Color motion picture film

Color motion picture film

Color motion picture film refers both to unexposed color photographic film in a format suitable for use in a motion picture camera, and to finished motion picture film, ready for use in a projector, which bears images in color.

Contents

Overview

The first motion pictures were photographed on a simple silver halide photographic emulsion that produced a "black-and-white" image—that is, an image in shades of gray, ranging from black to white, which corresponded to the luminous intensity of each point on the photographed subject. Light, shade, form and movement were captured, but not color.

With color motion picture film, not only is the luminance of a subject recorded, but the color of the subject, too. This is accomplished by analyzing the spectrum of colors into several regions (normally three, commonly referred to by their dominant colors, red, green and blue) and recording these regions individually. Current color films do this by means of three layers of differently color-sensitive photographic emulsion coated onto a single strip of film base.

Early color motion picture processes recorded them as completely separate images (e.g., three-strip Technicolor) or adjacent microscopic image fragments (e.g., Dufaycolor). Each photographed color component, initially just a black-and-white record of the luminous intensities in the part of the spectrum it recorded, is processed to produce a transparent dye image in the complementary color. The superimposed dye images combine to synthesize the original colors by the subtractive color method. In some early color processes (e.g., Kinemacolor), the component images remained in black-and-white form and were projected through color filters to synthesize the original colors by the additive color method.

Tinting and hand coloring

See also List of early color feature films

The earliest motion picture stocks were orthochromatic and recorded blue and green light, but not red light. Recording all three spectral regions required making film stock panchromatic to some degree. Since orthochromatic film stock hindered color photography in its beginnings, the first films with color in them utilized aniline dyes in order to create artificial color. Hand-colored films began in 1895 with Thomas Edison's hand-painted Annabelle's Dance made for his Kinetoscope viewers.

Many early filmmakers from the first ten years of film also used this method to some degree. George Méliès offered hand-painted prints of his own films at an additional cost over the black-and-white versions, including the visual-effects pioneering A Trip to the Moon (1902). The film had various parts of the film painted frame-by-frame by twenty-one women in Montreuil[1] in a production-line method.[2]

The first commercially successful stencil color process was introduced in 1905 by Pathé Frères. Pathé Color, renamed Pathéchrome in 1929, became one of the most accurate and reliable stencil coloring systems. It incorporated an original print of a film with sections cut by pantograph in the appropriate areas for up to six colors[1] by a coloring machine with dye-soaked, velvet rollers.[3] After a stencil had been made for the whole film, it was placed into contact with the print to be colored and run at high speed (60 feet per minute) through the coloring (staining) machine. The process was repeated for each set of stencils corresponding to a different color. By 1910, Pathé had over 400 women employed as stencilers in their Vincennes factory. Pathéchrome continued production through the 1930s.[1]

A more common technique emerged in the early 1910s known as film tinting, a process in which either the emulsion or the film base is dyed, giving the image a uniform monochromatic color. This process was popular during the silent era, with specific colors employed for certain narrative effects (red for scenes with fire or firelight, blue for night, etc.).[2]

A complementary process, called toning, replaces the silver particles in the film with metallic salts or mordanted dyes. This creates a color effect in which the dark parts of the image are replaced with a color (e.g., blue and white rather than black and white). Tinting and toning were sometimes applied together.[2]

In the United States, St. Louis engraver Max Handschiegl and cinematographer Alvin Wyckoff created the Handschiegl Color Process, a dye-transfer equivalent of the stencil process, first used in Joan the Woman (1917) directed by Cecil B. DeMille, and used in special effects sequences for films such as The Phantom of the Opera (1925).[1]

Eastman Kodak introduced its own system of pre-tinted black-and-white film stocks called Sonochrome in 1929. The Sonochrome line featured films tinted in seventeen different colors including Peachblow, Inferno, Candle Flame, Sunshine, Purple Haze, Firelight, Azure, Nocturne, Verdante, Aquagreen,[4] Caprice, Fleur de Lis, Rose Doree, and the neutral-density Argent, which kept the screen from becoming excessively bright when switching to a black-and-white scene.[1]

Tinting and toning continued to be used well into the sound era. In the '30s and '40s, some western films were processed in a sepia-toning solution to evoke the feeling of old photographs of the day. Tinting was used as late as 1951 for Sam Newfield's sci-fi film Lost Continent for the green lost-world sequences. Alfred Hitchcock used a form of hand-coloring for the orange-red gun-blast at the audience in Spellbound (1945).[1] Kodak's Sonochrome and similar pre-tinted stocks were still in production until the 1970s and were used commonly for custom theatrical trailers and snipes.

Physics of light and color

The principles on which color photography is based were first proposed by Scottish physicist James Clerk Maxwell in 1855 and presented at the Royal Society in London in 1861.[1] By that time, it was known that light comprises a spectrum of different wavelengths that are perceived as different colors as they are absorbed and reflected by natural objects. Maxwell discovered that all natural colors in this spectrum may be reproduced with additive combinations of three primary colors - red, green, and blue - which, when equally mixed together, produce white light.[1]

Between 1900 and 1935, dozens of natural color systems were introduced, although only a few were successful.[4]

Additive color

The first color systems that appeared in motion pictures were additive color systems. Additive color was practical because no special color stock was necessary. Black-and-white film could be processed and used in both filming and projection. The various additive systems entailed the use of color filters on both the movie camera and projector. Additive color adds lights of the primary colors in various proportions to the projected image. Because of the limited amount of space to record images on film, and later because the lack of a camera that could record more than two strips of film at once, most early motion-picture color systems consisted of two colors, often red and green or red and blue.[2]

Practical color in the motion picture business began with Kinemacolor, first introduced in 1906.[3] This was a two-color system created in England by Edward R. Turner and George Albert Smith, and promoted by film pioneer Charles Urban's The Charles Urban Trading Company in 1908. It was used for a series of films including the documentary With Our King and Queen Through India, depicting the Delhi Durbar (also known as The Durbar at Delhi, 1912) which was filmed in December 1911. The Kinemacolor process consisted of alternating frames of specially sensitized black-and-white film which were photographed at 32 frames per second through a rotating filter with alternating red and green areas. The film was then printed and projected through the same alternating red and green filter at the same speed. The sense of color was achieved through a combination of separate red and green alternating images and the viewer's persistence of vision.[2][5]

William Friese-Greene invented another additive color system called Biocolour, which was developed by his son Claude Friese-Greene after William's death in 1921. William sued George Albert Smith, alleging that the Kinemacolor process infringed on the patents for his Bioschemes, Ltd.; as a result, Smith's patent was revoked in 1914.[1] Both Kinemacolor and Biocolour had problems with "fringing" or "haloing" of the image, due to the separate red and green images not fully matching up.[1]

French inventor Louis Dufay developed Dufaycolor in 1931, which was a reversal film (producing a positive image on the camera original) that used a mosaic of tiny filter elements of the primary colors between the emulsion and base of the film.[3].

By the nature of the systems, additive color was wasteful of light. Because of the filters used to project the films, more light was required than was typically projected onto the screen, resulting in an image that was dimmer than the average black-and-white image. The larger the screen, the dimmer the picture. For this, and other case-by-case reasons, additive processes for motion pictures grew out of favor about the time of the Second World War, though additive color methods are employed by all the color video and computer display systems in common use today.[2]

Subtractive color

The first successful Subtractive color system began with Kodak's Kodachrome system. Using duplitized film, red and green records were exposed. By bleaching away the silver and replacing it with color dye, a color image was obtained. Kodak's first narrative film with the process was a short subject entitled Concerning $1000 in 1916.

Kodachrome, however, did not find much use in the commercial market, and the first truly successful subtractive color process was William van Doren Kelley's Prizma,[6] an early color process that was first introduced at the American Museum of Natural History in New York City on 8 February 1917.[7][8] Prizma began in 1916 as an additive system similar to Kinemacolor. However, after 1917, Kelley reinvented the process as a subtractive one with several years of short films and travelogues, such as Everywhere With Prizma (1919) and A Prizma Color Visit to Catalina (1919) before releasing features such as the documentary Bali the Unknown (1921), The Glorious Adventure (1922), and Venus of the South Seas (1924).

The invention of Prizma led to a series of similarly printed color processes. This bipack color system used two strips of film running through the camera, one recording red, and one recording blue-green light. With the black-and-white negatives being printed onto duplitized film, the color images were then toned red and blue, effectively creating a subtractive color print.

Leon Forrest Douglass (1869–1940), a founder of Victor Records, developed a system he called Naturalcolor, and first showed a short test film made in the process on 15 May 1917 at his home in San Rafael, California. The only feature film known to have been made in this process, Cupid Angling (1918) — starring Ruth Roland and with cameo appearances by Mary Pickford and Douglas Fairbanks — was filmed in the Lake Lagunitas area of Marin County, California.[9]

After experimenting with more advanced methods of additive systems (including a camera with two apertures (one with a red filter one with green) from 1915 to 1921, Dr. Herbert Kalmus, Dr. Daniel Comstock, and mechanic W. Burton Wescott (who left the company in 1921) developed the subtractive color system for Technicolor. This system used a beam splitter in a specially modified camera to send red and green light waves to separate black-and-white film negatives. From these negatives, two prints were made on film stock with half the normal base thickness, which were toned accordingly: one red, the other green.[3] Then they were cemented together, base-to-base, into a single strip of film. The first film using this process was Toll of the Sea (1922) starring Anna May Wong. Perhaps the most ambitious film made with this process was The Black Pirate (1926), starring and produced by Douglas Fairbanks and directed by Albert Parker. The system was refined through the incorporation of dye imbibition, which allowed for the transferring of dyes from both color matrices into a single print, thus avoiding the problems at attaching two prints back-to-back and allowing for multiple prints to be created from a single pair of matrices.[2]

Technicolor's system was extremely popular for a number of years, but it was a very expensive process: shooting cost three times that of black-and-white photography and printing costs were no cheaper. By 1932, general color photography had nearly been abandoned by major studios, until Technicolor developed a new advancement to record all three primary colors. Utilizing a special dichroic beam splitter equipped with two 45-degree prisms in the form of a cube, light from the lens was deflected by the prisms and split into two paths to expose each one of three black-and-white negatives (one each to record the densities for red, green, and blue).[10]

The three negatives were then printed to gelatin matrices, which also completely bleached the image, washing out the silver and leaving only the gelatin record of the image. A receiver print, consisting of a 50% density print of the black-and-white negative for the green record strip, and including the soundtrack, was struck and treated with dye mordants to aid in the imbibition process (this "black" layer was discontinued in the early 1940s). The matrices for each strip were coated with their complementary dye (yellow, cyan, or magenta), and then each successively brought into high-pressure contact with the receiver, which would imbibe and hold the dyes which collectively were able to render a wider spectrum of colors than the previous technologies.[11] The first animation film with the three-color (also called three-strip) system was Walt Disney's Flowers and Trees (1932), the first short live-action film was La Cucaracha (1934), and the first feature was Becky Sharp (1935).[3]

There were other subtractive processes, including Gasparcolor, a single-strip 3-color system developed in 1933 by the Hungarian chemist Dr. Bela Gaspar.[12]

The real push for color films, and the nearly immediate changeover from black-and-white production to nearly all color film, was pushed forward by the prevalence of television in the early 1950s. In 1947, only 12 percent of American films were made in color. By 1954, that number rose to over 50 percent.[1] The rise in color films was also aided by the breakup of Technicolor's near monopoly on the medium. In 1947, the United States Justice Department filed an antitrust suit against Technicolor for monopolization of color cinematography (even though rival processes such as Cinecolor and Trucolor were in general use). In 1950, a Federal court ordered Technicolor to allot a number of its three-strip cameras for use by independent studios and filmmakers. Although this certainly affected Technicolor, its real undoing was the invention of Eastmancolor that same year.[1]

Monopack color film

A strip of undeveloped 35 mm color negative.

Modern color film is based on the subtractive color system, which filters colors from white light through dyed or color sensitive layers within a single strip of film. A subtractive color (cyan, magenta, yellow) is what remains when one of the additive primary colors (red, green, blue) has been removed from the spectrum. Eastman Kodak's monopack color film incorporated three separate layers of color sensitive emulsions into one strip of film. Kodachrome was the first commercially successful application of monopack multilayer film, introduced in 1935.[13]

Eastmancolor, introduced in 1950,[14] was Kodak's first economical, single-strip 35 mm negative-recording system incorporated into one strip of film. This rendered three-strip color photography relatively obsolete, even though, for the first few years, Technicolor's quality control in printing produced colors that were more precise than monopack film and the dye-transfer print would maintain its color much longer than an Eastman print, which would fade over time, mostly due to poor processing and improper storage.[4] The first commercial feature film to use Eastmancolor was the documentary Royal Journey, released in December 1951.[14] Hollywood studios waited until an improved version of Eastmancolor negative came out in 1952 before using it.

Technicolor continued to offer the dye-imbibition print process for projection prints until 1975, and even briefly revived it in 1998. As an archival format, Technicolor prints are one of the most stable color print processes yet created, and prints properly cared for are estimated to retain their color for centuries.[15] With the introduction of low-fade (LPP) films, properly stored (at 45 °F or 7 °C and 25 percent relative humidity) monopack color film is expected to last, with no fading, a comparative amount of time. Kodachrome transparency film stored at 0oF (−18 °C) is predicted to last a similar length in time without noticeable picture degradation. Improperly stored monopack color film from before 1983 can incur a 30 percent image loss in as little as 25 years.[16]

How modern color film works

A representation of the layers within a piece of developed modern color 35 mm negative film. When developed, the dye couplers in the blue-, green-, and red-sensitive layers turn the exposed silver halide crystals to their complementary colors (yellow, magenta, and cyan). The film is made up of (A) Clear protective topcoat, (B) UV filter, (C) "Fast" blue layer, (D) "Slow" blue layer, (E) Yellow filter to cut all blue light from passing through to (F) "Fast" green layer, (G) "Slow" green layer, (H) Inter (subbing) layer, (I) "Fast" red layer, (J) "Slow" red layer, (K) Clear triacetate base, and (L) Antihalation (rem-jet) backing.

Modern color film is made up of many different layers all working together to create the color image. In color negative films there are three main color layers: the blue record, green record, and red record; each made up of two separate layers containing silver halide crystals and dye-couplers. A cross-sectional representation of a piece of developed color negative film is shown in the figure at the right. Each layer of the film is so thin that the composite of all layers, in addition to the triacetate base and antihalation backing, is less than 0.0003" (8 µm) thick.[17]

The three color records are stacked as shown at right with a UV filter on top to keep the non-visible ultraviolet radiation from exposing the silver-halide crystals, which are naturally sensitive to UV light. Next are the fast and slow blue-sensitive layers, which, when developed, form the latent image. When the exposed silver-halide crystal is developed, it is coupled with a dye grain of its complementary color. This forms a dye "cloud" (like a drop of water on a paper towel) and is limited in its growth by development-inhibitor-releasing (DIR) couplers, which also serve to refine the sharpness of the processed image by limiting the size of the dye clouds. The dye clouds formed in the blue layer are actually yellow (the opposite or complementary color to blue).[18] There are two layers to each color; a "fast" and a "slow." The fast layer features larger grains that are more sensitive to light than the slow layer, which has finer grain and is less sensitive to light. Silver-halide crystals are naturally sensitive to blue light, so the blue layers are on the top of the film and they are followed immediately by a yellow filter, which stops any more blue light from passing through to the green and red layers and biasing those crystals with extra blue exposure. Next are the red-sensitive record (which forms cyan dyes when developed); and, at the bottom, the green-sensitive record, which forms magenta dyes when developed. Each color is separated by a gelatin layer which prevents silver development in one record from causing unwanted dye formation in another. The bottom of the whole stack (film base) is an anti-halation layer that prevents bright light from reflecting off the clear base of the film and passing back through the negative to double-expose the crystals and create halos of light around bright spots. In color film, this backing is rem-jet, which is a black-pigmented, non-gelatin layer on the back of the film base and is removed in the developing process.[17]

Eastman Kodak manufactures film in 54-inch (1,372 mm) wide rolls. These rolls are then slit into various sizes (65 mm, 35 mm, 16 mm) as needed.

Modern manufacturers of color film for motion picture use

See also List of motion picture film stocks

Motion picture film, primarily because of the rem-jet backing, requires different processing than standard C-41 process color film. The process necessary is Eastman Color Negative 2 (ECN-2), which has an initial step using an alkaline bath to remove the backing layer. There are also minor differences in the remainder of the process. If motion picture negative is run through a standard C-41 color film developer bath, the rem-jet backing will partially dissolve and destroy the integrity of the developer and, potentially, ruin the film.

There are two main companies manufacturing color film for motion picture use: Eastman Kodak and Fujifilm.

Kodak color motion picture films

In the late 1980s, Kodak introduced the T-Grain emulsion, a technological advancement in the shape and make-up of silver halide grains in their films. T-Grain is a tabular silver halide grain that allows for greater overall surface area, resulting in greater light sensitivity with a relatively small grain and a more uniform shape which results in a less overall graininess to the film. This made for sharper and more sensitive films. The T-Grain technology was first employed in Kodak's EXR line of motion picture color negative stocks.[19] This was further refined in 1996 with the Vision line of emulsions, followed by Vision2 in the early 2000s and Vision3 in 2007.

Fuji color motion picture films

Fuji films also integrate tabular grains in their SUFG (Super Unified Fine Grain) films. In their case, the SUFG grain is not only tabular, it is hexagonal and consistent in shape throughout the emulsion layers. Like the T-grain, it has a larger surface area in a smaller grain (about one-third the size of traditional grain) for the same light sensitivity. In 2005, Fuji unveiled their Eterna 500T stock, the first in a new line of advanced emulsions, with Super Nano-structure Σ Grain Technology.

See also

References

  1. ^ a b c d e f g h i j k l David A. Cook, A History of Narrative Film (2nd edition, W. W. Norton & Company, 1990). ISBN 0-393-95553-2
  2. ^ a b c d e f g Ira Konigsberg, The Complete Film Dictionary Meridan PAL Books, 1987) ISBN 0-452-00980-4
  3. ^ a b c d e Ephraim Katz, The Film Encyclopedia (HarperCollins, 1994) ISBN 0-06-273089-4
  4. ^ a b c Monaco, James (1981) (Revised ed) How to Read a Film Oxford University Press. ISBN 0-19-502806-6.
  5. ^ (1917) "Kinemacolor" How to Make and Operate Moving Pictures Funk & Wagnalls. Courtesy of Wide Screen Museum
  6. ^ Slide, Anthony. (1990) "Prizma Color" The American Film Industry: A Historical Dictionary Limelight p. 271. ISBN 0-87910-139-3
  7. ^ Museum Notes, The American Museum Journal (1917), vol. 17, p. 150.
  8. ^ Cornwell-Clyne, Adrian. (1951) Colour Cinematography Chapman and Hall press.
  9. ^ Gracyk, Tim. Leon F. Douglass: Inventor and Victor's First Vice-President (Retrieved on 2007-03-26)
  10. ^ Slide, Anthony. (1990) "Technicolor" The American Film Industry: A Historical Dictionary Limelight pp. 338-340. ISBN 0-87910-139-3
  11. ^ Hart, Martin (2003). "The History of Technicolor" Widescreenmuseum.com. Retrieved 2006-07-07.
  12. ^ "Gasparcolor: Perfect Hues for Animation". Fischinger Archive. http://www.oskarfischinger.org/GasparColor.htm. 
  13. ^ Exploring the Color Image (1996) Eastman Kodak Publication H-188.
  14. ^ a b Chronology of Motion Picture Films: 1940–1959, Kodak.
  15. ^ Wilhelm, Henry with Brower, Carol (1993) The Permanence and Care of Color Photographs. Preservation Publishing Company. Chapter 10 "The Extraordinarily Stable Technicolor Dye Imbibition Motion Picture Color Print Process" pp. 345-366
  16. ^ Holben, Jay (June 1999). "Preserving Negatives for the Next Generation" American Cinematographer Magazine ASC Press. pp. 147-152.
  17. ^ a b Kodak Motion Picture Film (H1) (4th ed). Eastman Kodak Company. ISBN 0-87985-477-4
  18. ^ Holben, Jay. (April 2000). "Taking Stock" Part 1 of 2. American Cinematographer Magazine ASC Press. pp. 118-130
  19. ^ Probst, Christopher. (May 2000). "Taking Stock" Part 2 of 2 American Cinematographer Magazine ASC Press. pp. 110-120

Further reading

  • John Waner, Hollywood's Conversion of All Production to Color, Tobey Publishing, 2000.

External links


Wikimedia Foundation. 2010.

Игры ⚽ Нужен реферат?

Look at other dictionaries:

  • Motion picture film scanner — A motion picture film scanner is a device used in digital filmmaking to scan original film for storage as high resolution digital intermediate files. A film scanner scans original film stock: negative or positive print or reversal/IP. Units may… …   Wikipedia

  • List of motion picture film stocks — This is a list of motion picture camera films. Those films known to no longer be available have been marked as (DISCONTINUED) . This article includes color and black and white negative films, reversal camera films, intermediate stocks, and print… …   Wikipedia

  • motion-picture technology — Introduction       the means for the production and showing of motion pictures. It includes not only the motion picture camera and projector but also such technologies as those involved in recording sound, in editing both picture and sound, in… …   Universalium

  • motion picture — Synonyms and related words: 3 D, Cinemascope, Cinerama, Technicolor, Western, animated cartoon, black and white film, boom shot, cartoon, chiller, cine, cinema, close up, color film, creepie, deuce shot, documentary, documentary film, educational …   Moby Thesaurus

  • Color photography — Color film redirects here. For the motion picture equivalent, see Color motion picture film. A circa 1850 Hillotype photograph of a colored engraving. Long believed to be a complete fraud, recent testing found that Levi Hill s process did… …   Wikipedia

  • Color suite — also called a Color bay or a Telecine suite or Color correction bay. Color suite is the control room for color grading video in a post production environment. The video source could be from: a telecine, a Video tape recorder (VTR), a motion… …   Wikipedia

  • Film stock — This focuses on motion picture film. For still photography film, see photographic film. A film strip Film stock is photographic film on which filmmaking of motion pictures are shot and reproduced. The equivalent in television production is video… …   Wikipedia

  • Motion picture terminology — The film industry is built upon a large number of technologies and techniques, drawing upon photography, stagecraft, music, and many other disciplines. Following is an index of specific terminology applicable thereto.#*180 degree rule *30 degree… …   Wikipedia

  • Academy of Motion Picture Arts and Sciences — Headquarters building Abbreviation AMPAS Formation May 11, 1927 Type Film orga …   Wikipedia

  • List of motion picture distributors — This is a list of motion picture distributors, sorted alphabetically by country.Argentina* Buena Vista International * Warner Bros. * Sony * Fox Distribution Company * Pachamama Cine * Alfa Films * Primer Plano * Columbia Pictures * United… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”