Nut (hardware)

Nut (hardware)
A nut threaded onto a bolt

A nut is a type of hardware fastener with a threaded hole. Nuts are almost always used opposite a mating bolt to fasten a stack of parts together. The two partners are kept together by a combination of their threads' friction, a slight stretch of the bolt, and compression of the parts. In applications where vibration or rotation may work a nut loose, various locking mechanisms may be employed: Adhesives, safety pins or lockwire, nylon inserts, or slightly oval-shaped threads. The most common shape is hexagonal, for similar reasons as the bolt head - 6 sides give a good granularity of angles for a tool to approach from (good in tight spots), but more (and smaller) corners would be vulnerable to being rounded off. Other specialized shapes exist for certain needs, such as wing nuts for finger adjustment and captive nuts for inaccessible areas.

Nuts are graded with strength ratings compatible with their respective bolts; for example, an ISO property class 10 nut will be able to support the bolt proof strength load of an ISO property class 10.9 bolt without stripping. Likewise, an SAE class 5 nut can support the proof load of an SAE class 5 bolt, and so on.

Nuts come in many sizes. This one is part of the Sydney Harbour Bridge

Contents

Types

Left to right: Wing, hex, hex flange, and slab weld nuts.
Left to right: Slotted, square, T, cap (or acorn), nylon locking, and castellated nuts.
Hexagon nuts.

Locknuts

Standard metric hex nuts sizes

nut quotation

Note that flat (wrench) sizes differ from industry standards. For example, wrench sizes of fastener used in Japanese built cars comply with JIS automotive standard.

Nominal diameter
hole D (mm)
Pitch
P (mm)
Flat size
A/F (mm)
External diameter
A/C (mm)
Height H (mm)
1st
choice
2nd
choice
coarse fine ISO DIN JIS Hex Nut Jam Nut Nylon Nut
1 0.25 2.5
1.2 0.25
1.4 0.3
1.6 0.35 3.2
1.8 0.35
2 0.4 4 1.6 1.2 -
2.5 0.45 5 2 1.6 -
3 0.5 5.5 6.4 2.4 1.8 4
3.5 0.6 6
4 0.7 7 7 7 8.1 3.2 2.2 5
5 0.8 8 8 8 9.2 4 2.7 5
6 1 0.75 10 10 10 11.5 5 3.2 6
7 1 11 5.5 3.5 -
8 1.25 1 13 13 12 15 6.5 4 8
10 1.5 1.25 or 1 16 17 14 19.6 8 5 10
12 1.75 1.5 or 1.25 18 19 17 22.1 10 6 12
14 2 1.5 21 22 19 11 7 14
16 2 1.5 24 24 22 27.7 13 8 16
18 2.5 2 or 1.5 27 15 9 18.5
20 2.5 2 or 1.5 30 30 34.6 16 10 20
22 2.5 2 or 1.5 32
24 3 2 36 41.6 19
27 3 2 41
30 3.5 2 46 53.1 24
33 3.5 2
36 4 3 55 63.5 29
39 4 3
42 4.5 3
45 4.5 3
48 5 3
52 5 4
56 5.5 4
60 5.5 4
64 6 4

Classifications

Mechanical specifications of Metric/English sized nuts[1]
Material Proof strength Tensile yield strength (min.) Tensile ultimate strength (min.) Nut marking Nut class
ISO 898 (Metric)
Low or medium carbon steel 380 MPa (55 ksi) 420 MPa (61 ksi) 520 MPa (75 ksi) Nut marking Metric Class 5 8.png 5
Medium carbon steel Q&T 580 MPa (84 ksi) 640 MPa (93 ksi) 800 MPa (116 ksi) Nut marking Metric Class 8 8.png 8
Alloy steel Q&T 830 MPa (120 ksi) 940 MPa (136 ksi) 1040 MPa (151 ksi) Nut marking Metric Class 10 9.png 10
SAE J995 (English)
Low or medium carbon steel 55 ksi (379 MPa) 57 ksi (393 MPa) 74 ksi (510 MPa) Nut marking SAE Grade 2.png 2
Medium carbon steel Q&T 85 ksi (586 MPa) 92 ksi (634 MPa) 120 ksi (827 MPa) Nut marking SAE Grade 5.png 5
Alloy steel Q&T 120 ksi (827 MPa) 130 ksi (896 MPa) 150 ksi (1034 MPa) Nut marking SAE Grade 8.png 8

Manufacture

Use of two nuts to prevent self-loosening

In normal use, a nut-and-bolt joint holds together because the bolt is under a constant tensile stress called the preload. The preload pulls the nut threads against the bolt threads, and the nut face against the bearing surface, with a constant force, so that the nut cannot rotate without overcoming the friction between these surfaces. If the joint is subjected to vibration, however, the preload increases and decreases with each cycle of movement. If the minimum preload during the vibration cycle is not enough to hold the nut firmly in contact with the bolt and the bearing surface, then the nut is likely to become loose.

Specialist locking nuts exist to prevent this problem, but sometimes it is sufficient to add a second nut. For this technique to be reliable, each nut must be tightened to the correct torque. The inner nut is tightened to about a quarter to a half of the torque of the outer nut. It is then held in place by a wrench while the outer nut is tightened on top using the full torque. This arrangement causes the two nuts to push on each other, creating a tensile stress in the short section of the bolt that lies between them. Even when the main joint is vibrated, the stress between the two nuts remains constant, thus holding the nut threads in constant contact with the bolt threads and preventing self-loosening. When the joint is assembled correctly, the outer nut bears the full tension of the joint. The inner nut functions merely to add a small additional force to the outer nut and does not need to be as strong, so a thin nut (also called a jam nut) can be used.[2]

See also

References

  1. ^ Bickford & Nassar 1998, p. 153.
  2. ^ The Use of Two Nuts to Prevent Self Loosening, Bolt Science Limited, accessed 2011-07-17

Bibliography

External links


Wikimedia Foundation. 2010.

Игры ⚽ Нужно решить контрольную?

Look at other dictionaries:

  • Nut — may refer to: Nut (fruit), the large, usually oily seed of some plants (such as a hazelnut, chestnut, etc.) Nut grass, (Cyperus rotundus) sometimes known as the World s worst weed . Nut (hardware), a fastener used with a bolt Nut (climbing), a… …   Wikipedia

  • Washer (hardware) — Assorted washers: flat, split, star and insulated A washer is a thin plate (typically disk shaped) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such as a screw or nut. Other uses are… …   Wikipedia

  • Drum hardware — The drum kit …   Wikipedia

  • Cage nut — A cage nut consists of a square nut in a spring steel cage which wraps around the nut. The cage has two wings that when compressed allow the cage to be inserted into the square holes in equipment racks, and when released hold the nut in position… …   Wikipedia

  • Well nut — A well nut a type of hardware fastener used to blindly fasten a piece (much like an anchor bolt) and to seal the bolt hole. It consists of a flanged neoprene bushing with a nut embedded in the non flanged end. The bolt is passed through one of… …   Wikipedia

  • acorn nut — noun (hardware) A closed nut having a dome like cap over the back, protruding part of the engaged screw or bolt. Syn: cap nut …   Wiktionary

  • Wingnut (hardware) — For other meanings see wingnut or thumbscrew (fastener). A wingnut or wing nut is a type of nut with two large metal wings , one on each side, so it can be easily tightened and loosened by hand without tools. It is sometimes called a thumbscrew …   Wikipedia

  • Screw thread — Internal and external threads illustrated using a common nut and bolt. The screw and nut pair can be used to convert torque into linear force. As the screw (or bolt) is rotated, the screw moves along its axis through the fixed nut, or the non… …   Wikipedia

  • Wingnut — may refer to:*A wingnut or wing nut, a nut (hardware), with a pair of wings to enable it to be turned without tools *Wingnut (plant) ( Pterocarya ), a genus of trees bearing winged nuts *Wingnut (politics), a derogatory American slang term for a… …   Wikipedia

  • Unified Thread Standard — Threads per inch redirects here. For the textile term, see Glossary of textile manufacturing#T. The Unified Thread Standard (UTS) defines a standard thread form and series along with allowances, tolerances, and designations for screw threads… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”