Traffic Collision Avoidance System

Traffic Collision Avoidance System

The Traffic alert and Collision Avoidance System (or TCAS) is an aircraft collision avoidance system designed to reduce the incidence of mid-air collisions between aircraft. It monitors the airspace around an aircraft for other aircraft equipped with a corresponding active transponder, independent of air traffic control, and warns pilots of the presence of other transponder-equipped aircraft which may present a threat of mid-air collision (MAC). It is an implementation of the Airborne Collision Avoidance System mandated by International Civil Aviation Organization to be fitted to all aircraft over 5700 kg or authorised to carry more than 19 passengers.

Official definition from PANS-ATM (Nov 2007):ACAS / TCAS is an aircraft system based on secondary surveillance radar (SSR) transponder signals which operates independently of ground-based equipment to provide advice to the pilot on potential conflicting aircraft that are equipped with SSR transponders.

In modern glass cockpit aircraft, the TCAS display may be integrated in the Navigation Display (ND); in older glass cockpit aircraft and those with mechanical instrumentation, such an integrated TCAS display may replace the mechanical Instantaneous Vertical Speed Indicator (which indicates the rate with which the aircraft is descending or climbing).

Impetus for a collision prevention system

Research into collision avoidance systems has been ongoing since at least the 1950s. Authorities such as the Federal Aviation Administration were spurred into action after several major mid-air collisions involving great loss of life. Some of these mid-air accidents include:
* Grand Canyon midair collision in 1956;
* The Zagreb mid-air collision in 1976;
* PSA Flight 182, a Boeing 727 which collided with a Cessna 172 in 1978;
* Aeroméxico Flight 498, a 1986 collision similar to PSA Flight 182, which finally spurred the US Congress and other regulatory bodies into action and led to mandatory collision avoidance equipment.

TCAS basics

TCAS involves communication between all aircraft equipped with an appropriate transponder (provided the transponder is enabled and set up properly). Each TCAS-equipped aircraft "interrogates" all other aircraft in a determined range about their position (via the 1030 MHz radio frequency), and all other craft reply to other interrogations (via 1090 MHz). This interrogation-and-response cycle may occur several times per second.

Through this constant back-and-forth communication, the TCAS system builds a three dimensional map of aircraft in the airspace, incorporating their bearing, altitude and range. Then, by extrapolating current range and altitude difference to anticipated future values, it determines if a potential collision threat exists.

TCAS and its variants are only able to interact with aircraft that have a correctly operating transponder. A unique 24-bit identifier is assigned to each aircraft upon manufacture and is entered into the transponder. These identifiers can be decoded online using tools such as those at [http://www.airframes.org/ Airframes.org] .

The next step beyond identifying potential collisions is automatically negotiating a mutual avoidance maneuver (currently, maneuvers are restricted to changes in altitude and modification of climb/sink rates) between the two (or more) conflicting aircraft. These avoidance maneuvers are communicated to the flight crew by a cockpit display and by synthesized voice instructions.

afety aspects of TCAS

Safety studies on TCAS estimate that the system improves safety in the airspace by a factor of between 3 and 5.

However, it is well understood that part of the remaining risk is that TCAS may induce midair collisions: "In particular, it is dependent on the accuracy of the threat aircraft’s reported altitude and on the expectation that the threat aircraft will not make an abrupt maneuver that defeats the TCAS RA. The safety study also shows that TCAS II will induce some critical near midair collisions..." (See page 7 of Introduction to TCAS II Version 7 (PDF) in external links below).

One potential problem with TCAS II is the possibility that a recommended avoidance maneuver might direct the flight crew to descend toward terrain below a safe altitude. Recent requirements for incorporation of ground proximity mitigate this risk. Ground proximity warning alerts have priority in the cockpit over TCAS alerts.

Some pilots have been unsure how to act when their aircraft was requested to climb whilst flying at their maximum altitude. The accepted procedure is to follow the climb RA as best as possible, temporarily trading speed for height. The climb RA should quickly finish. In the event of a stall warning, the stall warning would take priority.

Relationship to Automatic Dependent Surveillance (ADS)

Automatic Dependent Surveillance-Broadcast (ADS-B) messages are transmitted from aircraft equipped with suitable transponders, containing information such as identity, location, and velocity. The signals are broadcast on the 1090 MHz radio frequency. ADS-B messages are also carried on a Universal Access Transceiver (UAT) in the 900 MHz band.

TCAS equipment which is capable of processing ADS-B messages may use this information to enhance the performance of TCAS, using techniques known as "hybrid surveillance". As currently implemented, hybrid surveillance uses reception of ADS-B messages from an aircraft to reduce the rate at which the TCAS equipment interrogates that aircraft. This reduction in interrogations reduces the use of the 1030/1090 MHz radio channel, and will over time extend the operationally useful life of TCAS technology. The ADS-B messages will also allow low cost (for aircraft) technology to provide real time traffic in the cockpit for small aircraft. Currently UAT based traffic uplinks are provided in Alaska and in regions of the East coast of the USA.

Hybrid surveillance does not include the use any of the aircraft flight information in the TCAS conflict detection algorithms; ADS-B is used only to identify aircraft that can safely be interrogated at a lower rate.

In the future, prediction capabilities may be improved by using the state vector information present in ADS-B messages. Also, since ADS-B messages can be received at greater range than TCAS normally operates, aircraft can be acquired earlier by the TCAS tracking algorithms.

The identity information present in ADS-B messages can be used to label other aircraft on the cockpit display (where present), improving situational awareness.

Drawbacks to TCAS and ADS-B

The major demonstrated problem of the ADS-B protocol integration is this added verbosity of the extra information transmitted, which is considered unnecessary for collision avoidance purposes. The more data transmitted from one aircraft in accordance with the system design, the lesser the number of aircraft that can participate in the system, due to the fixed and limited channel data bandwidth (1 megabit/second with the 26/64 data bits to packet length bit capacity of the Mode S downlink data format packet). For every Mode S message of 64 bits, the overhead demands 8 for clock sync at the receiver and Mode S packet discovery, 6 for type of Mode S packet, 24 for who it came from. Since that leaves only 26 for information, multiple packets must be used to convey a single message. The ADS-B "fix" proposal is to go to a 128 bit packet, which is not an accepted international standard. Either approach increases channel traffic above the level sustainable for environments such as the Los Angeles Basin.Fact|date=July 2007

Versions of TCAS

PASSIVE

Collision Avoidance systems which rely on transponder replies triggered by ground and airborne systems are considered passive. Ground and airborne interrogators query nearby transponders for mode C altitude information, which can be monitored by third-party systems for traffic information. Passive systems display traffic similar to TCAS, however generally have a range of less than convert|7|nmi|km. Portable Collision Avoidance System.

TCAS I

TCAS I is the first generation of collision avoidance technology. It is cheaper but less capable than the modern TCAS II system, and is mainly intended for general aviation use. TCAS I systems are able to monitor the traffic situation around a plane (to a range of about 40 miles) and offer information on the approximate bearing and altitude of other aircraft. It can also generate collision warnings in the form of a "Traffic Advisory" (TA). The TA warns the pilot that another aircraft is in near vicinity, announcing "traffic, traffic", but does not offer any suggested remedy; it is up to the pilot to decide what to do, usually with the assistance of Air Traffic Control. When a threat has passed, the system announces "clear of conflict".

TCAS II

TCAS II is the second and current generation of TCAS, used in the majority of commercial aviation aircraft (see table below). It offers all the benefits of TCAS I, but will also offer the pilot direct, vocalized instructions to avoid danger, known as a "Resolution Advisory" (RA). The suggestive action may be "corrective", suggesting the pilot change vertical speed by announcing, "descend, descend", "climb, climb" or "Adjust Vertical Speed Adjust" (meaning reduce or increase vertical speed). By contrast a "preventive" RA may be issued which simply warns the pilots not to deviate from their present vertical speed, announcing, "monitor vertical speed" or "maintain vertical speed". TCAS II systems coordinate their resolution advisories before issuing commands to the pilots, so that if one aircraft is instructed to descend, the other will typically be told to climb — maximising the separation between the two aircraft.

As of 2006, the only implementation that meets the ACAS II standards set by ICAO is Version 7.0 of TCAS II, produced by three avionics manufacturers: Rockwell Collins, Honeywell, and ACSS (Aviation Communication & Surveillance Systems; an L-3 Communications and Thales Avionics company).

TCAS III

TCAS III was the "next generation" of collision avoidance technology which underwent development by aviation companies such as Honeywell. TCAS III incorporated technical upgrades to the TCAS II system, and had the capability to offer traffic advisories and resolve traffic conflicts using "horizontal" as well as vertical manouevring directives to pilots. For instance, in a head-on situation, one aircraft might be directed, "turn right, climb" while the other would be directed "turn right, descend." This would act to further increase the total separation between aircraft, in both horizontal and vertical aspects. All work on TCAS III is currently suspended and there are no plans for its implementation.Fact|date=August 2007

Current implementation

Although the system occasionally suffers from false alarms, pilots are now under strict instructions to regard all TCAS messages as genuine alerts demanding an immediate, high-priority response. (Only stall warnings and Ground Proximity Warning System warnings have higher priority than the TCAS.) The FAA and most other countries' authorities' rules state that in the case of a conflict between TCAS RA and air traffic control (ATC) instructions, the TCAS RA always takes precedence (this is mainly because of the TCAS-RA having -by design- a more comprehensive and "up to date picture" of the situation than ATC, whose radar/transponder updates usually happen at a much slower rate than the TCAS interrogations).If one aircraft follows a TCAS RA and the other follows conflicting ATC instructions, a collision can occur, such as the July 1, 2002 Überlingen disaster. In this mid-air collision, both airplanes were fitted with TCAS II systems which functioned properly, but one obeyed the TCAS advisory while the other ignored the TCAS and obeyed the controller; both aircraft descended into a fatal collision.

In JAA countries, a Resolution Advisory may only be disregarded when both pilots visually identify the potentially conflicting traffic and decide no deviation from the current flight path is needed. [CAP 579, paragraph 6.2.4(a)]

TCAS Limitations

While the benefits of TCAS are undisputable, it can be assumed that TCAS' true technical and operational potential (and thus its possible benefits) is not yet being fully exploited because of the following limitations in current implementations:

* TCAS is limited to supporting only vertical separation advisories
* ATC isn't automatically informed about resolution advisories issued by TCAS-so that controllers may be unaware of TCAS-based resolution advisories or even issue conflicting instructions (unless ATC is explicitly informed about an issued RA during a high-workload situation), which may be a source of confusion for the affected crews
* In the above context, TCAS lacks automated facilities to enable pilots to easily report and acknowledge reception of a (mandatory) RA to ATC (and intention to comply with it), so that voice radio is currently the only option to do so, which however additionally increases pilot workload
* Today's TCAS displays do not provide information about resolution advisories issued to other (conflicting) aircraft, while resolution advisories issued to other aircraft may seem irrelevant to another aircraft, this information would enable and help crews to assess whether other aircraft (conflicting traffic) actually comply with RAs by comparing the actual rate of (altitude) change with the requested rate of change (which could be done automatically and visualized accordingly), thereby providing crucial realtime information for situational awareness during highly critical situations
* TCAS equipment today is often primarily range-based, as such it only displays the traffic situation within a configurable range of miles/feet, however under certain circumstances a "time-based" representation (i.e. within the next xx minutes) might be more intuitive.
* Lack of terrain/ground awareness information, which might be critical for creating feasible (non-dangerous, in the context of terrain clearance) and useful resolution advisories (i.e. prevent extreme descent instructions if close to terrain), to ensure that TCAS RAs never facilitate CFIT scenarios.
* Aircraft performance in general and current performance capabilities in particular (due to active aircraft configuration) are not taken into account during the negotiation and creation of resolution advisories, so that it is theoretically possible that resolution advisories are issued that demand climb or sink rates outside the normal/safe flight envelope of an aircraft during a certain phase of flight (i.e. due to the aircraft's current configuration), furthermore all traffic is being dealt with equally, there's basically no distinction taking place between different types of aircraft, neglecting the option of possibly exploiting aircraft-specific (performance) information to issue customized and optimized instructions for any given traffic conflict (i.e. by issuing climb instructions to those aircraft that can provide the best climb rates, while issuing descend instructions to aircraft providing comparatively better sink rates, thereby hopefully maximizing altitude change per time unit, that is separation)
* TCAS is primarily extrapolation-oriented, as such it is using algorithms trying to approximate 4D trajectory prediction, in order to assess and evaluate the current traffic situation within an aircraft's proximity, however the degree of data- reliability and usefulness could be significantly improved by enhancing said information with limited access to relevant flight plan information, as well as to relevant ATC instructions to get a more comprehensive picture of other traffic's (route) plans and intentions, so that flight path predictions would no longer be merely based on estimations but rather aircraft routing (FMS flight plan) and ATC instructions.
* For TCAS to work effectively, it needs to be fitted to all aircraft in a given airspace. However, TCAS is not fitted to many smaller aircraft mainly due to the high costs involved (between $25,000 and $150,000). Many smaller personal business jets for example, are currently not legally required to have TCAS installed, even though they fly in the same airspace as larger aircraft that are required to have proper TCAS equipment on board.

Regulatory situation around the world

References

ee also

*Mid-air collision (MAC)
*Gol Transportes Aéreos Flight 1907
*1996 Charkhi Dadri mid-air collision - November 12, 1996
*Bashkirian Airlines Flight 2937 - July 1, 2002

*Bitching Betty
*Ground Proximity Warning System
*Portable Collision Avoidance System

External links

* [http://www.allstar.fiu.edu/aero/TCAS.htm Discussion of TCAS]
* [http://www.collisionavoidance.org AIS-P/TailLight alternative to TCAS and ADS-B without the problems of TCAS and ADS-B]
* [http://www.airsport-corp.com/adsb2.htm Use of ADS-B as a weapon system or billing for service]
* [http://www.arinc.com/downloads/tcas/tcas.pdf Introduction to TCAS II Version 7]
* [http://www.skybrary.aero/index.php/TCAS TCAS on Skybrary]


Wikimedia Foundation. 2010.

Игры ⚽ Поможем написать реферат

Look at other dictionaries:

  • Traffic Collision Avoidance System — Indicateur TCAS et IVSI Le Traffic alert and Collision Avoidance System (TCAS) (en français, « système d alerte de trafic et d évitement de collision ») est un instrument de bord d avion destiné à éviter les collisions en vol entre… …   Wikipédia en Français

  • Traffic Collision Avoidande System — Traffic Collision Avoidance System Indicateur TCAS et IVSI Le Traffic alert and Collision Avoidance System (TCAS) (en français, « système d alerte de trafic et d évitement de collision ») est un instrument de bord d avion destiné à… …   Wikipédia en Français

  • Traffic Collision Avoidance Systems — Traffic Collision Avoidance System Indicateur TCAS et IVSI Le Traffic alert and Collision Avoidance System (TCAS) (en français, « système d alerte de trafic et d évitement de collision ») est un instrument de bord d avion destiné à… …   Wikipédia en Français

  • Portable Collision Avoidance System — PCAS, which stands for Portable Collision Avoidance System, is an aircraft collision avoidance system similar in function to TCAS (Traffic Collision Avoidance System). TCAS is the industry standard for commercial collision avoidance systems but… …   Wikipedia

  • Traffic Alert and Collision Avoidance System — TCAS Display Das Traffic Alert and Collision Avoidance System (TCAS) ist eine Implementierung des Kollisionswarnsystems Airborne Collision Avoidance System (ACAS) an Bord eines Luftfahrzeuges. Die Funktionalität des ACAS wird definiert von der… …   Deutsch Wikipedia

  • Collision avoidance system — This article is about collision avoidance in automobiles; for other modes, see collision avoidance (disambiguation). A collision avoidance system is a system of sensors that is placed within a car to warn its driver of any dangers that may lie… …   Wikipedia

  • traffic alert and collision avoidance system — A system that provides only a proximity warning to assist the pilot in the visual acquisition of intruder aircraft. The TCAS I neither provides nor authorizes any recommendations for avoidance maneuvers. The TCAS I is intended for use by smaller… …   Aviation dictionary

  • Traffic alert and Collision Avoidance System — Un TCAS o Sistema de alerta de tráfico y evasión de colisión (siglas en inglés de Traffic alert and Collision Avoidance System), es un sistema embarcado que prevé posibles colisiones entre diferentes aeronaves y funciona independientemente a los… …   Wikipedia Español

  • collision-avoidance system — A noncooperative system providing cockpit indications of all conflicting traffic. The system is meant to alert the pilot about conflicting air traffic. For this purpose, all involved aircraft must be fitted with a secondary surveillance radar… …   Aviation dictionary

  • Airborne Collision Avoidance System — (ACAS) is an ICAO (International Civil Aviation Organization) standard specified in ICAO Annex 10 Vol IV which provides pilots with a system independent of air traffic control to detect the presence of other aircraft which may present a threat of …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”