Mixing (process engineering)

Mixing (process engineering)

In industrial process engineering, mixing is a unit operation that involves manipulating a heterogeneous physical system, with the intent to make it more homogeneous. Familiar examples include pumping of the water in a swimming pool to homogenize the water temperature, and the stirring of pancake batter to eliminate lumps.

agitating vessel

Contents

Solids mixing

Blending powders is one of the oldest unit-operations in the solids handling industries. For many decades powder blending has been used just to homogenise bulk materials. Many different machines have been designed in order to be able to handle materials with various bulk solids properties. On the basis of the practical experience gained with these different machines, engineering knowledge has been developed to construct reliable equipment and to predict scale-up and mixing behaviour. Nowadays the same mixing technologies are used for many more applications: to improve product quality, to coat particles, to fuse materials, to wet, to dispers in liquid, to agglomerate, to alter functional material properties, etc. This wide range of applications of mixing equipment requires a high level of knowledge, long time experience and extended test facilities in order to come to the optimal selection of equipment and processes.

Mixing mechanisms

In powder mixing two different dimensions in the mixing process can be determined: convective mixing and intensive mixing. In the case of convective mixing material in the mixer is transported from one location to another. This type of mixing process will lead to a less ordered state inside the mixer, the components which have to be mixed will be distributed over the other components. With progressing time the mixture will become more and more randomly ordered. After a certain mixing time the ultimate random state is reached. Usually this type of mixing is applied for free-flowing and coarse materials. Possible threat during macro mixing is the de-mixing of the components, since differences in size, shape or density of the different particles can lead to segregation. In the convective mixing range, Hosokawa has several processes available from silo mixers to horizontal mixers and conical mixers. When materials are cohesive, which is the case with e.g. fine particles and also with wet material, convective mixing is no longer sufficient to obtain a randomly ordered mixture. The relative strong inter-particle forces will form lumps, which are not broken up by the mild transportation forces in the convective mixer. In order to decrease the lump size additional forces are necessary; i.e. more energy intensive mixing is required. These additional forces can either be impact forces or shear forces.

Mixing Calculations

The level of mixing is determined by the pumping effect or dynamic response that the mixer imparts into the fluid. When a mixing impeller rotates in the fluid, it generates a combination of flow and shear. The impeller generated flow can be calculated by using the following equation:

Flow = (Flow_Number * RPM * Impeller_Diameter^3) / 231

Output is in Gallons / Minute


Flow numbers for impellers have been published by the North American Mixing Forum, Post Mixing, and Fusion Fluid Equipment.

An online mixing calculator is available http://www.fusionfluid.com/html/Knowledge-MixingCalculator.html


Laboratory mixing

A magnetic stirrer

At a laboratory scale, mixing is achieved by magnetic stirrers or by simple hand-shaking.

Industrial mixing

Schematics of an agitated vessel

At an industrial scale, efficient mixing can be difficult to achieve. A great deal of engineering effort goes into designing and improving mixing processes. Mixing at industrial scale is done in batches (dynamic mixing) or with help of static mixers.

Typical example of a mixing process in the industry is concrete mixing, where cement, sand, small stones or gravel and water are commingled to a homogeneous self-hardening mass, used in the construction industry. Another classical mixing process is mulling foundry molding sand, where sand, bentonite clay, fine coal dust and water are mixed to a plastic, moldable and reusable mass, applied for molding and pouring molten metal to obtain sand castings that are metallic parts for automobile, machine building, construction or other industries.

The opposite of mixing is segregation. A classical example of segregation is the brazil nut effect.

See also


Wikimedia Foundation. 2010.

Игры ⚽ Нужно решить контрольную?

Look at other dictionaries:

  • Micro process engineering — is the science of conducting chemical or physical processes (unit operations) inside small volumina, typically inside channels with diameters of less than 1 mm (microchannels) or other structures with sub millimeter dimensions. These… …   Wikipedia

  • Mixing console — In professional audio, a mixing console, or audio mixer, also called a sound board, mixing desk, or mixer is an electronic device for combining (also called mixing ), routing, and changing the level, timbre and/or dynamics of audio signals. A… …   Wikipedia

  • Process control — is a statistics and engineering discipline that deals with architectures, mechanisms, and algorithms for controlling the output of a specific process. See also control theory.For example, heating up the temperature in a room is a process that has …   Wikipedia

  • Mixing engineer — A mix engineer is the person responsible for incorporating all the different recorded elements of music (vocals, instruments, effects etc.)to make the final version of a song. These mixing professionals have many years of experience and training… …   Wikipedia

  • Engineering drawing — Technical drawings An engineering drawing, a type of technical drawing, is used to fully and clearly define requirements for engineered items. Engineering drawing (the activity) produces engineering drawings (the documents). More than just the… …   Wikipedia

  • Engineering Projects — ▪ 1995 Introduction BRIDGES        Notable Engineering Projects(For Notable Engineering Projects in work, see Table (Notable Engineering Projects).)       As the decade of the 1990s reached its midpoint, the limits to bridge design were being… …   Universalium

  • chemical engineering — chemical engineer. the science or profession of applying chemistry to industrial processes. [1900 05] * * * Academic discipline and industrial activity concerned with developing processes and designing and operating plants to change materials… …   Universalium

  • Chemical process — Part of Chemical engineering History Concepts Unit operations Unit processes Chemical engineer Chemical process Process integration Un …   Wikipedia

  • Fiberglass spray lay-up process — is similar to the hand lay up process. The difference comes from the application of the fiber and resin material to the mold. Spray up is an open molding composites fabrication process where resin and reinforcements are sprayed onto a reusable… …   Wikipedia

  • Ceramic engineering — Simulation of the outside of the Space Shuttle as it heats up to over 1,500 °C (2,730 °F) during re entry into the Earth s atmosphere Ceramic engineering is the science and technology of creating objects from inorganic, non metallic… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”