Loom

Loom
Draper power loom in Lowell, Massachusetts
A woman in Konya, Turkey works at a vertical loom
An early nineteenth century Japanese loom with several heddles, which the weaver controls with her foot

A loom is a device used to weave cloth. The basic purpose of any loom is to hold the warp threads under tension to facilitate the interweaving of the weft threads. The precise shape of the loom and its mechanics may vary, but the basic function is the same.

Contents

Etymology

The word "loom" comes from the Old English "geloma" formed from ge-(perfective prefix) and loma, a root of unknown origin; this meant utensil or tool of any kind. In 1404 it was used to mean a machine to enable weaving thread into cloth. [1] By 1838 it had gained the meaning of a machine for interlacing thread as in weaving, knitting or lacemaking. [2]

Weaving

Woman weaving in Nepal

Weaving is done by intersecting the longitudinal threads, the warp, i.e. "that which is thrown across", with the transverse threads, the weft, i.e. "that which is woven".

The major components of the loom are the warp beam, heddles, harnesses, shuttle, reed and takeup roll. In the loom, yarn processing includes shedding, picking, battening and taking-up operations.

  • Shedding. Shedding is the raising of part of the warp yarn to form a shed (the vertical space between the raised and unraised warp yarns), through which the filling yarn, carried by the shuttle, can be inserted. On the modern loom, simple and intricate shedding operations are performed automatically by the heddle or heald frame, also known as a harness. This is a rectangular frame to which a series of wires, called heddles or healds, are attached. The yarns are passed through the eye holes of the heddles, which hang vertically from the harnesses. The weave pattern determines which harness controls which warp yarns, and the number of harnesses used depends on the complexity of the weave. Two common methods of controlling the heddles are dobbies and a Jacquard Head.
  • Picking. As the harnesses raise the heddles or healds, which raise the warp yarns, the shed is created. The filling yarn in inserted through the shed by a small carrier device called a shuttle. The shuttle is normally pointed at each end to allow passage through the shed. In a traditional shuttle loom, the filling yarn is wound onto a quill, which in turn is mounted in the shuttle. The filling yarn emerges through a hole in the shuttle as it moves across the loom. A single crossing of the shuttle from one side of the loom to the other is known as a pick. As the shuttle moves back and forth across the shed, it weaves an edge, or selvage, on each side of the fabric to prevent the fabric from raveling.
  • Battening. As the shuttle moves across the loom laying down the fill yarn, it also passes through openings in another frame called a reed (which resembles a comb). With each picking operation, the reed presses or battens each filling yarn against the portion of the fabric that has already been formed. The point where the fabric is formed is called the fell. Conventional shuttle looms can operate at speeds of about 150 to 160 picks per minute.[3]

With each weaving operation, the newly constructed fabric must be wound on a cloth beam. This process is called taking up. At the same time, the warp yarns must be let off or released from the warp beams. To become fully automatic, a loom needs a filling stop motion which will brake the loom, if the weft thread breaks.[3] An automatic loom requires 0.125 hp to 0.5 hp to operate.

Types of looms

Back strap loom

A back strap loom with a shed-rod.

A simple loom which has its roots in ancient civilizations comprising two sticks or bars between which the warps are stretched. One bar is attached to a fixed object and the other to the weaver usually by means of a strap around the back. On traditional looms, the two main sheds are operated by means of a shed roll over which one set of warps pass, and continuous string heddles which encase each of the warps in the other set. The weaver leans back and uses her body weight to tension the loom. To open the shed controlled by the string heddles, the weaver relaxes tension on the warps and raises the heddles. The other shed is usually opened by simply drawing the shed roll toward the weaver. Both simple and complex textiles can be woven on this loom. Width is limited to how far the weaver can reach from side to side to pass the shuttle. Warp faced textiles, often decorated with intricate pick-up patterns woven in complementary and supplementary warp techniques are woven by indigenous peoples today around the world. They produce such things as belts, ponchos, bags, hatbands and carrying cloths. Supplementary weft patterning and brocading is practiced in many regions. Balanced weaves are also possible on the backstrap loom. Today, commercially produced backstrap loom kits often include a rigid heddle.

Warp weighted loom

The warp-weighted loom is a vertical loom that may have originated in the Neolithic period. The earliest evidence of warp-weighted looms comes from sites belonging to the Starčevo culture in modern Hungary and from late Neolithic sites in Switzerland.[4] This loom was used in Ancient Greece, and spread north and west throughout Europe thereafter.[5] Its defining characteristic is hanging weights (loom weights) which keep bundles of the warp threads taut. Frequently, extra warp thread is wound around the weights. When a weaver has reached the bottom of the available warp, the completed section can be rolled around the top beam, and additional lengths of warp threads can be unwound from the weights to continue. This frees the weaver from vertical size constraints.

Drawloom

A drawloom is a hand-loom for weaving figured cloth. In a drawloom, a "figure harness" is used to control each warp thread separately.[6] A drawloom requires two operators, the weaver and an assistant called a "drawboy" to manage the figure harness.

Handloom

Elements of a foot-treadle floor loom
Warsztat.svg
  1. Wood frame
  2. Seat for weaver
  3. Warp beam- let off
  4. Warp threads
  5. Back beam or platen
  6. Rods – used to make a shed
  7. Heddle frame - heald frame - harness
  8. Heddle- heald - the eye
  9. Shuttle with weft yarn
  10. Shed
  11. Completed fabric
  12. Breast beam
  13. Batten with reed comb
  14. Batten adjustment
  15. Lathe
  16. Treadles
  17. Cloth roll- takeup

A handloom is a simple machine used for weaving in which no power is used. In a wooden vertical-shaft looms the heddles were fixed in place in the shaft. The warp threads pass alternately through a heddle and through a space between the heddles (the shed), so that raising the shaft raises half the threads (those passing through the heddles), and lowering the shaft lowers the same threads—the threads passing through the spaces between the heddles remain in place.

Flying Shuttle

Flying shuttle showing metal capped ends, wheels, and a pirn of weft thread

Hand weavers could only weave a cloth as wide as their armspan. If cloth needed to be wider, two people would do the task (often this would be an adult with a child). John Kay(1704–1779) patented the Flying Shuttle in 1733. The weaver held a picking stick that was attached by cords to a device at both ends of the shed. With a flick of the wrist, one cord was pulled and the shuttle was propelled through the shed to the other end with considerable force, speed and efficiency. A flick in the opposite direction and the shuttle was propelled back. A single weaver had control of this motion but the flying shuttle could weave much wider fabric than an arms length at much greater speeds than had been achieved with the hand thrown shuttle. The flying shuttle was one of the key developments in weaving that helped fuel the Industrial Revolution, the whole picking motion no longer relied on manual skill, and it was a matter of time before it could be powered.

Haute-lisse and basse-lisse looms

Looms used for weaving traditional tapestry are classified as haute-lisse looms, where the warp is suspended vertically between two rolls, and the basse-lisse looms, where the warp extends horizontally between the rolls.

Power looms

Edmund Cartwright built and patented a power loom in 1785, and it was this that was adopted by the nascent cotton industry in England. The silk loom made by Jacques Vaucanson in 1745 operated on the same principles but wasn't developed further. The invention of the flying shuttle by John Kay was critical to the development of a commercially successful power loom.[7] Cartwright's loom was impractical but the ideas were developed by numerous inventors in the Manchester area in England, where by 1818 there were 32 factories containing 5732 looms.[8]

Horrocks loom was viable but it was the Roberts Loom in 1830[9] that marked the turning point. Before this time hand looms had outnumbered power looms. Incremental changes to the three motions continued to be made. The problems of sizing, stop-motions, consistent take-up and a temple to maintain the width remained. In 1841, Kenworthy and Bullough produced the Lancashire Loom[10] which was self-acting or semi-automatic. This enables a 15-year-old spinner to run six looms at the same time. Incrementally, the Dickinson Loom, and then the Keighley born inventor Northrop working for the Draper Corporation in Hopedale produced the fully automatic Northrop Loom which recharged the shuttle when the pirn was empty. The Draper E and X model became the leading products from 1909 until they were challenged by the different characteristics of synthetic fibres such as rayon.[11]

From 1942 the faster and more efficient shuttleless Sulzer looms and the rapier looms were introduced.[12] Modern industrial looms can weave at 2000 weft insertions per minute.[13] Today, advances in technology have produced a variety of looms designed to maximize production for specific types of material. The most common of these are air-jet looms (e.g. “JAT710”[14]) and water-jet looms.

Gallery

Patents

See also

References

  1. ^ Etymology Online
  2. ^ Websters 1913 p=868
  3. ^ a b Collier 1970, p. 104
  4. ^ Barber & 1991 pp.93–96
  5. ^ Crowfoot 1936, p. 36
  6. ^ Burnham 1980, p. 48
  7. ^ Marsden 1892, p. 57
  8. ^ Guest, Richard (1823). "The Compendious History of Cotton-Manufacture". pp. 46. http://www.spinningtheweb.org.uk/a_results.php?x=7&y=2&QueryName=KeyWord&KeyWords=Compendious+History. Retrieved Feb 2009. 
  9. ^ Marsden 1892, p. 76
  10. ^ Marsden 1892, p. 94
  11. ^ Mass 1990
  12. ^ Collier 1970, p. 111
  13. ^ S. Rajagopalan, S.S.M. College of Engineering, Komarapalayam, Pdexcil.org
  14. ^ "Versatile expansion JAT710 air-jet Loom". The Textile Icon News. 05 August 2011. http://www.thetextileicon.com/blog/2011/09/versatile-expansion-by-toyota-jat710-air-jet-loom. Retrieved 2011-27-09. 

Bibliography

External links


Wikimedia Foundation. 2010.

Игры ⚽ Поможем решить контрольную работу

Look at other dictionaries:

  • LOOM — Entwickler: LucasArts Verleger: Softgold Publikation: 1990 Pla …   Deutsch Wikipedia

  • Loom — Éditeur Lucasfilm Games Développeur Lucasfilm Games Concepteur Brian Moriarty …   Wikipédia en Français

  • Loom — Desarrolladora(s) LucasFilm Games Distribuidora(s) LucasFilm Games Diseñador(es) Brian Moriarty Plataforma(s) …   Wikipedia Español

  • LOOM — Разработчик Lucasfilm Games Издатель …   Википедия

  • Loom — (das englische Wort bedeutet Webstuhl) steht für: Loom (Computerspiel), ein Spiel von LucasFilm Games (1990) Loom (West Virginia), ein Ort in der USA Power Loom (engl. dampfkraftbetriebene Webmaschine), teilw. auch allgemein Webmaschine Loom… …   Deutsch Wikipedia

  • loom — loom; loom·ery; wark·loom; heir·loom; …   English syllables

  • Loom — (l[=oo]m), v. i. [imp. & p. p. {Loomed} (l[=oo]md); p. pr. & vb. n. {Looming}.] [OE. lumen to shine, Icel. ljoma; akin to AS. le[ o]ma light, and E. light; or cf. OF. lumer to shine, L. luminare to illumine, lumen light; akin to E. light.… …   The Collaborative International Dictionary of English

  • Loom — (l[=oo]m), n. [OE. lome, AS. gel[=o]ma utensil, implement.] [1913 Webster] 1. A frame or machine of wood or other material, in which a weaver forms cloth out of thread; a machine for interweaving yarn or threads into a fabric, as in knitting or… …   The Collaborative International Dictionary of English

  • loom — UK US /luːm/ verb [I] ► if an unpleasant event looms, it will probably happen and makes people worry: »Stocks of heating oil are at their lowest levels for years, and another crisis may be looming. »The company is in serious financial trouble,… …   Financial and business terms

  • Loom — (l[=oo]m), n. (Zo[ o]l.) See {Loon}, the bird. [1913 Webster] …   The Collaborative International Dictionary of English

  • Loom — Loom, n. The state of looming; esp., an unnatural and indistinct appearance of elevation or enlargement of anything, as of land or of a ship, seen by one at sea. [1913 Webster] …   The Collaborative International Dictionary of English

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”