Convection

Convection
This figure shows a calculation for thermal convection in the Earth's mantle. Colors closer to red are hot areas and colors closer to blue are cold areas. A hot, less-dense lower boundary layer sends plumes of hot material upwards, and likewise, cold material from the top moves downwards.

Convection is the movement of molecules within fluids (i.e. liquids, gases) and rheids. It cannot take place in solids, since neither bulk current flows nor significant diffusion can take place in solids.

Convection is one of the major modes of heat transfer and mass transfer. Convective heat and mass transfer take place through both diffusion – the random Brownian motion of individual particles in the fluid – and by advection, in which matter or heat is transported by the larger-scale motion of currents in the fluid. In the context of heat and mass transfer, the term "convection" is used to refer to the sum of advective and diffusive transfer.[1] Note that in common use the term convection may refer loosely to heat transfer by convection, as opposed to mass transfer by convection, or the convection process in general. Sometimes "convection" is even used to refer specifically to "free heat convection" (natural heat convection), as opposed to forced heat convection. However, in mechanics the correct use of the word is the general sense, and different types of convection should be properly qualified for clarity.

Convection can be qualified in terms of being natural, forced, gravitational, granular, or thermomagnetic. It may also be said to be due to combustion, capillary action, or Marangoni and Weissenberg effects. Due to its role in heat transfer, natural convection plays a role in the stucture of Earth's atmosphere, its oceans, and its mantle. Discrete convective cells in the atmosphere can be seen as clouds, with stronger convection resulting in thunderstorms. Natural convection also plays a role in stellar physics.

Contents

Terminology

The term "convection" may have slightly different but related usages in different contexts. The broader sense is in fluid mechanics, where "convection" refers to the motion of fluid (regardless of cause).[2] However in thermodynamics "convection" often refers specifically to heat transfer by convection.[3]

Additionally, convection includes fluid movement both by bulk motion (advection) and by the motion of individual particles (diffusion). However in some cases, convection is taken to mean only advective phenomena. For instance, in the transport equation, which describes a number of different transport phenomena, terms are separated into "convective" and "diffusive" effects, with "convective" meaning purely advective in context. A similar differentiation is made in the Navier–Stokes equations. In such cases the precise meaning of the term may be clear only from context.

Examples and applications of convection

Convection occurs on a large scale in atmospheres, oceans, planetary mantles, and it provides the mechanism of heat transfer for a large fraction of the outermost interiors of our sun and all stars. Fluid movement during convection may be invisibly slow, or it may be obvious and rapid, as in a hurricane. On astronomical scales, convection of gas and dust is thought to occur in the accretion disks of black holes, at speeds which may closely approach that of light.

Heat transfer

A heat sink provides a large surface area for convection to efficiently carry away heat.

Convective heat transfer is a mechanism of heat transfer occurring because of bulk motion (observable movement) of fluids.[4] Heat is the entity of interest being advected (carried), and diffused (dispersed). This can be contrasted with conductive heat transfer, which is the transfer of energy by vibrations at a molecular level through a solid or fluid, and radiative heat transfer, the transfer of energy through electromagnetic waves.

Heat is transferred by convection in numerous examples of naturally occurring fluid flow, such as: wind, oceanic currents, and movements within the Earth's mantle. Convection is also used in engineering practices to provide desired temperature changes, as in heating of homes, industrial processes, cooling of equipment, etc.

The rate of convective heat transfer may be improved by the use of a heat sink, often in conjunction with a fan. For instance, a typical computer CPU will have a purpose-made fan to ensure its operating temperature is kept within tolerable limits.

Convection cells

Convection cells in a gravity field

A convection cell, also known as a Bénard cell is a characteristic fluid flow pattern in many convection systems. A rising body of fluid typically loses heat because it encounters a cold surface; because it exchanges heat with colder liquid through direct exchange; or in the example of the Earth's atmosphere, because it radiates heat. Because of this heat loss the fluid becomes denser than the fluid underneath it, which is still rising. Since it cannot descend through the rising fluid, it moves to one side. At some distance, its downward force overcomes the rising force beneath it, and the fluid begins to descend. As it descends, it warms again and the cycle repeats itself.

Atmospheric circulation

Idealised depiction of the global circulation on Earth

Atmospheric circulation is the large-scale movement of air, and the means (together with the smaller ocean circulation) by which thermal energy is distributed on the surface of the Earth. The large-scale structure of the atmospheric circulation varies from year to year, but the basic climatological structure remains fairly constant.

Latitudinal circulation is the consequence of the fact that incident solar radiation per unit area is highest at the heat equator, and decreases as the latitude increases, reaching its minimum at the poles. It consists of two primary convection cells, the Hadley cell and the polar vortex.

Longitudinal circulation, on the other hand, comes about because water has a higher specific heat capacity than land and thereby absorbs and releases more heat, but the temperature changes less than land. This effect is noticeable; it is what brings the sea breeze, air cooled by the water, ashore in the day, and carries the land breeze, air cooled by contact with the ground, out to sea during the night. Longitudinal circulation consists of two cells, the Walker circulation and El Niño / Southern Oscillation.

Weather

How Foehn is produced

More localized phenomena than global atmospheric movement are also due to convection, including wind and some of the hydrologic cycle. For example, a foehn wind is a type of down-slope wind which occurs in the downwind side of a mountain range. It results from the adiabatic warming of air which has dropped most of its moisture on windward slopes.[5] As a consequence of the different adiabatic lapse rates of moist and dry air, the air on the leeward slopes becomes warmer than equivalent elevations on the windward slopes.

A thermal column (or thermal) is a vertical section of rising air in the lower altitudes of the Earth's atmosphere. Thermals are created by the uneven heating of the Earth's surface from solar radiation. The Sun warms the ground, which in turn warms the air directly above it. The warmer air expands, becoming less dense than the surrounding air mass, and creating a thermal low.[6][7] The mass of lighter air rises, and as it does, it cools due to its expansion at lower high-altitude pressures. It stops rising when it has cooled to the same temperature as the surrounding air. Associated with a thermal is a downward flow surrounding the thermal column. The downward moving exterior is caused by colder air being displaced at the top of the thermal. Another convection-driven weather effect is the sea breeze.[8][9]

Stages of a thunderstorm's life.

Warm air has a lower density than cool air, so warm air rises within cooler air,[10] similar to hot air balloons.[11] Clouds form as relatively warmer air carrying moisture rises within cooler air. As the moist air rises, it cools causing some of the water vapor in the rising packet of air to condense.[12] When the moisture condenses, it releases energy known as latent heat of fusion which allows the rising packet of air to cool less than its surrounding air,[13] continuing the cloud's ascension. If enough instability is present in the atmosphere, this process will continue long enough for cumulonimbus clouds to form, which support lightning and thunder. Generally, thunderstorms require three conditions to form: moisture, an unstable airmass, and a lifting force (heat).

All thunderstorms, regardless of type, go through three stages: the developing stage, the mature stage, and the dissipation stage.[14] The average thunderstorm has a 24 km (15 mi) diameter. Depending on the conditions present in the atmosphere, these three stages take an average of 30 minutes to go through.[15]

Oceanic circulation

Ocean currents

Solar radiation affects the oceans: warm water from the Equator tends to circulate toward the poles, while cold polar water heads towards the Equator. The surface currents are initially dictated by surface wind conditions. The trade winds blow westward in the tropics,[16] and the westerlies blow eastward at mid-latitudes.[17] This wind pattern applies a stress to the subtropical ocean surface with negative curl across the Northern Hemisphere,[18] and the reverse across the Southern Hemisphere. The resulting Sverdrup transport is equatorward.[19] Because of conservation of potential vorticity caused by the poleward-moving winds on the subtropical ridge's western periphery and the increased relative vorticity of poleward moving water, transport is balanced by a narrow, accelerating poleward current, which flows along the western boundary of the ocean basin, outweighing the effects of friction with the cold western boundary current which originates from high latitudes.[20] The overall process, known as western intensification, causes currents on the western boundary of an ocean basin to be stronger than those on the eastern boundary.[21]

As it travels poleward, warm water transported by the strong warm water current undergoes evaporative cooling. The cooling is wind driven: wind moving over the water cools it and also causes evaporation, leaving a saltier brine. In this process, the water increases in salinity and density, and decreases in temperature. Once sea ice forms, salts are left out of the ice, a process known as brine exclusion.[22] These two processes produce water that is denser and colder (or, more precisely, water that is still liquid at a lower temperature). The water across the northern Atlantic ocean becomes so dense that it begins to sink down through less salty and less dense water. (The convective action is not unlike that of a lava lamp.) This downdraft of heavy, cold and dense water becomes a part of the North Atlantic Deep Water, a southgoing stream.[23]

Mantle convection

An oceanic plate is added to by upwelling (left) and consumed at a subduction zone (right).

Mantle convection is the slow creeping motion of Earth's rocky mantle caused by convection currents carrying heat from the interior of the earth to the surface.[24] It is the driving force that causes tectonic plates to move around the Earth's surface.[25]

The Earth's surface is divided into a number of tectonic plates that are continuously being created and consumed at their opposite plate boundaries. Creation (accretion) occurs as mantle is added to the growing edges of a plate. This hot added material cools down by conduction and convection of heat. At the consumption edges of the plate, the material has thermally contracted to become dense, and it sinks under its own weight in the process of subduction at an ocean trench. This subducted material sinks to some depth in the Earth's interior where it is prohibited from sinking further. The subducted oceanic crust triggers volcanism.

Stack effect

The Stack effect or chimney effect is the movement of air into and out of buildings, chimneys, flue gas stacks, or other containers due to buoyancy. Buoyancy occurs due to a difference in indoor-to-outdoor air density resulting from temperature and moisture differences. The greater the thermal difference and the height of the structure, the greater the buoyancy force, and thus the stack effect. The stack effect helps drive natural ventilation and infiltration. Some cooling towers operate on this principle; similarly the solar updraft tower is a proposed device to generate electricity based on the stack effect.

Stellar physics

An illustration of the structure of the Sun and a red giant star, showing their convective zones. These are the granular zones in the outer layers of these stars.
Granules—the tops or upper visible sizes of convection cells, seen on the photosphere of the Sun. These are caused by the convection in the upper photosphere of the Sun. North America is superimposed on the same scale, to indicate scale.

The convection zone of a star is the range of radii in which energy is transported primarily by convection.

Granules on the photosphere of the Sun are the visible tops of convection cells in the photosphere, caused by convection of plasma in the photosphere. The rising part of the granules is located in the center where the plasma is hotter. The outer edge of the granules is darker due to the cooler descending plasma. A typical granule has a diameter on the order of 1,000 kilometers and each lasts 8 to 20 minutes before dissipating. Below the photosphere is a layer of much larger "supergranules" up to 30,000 kilometers in diameter, with lifespans of up to 24 hours.

The image shows the solar photosphere where granules are visible. North America is superimposed to provide a sense of scale.

Convection mechanisms

Convection may happen in fluids at all scales larger than a few atoms. There are a variety of circumstances in which the forces required for natural and forced convection arise, leading to different types of convection, described below. In broad terms, convection arises because of body forces acting within the fluid, such as gravity (buoyancy), or surface forces acting at a boundary of the fluid.

The causes of convection are generally described as one of either "natural" ("free") or "forced", although other mechanisms also exist (discussed below). However the distinction between natural and forced convection is particularly important for convective heat transfer.

Natural convection

Natural convection, or free convection, occurs due to temperature differences which affect the density, and thus relative buoyancy, of the fluid. Heavier (more dense) components will fall, while lighter (less dense) components rise, leading to bulk fluid movement. Natural convection can only occur, therefore, in a gravitational field. A common example of natural convection is the rise of smoke from a fire. it can seen in a pot of boiling water in which the hot and less-dense water on the bottom layer moves upwards in plumes, and the cool and more dense water near the top of the pot likewise sinks.

Natural convection will be more likely and/or more rapid with a greater variation in density between the two fluids, a larger acceleration due to gravity that drives the convection, and/or a larger distance through the convecting medium. Natural convection will be less likely and/or less rapid with more rapid diffusion (thereby diffusing away the thermal gradient that is causing the convection) and/or a more viscous (sticky) fluid.

The onset of natural convection can be determined by the Rayleigh number (Ra).

Note that differences in buoyancy within a fluid can arise for reasons other than temperature variations, in which case the fluid motion is called gravitational convection (see below). However, all types of buoyant convection, including natural convection, do not occur in microgravity environments. All require the presence of an environment which experiences g-force (proper acceleration).

Forced convection

In forced convection, also called heat advection, fluid movement results from external surface forces such as a fan or pump. Forced convection is typically used to increase the rate of heat exchange. Many types of mixing also utilize forced convection to distribute one substance within another. Forced convection also occurs as a by-product to other processes, such as the action of a propeller in a fluid or aerodynamic heating. Fluid radiator systems, and also heating and cooling of parts of the body by blood circulation, are other familiar examples of forced convection.

Forced convection may happen by natural means, such as when the heat of a fire causes expansion of air and bulk air flow by this means. In microgravity, such flow (which happens in all directions) along with diffusion is the only means by which fires are able to draw in fresh oxygen to maintain themselves. The shock wave that transfers heat and mass out of explosions is also a type of forced convection.

Although forced convection from thermal gas expansion in zero-g does not fuel a fire as well as natural convection in a gravity field, some types of artificial forced convection are far more efficient than free convection, as they are not limited by natural mechanisms. For instance, a convection oven works by forced convection, as a fan which rapidly circulates hot air forces heat into food faster than would naturally happen due to simple heating without the fan.

Gravitational or buoyant convection

Gravitational convection is a type of natural convection induced by buoyancy variations resulting from material properties other than temperature. Typically this is caused by a variable composition of the fluid. If the varying property is a concentration gradient, it is known as solutal convection.[26] For example, gravitational convection can be seen in the diffusion of a source of dry salt downward into wet soil due to the buoyancy of fresh water in saline.[27]

Variable salinity in water and variable water content in air masses are frequent causes of convection in the oceans and atmosphere which do not involve heat, or else involve additional compositional density factors other than the density changes from thermal expansion (see thermohaline circulation). Similarly, variable composition within the Earth's interior which has not yet achieved maximal stability and minimal energy (in other words, with densest parts deepest) continues to cause a fraction of the convection of fluid rock and molten metal within the Earth's interior (see below).

Gravitational convection, like natural thermal convection, also requires a g-force environment in order to occur.

Granular convection

Vibration-induced convection occurs in powders and granulated materials in containers subject to vibration where an axis of vibration is parallel to the force of gravity. When the container accelerates upward, the bottom of the container pushes the entire contents upward. In contrast, when the container accelerates downward, the sides of the container push the adjacent material downward by friction, but the material more remote from the sides is less affected. The net result is a slow circulation of particles downward at the sides, and upward in the middle.

If the container contains particles of different sizes, the downward-moving region at the sides is often narrower than the largest particles. Thus, larger particles tend to become sorted to the top of such a mixture. This is one possible explanation of the Brazil nut effect.

Thermomagnetic convection

Thermomagnetic convection can occur when an external magnetic field is imposed on a ferrofluid with varying magnetic susceptibility. In the presence of a temperature gradient this results in a nonuniform magnetic body force, which leads to fluid movement. A ferrofluid is a liquid which becomes strongly magnetized in the presence of a magnetic field.

This form of heat transfer can be useful for cases where conventional convection fails to provide adequate heat transfer, e.g., in miniature microscale devices or under reduced gravity conditions.

Capillary action

Capillary action is a phenomenon where liquid spontaneously rises in a narrow space such as a thin tube, or in porous materials. This effect can cause liquids to flow against the force of gravity. It occurs because of inter-molecular attractive forces between the liquid and solid surrounding surfaces; If the diameter of the tube is sufficiently small, then the combination of surface tension and forces of adhesion between the liquid and container act to lift the liquid.

Marangoni effect

The Marangoni effect is the convection of fluid along an interface between dissimilar substances because of variations in surface tension. Surface tension can vary because of inhomogeneous composition of the substances, and/or the temperature-dependence of surface tension forces. In the latter case the effect is known as thermo-capillary convection.

A well-known phenomenon exhibiting this type of convection is the "tears of wine".

Weissenberg effect

The Weissenberg effect is a phenomenon that occurs when a spinning rod is placed into a solution of liquid polymer. Entanglements cause the polymer chains to be drawn towards the rod instead of being thrown outward as would happen with an ordinary fluid (i.e., water).

Combustion

In a zero-gravity environment, there can be no buoyancy forces, and thus no natural (free) convection possible, so flames in many circumstances without gravity smother in their own waste gases. However, flames may be maintained with any type of forced convection (breeze); or (in high oxygen environments in "still" gas environments) entirely from the minimal forced convection that occurs as heat-induced expansion (not buoyancy) of gases allows for ventilation of the flame, as waste gases move outward and cool, and fresh high-oxygen gas moves in to take up the low pressure zones created when flame-exhaust water condenses.[28]

Mathematical models of convection

Mathematically, convection can be described by the convection–diffusion equation or the generic scalar transport equation.

Quantifying natural versus forced convection

In cases of mixed convection (natural and forced occurring together) one would often like to know how much of the convection is due to external constraints, such as the fluid velocity in the pump, and how much is due to natural convection occurring in the system.

The relative magnitudes of the Grashof and Reynolds number squared determine which form of convection dominates. if \frac{Gr}{Re^2} \gg 1 forced convection may be neglected, whereas if \frac{Gr}{Re^2} \ll 1 natural convection may be neglected. If the ratio is approximately one, then both forced and natural convection need to be taken into account.

See also

References

  1. ^ Frank P. Incropera; David P. De Witt and D. P. Dewitt (1990). Fundamentals of Heat and Mass Transfer (3rd ed.). John Wiley & Sons. ISBN 0-471-51729-1. 
  2. ^ Munson, Bruce R.. Fundamentals of Fluid Mechanics. John Wiley & Sons. ISBN 047185526X. 
  3. ^ Çengel, Yunus A.; Boles, Michael A.. Thermodynamics:An Engineering Approach. McGraw-Hill Education. ISBN 007121688X. 
  4. ^ Yugnus A Cengel (2003), “Heat transfer-A Practical Approach” 2nd ed. Publisher McGraw Hill Professional, p26 by ISBN 0072458933, 9780072458930, Google Book Search. Accessed 20-04.-09
  5. ^ Dr. Michael Pidwirny (2008). "CHAPTER 8: Introduction to the Hydrosphere (e). Cloud Formation Processes". Physical Geography. http://www.physicalgeography.net/fundamentals/8e.html. Retrieved 2009-01-01. 
  6. ^ National Weather Service Forecast Office in Tucson, Arizona (2008). "What is a monsoon?". National Weather Service Western Region Headquarters. http://www.wrh.noaa.gov/twc/monsoon/monsoon_whatis.php. Retrieved 2009-03-08. 
  7. ^ Douglas G. Hahn and Syukuro Manabe (1975). "The Role of Mountains in the South Asian Monsoon Circulation". Journal of Atmospheric Sciences 32 (8): 1515–1541. Bibcode ...32.1515H 1975JAtS ...32.1515H. doi:10.1175/1520-0469(1975)032<1515:TROMIT>2.0.CO;2. ISSN 1520-0469. 
  8. ^ University of Wisconsin. Sea and Land Breezes. Retrieved on 2006-10-24.
  9. ^ JetStream: An Online School For Weather (2008). The Sea Breeze. National Weather Service. Retrieved on 2006-10-24.
  10. ^ Albert Irvin Frye (1913). Civil engineers' pocket book: a reference-book for engineers, contractors. D. Van Nostrand Company. p. 462. http://books.google.com/?id=PDtIAAAAIAAJ&pg=PA462&lpg=PA462&dq=density+varies+by+temperature+book&q=. Retrieved 2009-08-31. 
  11. ^ Yikne Deng (2005). Ancient Chinese Inventions. Chinese International Press. pp. 112–13. ISBN 9787508508375. http://books.google.com/?id=ssO_19TRQ9AC&pg=PA112&dq=Kongming+balloon. Retrieved 2009-06-18. 
  12. ^ FMI (2007). "Fog And Stratus – Meteorological Physical Background". Zentralanstalt für Meteorologie und Geodynamik. http://www.zamg.ac.at/docu/Manual/SatManu/main.htm?/docu/Manual/SatManu/CMs/FgStr/backgr.htm. Retrieved 2009-02-07. 
  13. ^ Chris C. Mooney (2007). Storm world: hurricanes, politics, and the battle over global warming. Houghton Mifflin Harcourt. p. 20. ISBN 9780151012879. http://books.google.com/?id=RRSzR4NQdGkC&pg=PA20&lpg=PA20&dq=cloud+formation+latent+heat+book&q=. Retrieved 2009-08-31. 
  14. ^ Micheal H. Mogil (2007). Extreme Weather. New York: Black Dog & Leventhal Publisher. pp. 210–211. ISBN 978-1-57912-743-5. 
  15. ^ National Severe Storms Laboratory (2006-10-15). "A Severe Weather Primer: Questions and Answers about Thunderstorms". National Oceanic and Atmospheric Administration. http://www.nssl.noaa.gov/primer/tstorm/tst_basics.html. Retrieved 2009-09-01. 
  16. ^ Glossary of Meteorology (2009). "trade winds". Glossary of Meteorology. American Meteorological Society. http://amsglossary.allenpress.com/glossary/search?id=trade-winds1. Retrieved 2008-09-08. 
  17. ^ Glossary of Meteorology (2009). Westerlies. American Meteorological Society. Retrieved on 2009-04-15.
  18. ^ Matthias Tomczak and J. Stuart Godfrey (2001). Regional Oceanography: an Introduction. Matthias Tomczak, pp. 42. ISBN 81-7035-306-8. Retrieved on 2009-05-06.
  19. ^ Earthguide (2007). Lesson 6: Unraveling the Gulf Stream Puzzle - On a Warm Current Running North. University of California at San Diego. Retrieved on 2009-05-06.
  20. ^ Angela Colling (2001). Ocean circulation. Butterworth-Heinemann, pp. 96. Retrieved on 2009-05-07.
  21. ^ National Environmental Satellite, Data, and Information Service (2009). Investigating the Gulf Stream. North Carolina State University. Retrieved on 2009-05-06.
  22. ^ Russel, Randy. "Thermohaline Ocean Circulation". University Corportation for Atmospheric Research. http://www.windows.ucar.edu/tour/link=/earth/Water/thermohaline_ocean_circulation.html. Retrieved 2009-01-06. 
  23. ^ Behl, R.. "Atlantic Ocean water masses". California State University Long Beach. Archived from the original on May 23, 2008. http://web.archive.org/web/20080523170145/http://seis.natsci.csulb.edu/rbehl/NADW.htm. Retrieved 2009-01-06. 
  24. ^ Kobes, Randy and Gabor Kunstatter (2002-12-16). "Mantle Convection". Physics Department, University of Winnipeg. http://theory.uwinnipeg.ca/mod_tech/node195.html. Retrieved 2010-01-03. 
  25. ^ Kent C. Condie (1997). Plate tectonics and crustal evolution (4th ed.). Butterworth-Heinemann. p. 5. ISBN 0-7506-3386-7. http://books.google.com/books?id=HZrA6OQzsvgC&pg=PA5. 
  26. ^ "CiteSeerX — Pattern Formation in Solutal Convection: Vermiculated Rolls and Isolated Cells". Citeseerx.ist.psu.edu. http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.15.8288. Retrieved 2010-09-12. 
  27. ^ Raats, P. A. C. (1969). "Steady Gravitational Convection Induced by a Line Source of Salt in a Soil". Soil Science Society of America Proceedings 33 (4): 483. doi:10.2136/sssaj1969.03615995003300040005x. 
  28. ^ Does a candle burn in zero-g?

External links


Wikimedia Foundation. 2010.

Игры ⚽ Нужно решить контрольную?

Look at other dictionaries:

  • convection — [ kɔ̃vɛksjɔ̃ ] n. f. • 1877; lat. convectum, de vehere « transporter » 1 ♦ Phys. Transport d une grandeur physique (masse, courant électrique, chaleur) dans un fluide par un déplacement de l ensemble de ses molécules. Convection libre ou… …   Encyclopédie Universelle

  • Convection — Con*vec tion, n. [L. convectio, fr. convehere to bring together; con + vehere to carry.] 1. The act or process of conveying or transmitting. [1913 Webster] 2. (Physics) A process of transfer or transmission, as of heat or electricity, by means of …   The Collaborative International Dictionary of English

  • convection — (n.) 1620s, from L. convectionem (nom. convectio) the act of carrying, from convect , pp. stem of convehere to carry together, from com together (see COM (Cf. com )) + vehere to carry (see VEHICLE (Cf. vehicle)) …   Etymology dictionary

  • convection — ► NOUN ▪ transference of mass or heat within a fluid caused by the tendency of warmer and less dense material to rise. DERIVATIVES convect verb convectional adjective convective adjective. ORIGIN Latin, from convehere, from vehere carry …   English terms dictionary

  • convection — [kən vek′shən] n. [L convectio < pp. of convehere, to bring together < com , together + vehere, to carry, bear] 1. a transmitting or conveying 2. a) the mass movement of parts of a fluid within the fluid because of differences in the… …   English World dictionary

  • Convection — La convection est un mode de transfert qui implique un déplacement de matière dans le milieu, par opposition à la conduction thermique ou diffusion de la matière. La matière est advectée (transportée conduite, mais ces termes sont en fait… …   Wikipédia en Français

  • convection — convectional, adj. /keuhn vek sheuhn/, n. 1. Physics. the transfer of heat by the circulation or movement of the heated parts of a liquid or gas. 2. Meteorol. the vertical transport of atmospheric properties, esp. upward (distinguished from… …   Universalium

  • convection — [[t]kənve̱kʃ(ə)n[/t]] N UNCOUNT Convection is the process by which heat travels through air, water, and other gases and liquids. [TECHNICAL] ...clouds which lift warm, moist air by convection high into the atmosphere. ...convection currents …   English dictionary

  • convection — noun Etymology: Late Latin convection , convectio, from Latin convehere to bring together, from com + vehere to carry more at way Date: circa 1623 1. the action or process of conveying 2. a. the circulatory motion that occurs in a fluid at a… …   New Collegiate Dictionary

  • convection — Conveyance of heat in liquids or gases by movement of the heated particles, as when the layer of water at the bottom of a heated pot rises or the warm air of a room ascends to the ceiling. [L. con veho, pp. vectus, to carry or bring together] * * …   Medical dictionary

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”