation. 2010.

Игры ⚽ Нужна курсовая?

Look at other dictionaries:

  • Network interface — may refer to: Network interface controller, the device a computer uses to connect to a computer network Network interface device, a demarcation point for a telephone network This disambiguation page lists articles associated with the same title.… …   Wikipedia

  • Network interface controller — Network Interface Card (NIC) A 1990s Ethernet network interface controller card which connects to the motherboard via the now obsolete ISA bus. This combination card features both a (now obsolete) bayonet cap BNC connector (left) for use in… …   Wikipedia

  • network interface card —    Abbreviated NIC. In networking, the PC expansion board that plugs into a personal computer or server and works with the network operating system and the appropriate device drivers to control the flow of information over the network.    The… …   Dictionary of networking

  • Wireless network interface card — A wireless network interface controller (WNIC) is a network card which connects to a radio based computer network, unlike a regular network interface controller (NIC) which connects to a wire based network such as token ring or ethernet. A WNIC,… …   Wikipedia

  • Network Access Protection — (NAP) is a Microsoft technology for controlling network access of a computer host based on the system health of the host, first introduced in Windows Server 2008. With Network Access Protection, system administrators of an organization s computer …   Wikipedia

  • Interface — may refer to:in computer science: * Interface (computer science), an abstraction of a software component. * Interface (Java), an abstract type which is used to specify an interface that classes must implement * Network interface, a point of… …   Wikipedia

  • Network switch — A network switch or switching hub is a computer networking device that connects network segments. The term commonly refers to a multi port network bridge that processes and routes data at the data link layer (layer 2) of the OSI model. Switches… …   Wikipedia

  • Network card — Infobox Computer Hardware Generic name = Network Card caption = A 1990s Ethernet network interface controller card which connects to the motherboard via the now obsolete ISA bus. This combination card features both a (now obsolete) bayonet cap… …   Wikipedia

  • Network Driver Interface Specification — The Network Driver Interface Specification (NDIS) is an application programming interface (API) for network interface cards (NICs). It was jointly developed by Microsoft and 3Com Corporation, and is mostly used in Microsoft Windows, but the open… …   Wikipedia

  • Network forensics — Forensic science Physiological sciences …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”