Medical radiography

Medical radiography
Medical radiography
Diagnostics
ICD-10-PCS B?0, B?1, B?2
ICD-9-CM 87, 88.0-88.6
MeSH D011859
OPS-301 code 3-10...3-13, 3-20...3-26

Radiography is the use of ionizing electromagnetic radiation such as X-rays to view objects. Although not technically radiographic techniques, imaging modalities such as PET and MRI are sometimes grouped in radiography because the radiology department of hospitals handle all forms of imaging. Treatment using radiation is known as radiotherapy.

Contents

History

Radiography started in 1895 with the discovery of X-rays (later also called Röntgen rays after the man who first described their properties in rigorous detail), a type of electromagnetic radiation. Soon these found various applications, from helping to find shoes that fit, to the more lasting medical uses. X-rays were put to diagnostic use very early, before the dangers of ionising radiation were discovered. Initially, many groups of staff conducted radiography in hospitals, including physicists, photographers, doctors, nurses, and engineers. The medical speciality of radiology grew up around the new technology, and this lasted many years. When new diagnostic tests involving X-rays were developed, it was natural for the radiographers to be trained and adopt this new technology. This happened first with fluoroscopy, computed tomography (1960s), and mammography. Ultrasound (1970s) and magnetic resonance imaging (1980s) was added to the list of skills used by radiographers because they are also medical imaging, but these disciplines do not use ionising radiation or X-rays. Although a nonspecialist dictionary might define radiography quite narrowly as "taking X-ray images", this has only been part of the work of an "X-ray department", radiographers, and radiologists for a very long time. X-rays are also exploited by industrial radiographers in the field of nondestructive testing, where the newer technology of ultrasound is also used.

Diagnostic radiography

Diagnostic radiography involves the use of both ionising radiation and non-ionising radiation to create images for medical diagnoses. The predominant test is still the X-ray (the word X-ray is often used for both the test and the actual film or digital image). X-rays are the second most commonly used medical tests, after laboratory tests. This application is known as diagnostic radiography. Since the body is made up of various substances with differing densities, X-rays can be used to reveal the internal structure of the body on film by highlighting these differences using attenuation, or the absorption of X-ray photons by the denser substances (like calcium-rich bones). Medical diagnostic radiography is undertaken by a specially trained professional called a diagnostic radiographer in the UK, or a radiologic technologist in the USA.

There are several sub-specialities:

Projection radiography

For the main article see Projectional Radiography

The creation of images by exposing an object to X-rays or other high-energy forms of electromagnetic radiation and capturing the resulting remnant beam (or "shadow") as a latent image is known as "projection radiography." The "shadow" may be converted to light using a fluorescent screen, which is then captured on photographic film, it may be captured by a phosphor screen to be "read" later by a laser (CR), or it may directly activate a matrix of solid-state detectors (DR—similar to a very large version of a CCD in a digital camera). Bone and some organs (such as lungs) especially lend themselves to projection radiography. It is a relatively low-cost investigation with a high diagnostic yield.

Projection radiography uses X-rays in different amounts and strengths depending on what body part is being imaged:

  • Hard tissues such as bone require a relatively high energy photon source, and typically a tungsten anode is used with a high voltage (50-150 kVp) on a 3-phase or high-frequency machine to generate braking radiation. Bony tissue and metals are denser than the surrounding tissue, and thus by absorbing more of the X-ray photons they prevent the film from getting exposed as much. Wherever dense tissue absorbs or stops the X-rays, the resulting X-ray film is unexposed, and appears translucent blue, whereas the black parts of the film represent lower-density tissues such as fat, skin, and internal organs, which could not stop the X-rays. This is usually used to see bony fractures, foreign objects (such as ingested coins), and used for finding bony pathology such as osteoarthritis, infection (osteomyelitis), cancer (osteosarcoma), as well as growth studies (leg length, achondroplasia, scoliosis, etc.).
  • Soft tissues are seen with the same machine as for hard tissues, but a "softer" or less-penetrating X-ray beam is used. Tissues commonly imaged include the lungs and heart shadow in a chest X-ray, the air pattern of the bowel in abdominal X-rays, the soft tissues of the neck, the orbits by a skull X-ray before an MRI to check for radiopaque foreign bodies (especially metal), and of course the soft tissue shadows in X-rays of bony injuries are looked at by the radiologist for signs of hidden trauma (for example, the famous "fat pad" sign on a fractured elbow).
  • Dental radiography uses a small radiation dose with high penetration to view teeth, which are relatively dense. A dentist may examine a painful tooth and gum using X-ray equipment. The machines used are typically single-phase pulsating DC, the oldest and simplest sort. Dental technicians or the dentist may run these machines—radiologic technologists are not required by law to be present.
  • Mammography is an X-ray examination of breasts and other soft tissues. This has been used mostly on women to screen for breast cancer, but is also used to view male breasts, and used in conjunction with a radiologist or a surgeon to localise suspicious tissues before a biopsy or a lumpectomy. Breast implants designed to enlarge the breasts reduce the viewing ability of mammography, and require more time for imaging as more views need to be taken. This is because the material used in the implant is very dense compared to breast tissue, and looks white (clear) on the film. The radiation used for mammography tends to be softer (has a lower photon energy) than that used for the harder tissues. Often a tube with a molybdenum anode is used with about 30 000 volts (30 kV), giving a range of X-ray energies of about 15-30 keV. Many of these photons are "characteristic radiation" of a specific energy determined by the atomic structure of the target material (Mo-K radiation).

Other modalities are used in radiography when traditional projection X-ray cannot image what doctors want to see. Below are other modalities included within radiography; they are only summaries and more specific information can be viewed by going to their individual pages:

Fluoroscopy (angiography, gastro-intestinal fluroscopy)

For main article see X-ray image intensifier and Contrast medium

Fluoroscopy is a term invented by Thomas Edison during his early X-ray studies. The name refers to the fluorescence he saw while looking at a glowing plate bombarded with X-rays.

This is a technique that provides moving projection radiographs of lower quality. Fluoroscopy is mainly performed to view movement (of tissue or a contrast agent), or to guide a medical intervention, such as angioplasty, pacemaker insertion, or joint repair/replacement. The latter are often carried out in the operating theatre, using a portable fluoroscopy machine called a C-arm. It can move around the surgery table and make digital images for the surgeon.

Angiography is the use of fluoroscopy to view the cardiovascular system. An iodine-based contrast is injected into the bloodstream and watched as it travels around. Since liquid blood and the vessels are not very dense, a contrast with high density (like the large iodine atoms) is used to view the vessels under X-ray. Angiography is used to find aneurysms, leaks, blockages (thromboses), new vessel growth, and placement of catheters and stents. Balloon angioplasty is often done with angiography.

Fluoroscopy can be used to examine the digestive system using a substance which is opaque to X-rays, (usually barium sulfate or gastrografin), which is introduced into the digestive system either by swallowing or as an enema. This is normally as part of a double contrast technique, using positive and negative contrast. Barium sulfate coats the walls of the digestive tract (positive contrast), which allows the shape of the digestive tract to be outlined as white or clear on an X-ray. Air may then be introduced (negative contrast), which looks black on the film. The barium meal is an example of a contrast agent swallowed to examine the upper digestive tract. Note that while soluble barium compounds are very toxic, the insoluble barium sulfate is non-toxic because its low solubility prevents the body from absorbing it.

Most modern injected radiographic positive contrast media are iodine-based. Patients who suffer from allergy to shellfish may be allergic to iodine, and should consult their physician regarding pre-medication to lessen risk of allergic reaction. Iodinated contrast comes in two forms: ionic and non-ionic compounds. Non-ionic contrast is significantly more expensive than ionic (approximately three to five times the cost), however, non-ionic contrast tends to be safer for the patient, causing fewer allergic reactions and uncomfortable side effects such as hot sensations or flushing. Most imaging centers now use non-ionic contrast exclusively, finding that the benefits to patients outweigh the expense.

  • Negative radiographic contrast agents are air and carbon dioxide (CO2). The latter is easily absorbed by the body and causes less spasm. It can also be injected into the blood, where air absolutely cannot.

Dual energy X-ray absorptiometry

DEXA, or bone densitometry, is used primarily for osteoporosis tests. It is not projection radiography, as the X-rays are emitted in 2 narrow beams that are scanned across the patient, 90 degrees from each other. Usually the hip (head of the femur), lower back (lumbar spine) or heel (calcaneum) are imaged, and the bone density (amount of calcium) is determined and given a number (a T-score). It is not used for bone imaging, as the image quality is not good enough to make an accurate diagnostic image for fractures, inflammation etc. It can also be used to measure total body fat, though this isn't common. The radiation dose received from DEXA scans is very low, much lower than projection radiography examinations.

Computed tomography

Computed tomography or CT scan (previously known as CAT scan, the "A" standing for "axial") uses a high amount of ionizing radiation (in the form of X-rays) in conjunction with a computer to create images of both soft and hard tissues. These images look as though the patient was sliced like bread (thus, "tomography"-- "tomo" means "slice"). The machine looks similar to an MRI machine to many patients, but is not related. The exams are generally short, most lasting only as long as a breath-hold. Contrast agents are often used, depending on the tissues needing to be seen. Radiographers perform these examinations, sometimes in conjunction with a radiologist (for instance, when a radiologist performs a CT-guided biopsy).

Technical considerations

X-ray photons are formed in events involving electrons and are the mainly form of ionizing electromagnetic radiation used in medical radiography. This radiation is much more energetic than the more familiar types such as radio waves and visible light. Proper production and detection of photons are important in the creation of good radiograms.

Photon production

X-ray radiation for medical imaging is typically produced by X-ray tubes, which operate through bombarding the anode with high energy electrons emitted from a hot cathode. Image sharpness, contrast, and patient dosage are important considerations in medical radiography and these requirements determined the desired energies of the tube, the type of material used on the anode, and the method in which the power is generated to drive the tube. Although the technical definition of x-rays range from 1-700 keV, medical x-rays typically use 5-150 keV x-rays. The photons emitted come in discrete bands of energy corresponding to the material of the anode, and the undesired bands are removed. Choice of the anode and its emitted radiation energies depends on the application and the tissues being imaged, for instance molybdenum is often used in mammography because of its 20 keV x-rays. Too high radiation energies will result in poor pictures since the radiation cannot be readily attenuated, however too low energies will increase the radiation dosage of the patient without improvements in image quality.

Sharpness of a radiographic image is strongly determined by the size of the x-ray source. This is determined by the area of the electron beam hitting the anode. A large photon source results in more blurring in the final image and is worsened by an increase in image formation distance. This blurring can be measured as a contribution to the modulation transfer function of the imaging system.

Power generation

The power used by the x-ray tube is generated by a specialized generator, which supplies the voltage and current required to drive the tube. The generator needs to supply high voltages with small exposure times. An exposure thus can be described by two factors:

  1. The peak voltage of the cathode to anode
  2. The milliamprere seconds exposure time

These variables can be controlled by the operator but are more typically assigned automatically by the x-ray machinery through sampling the emitted radiation. Power generators convert standard 120 or 220 volt AC to higher DC voltages and typically employ rectified and filtered multiphase transformers which maintain a constant voltage and can be turn rapidly on and off for millisecond exposures.

Photon detection

Photons images that have been shadowed from an imaging subject must be detected at high fidelity and resolution to allow for diagnosis. There are three main types of image detection methods used namely: film/screens, image intensifiers, and digital detectors, with the latter fast becoming the standard for x-ray image detection. The ability of an x-ray detector to produce high-quality images is determined largely by the modulation transfer function (MTF) and detective quantum efficiency (DQE) of the system.

Film/Screens

X-ray film is almost always used in conjunction with x-ray sensitive screen because high resolution film is quite poor at detecting x-rays. These screens contain rare earth minerals and phosphor materials thatconvert x-ray radiation to visible light or lows EM energies to which the film is sensitive. Screen generally have to have good contrast, dynamic range, and resolution, with the former two factors being competing properties. The resolution of the screen also affects the sensitivity of the detectors since more sensitive screens are generally thicken, which causes the more blurring because of spreading light.

The film speed also play a factor in image quality. Higher speeds are more sensitive to photons but are generally lower in resolution and more susceptible to noise. Lower speed films produce images of good resolution and dynamic range but requires more photons for exposure and increases the radiation dosage of the subject.

Image intensifiers and array detectors

Image intensifiers are analog devices that readily convert the acquired x-ray image into one visible on a video screen. This device is made of a vacuum tube with a wide input surface coated on the inside with caesium iodide (CsI). When hit by x-rays material phosphors which causes the photocathode adjacent to it to emit electrons. These electron are then focus using electron lenses inside the intensifier to an output screen coated with phosphorescent materials. The image from the output can then be recorded via a camera and displayed.

Digital devices known an array detectors are becoming more common in fluoroscopy. These devices are made of discrete pixelated detectors known as TFTs which can either work indirectly by using photo detectors that detect light emitted from a scintillator material such as CsI, or directly by capturing the electrons produced when the x-rays hit the detector. Direct detector do not tend to experience the blurring or spreading effect caused by phosphorescent scintillators of or film screens since the detectors are activated directly by x-ray photons.

Obsolete terminology

The term skiagrapher was used until about 1918 to mean radiographer.

The word was derived from Ancient Greek words for 'shadow' and 'writer'.[1]

References

  1. ^ The Electrical world. Electrical World.. 1896. pp. 372–. http://books.google.com/books?id=yglRAAAAYAAJ&pg=PA372. Retrieved 27 June 2011. 

External links


Wikimedia Foundation. 2010.

Игры ⚽ Поможем решить контрольную работу

Look at other dictionaries:

  • Medical test — Intervention X ray of a hand. X rays are a common medical test. MeSH …   Wikipedia

  • Radiography — For medical radiography see: RadiologyRadiography is the use of X rays to view unseen or hard to image objects. The main diagnostic purposes of X rays are to see inside ones body, especially of the brain and fetus, where the bones can be viewed… …   Wikipedia

  • Medical imaging — This article is about imaging techniques and modalities for the human body. For imaging of animals in research, see Preclinical imaging. Medical imaging Diagnostics A CT scan image showing a ruptured abdominal aortic aneurysm …   Wikipedia

  • Medical ultrasonography — This article is about using ultrasound to image the human body. For imaging of animals in research, see Preclinical imaging. Sonography redirects here. For the tactile alphabet called sonography , see Night writing. Medical ultrasonography… …   Wikipedia

  • Medical software — Logo, by Harry Gouvas In computers, medical software is a significant branch of software engineering. Many medical devices that monitor or control patients are predominantly controlled by software. Medical devices are frequently regulated and… …   Wikipedia

  • Medical transcription — Medical transcription, also known as MT, is an allied health profession, which deals in the process of transcription, or converting voice recorded reports as dictated by physicians and/or other healthcare professionals, into text format. Contents …   Wikipedia

  • Medical billing (United States) — Medical billing Coding is the process of submitting and following up on claims to insurance companies in order to receive payment for services rendered by a healthcare provider. The same process is used for most insurance companies, whether they… …   Wikipedia

  • Medical Education and Training Campus — Model aerial view Active 2005 Country …   Wikipedia

  • Medical laboratory scientist — MLS in his work environment. A Medical Laboratory Scientist (MLS) (also referred to as medical technologist or clinical laboratory technologist) is a healthcare professional who performs chemical, hematological, immunologic, microscopic, and… …   Wikipedia

  • Medical procedure — A medical procedure is a course of action intended to achieve a result in the care of persons with health problems. A medical procedure with the intention of determining, measuring or diagnosing a patient condition or parameter is also called a… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”