Foreland basin

Foreland basin

basins, where accommodation space is generated by lithospheric extension.


Types of Foreland Basin

Foreland basins can be divided into two categories:
* Peripheral (Pro) foreland basins, which occur on the plate that is subducted or underthrust during plate collision (i.e. the outer arc of the orogen)
** Examples include the North Alpine Foreland Basin of Europe, or the Ganges Basin of Asia
* Retroarc (Retro) foreland basins, which occur on the plate that overrides during plate convergence or collision (i.e. situated behind the magmatic arc that is linked with the subduction of oceanic lithosphere)
** Examples include the Andean basins, or Late Mesozoic to Cenozoic Rocky Mountain Basins of North America


The Foreland Basin System

DeCelles & Giles (1996) provide a thorough definition of the foreland basin system. Foreland basin systems comprise three characteristic properties:

(1) An elongate region of potential sediment accommodation that forms on continental crust between a contractional orogenic belt and the adjacent craton, mainly in response to geodynamic processes related to subduction and the resulting peripheral or retroarc fold-thrust belt;

(2) It consists of four discrete depozones, referred to as the wedge-top, foredeep, forebulge and back-bulge depozones (depositional zones) – which of these depozones a sediment particle occupies depends on its location at the time of deposition, rather than its ultimate geometric relationship with the thrust belt;

(3) The longitudinal dimension of the foreland basin system is roughly equal to the length of the fold-thrust belt, and does not include sediment that spills into remnant ocean basins or continental rifts (impactogens).

Foreland Basin Systems: Depozones

The wedge-top sits on top of the moving thrust sheets and contains all the sediments charging from the active tectonic thrust wedge.

The foredeep is the thickest sedimentary zone and thickens toward the orogen. Sediments are deposited via distal fluvial, lacustrine, deltaic, and marine depositional systems.

The forebulge and backbulge are the thinnest and most distal zones and are not always present. When present, they are defined by regional unconformities as well as aeolian and shallow-marine deposits.

Sedimentation is most rapid near the moving thrust sheet. Sediment transport within the foredeep is generally parallel to the strike of the thrust fault and basin axis.


Plate Motion and Seismicity

The motion of the adjacent plates of the foreland basin can be determined by studying the active deformation zone with which it is connected. Today GPS measurements provide the rate at which one plate is moving relative to another. It is also important to consider that present day kinematics are unlikely to be the same as when deformation began. Thus, it is crucial to consider non-GPS models to determine the long-term evolution of continental collisions and in how it helped develop the adjacent foreland basins.

Comparing both modern GPS (Sella et al. 2002) and non-GPS models allows deformation rates to be calculated. Comparing these numbers to the geologic regime helps constrain the number of probable models as well as which model is more geologically accurate within a specific region.

Seismicity determines where active zones of seismic activity occur as well as measure the total fault displacements and the timing of the onset of deformation (Allen et al. 2004).


How Basins Form

Foreland basins form because as the mountain belt grows, it exerts a significant mass on the Earth’s crust, which causes it to bend, or flex, downwards. This occurs so that the weight of the mountain belt can be compensated by isostasy at the upflex of the forebulge.

The plate tectonic evolution of a peripheral foreland basin involves three general stages. First, the passive margin stage with orogenic loading of previously stretched continental margin during the early stages of convergence. Second, the "early convergnece stage defined by deep water conditions", and lastly a "later convergent stage during which a subaerial wedge is flanked with terrestrial or shallow marine foreland basins" (Allen & Allen 2005).

The temperature underneath the orogen is much higher and weakens the lithosphere. Thus, the thrust belt is mobile and the foreland basin system becomes deformed over time. Syntectonic unconformities demonstrate simultaneous subsidence and tectonic activity.

Foreland basins are filled with sediments which erode from the adjacent mountain belt. In the early stages, the foreland basin is said to be underfilled. During this stage, deep water and commonly marine sediments, known as flysch, are deposited. Eventually, the basin becomes completely filled. At this point, the basin enters the overfilled stage and deposition of terrestrial clastic sediments occurs. These are known as molasse. Sediment fill within the foredeep acts as an additional load on the continental lithosphere.Fact|date=July 2008

Lithospheric Behavior

Although the degree to which the lithosphere relaxes over time is still controversial, most workers (Allen & Allen 2005, Flemings & Jordan 1989) accept an elastic or visco-elastic rheology to describe the lithospheric deformation of the foreland basin. Allen & Allen (2005) describe a moving load system, one in which the deflection moves as a wave through the foreland plate before the load system. The deflection shape is commonly described as an asymmetrical low close to the load along the foreland and a broader uplifted deflection along the forebulge. The transport rate or flux of erosion, as well as sedimentation, is a function of topographic relief.

For the loading model, the lithosphere is initially stiff, with the basin broad and shallow. Relaxation of the lithosphere allows subsidence near the thrust, narrowing of basin, forebulge toward thrust. During times of thrusting, the lithosphere is stiff and the forebulge broadens. The timing of the thrust deformation is opposite that of the relaxing of the lithosphere. The bending of the lithosphere under the orogenic load controls the drainage pattern of the foreland basin. The flexural tilting of the basin and the sediment supply from the orogen.

Lithospheric Strength Envelopes

Strength envelopes indicate that the rheological structure of the lithosphere underneath the foreland and the orogen are very different. The foreland basin typically shows a thermal and rheological structure similar to a rifted continental margin with three brittle layers above three ductile layers. The temperature underneath the orogen is much higher and thus greatly weakens the lithosphere. According to Zhou et al. (2003), “under compressional stress the lithosphere beneath the mountain range becomes ductile almost entirely, except a thin (about 6 km in the center) brittle layer near the surface and perhaps a thin brittle layer in the uppermost mantle.” This lithospheric weakening underneath the orogenic belt should not be overlooked when considering the regional lithospheric flexure behavior.


Thermal History

Foreland basins are considered to be hypothermal basins (cooler than normal), with low geothermal gradient and heat flow. Heat flow values average between 1 and 2 HFU (40-90 mWm-2 (Allen & Allen 2005). Rapid subsidence may be responsible for these low values.

Over time sedimentary layers become buried and lose porosity. This can be due to sediment compaction or the physical or chemical changes, such as pressure or cementation. Thermal maturation of sediments is a factor of temperature and time and occurs at shallower depths due to past heat redistribution of migrating brines.

Vitrinite reflectance, which typically demonstrates an exponential evolution of organic matter as a function of time, is the best organic indicator for thermal maturation. Studies have shown that present day thermal measurements of heat flow and geothermal gradients closely correspond to a regime’s tectonic origin and development as well as the lithospheric mechanics (Allen & Allen 2005).


Fluid Migration

Migrating fluids originate from the sediments of the foreland basin and migrate in response to deformation. As a result, brine can migrate over great distances. Evidence of long-range migration includes: 1) Correlation of petroleum to distant source rocks 2) Ore bodies deposited from metal-bearing brines, 3) Anomalous thermal histories for shallow sediments, 4) Regional potassium metasomatism, 5) Epigenetic dolomite cements in ore bodies and deep aquifers (Bethke & Marshak 1990).

Fluid Source

Fluids carrying heat, minerals, and petroleum, have a vast impact on the tectonic regime within the foreland basin. Before deformation, sediment layers are porous and full of fluids, such as water and hydrated minerals. Once these sediments are buried and compacted, the pores become smaller and some of the fluids, about 1/3, leave the pores. This fluid has to go somewhere. Within the foreland basin, these fluids potentially can heat and mineralize materials, as well as mix with the local hydrostatic head.

What is the major driving force for fluid migration?

Orogen topography is the major driving force of fluid migration. The heat from the lower crust moves via conduction and groundwater advection. Local hydrothermal areas occur when deep fluid flow moves very quickly. This can also explain very high temperatures at shallow depths.

Other minor constraints include tectonic compression, thrusting, and sediment compaction. These are considered minor because they are limited by the slow rates of tectonic deformation, lithology and depositional rates, on the order of 0-10 cm yr-1, but more likely closer to 1 or less than 1 cm yr-1. Overpressured zones might allow for faster migration, when 1 kilometer or more of shaly sediments accumulate per 1 million years (Bethke & Marshak 1990).

Bethke & Marshak (1990) state that “groundwater that recharges at high elevation migrates through the subsurface in response to its high potential energy toward areas where the water table is lower.”

Hydrocarbon Migration

Bethke & Marshak (1990) explain that petroleum migrates not only in response to the hydrodynamic forces that drive groundwater flow, but to the buoyancy and capillary effects of the petroleum moving through microscopic pores. Migration patterns flow away from the orogenic belt and into the cratonic interior. Frequently, natural gas is found closer to the orogen and oil is found further away (Oliver 1986).

Modern (Cenozoic) Foreland Basin Systems

Europe

* North Alpine Basin
** Peripheral foreland basin to the north of the Alps, in Austria, Switzerland, Germany and France
** Formed during the Cenozoic collision of Eurasia and Africa
** Complications arise in the formation of the Rhine Graben

* Po Basin
** Retro-foreland basin to the south of the Alps, in northern Italy

* Ebro Basin
** Peripheral foreland basin to the south of the Pyrenees, in northern Spain
** Substantial deformation of the foreland basin has occurred in the north, exemplified by the foreland fold-thrust belt in the western Catalan province. The basin is well known for the spectacular exposures of syn- and post-tectonic sediment strata due to the peculiar drainage evolution of the basin.

* Guadalquivir Basin
** Formed during the Neogene north of the Betic Cordillera (southern Spain), on a Hercynian basement.

* Aquitaine Basin
** Retro-foreland basin to the north of the Pyrenees, in southern France

Asia

* Ganges Basin
** Pro-foreland to the south of the Himalaya, in northern India and Pakistan
** Began to form 65 million years ago during the collision of India and Eurasia
** Filled with a sedimentary succession more than 12 km thick

* Northern Tarim Basin
** Pro-foreland to the south of the Tien Shan
** Formed initially during the Late Paleozoic, during the Carboniferous and Devonian
** Rejuvenated during the Cenozoic as a result of far field stress associated with the India-Eurasia collision and the renewed uplift of the Tien Shan
** Thickest sedimentary section is beneath Kashgar, where Cenozoic sediment is more than 10,000 metres thick

* Southern Junggar Basin
** Retro-foreland to the north of the Tien Shan
** Formed initially during the Late Paleozoic and rejuvenated during the Cenozoic
** Thickest sedimentary section is west of Urumqi, where Mesozoic sediment is more than 8,000 metres thick

Middle East

* Persian Gulf
** Foreland to the west of the Zagros mountains
** Underfilled stage
** Terrestrial part of the basin covers parts of Iraq and Kuwait

North America

* Alberta Basin
** Foreland to the east of the Rocky Mountains, Montana

outh America

* Chilean Intermediate Depression
** Foreland to the west of the Andes, Chile

Ancient Foreland Basin Systems

Europe

* Windermere supergroup
** Foreland basin caused by subduction of Iapetus ocean under Avalonia
** Ordovician to Silurian in age
** Underlies most of England

Asia

* Longmen Shan Basin
** Foreland to the east of the Longmen Shan mountains
** Peak evolution during the Triassic to Jurassic

* Urals Foreland
** Foreland to the west of the Ural mountains, in Russia
** Formed during the Paleozoic

North America

* Western Interior Basin
** Foreland to the east of the Sevier orogenic belt
** Covered much of Central and Eastern Utah
** Evolved during the Cretaceous
** Deepest parts of the basin filled with the Mancos Shale

* Appalachian Basin
** Foreland to the west of the Appalachian mountains, in Eastern USA

* Bend Arch - Fort Worth Basin
** Pro-Foreland to the east of the Ouachita orogenic belt
** Formed during the Paleozoic



ee also

*Backarc basin
*Forearc basin
*Passive margin


References

*Allen, Philip A. and Allen, John R. (2005) Basin Analysis: Principles and Applications, 2nd ed., Blackwell Publishing, 549 pp.
*Allen, M., Jackson, J., and Walker, R. (2004) Late Cenozoic reorganization of the Arabia-Eurasia collision and the comparison of short-term and long-term deformation rates. Tectonics, 23, TC2008, 16 pp.
*Bethke, Craig M. and Marshak, Stephen. (1990) Brine migrations across North America-the plate tectonics of groundwater. Annu. Rev. Earth Planet. Sci., 18, p. 287-315.
*Catuneanu, Octavian. (2004) Retroarc foreland systems - evolution through time. J. African Earth Sci., 38, p. 225-242.
*DeCelles, P.G. & Giles, K.A. (1996) Foreland basin systems. Basin Research, 8, p. 105-123.
*Flemings, Peter B. and Jordan, Teresa E. (1989) A synthetic stratigraphic model of foreland basin development. J. Geophys. Res., 94, B4, p. 3853-3866.
*Oliver, Jack. (1986) Fluids expelled tectonically from orogenic belts: their role in hydrocarbon migration and other geologic phenomena. Geology, 14, p. 99-102.
*Sella, Giovanni F., Dixon, Timothy H., Mao, Ailin. (2002) REVEL: a model for current plate velocities from space geodesy. J. Geophys. Res., 107, B4, 2081, 30 pp.
*Zhou, Di, Yu, Ho-Shing, Xu, He-Hua, Shi, Xiao-Bin, Chou, Ying-Wei. (2003) Modeling of thermo-rheological structure of lithosphere under the foreland basin and mountain belt of Taiwan. Tectonophysics, 374, p. 115-134.


Wikimedia Foundation. 2010.

Игры ⚽ Поможем сделать НИР

Look at other dictionaries:

  • Molasse basin — Geology of the Alps Tectonic subdivision Helvetic Zone Penninic nappes …   Wikipedia

  • Sedimentary basin — The term sedimentary basin is used to refer to any geographical feature exhibiting subsidence and consequent infilling by sedimentation. As the sediments are buried, they are subjected to increasing pressure and begin the process of lithification …   Wikipedia

  • Bend Arch-Fort Worth Basin — Infobox Oil field name = Bend Arch Fort Worth Basin Province region = North Central Texas country = United States coordinates = locblock = offonshore = Onshore operators = Devon Energy, Chesapeake Energy, EOG Resources, XTO Energy, EnCana, Range …   Wikipedia

  • Paradox Basin — is an asymmetric foreland basin located in southeast Utah and southwest Colorado. The basin is a large elongate northwest to southeast oriented depression formed during the late Paleozoic Era. The basin is bordered on the east by the Uncompaghre… …   Wikipedia

  • Ore Mountain Foreland — The Ore Mountain Foreland (German: Erzgebirgsvorland) is a strip of countryside of about 200 m to 500 m above sea level high, in the German state of Saxony, that lies immediately north of the German Ore Mountains and runs mainly… …   Wikipedia

  • Chad Basin — The Chad Basin, also known as the Lake Chad Basin, is a large lowland area in north central Africa. In all directions from the center of this area the elevation changes are gentle. The Chad Basin is an endorheic (closed) basin its water does not… …   Wikipedia

  • Ogaden Basin — The Ogaden Basin is an area of Ogadkenya that may hold significant reserves of crude oil and natural gas.[1] The basin covers an area of some 350,000 square kilometres (135,000 square miles) and is formed from sedimentary rocks up to 10,000… …   Wikipedia

  • Muglad Basin — Central African rifts: Muglad to the west The Muglad Basin is a large rift basin in Northern Africa. The basin is situated within southern Sudan and covers an area of approximately 120,000 km2. It contains a number of hydrocarbon accumulations of …   Wikipedia

  • Melut Basin — Central African rifts: Melut Basin near center. The Melut Basin is a rift basin in South Sudan. It is situated in the states of Upper Nile and Jonglei, south of the capital Khartoum and east of the river Nile. The Basin contains several… …   Wikipedia

  • Delaware Basin — Exposed and buried parts of Capitan Reef. Blue area shows area once flooded by the Delaware Sea. The Delaware Basin in West Texas and southern New Mexico is famous for holding large oil fields and for exposing a fossilized reef. Guadalupe… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”