Causal system

Causal system

A causal system (also known as a physical or nonanticipative system) is a system where the output depends on past/current inputs but not future inputs i.e. the output y(t0) only depends on the input x(t) for values of t \le t_{0}.

The idea that the output of a function at any time depends only on past and present values of input is defined by the property commonly referred to as causality. A system that has some dependence on input values from the future (in addition to possible dependence on past or current input values) is termed a non-causal or acausal system, and a system that depends solely on future input values is an anticausal system. Note that some authors have defined an anticausal system as one that depends solely on future and present input values or, more simply, as a system that does not depend on past input values.

Classically, nature or physical reality has been considered to be a causal system. Physics involving special relativity or general relativity require more careful definitions of causality, as described elaborately in causality (physics).

The causality of systems also plays an important role in digital signal processing, where filters are often constructed so that they are causal. For more information, see causal filter. A causal system is said to be highly stable system as outputs only depend on past history of the system and not on any future input, which means, the system is not vulnerable to future failures. For a causal system, the impulse response of the system must be 0 for all t<0. That is the sole necessary as well as sufficient condition for causality of a system, linear or non-linear.

Note that the systems may be discrete or continuous. Similar rules apply to both kind of systems.

Contents

Mathematical definitions

Definition 1: A system mapping x to y is causal if and only if, for any pair of input signals x1(t) and x2(t) such that

x_{1}(t) = x_{2}(t), \quad \forall \ t \le t_{0},

the corresponding outputs satisfy

y_{1}(t) = y_{2}(t), \quad \forall \ t \le t_{0}.

Definition 2: Suppose h(t) is the impulse response of the system H. (only fully accurate for a system described by linear constant coefficient differential equation)

h(t) = 0, \quad \forall \ t <0

then the system H is causal, otherwise it is non-causal.

Examples

The following examples are for systems with an input x and output y.

Examples of causal systems

  • Memoryless system
y \left( t \right) = 1 + x \left( t \right) \cos \left( \omega t \right)
  • Autoregressive filter
y \left( t \right) = \int_0^\infty x(t-\tau) e^{-\beta\tau}\,d\tau

Examples of non-causal (acausal) systems

y(t)=\int_{-\infty}^\infty \sin (t+\tau) x(\tau)\,d\tau
  • Central moving average
y_n=\frac{1}{2}\,x_{n-1}+\frac{1}{2}\,x_{n+1}
  • For coefficients of t
y \left( t \right) =x(at)

Examples of anti-causal systems

y(t) =\int _0^\infty \sin (t+\tau) x(\tau)\,d\tau
y \left( t \right) =x(-t)
  • Look-ahead
yn = xn + 1

References

  • Oppenheim, Alan V.; Willsky, Alan S.; Nawab, Hamid; with S. Hamid (1998). Signals and Systems. Pearson Education. ISBN 0-13-814757-4. 

Wikimedia Foundation. 2010.

Игры ⚽ Поможем сделать НИР

Look at other dictionaries:

  • System analysis — See also systems analysis. : MISO redirects here, for the data line see Serial Peripheral Interface Bus. System analysis is the branch of electrical engineering that characterizes electrical systems and their properties. Although many of the… …   Wikipedia

  • Causal filter — In signal processing, a causal filter is a linear and time invariant causal system. The word causal indicates that the filter output depends only on past and present inputs. A filter whose output also depends on future inputs is acausal. A filter …   Wikipedia

  • Causal layered analysis — (CLA) is one of several futures techniques used as a means to inquire into the causes of social phenomena and to generate a set of forecasts as to the future course of the phenomena.As a theory, CLA seeks to integrate empiricist, interpretive,… …   Wikipedia

  • Causal consistency — is one of the consistency models used in the domain of the concurrent programming (e.g in distributed shared memory, distributed transactions etc).A system provides causal consistency if writes that potentially are causally related are seen by… …   Wikipedia

  • System dynamics — [ John Sterman 2001.] System dynamics is an approach to understanding the behaviour of complex systems over time. It deals with internal feedback loops and time delays that affect the behaviour of the entire system. [http://sysdyn.clexchange.org… …   Wikipedia

  • Causal loop diagram — A causal loop diagram(CLD) is a diagram that aids in visualizing how interrelated variables affect one another. The diagram consists of a set of nodes representing the variables connected together. The relationships between these variables,… …   Wikipedia

  • Causal dynamical triangulation — Beyond the Standard Model Standard Model …   Wikipedia

  • System safety — The system safety concept calls for a risk management strategy based on identification, analysis of hazards and application of remedial controls using a systems based approach.cite book|title= System Safety Engineering and… …   Wikipedia

  • Causal model — A causal model is an abstract model that uses cause and effect logic to describe the behaviour of a system.ee also*Bayesian network *Causal loop diagram *Systems biology *Econometrics *Forecasting …   Wikipedia

  • causal ontology — noun Language or other descriptive system which restricts that which can be described to that which can be. If English were a causal ontology, you could not say or write I ate my house, because you cannot eat a house …   Wiktionary

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”