Anisotropic filtering

In 3D computer graphics, anisotropic filtering (abbreviated AF) is a method of enhancing the image quality of textures on surfaces that are at oblique viewing angles with respect to the camera where the projection of the texture (not the polygon or other primitive on which it is rendered) appears to be non-orthogonal. Like bilinear and trilinear filtering it eliminates aliasing effects, but introduces less blur at extreme viewing angles and thus preserves more detail. Anisotropic filtering is relatively expensive (usually computationally, though the standard space-time tradeoff rules apply) and only became a standard feature of consumer-level graphics cards in the 1990s. Anisotropic filtering is now common in modern graphics hardware and is enabled either by users through driver settings or by graphics applications and video games through programming interfaces.

An improvement on isotropic MIP mapping

Hereafter, it is assumed the reader is familiar with MIP mapping.

If we were to explore a more approximate anisotropic algorithm, RIP mapping (rectim in parvo) as an extension from MIP mapping, we can understand how anisotropic filtering gains so much texture mapping quality. If we need to texture a horizontal plane which is at an oblique angle to the camera, traditional MIP map minification would give us insufficient horizontal resolution due to the reduction of image frequency in the vertical axis. This is because in MIP mapping each MIP level is isotropic, so a 256 × 256 texture is downsized to a 128 × 128 image, then a 64 × 64 image and so on, so resolution halves on each axis simultaneously, so a MIP map texture probe to an image will always sample an image that is of equal frequency in each axis. Thus, when sampling to avoid aliasing on a high-frequency axis, the other texture axes will be similarly downsampled and therefore potentially blurred.

With RIP map anisotropic filtering, in addition to downsampling to 128 × 128, images are also sampled to 256 × 128 and 32 × 128 etc. These anisotropically downsampled images can be probed when the texture-mapped image frequency is different for each texture axis and therefore one axis need not blur due to the screen frequency of another axis and aliasing is still avoided. RIP mapping has a limitation in that it only supports anisotropic probes that are axis-aligned in texture space, so diagonal anisotropy still presents a problem even though real-use cases of anisotropic texture commonly have such screenspace mappings.

Degree of anisotropy supported

Different degrees or ratios of anisotropic filtering can be applied during rendering and current hardware rendering implementations set an upper bound on this ratio. This degree refers to the maximum ratio of anisotropy supported by the filtering process. So, for example 4:1 (pronounced 4 to 1) anisotropic filtering will continue to sharpen more oblique textures beyond the range sharpened by 2:1. In practice what this means is that in highly oblique texturing situations a 4:1 filter will be twice as sharp as a 2:1 filter (it will display frequencies double that of the 2:1 filter). However, most of the scene will not require the 4:1 filter; only the more oblique and usually more distant pixels will require the sharper filtering. This means that as the degree of anisotropic filtering continues to double there are diminishing returns in terms of visible quality with fewer and fewer rendered pixels affected, and the results become less obvious to the viewer. When one compares the rendered results of an 8:1 anisotropically filtered scene to a 16:1 filtered scene, only a relatively few highly oblique pixels, mostly on more distant geometry, will display visibly sharper textures, and they are also sharpened to a lesser degree in the 8:1 filtered scene, so the frequency information on these few pixels will only be double that of the 8:1 filter. The performance penalty also diminishes because fewer pixels require the data fetches of greater anisotropy. In the end it is the additional hardware complexity vs. these diminishing returns, which causes an upper bound to be set on the anisotropic quality in a hardware design. Applications and users are then free to adjust this trade-off through driver and software settings up to this threshold.

Implementation

True anisotropic filtering probes the texture anisotropically on the fly on a per-pixel basis for any orientation of anisotropy. In graphics hardware, typically when the texture is sampled anisotropically, several probes (texel samples) of the texture around the center point are taken, but on a sample pattern mapped according to the projected shape of the texture at that pixel. Each probe is often in itself a filtered MIP map sample, which adds more sampling to the process. Sixteen trilinear anisotropic samples might require 128 samples from the stored texture, as trilinear MIP map filtering needs to take four samples times two MIP levels and then anisotropic sampling (at 16-tap) needs to take sixteen of these trilinear filtered probes.

Performance and optimization

The sample count required can make anisotropic filtering extremely bandwidth-intensive. Multiple textures are common; each texture sample could be four bytes or more, so each anisotropic pixel could require 512 bytes from texture memory, although texture compression is commonly used to reduce this. A display can easily contain over a million pixels, and the desired frame rate tends to be as high as 30–60 frames per second or more, so the texture memory bandwidth can get very high (tens to hundreds of gigabytes per second) very quickly. Fortunately, several factors mitigate in favor of better performance. The probes themselves share cached texture samples, both inter- and intra-pixel. Even with 16-tap anisotropic filtering, not all 16 taps are always needed, because only distant highly oblique pixel fill tends to be highly anisotropic, and such fill tends to cover small regions of the screen, and finally magnification texture filters require no anisotropic filtering.

ee also

*Bilinear filtering
*Trilinear filtering
*Anti-aliasing

External links

* [http://www.garry.tv/img/cssource/texture-filtering.jpgSide-by-side comparison of trilinear and anisotropic filtering]
* [http://www.extremetech.com/article2/0,1558,1152380,00.asp The Naked Truth About Anisotropic Filtering]