Link Aggregation Control Protocol

Link Aggregation Control Protocol

The Link Aggregation Control Protocol (LACP) is a computer networking term and is part of IEEE specification 802.3ad that can control the bundling of several physical ports together to form a single logical channel. LACP allows a network device to negotiate an automatic bundling of links by sending LACP packets to the peer (directly connected device that also implements LACP).

Advantages

* Failover when a link fails and there is a Media Converter (For Example) between the devices which means that the peer will not see the link down. With a static link aggregation the peer would continue sending traffic down the link causing it to be lost.
* The device can confirm that the other end is configured for link aggregation. With Static link aggregation a cabling or configuration mistake could go undetected and cause undesirable network behavior. [ [http://support.dell.com/support/edocs/network/LAG1855/LAGConsiderationv0.5.pdf Link aggration on Dell servers] ]
* For the advantages of combining links into a single logical link please see Link aggregation.

Practical notes

LACP works by sending frames (LACPDUs) down all links that have the protocol enabled. If a device is present on the other end of the link that also has LACP enabled, it will also independently send frames along the same links enabling the two units to detect multiple links between themselves and then combine them into a single logical link. LACP can be configured in one of two modes: Active or Passive. In Active mode it will always send frames along the configured links. In passive mode however, it acts as "speak when spoken to", and therefore can be used as a way of controlling accidental loops (as long as the other device is in active mode). [ [http://www.ieee802.org/3/ad/ IEEE 802.3ad Link Aggregration Task Force] ]

See also

* Link aggregation
* Virtual LACP (VLACP): A Nortel enhancement to the Link Aggregation Control Protocol
* Multi-Link Trunking (MLT): Nortel's Port Aggregation Protocol
* Split multi-link trunking (SMLT): Nortel's proprietary enhancement to MLT
* Routed-SMLT (RSMLT): Nortel's proprietary Layer-3 enhancement to SMLT
* Port Aggregation Protocol (PAgP): Cisco's proprietary protocol provides similar function as and pre-dates LACP
* EtherChannel

References

External links

* [http://www.ieee802.org/3/ad/ IEEE 802.3ad Link Aggregration Task Force]
* [http://www.cisco.com/en/US/products/ps6566/products_feature_guide09186a008071860b.html Cisco - Link Aggregation Control Protocol (LACP) (802.3ad) for Gigabit Interfaces]
* [http://www.juniper.net/techpubs/software/junos/junos90/swconfig-network-interfaces/exampleconfiguring-aggregated-ethernet-lacp.html Juniper M/T/J Series - Link Aggregation Control Protocol (LACP) (802.3ad) for Aggregated Ethernet Interfaces]
* [http://www.juniper.net/techpubs/software/erx/junose90/swconfig-physical/html/ethernet-config14.html Juniper E-Series - Link Aggregation Control Protocol (LACP) (802.3ad) for Aggregated Ethernet Interfaces]


Wikimedia Foundation. 2010.

Игры ⚽ Нужна курсовая?

Look at other dictionaries:

  • Link Aggregation Control Protocol — (LACP) протокол, предназначенный для объединения нескольких физических каналов в один логический в сетях Ethernet. Агрегированные каналы LACP используются как для повышения пропускной способности, так и повышения отказоустойчивости. Использование …   Википедия

  • Link Aggregation Control Protocol — Das Link Aggregation Control Protocol (LACP) ist ein Netzwerkprotokoll nach IEEE 802.3ad zur dynamischen Bündelung von physikalischen Netzwerkverbindungen. Mit Hilfe von LACP können redundante physikalische Verbindungen zwischen Switches und… …   Deutsch Wikipedia

  • Link Aggregation Control Protocol — IEEE 802.3ad Agrégation de liens entre un switch et un serveur. IEEE 802.3ad (Link Aggregation Control Protocol (LACP)) est un protocole de niveau 2 du modèle OSI qui permet de grouper plusieurs ports physiques en une seule voie logique. La norme …   Wikipédia en Français

  • Virtual Link Aggregation Control Protocol — Virtual LACP (VLACP) is a Nortel extension of the Link Aggregation Control Protocol toprovide a Layer 2 handshaking protocol which can detect end to end failure between two physical Ethernet interfaces. It allows the switch to detect… …   Wikipedia

  • Link aggregation — between a switch and a server Link aggregation or trunking or link bundling or Ethernet/network/NIC bonding[1] or NIC teaming are computer networking umbrella terms to describe various methods of combining (aggregating) multiple network… …   Wikipedia

  • Link Layer Discovery Protocol — The Link Layer Discovery Protocol (LLDP) is a vendor neutral Link Layer protocol in the Internet Protocol Suite used by network devices for advertising their identity, capabilities, and neighbors on a IEEE 802 local area network, principally… …   Wikipedia

  • Point-to-Point Protocol — Internet protocol suite Application layer BGP DHCP DNS FTP HTTP …   Wikipedia

  • Split multi-link trunking — (SMLT) is a link aggregation technology in computer networking designed by Nortel in 2001 as an enhancement to standard Multi Link Trunking (MLT) as defined in IEEE 802.3ad.Link aggregation or Multi Link Trunking (MLT) allows multiple physical… …   Wikipedia

  • Lacp — Link Aggregation Control Protocol (LACP) протокол, предназначенный для объединения нескольких физических каналов в один в сетях Ethernet. Агрегированные каналы LACP используются как для повышения пропускной способности, так и повышения… …   Википедия

  • EtherChannel — is a port trunking (aggregation in Cisco s term) technology primarily used on Cisco switches. It allows grouping several physical Ethernet links to create one logical Ethernet link for the purpose of providing fault tolerance and high speed links …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”