Railway switching networks

Railway switching networks

General Purpose

Railway centralization is designed for controlling all the switches and signals within a railway station or its area. Control of the system is exercised from a single point. Rail circuits work as sensors (monitoring the traffic on tracks) as well as signal transmitting media.

Needs and requirements of station trackage centralization

The speed of train processing at the stations plays a major role in railway permitting. Railway safety relies heavily on station operation. Switch and Signal Centralization is a kernel of stationary automation. Centralization provides logical interaction and blockage in accordance to safety standards, as well as economical and beneficial switch and signal control within a distance.

Today, railway centralization is implemented by means of Electromechanical circuits, sometimes with the help of electronics and microprocessors. The key element of any system is reliability. The system may fail 'safely' or 'unsafely'. Safe failure, is a failure which can result in a more prohibitive state of a centralization system (i.e. Red light instead of Green). Unsafe failure is when a systems fails giving more permissive state then should be (Green or Yellow instead of Red). Anything that may lead to unsafe failure, which can threaten thousands of lives, should be avoided (even though preventing from more advanced level). Failures must be safe, whenever they occur. Safe failure may cause delays, but no threat at all.

Anything that can lead to a failure of a system, (i.e. bad contact, operator's malpractice), should never cause an unsafe failure. That's why all the equipment ranging from relays and switches, should rather fail (not work) than to work wrongly.

Routing through station

* When station entrance trackage allows multiple routes from one point to another, basic route is a shortest path. It has the minimal number of crossing with other tracks, and allow the maximal speed.
* Any other route is called a variant route.

* Acceptance route provides train moving from the stretch to the station tracks.
*Transfer Routes is for train which move from one station track to a consecutive.
*Departure Routes allow trains to go from a station track to the consecutive stretch
*Shunting Routes move the rolling units which are not ready to work in trains

Technical Characteristics of Centralization

First there were mechanical systems, where the signal and switch transition were done mechanically, using the traction string laid under station from the control point to the switches and signals. Signal and switch control was done by hand, and blockage was done using special portable keys (key dependency) In mechanical systems, the human driven levers pulled wither rigid and flexible cords. Those cords were bound to switching mechanisms of switches and signals. Blocking dependencies were done by handles on the axles and rules with contacts, "placed in dependency boxes" which were the "brain" of the system.The control can be made within 200-500 meters with rigid strings, and within 800 meters with flexible strings.

Later on electrohydraulic and electropneumatic systems were developed. The distance of the control of these systems is 1000-1200 meters. The executive devices such as semaphores, switches were electrically driven, the signal were transmitted by wires, however the switching was done still in mechanical dependency boxes as "brains". Not only such executive devices as Switches and signals were electrical, but also the decisions became to be done done completely by electromagnetic relays. Simply speaking, the "system acquired fully electric brains" Such systems can control the switch network even with 5-6km distance. While, when this system uses code relays - the controllable distance is unlimited.

The even further generations of such systems are semiconductor and micro-processor-based. They are now being introduced in some places.

Electrical Centralization systems, projecting basics

There are a few kinds of system of electrical centralization. They are different in complexity level, constructional design. It is defined by number of switches, signals, traffic loads, etc. When a low train load, no shunting work on a station is expected - it is needed to cheapen an electric centralization system. More perfect systems must be in use on stations with heavy train loads, with shunting works, etc.

The first electric centralization system, which was developed in 1936 featured local dependency and local power. All the equipment, which realized the dependency among switches, routes, and signals was placed in relay booths located by station inway. While an operating (dispatcher's) console was in station building.

In a central dependency system, the tools which perform route setting, closing and opening (excluding the contradicting route exception & other dependencies) are located in the station building. As a rule, all the relay equipment is inside a special relay room. All the modern systems are projected and developed with central dependencies.

Electric Centralization system with central dependency, yet local power was the only one, used on intermediate stations till 1970ies. It featured battery self-power for station lights, switch leads, and rail circuits. The "execution devices" of switches, lights, and rail circuits are in relay compartments, while all the "brains" i.e. dependency devices are in station buildings.This systems has some faults among accumulators, and the devices of external installation. That's why this system is in use on low-active branches with poor electric supply.

Controlling the system: The electric centralization prefers to use "direct wire" "remote control". It features an individual signal line (i.e. wire) from the control point, which is dispatcher's desk - to a device."Telemechanical coding" is in use for distant districts of a station. It used coded centralization for route setting and, object condition acquisition. Station channels for this system require 4-wire linear circuit.

Remote control is divided on "individual control", and "route control". Individual control features, a separate button for every switch or signal light. While a route control features an automatic transition for all devices on the route - just by one key.

Closing the Rail Circuits methods, divide the electric centralization systems on "group contact closing", and "sectional contact closing". In group closing systems, all sections open after the entire route was used (train passed.) In sectional closing, separate sections open while they become out of use.

Physically, electric centralization systems can be broken on "static" and "block." In "block systems" components are interconnected by detachable electric plugs, while in static "systems", everything is connected by soldering (soft welding) of electric contacts. In block systems, separate dedicated circuit blocks are used for such operations as signal control, switch control, train sensors, etc.

Computerized and Semiconductor centralization

The major fault of the centralization system, dated back to 1960s was the usage of non-perspective base. The new perspective base appeared in 1970s when microprocessors started to be produced serially. A microprocessor is capable to do many things in data processing. It became universal and affordable. Let us take a look, how a microprocessor can be useful in solving Railway Centralization problems.

Since the train operations at the station are done simultaneously, the computer must work, emulating the parallel processes. The parallel process realization can be serial, conveyor, matrix, and multiprocessor.

In serial - the system has just one processor which process the processes in series. It is possible if the speed of the processing is much faster than that one of condition change of the station tracks. It creates the illusion of parallel calculations.

Functional processing features a couple of independent devices, which perform independent functions simultaneously.

Conveyor processing encounter that the process will be broken on a few steps, and then done either in parallel, or serially.

In matrix systems, there is a matrix of processors with a common control unit. The multiprocessor approach is done by a number of processors.

Brief History

The history of railway signaling and switching is dated back to 1841. That time the first railway semaphore appeared in England, and the science of railway centralization and blocking developed in parallel.

In 1856 the first mechanical centralization was offered in England. Later on Electromechanical, Electropneumatic, and Electrohydraulic systems came in use.

In Russia, the first mechanical centralization systems were built on a few stations on the Moscow - St. Petersburg line. In 1884 a mechanical centralization with rigid string staction acted at Sablino station.

The electric and electromechanical centralization systems which appeared in USA (Taylor's in 1891) and in Austria (Siemens in 1893) were most widely used. The first electromechanical centralization systems in Russia were built at Vitebsk station of Rigo-Orlovskaya Railway (1909) and on Saint Petersburg station of Moscow-Vindavo-Rybinsk railway (1914), what is now know as Moscow Station of St. Petersburg.

In 1934 completely electrical system was installed in Gudermes station.

The next step of centralization was a semiconductor and electronic base development. It was intensively researched in 1960-1970 period. Some experimental equipment were introduced in England, Germany, Japan, etc. The first station where the contactless centralization system were in use are Rezekne of Baltic Railway in 1968, and Obukhovo of October Railway in 1969 (now it is a part of St Petersburg)

The appearance of microprocessor base activated the development of new stationary systems. The first system of a computer-based centralization was built at Göteborg station in Sweden (1975) The system were manufactured by Telefon AB L M Ericsson in Mölndal, was based on a dual system with a realtime computer designed by Ericsson and had model number JZH-850. One computer was live and the other a hot standby. This computer was produced until the year 2000.1980ies and 1990ies period marks the development and implementation of microprocessor-based system in railway switching centralization.The following firms were the most active in this aspect: Ericsson (Sweden), SEL, SEG (Germany), Alcatel (Austria), JNR (Japan) Siemens (Germany), DSI (Denmark) In Russia the computer and microprocessor centralization developments are done by Saint Petersburg, and Kharkov, railway institutes. As well as Girdotransignalsvyaz' institute.

See also

*Centralized Traffic Control

Bibliography

Stationary systems of automation and telemechanic, by Vl.V.Sapozhnikov, B.N.Elkin, I.M.Kokurin (Moscow Transport, 2000)

Railways. The general course: by M.M. Uzdin, Yu.I. Efimenko, V.I. Kovalev, S.I. Loginov, B.F. Shaul'skiy. (St Petersburg 2002)


Wikimedia Foundation. 2010.

Игры ⚽ Поможем написать реферат

Look at other dictionaries:

  • Railway electrification system — Railway electrification supplies electrical energy to railway locomotives and multiple units so they can operate without having a reciprocating engine of their own.CharacteristicsThe main advantage of electric traction is a higher power to weight …   Wikipedia

  • Railway electric traction — Contents 1 History 2 Unit types 2.1 DC traction units 2.2 …   Wikipedia

  • Canadian National Railway — Canadian National system map …   Wikipedia

  • Commtel Networks — Pvt Ltd. Type Privately held company Industry Telecommunication, Surveillance Founded July, 1998 …   Wikipedia

  • Token (railway signalling) — A token being offered by a signalman on the Keighley and Worth Valley Railway …   Wikipedia

  • Railroad switch — For other uses, see Switch (disambiguation). A right hand railroad switch with point indicator pointing to right …   Wikipedia

  • Interlocking — In railway signaling, an interlocking is an arrangement of signal apparatus that prevents conflicting movements through an arrangement of tracks such as junctions or crossings. The signaling appliances and tracks are sometimes collectively… …   Wikipedia

  • GE Transportation Systems — GE Transportation, formerly known as GE Rail, is a division of General Electric GE Technology Infrastructure (which also includes GE Aircraft Engine). The organization manufactures equipment for the railroad industry as well as other industries… …   Wikipedia

  • Personal rapid transit — ation concept that offers on demand, non stop transportation, using small, independent vehicles on a network of specially built guideways. Several different designs have been proposed, and as of 2008, at least one is under… …   Wikipedia

  • Business and Industry Review — ▪ 1999 Introduction Overview        Annual Average Rates of Growth of Manufacturing Output, 1980 97, Table Pattern of Output, 1994 97, Table Index Numbers of Production, Employment, and Productivity in Manufacturing Industries, Table (For Annual… …   Universalium

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”