Rheological ammunition

Rheological ammunition

Rheological ammunition utilizes a rheological substance that can be controlled by injecting a current or introducing a magnetic field to the projectiles core, thereby changing some properties of the projectile. The idea is to create a projectile with a core that can be hard or soft depending on adjustable settings on the weapon. Or development of special purpose ammunition.

Possible scenarios and use

The optimal goal is to create a projectile that can be electronically controlled and used in a wide range of situations. Mainly, military and law enforcements scenarios. A soldier can fire live and less lethal ammunitions from the same magazine by choosing weapon settings. A police officer may fire a less lethal projectile and seconds later fire an armour piercing projectile. All from the same magazine loaded with identical rheological ‘bullets’.

cenario with Rheological small arms calibre ammunition

A Rheological projectile (bullet) is supported by a magnetic sabot. The magnetic sabot controls the core properties. As long as the sabot remains in place the core is firm and support the jacket. The projectile will penetrate target without deformation.

Below: A projectile with a magnetic sabot is penetrating an armoured target. After the initial penetration (A) the magnetic sabot is discarded (B) and the projectile core is changing from hard to soft allowing deformation of the projectile (C). After the deformation the projectile have similarity with hollow point ammunition both in deformation and wound ballistics.

Applications range from "entry" ammunition allowing penetration of doors, armours etc. without risking over penetration and the safety of third party.

Development phase

Some few patents exists (like US. patent 6553.913 B1 from 2003) but no commercial available projectile will be available for some time to come.

Weapon Platform

It will probably first be made available for large calibre riot-guns. Where the large calibre makes it possible to make room for electronics and the battery. But later they will find there way into small calibre firearms. As the inner-ballistics will change between the projectiles fired (Depending on the properties that the projectiles acquired during the reloading process). The obvious choice is to use a firearm with a Rheological fluids based firearms mechanisms that can adopt accordingly in a split of a second.


Wikimedia Foundation. 2010.

Игры ⚽ Нужно сделать НИР?

Look at other dictionaries:

  • Rheological fluids based firearms mechanisms — A rheological fluid based mechanism (or RB MECHANISM) is a method for designing and powering firearms and ordnance. The mechanisms currently used by firearms and ordnance utilize combustion of gunpowder to propel ammunition. An RB MECHANISM… …   Wikipedia

  • Ammunition — This article is about ammunition for firearms and artillery. For the product design company, see Ammunition Design Group. A belt of 0.50 caliber ammunition loaded to a …   Wikipedia

  • Fiocchi Munizioni — (Fiocchi Ammunition) is one of Italy s largest and oldest manufacturers of ammunitions.The Company s headquarters and main production plant are in Via Santa Barbara in Lecco, Italy. History Fiocchi Munizioni was founded on 3rd July 1876 in Lecco …   Wikipedia

  • Firearm — A firearm is a tool that projects either single or multiple projectiles at high velocity through a controlled explosion. The firing is achieved by the gases produced through rapid, confined burning of a propellant. This process of rapid burning… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”