Structural dynamics


Structural dynamics

Structural dynamics is a subset of structural analysis which covers the behaviour of structures subjected to dynamic loading. Dynamic loads include people, wind, waves, traffic, earthquakes, and blasts. Any structure can be subject to dynamic loading. Dynamic analysis can be used to find dynamic displacements, time history, and modal analysis.

A static load is one which does not vary. A dynamic load is one which changes with time. If it changes slowly, the structure's response may be determined with static analysis, but if it varies quickly (relative to the structure's ability to respond), the response must be determined with a dynamic analysis.

Dynamic analysis for simple structures can be carried out manually, but for complex structures finite element analysis can be used to calculate the mode shapes and frequencies.

Displacements

A dynamic load can have a significantly larger effect than a static load of the same magnitude due to the structure's inability to respond quickly to the loading (by deflecting). The increase in the effect of a dynamic load is given by the dynamic amplification factor (DAF):

: DAF = fracu_{max}u_{static}

where u is the deflection of the structure due to the load.

Graphs of dynamic amplification factors vs non-dimensional rise time (tr/T) exist for standard loading functions (for an explanation of rise time, see time history analysis below). Hence the DAF for a given loading can be read from the graph, the static deflection can be easily calculated for simple structures and the dynamic deflection found.

Time history analysis

A full time history will give the response of a structure over time during and after the application of a load. To find the full time history of a structure's response you must solve the structure's equation of motion.

Example

A simple single degree of freedom system (a mass, M, on a spring of stiffness, k for example) has the following equation of motion:

:M{ddot{x + kx = F(t):where ddot{x} is the acceleration (the double derivative of the displacement) and x is the displacement.

If the loading F(t) is a Heaviside step function (the sudden application of a constant load), the solution to the equation of motion is:

:x = fracF_0k(1 - cos{(wt)}):

where ω = sqrt{frackM} and the fundamental natural frequency, f = fracw2pi.

The static deflection of a single degree of freedom system is:

:x_{static} = fracF_0k:so you can write, by combining the above formulae:

:x = x_{static}(1 - cos(wt))

This gives the (theoretical) time history of the structure due to a load F(t), where the false assumption is made that there is no damping.

Although this is too simplistic to apply to a real structure, the Heaviside Step Function is a reasonable model for the application of many real loads, such as the sudden addition of a piece of furniture, or the removal of a prop to a newly cast concrete floor. However, in reality loads are never applied instantaneously - they build up over a period of time (this may be very short indeed). This time is called the rise time.

As the number of degrees of freedom of a structure increases it very quickly becomes too difficult to calculate the time history manually - real structures are analysed using non-linear finite element analysis software.

Damping

Any real structure will dissipate energy (mainly through friction). This can be modelled by modifying the DAF:

:DAF = 1 + e^{-cpi}:where c=frac ext {Damping Coefficient} ext{Critical Damping Coefficient} and is typically 2%-10% depending on the type of construction:

* Bolted steel ~6%
* Reinforced concrete ~ 4%
* Welded steel ~ 2%

Generally damping would be ignored for transient events (for example, an impulse load such as a bomb blast), but would be important for non-transient events (such as wind loading or crowd loading).

Modal analysis

A modal analysis calculates the frequency modes or natural frequencies of a given system, but not necessarily its full time history response to a given input. The natural frequency of a system is dependent only on the stiffness of the structure and the mass which participates with the structure (including self-weight). It is not dependent on the load function.

It is useful to know the modal frequencies of a structure as it allows you to ensure that the frequency of any applied periodic loading will not coincide with a modal frequency and hence cause resonance, which leads to large oscillations.

The method is:

a) Find the natural modes (the shape adopted by a structure) and natural frequencies

b) Calculate the response of each mode

c) Optionally superpose the response of each mode to find the full modal response to a given loading

Energy method

It is possible to calculate the frequency of different mode shapes of system manually by the energy method. For a given mode shape of a multiple degree of freedom system you can find an "equivalent" mass, stiffness and applied force for a single degree of freedom system. For simple structures the basic mode shapes can be found by inspection, but it is not a conservative method. Rayleigh's principle states:

"The frequency ω of an arbitrary mode of vibration, calculated by the energy method, is always greater than - or equal to - the fundamental frequency ωn."

For an assumed mode shape ar{u}(x), of a structural system with mass, M; stiffness, EI (Young's modulus, E, multiplied by the second moment of area, I); and applied force, F(x):

: ext{Equivalent mass, } M_{eq} = int{Mar{u}^2} du :: ext{Equivalent stiffness, }k_{eq} = int{EI(fracd^2ar{u}dx^2)}dx:: ext{Equivalent force, }F_{eq} = int{Far{udx:then, as above:

:w=sqrt{frack_{eq}M_{eq

Modal response

The complete modal response to a given load F(x,t) is v(x,t)=sum{u_n(x,t)}. The summation can be carried out by one of three common methods:

* Superpose complete time histories of each mode (time consuming, but exact)
* Superpose the maximum amplitudes of each mode (quick but conservative)
* Superpose the square root of the sum of squares (good estimate for well-separated frequencies, but unsafe for closely spaced frequencies)

To superpose the individual modal responses manually, having calculated them by the energy method:

:T = 2pi w

Assuming that the rise time tr is known it is possible to read the DAF from a standard graph. The static displacement can be calculated with u_{static}=frac{F_{1,eq{k_{1,eq. The dynamic displacement for the chosen mode and applied force can then be found from:

:u_{max} = u_{static}DAF

Modal participation factor

For real systems there is often mass participating in the forcing function (such as the mass of ground in an earthquake) and mass participating in inertia effects (the mass of the structure itself, Meq). The modal participation factor Γ is a comparison of these two masses. For a single degree of freedom system Γ = 1.

= frac{sum{M_nar{u}_n{sum{M_nar{u}_n^2

ee also

*Seismic analysis
*Response spectrum
*Earthquake engineering
*Seismic performance analysis
*Vibration
*Vehicle dynamics
*Modal analysis using FEM
*Vibration control

External links

* [http://structdynviblab.mcgill.ca/index.html Structural Dynamics and Vibration Laboratory of McGill University]


Wikimedia Foundation. 2010.

Look at other dictionaries:

  • Structural Dynamics Research Corporation — Die Structural Dynamics Research Corporation (SDRC) war ein amerikanischer Hersteller von MCAE (Mechanical CAD) und PLM (Product Lifecycle Management) Software. Er gehört jetzt zu Siemens PLM ehemals UGS Corporation. SDRC wurde im Jahre 1967… …   Deutsch Wikipedia

  • Transmissibility (structural dynamics) — Transmissibility, in the context of Structural Dynamics, can be defined as the ratio of the maximum force (f {max}) on the floor as a result of the vibration of a machine to the maximum machine force (P 0)::TR = frac{f {max{P 0} = R… …   Wikipedia

  • Structural engineer — Structural engineers analyze, design, plan, and research structural components and structural systems. Their work takes account mainly of technical, economic and environmental concerns, but they may also consider aesthetic and social… …   Wikipedia

  • Structural health monitoring — The process of implementing a damage detection strategy for aerospace, civil and mechanical engineering infrastructure is referred to as Structural Health Monitoring (SHM). Here damage is defined as changes to the material and/or geometric… …   Wikipedia

  • Structural mechanics — Space frame used in a building structure Pipe frame used in a competi …   Wikipedia

  • Structural load — Structural loads or actions are forces, deformations or accelerations applied to a structure or its components.[1][2] Loads cause stresses, deformations and displacements in structures. Assessment of their effects is carried out by the methods of …   Wikipedia

  • Structural alignment — is a form of sequence alignment based on comparison of shape. These alignments attempt to establish equivalences between two or more polymer structures based on their shape and three dimensional conformation. This process is usually applied to… …   Wikipedia

  • Structural analysis — comprises the set of physical laws and mathematics required to study and predict the behavior of structures. The subjects of structural analysis are engineering artifacts whose integrity is judged largely based upon their ability to withstand… …   Wikipedia

  • Structural stability — In mathematics, structural stability is an aspect of stability theory concerning whether a given function is sensitive to a small perturbation. The general idea is that a function or flow is structurally stable if any other function or flow close …   Wikipedia

  • List of structural engineering topics — This page aims to list all articles related to the specific discipline of structural engineering. For a broad overview of engineering, please see List of engineering topics. For biographies please see List of engineers.compactTOC NOTOC AA frame… …   Wikipedia


Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”

We are using cookies for the best presentation of our site. Continuing to use this site, you agree with this.