Orthographic projection (cartography)

Orthographic projection (cartography)
Orthographic projection (equatorial aspect) of eastern hemisphere 30W–150E

An orthographic projection is a map projection of cartography. Like the stereographic projection and gnomonic projection, orthographic projection is a perspective (or azimuthal) projection, in which the sphere is projected onto a tangent plane or secant plane. The point of perspective for the orthographic projection is at infinite distance. It depicts a hemisphere of the globe as it appears from outer space, where the horizon is a great circle. The shapes and areas are distorted, particularly near the edges, but distances are preserved along parallels.[1][2]

Contents

History

The orthographic projection has been known since antiquity, with its cartographic uses being well documented. Hipparchus used the projection in the 2nd century B.C. to determine the places of star-rise and star-set. In about 14 B.C., Roman engineer Marcus Vitruvius Pollio used the projection to construct sundials and to compute sun positions.[2]

Vitruvius also seems to have devised the term orthographic (from the Greek orthos (= “straight”) and graphē (= “drawing”) for the projection. However, the name analemma, which also meant a sundial showing latitude and longitude, was the common name until François d'Aguilon of Antwerp promoted its present name in 1613.[2]

The earliest surviving maps on the projection appear as woodcut drawings of terrestrial globes of 1509 (anonymous), 1533 and 1551 (Johannes Schöner), and 1524 and 1551 (Apian). These were crude. A highly refined map designed by Renaissance polymath Albrecht Dürer and executed by Johannes Stabius appeared in 1515.[2]

Photographs of the Earth and other planets from spacecraft have inspired renewed interest in the orthographic projection in astronomy and planetary science.

Mathematics

The formulas for the spherical orthographic projection are derived using trigonometry. They are written in terms of longitude (λ) and latitude (φ) on the sphere. Define the radius of the sphere R and the center point (and origin) of the projection (λ0, φ0). The equations for the orthographic projection onto the (x, y) tangent plane reduce to the following:[1]

\begin{align}
x &= R\,\cos\varphi \sin\left(\lambda - \lambda_0\right) \\
y &= R\big[\cos\varphi_0 \sin\varphi - \sin\varphi_0 \cos\varphi \cos\left(\lambda - \lambda_0\right)\big]
\end{align}

Latitudes beyond the range of the map should be clipped by calculating the distance c from the center of the orthographic projection. This ensures that points on the opposite hemisphere are not plotted:

\cos c = \sin\varphi_0 \sin\varphi + \cos\varphi_0 \cos\varphi \cos\left(\lambda - \lambda_0\right)\,.

The point should be clipped from the map if cos(c) is negative.

The inverse formulas are given by:

\begin{align}
\varphi &= \arcsin\left[\cos c \sin\varphi_0 + \frac{y\sin c \cos\varphi_0}{\rho}\right] \\
\lambda &= \lambda_0 + \arctan\left[\frac{x\sin c}{\rho \cos \varphi_0\cos c - y \sin\varphi_0 \sin c}\right]
\end{align}

where

\begin{align}
\rho &= \sqrt{x^2 + y^2} \\
   c &= \arcsin\left(\frac{\rho}{R}\right)
\end{align}

For computation of the inverse formulas (e.g., using C/C++, Fortran, or other programming language), the use of the two-argument atan2 form of the inverse tangent function (as opposed to atan) is recommended. This ensures that the sign of the orthographic projection as written is correct in all quadrants.

The inverse formulas are particularly useful when trying to project a variable defined on a (λ, φ) grid onto a rectilinear grid in (x, y). Direct application of the orthographic projection yields scattered points in (x, y), which creates problems for plotting and numerical integration. One solution is to start from the (x, y) projection plane and construct the image from the values defined in (λ, φ) by using the inverse formulas of the orthographic projection.

See References for an ellipsoidal version of the orthographic map projection.[3]

Orthographic projections onto cylinders

In a wide sense, all projections with the point of perspective at infinity (and therefore parallel projecting lines) are considered as orthographic, regardless of the surface onto which they are projected. These kinds of projections distort angles and areas close to the poles.

An example of an orthographic projection onto a cylinder is the Lambert cylindrical equal-area projection.

See also

References

  1. ^ a b Snyder, J. P. (1987). Map Projections—A Working Manual (US Geologic Survey Professional Paper 1395). Washington, D.C.: US Government Printing Office. pp. 145–153. 
  2. ^ a b c d Snyder, John P. (1993). Flattening the Earth: Two Thousand Years of Map Projections pp. 16–18. Chicago and London: The University of Chicago Press. ISBN 0-226-76746-9.
  3. ^ Zinn, Noel (June 2011). "Ellipsoidal Orthographic Projection via ECEF and Topocentric (ENU)". http://www.hydrometronics.com/downloads/Ellipsoidal%20Orthographic%20Projection.pdf. Retrieved 2011-Nov-11. 

External links


Wikimedia Foundation. 2010.

Игры ⚽ Поможем написать курсовую

Look at other dictionaries:

  • Orthographic projection — Part of a series on …   Wikipedia

  • Multiview orthographic projection — Part of a series on …   Wikipedia

  • Projection orthographique — équatoriale de l hémisphère 30° ouest–150° est Une projection orthographique est un type de projection cartographique. C est, comme une projection stéréographique et une projection gnomonique, une projection de perspective par laquelle une sphère …   Wikipédia en Français

  • Orthographic — may refer to: Orthographic projection Orthographic projection (geometry) Orthographic projection (cartography) Orthography (written language) This disambiguation page lists articles associated with the same title. If an …   Wikipedia

  • Gall-Peters projection — The Gall Peters projection is one specialization of a configurable equal area map projection known as the equal area cylindric or cylindric equal area projection. The Gall Peters achieved considerable notoriety in the late 20th century as the… …   Wikipedia

  • Map projection — A medieval depiction of the Ecumene (1482, Johannes Schnitzer, engraver), constructed after the coordinates in Ptolemy s Geography and using his second map projection A map projection is any method of representing the surface of a sphere or other …   Wikipedia

  • Oblique projection — This article discusses imaging of three dimensional objects. For an abstract mathematical discussion, see Projection (linear algebra) …   Wikipedia

  • Axonometric projection — For axonometric projection in video games, see Video games with isometric graphics …   Wikipedia

  • General Perspective projection — The General Perspective Projection is a map projection of cartography. When the Earth is photographed from space, the camera records the view as a perspective projection. If the camera precisely faces the center of the Earth, the projection is… …   Wikipedia

  • Cylindrical equal-area projection — of the world; standard parallel at 40°N …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”