 Computational complexity theory

Computational complexity theory is a branch of the theory of computation in theoretical computer science and mathematics that focuses on classifying computational problems according to their inherent difficulty, and relating those classes to each other. In this context, a computational problem is understood to be a task that is in principle amenable to being solved by a computer (which basically means that the problem can be stated by a set of mathematical instructions). Informally, a computational problem consists of problem instances and solutions to these problem instances. For example, primality testing is the problem of determining whether a given number is prime or not. The instances of this problem are natural numbers, and the solution to an instance is yes or no based on whether the number is prime or not.
A problem is regarded as inherently difficult if its solution requires significant resources, whatever the algorithm used. The theory formalizes this intuition, by introducing mathematical models of computation to study these problems and quantifying the amount of resources needed to solve them, such as time and storage. Other complexity measures are also used, such as the amount of communication (used in communication complexity), the number of gates in a circuit (used in circuit complexity) and the number of processors (used in parallel computing). One of the roles of computational complexity theory is to determine the practical limits on what computers can and cannot do.
Closely related fields in theoretical computer science are analysis of algorithms and computability theory. A key distinction between analysis of algorithms and computational complexity theory is that the former is devoted to analyzing the amount of resources needed by a particular algorithm to solve a problem, whereas the latter asks a more general question about all possible algorithms that could be used to solve the same problem. More precisely, it tries to classify problems that can or cannot be solved with appropriately restricted resources. In turn, imposing restrictions on the available resources is what distinguishes computational complexity from computability theory: the latter theory asks what kind of problems can, in principle, be solved algorithmically.
Contents
Computational problems
Problem instances
A computational problem can be viewed as an infinite collection of instances together with a solution for every instance. The input string for a computational problem is referred to as a problem instance, and should not be confused with the problem itself. In computational complexity theory, a problem refers to the abstract question to be solved. In contrast, an instance of this problem is a rather concrete utterance, which can serve as the input for a decision problem. For example, consider the problem of primality testing. The instance is a number (e.g. 15) and the solution is "yes" if the number is prime and "no" otherwise (in this case "no"). Alternatively, the instance is a particular input to the problem, and the solution is the output corresponding to the given input.
To further highlight the difference between a problem and an instance, consider the following instance of the decision version of the traveling salesman problem: Is there a route of at most 2000 kilometres in length passing through all of Germany's 15 largest cities? The answer to this particular problem instance is of little use for solving other instances of the problem, such as asking for a round trip through all sites in Milan whose total length is at most 10 km. For this reason, complexity theory addresses computational problems and not particular problem instances.
Representing problem instances
When considering computational problems, a problem instance is a string over an alphabet. Usually, the alphabet is taken to be the binary alphabet (i.e., the set {0,1}), and thus the strings are bitstrings. As in a realworld computer, mathematical objects other than bitstrings must be suitably encoded. For example, integers can be represented in binary notation, and graphs can be encoded directly via their adjacency matrices, or by encoding their adjacency lists in binary.
Even though some proofs of complexitytheoretic theorems regularly assume some concrete choice of input encoding, one tries to keep the discussion abstract enough to be independent of the choice of encoding. This can be achieved by ensuring that different representations can be transformed into each other efficiently.
Decision problems as formal languages
Decision problems are one of the central objects of study in computational complexity theory. A decision problem is a special type of computational problem whose answer is either yes or no, or alternately either 1 or 0. A decision problem can be viewed as a formal language, where the members of the language are instances whose answer is yes, and the nonmembers are those instances whose output is no. The objective is to decide, with the aid of an algorithm, whether a given input string is a member of the formal language under consideration. If the algorithm deciding this problem returns the answer yes, the algorithm is said to accept the input string, otherwise it is said to reject the input.
An example of a decision problem is the following. The input is an arbitrary graph. The problem consists in deciding whether the given graph is connected, or not. The formal language associated with this decision problem is then the set of all connected graphs—of course, to obtain a precise definition of this language, one has to decide how graphs are encoded as binary strings.
Function problems
A function problem is a computational problem where a single output (of a total function) is expected for every input, but the output is more complex than that of a decision problem, that is, it isn't just yes or no. Notable examples include the traveling salesman problem and the integer factorization problem.
It is tempting to think that the notion of function problems is much richer than the notion of decision problems. However, this is not really the case, since function problems can be recast as decision problems. For example, the multiplication of two integers can be expressed as the set of triples (a, b, c) such that the relation a × b = c holds. Deciding whether a given triple is member of this set corresponds to solving the problem of multiplying two numbers.
Measuring the size of an instance
To measure the difficulty of solving a computational problem, one may wish to see how much time the best algorithm requires to solve the problem. However, the running time may, in general, depend on the instance. In particular, larger instances will require more time to solve. Thus the time required to solve a problem (or the space required, or any measure of complexity) is calculated as function of the size of the instance. This is usually taken to be the size of the input in bits. Complexity theory is interested in how algorithms scale with an increase in the input size. For instance, in the problem of finding whether a graph is connected, how much more time does it take to solve a problem for a graph with 2n vertices compared to the time taken for a graph with n vertices?
If the input size is n, the time taken can be expressed as a function of n. Since the time taken on different inputs of the same size can be different, the worstcase time complexity T(n) is defined to be the maximum time taken over all inputs of size n. If T(n) is a polynomial in n, then the algorithm is said to be a polynomial time algorithm. Cobham's thesis says that a problem can be solved with a feasible amount of resources if it admits a polynomial time algorithm.
Machine models and complexity measures
Turing Machine
Main article: Turing machineA Turing machine is a mathematical model of a general computing machine. It is a theoretical device that manipulates symbols contained on a strip of tape. Turing machines are not intended as a practical computing technology, but rather as a thought experiment representing a computing machine. It is believed that if a problem can be solved by an algorithm, there exists a Turing machine that solves the problem. Indeed, this is the statement of the Church–Turing thesis. Furthermore, it is known that everything that can be computed on other models of computation known to us today, such as a RAM machine, Conway's Game of Life, cellular automata or any programming language can be computed on a Turing machine. Since Turing machines are easy to analyze mathematically, and are believed to be as powerful as any other model of computation, the Turing machine is the most commonly used model in complexity theory.
Many types of Turing machines are used to define complexity classes, such as deterministic Turing machines, probabilistic Turing machines, nondeterministic Turing machines, quantum Turing machines, symmetric Turing machines and alternating Turing machines. They are all equally powerful in principle, but when resources (such as time or space) are bounded, some of these may be more powerful than others.
A deterministic Turing machine is the most basic Turing machine, which uses a fixed set of rules to determine its future actions. A probabilistic Turing machine is a deterministic Turing machine with an extra supply of random bits. The ability to make probabilistic decisions often helps algorithms solve problems more efficiently. Algorithms that use random bits are called randomized algorithms. A nondeterministic Turing machine is a deterministic Turing machine with an added feature of nondeterminism, which allows a Turing machine to have multiple possible future actions from a given state. One way to view nondeterminism is that the Turing machine branches into many possible computational paths at each step, and if it solves the problem in any of these branches, it is said to have solved the problem. Clearly, this model is not meant to be a physically realizable model, it is just a theoretically interesting abstract machine that gives rise to particularly interesting complexity classes. For examples, see nondeterministic algorithm.
Other machine models
Many machine models different from the standard multitape Turing machines have been proposed in the literature, for example random access machines. Perhaps surprisingly, each of these models can be converted to another without providing any extra computational power. The time and memory consumption of these alternate models may vary.^{[1]} What all these models have in common is that the machines operate deterministically.
However, some computational problems are easier to analyze in terms of more unusual resources. For example, a nondeterministic Turing machine is a computational model that is allowed to branch out to check many different possibilities at once. The nondeterministic Turing machine has very little to do with how we physically want to compute algorithms, but its branching exactly captures many of the mathematical models we want to analyze, so that nondeterministic time is a very important resource in analyzing computational problems.
Complexity measures
For a precise definition of what it means to solve a problem using a given amount of time and space, a computational model such as the deterministic Turing machine is used. The time required by a deterministic Turing machine M on input x is the total number of state transitions, or steps, the machine makes before it halts and outputs the answer ("yes" or "no"). A Turing machine M is said to operate within time f(n), if the time required by M on each input of length n is at most f(n). A decision problem A can be solved in time f(n) if there exists a Turing machine operating in time f(n) that solves the problem. Since complexity theory is interested in classifying problems based on their difficulty, one defines sets of problems based on some criteria. For instance, the set of problems solvable within time f(n) on a deterministic Turing machine is then denoted by DTIME(f(n)).
Analogous definitions can be made for space requirements. Although time and space are the most wellknown complexity resources, any complexity measure can be viewed as a computational resource. Complexity measures are very generally defined by the Blum complexity axioms. Other complexity measures used in complexity theory include communication complexity, circuit complexity, and decision tree complexity.
Best, worst and average case complexity
The best, worst and average case complexity refer to three different ways of measuring the time complexity (or any other complexity measure) of different inputs of the same size. Since some inputs of size n may be faster to solve than others, we define the following complexities:
 Bestcase complexity: This is the complexity of solving the problem for the best input of size n.
 Worstcase complexity: This is the complexity of solving the problem for the worst input of size n.
 Averagecase complexity: This is the complexity of solving the problem on an average. This complexity is only defined with respect to a probability distribution over the inputs. For instance, if all inputs of the same size are assumed to be equally likely to appear, the average case complexity can be defined with respect to the uniform distribution over all inputs of size n.
For example, consider the dc sorting algorithm quicksort. This solves the problem of sorting a list of integers that is given as the input. The worstcase is when the input is sorted or sorted in reverse order, and the algorithm takes time O(n^{2}) for this case. If we assume that all possible permutations of the input list are equally likely, the average time taken for sorting is O(n log n). The best case occurs when each pivoting divides the list in half, also needing O(n log n) time.
Upper and lower bounds on the complexity of problems
To classify the computation time (or similar resources, such as space consumption), one is interested in proving upper and lower bounds on the minimum amount of time required by the most efficient algorithm solving a given problem. The complexity of an algorithm is usually taken to be its worstcase complexity, unless specified otherwise. Analyzing a particular algorithm falls under the field of analysis of algorithms. To show an upper bound T(n) on the time complexity of a problem, one needs to show only that there is a particular algorithm with running time at most T(n). However, proving lower bounds is much more difficult, since lower bounds make a statement about all possible algorithms that solve a given problem. The phrase "all possible algorithms" includes not just the algorithms known today, but any algorithm that might be discovered in the future. To show a lower bound of T(n) for a problem requires showing that no algorithm can have time complexity lower than T(n).
Upper and lower bounds are usually stated using the big Oh notation, which hides constant factors and smaller terms. This makes the bounds independent of the specific details of the computational model used. For instance, if T(n) = 7n^{2} + 15n + 40, in big Oh notation one would write T(n) = O(n^{2}).
Complexity classes
Defining complexity classes
A complexity class is a set of problems of related complexity. Simpler complexity classes are defined by the following factors:
 The type of computational problem: The most commonly used problems are decision problems. However, complexity classes can be defined based on function problems, counting problems, optimization problems, promise problems, etc.
 The model of computation: The most common model of computation is the deterministic Turing machine, but many complexity classes are based on nondeterministic Turing machines, Boolean circuits, quantum Turing machines, monotone circuits, etc.
 The resource (or resources) that are being bounded and the bounds: These two properties are usually stated together, such as "polynomial time", "logarithmic space", "constant depth", etc.
Of course, some complexity classes have complex definitions that do not fit into this framework. Thus, a typical complexity class has a definition like the following:
 The set of decision problems solvable by a deterministic Turing machine within time f(n). (This complexity class is known as DTIME(f(n)).)
But bounding the computation time above by some concrete function f(n) often yields complexity classes that depend on the chosen machine model. For instance, the language {xx  x is any binary string} can be solved in linear time on a multitape Turing machine, but necessarily requires quadratic time in the model of singletape Turing machines. If we allow polynomial variations in running time, CobhamEdmonds thesis states that "the time complexities in any two reasonable and general models of computation are polynomially related" (Goldreich 2008, Chapter 1.2). This forms the basis for the complexity class P, which is the set of decision problems solvable by a deterministic Turing machine within polynomial time. The corresponding set of function problems is FP.
Important complexity classes
Many important complexity classes can be defined by bounding the time or space used by the algorithm. Some important complexity classes of decision problems defined in this manner are the following:
Complexity class Model of computation Resource constraint DTIME(f(n)) Deterministic Turing machine Time f(n) P Deterministic Turing machine Time poly(n) EXPTIME Deterministic Turing machine Time 2^{poly(n)} NTIME(f(n)) Nondeterministic Turing machine Time f(n) NP Nondeterministic Turing machine Time poly(n) NEXPTIME Nondeterministic Turing machine Time 2^{poly(n)} DSPACE(f(n)) Deterministic Turing machine Space f(n) L Deterministic Turing machine Space O(log n) PSPACE Deterministic Turing machine Space poly(n) EXPSPACE Deterministic Turing machine Space 2^{poly(n)} NSPACE(f(n)) Nondeterministic Turing machine Space f(n) NL Nondeterministic Turing machine Space O(log n) NPSPACE Nondeterministic Turing machine Space poly(n) NEXPSPACE Nondeterministic Turing machine Space 2^{poly(n)} It turns out that PSPACE = NPSPACE and EXPSPACE = NEXPSPACE by Savitch's theorem.
Other important complexity classes include BPP, ZPP and RP, which are defined using probabilistic Turing machines; AC and NC, which are defined using Boolean circuits and BQP and QMA, which are defined using quantum Turing machines. #P is an important complexity class of counting problems (not decision problems). Classes like IP and AM are defined using Interactive proof systems. ALL is the class of all decision problems.
Hierarchy theorems
Main articles: time hierarchy theorem and space hierarchy theoremFor the complexity classes defined in this way, it is desirable to prove that relaxing the requirements on (say) computation time indeed defines a bigger set of problems. In particular, although DTIME(n) is contained in DTIME(n^{2}), it would be interesting to know if the inclusion is strict. For time and space requirements, the answer to such questions is given by the time and space hierarchy theorems respectively. They are called hierarchy theorems because they induce a proper hierarchy on the classes defined by constraining the respective resources. Thus there are pairs of complexity classes such that one is properly included in the other. Having deduced such proper set inclusions, we can proceed to make quantitative statements about how much more additional time or space is needed in order to increase the number of problems that can be solved.
More precisely, the time hierarchy theorem states that
 .
The space hierarchy theorem states that
 .
The time and space hierarchy theorems form the basis for most separation results of complexity classes. For instance, the time hierarchy theorem tells us that P is strictly contained in EXPTIME, and the space hierarchy theorem tells us that L is strictly contained in PSPACE.
Reduction
Main article: Reduction (complexity)Many complexity classes are defined using the concept of a reduction. A reduction is a transformation of one problem into another problem. It captures the informal notion of a problem being at least as difficult as another problem. For instance, if a problem X can be solved using an algorithm for Y, X is no more difficult than Y, and we say that X reduces to Y. There are many different types of reductions, based on the method of reduction, such as Cook reductions, Karp reductions and Levin reductions, and the bound on the complexity of reductions, such as polynomialtime reductions or logspace reductions.
The most commonly used reduction is a polynomialtime reduction. This means that the reduction process takes polynomial time. For example, the problem of squaring an integer can be reduced to the problem of multiplying two integers. This means an algorithm for multiplying two integers can be used to square an integer. Indeed, this can be done by giving the same input to both inputs of the multiplication algorithm. Thus we see that squaring is not more difficult than multiplication, since squaring can be reduced to multiplication.
This motivates the concept of a problem being hard for a complexity class. A problem X is hard for a class of problems C if every problem in C can be reduced to X. Thus no problem in C is harder than X, since an algorithm for X allows us to solve any problem in C. Of course, the notion of hard problems depends on the type of reduction being used. For complexity classes larger than P, polynomialtime reductions are commonly used. In particular, the set of problems that are hard for NP is the set of NPhard problems.
If a problem X is in C and hard for C, then X is said to be complete for C. This means that X is the hardest problem in C. (Since many problems could be equally hard, one might say that X is one of the hardest problems in C.) Thus the class of NPcomplete problems contains the most difficult problems in NP, in the sense that they are the ones most likely not to be in P. Because the problem P = NP is not solved, being able to reduce a known NPcomplete problem, Π_{2}, to another problem, Π_{1}, would indicate that there is no known polynomialtime solution for Π_{1}. This is because a polynomialtime solution to Π_{1} would yield a polynomialtime solution to Π_{2}. Similarly, because all NP problems can be reduced to the set, finding an NPcomplete problem that can be solved in polynomial time would mean that P = NP.^{[2]}
Important open problems
P versus NP problem
Main article: P versus NP problemThe complexity class P is often seen as a mathematical abstraction modeling those computational tasks that admit an efficient algorithm. This hypothesis is called the Cobham–Edmonds thesis. The complexity class NP, on the other hand, contains many problems that people would like to solve efficiently, but for which no efficient algorithm is known, such as the Boolean satisfiability problem, the Hamiltonian path problem and the vertex cover problem. Since deterministic Turing machines are special nondeterministic Turing machines, it is easily observed that each problem in P is also member of the class NP.
The question of whether P equals NP is one of the most important open questions in theoretical computer science because of the wide implications of a solution.^{[2]} If the answer is yes, many important problems can be shown to have more efficient solutions. These include various types of integer programming problems in operations research, many problems in logistics, protein structure prediction in biology,^{[4]} and the ability to find formal proofs of pure mathematics theorems.^{[5]} The P versus NP problem is one of the Millennium Prize Problems proposed by the Clay Mathematics Institute. There is a US$1,000,000 prize for resolving the problem.^{[6]}
Problems in NP not known to be in P or NPcomplete
It was shown by Ladner that if P ≠ NP then there exist problems in NP that are neither in P nor NPcomplete.^{[3]} Such problems are called NPintermediate problems. The graph isomorphism problem, the discrete logarithm problem and the integer factorization problem are examples of problems believed to be NPintermediate. They are some of the very few NP problems not known to be in P or to be NPcomplete.
The graph isomorphism problem is the computational problem of determining whether two finite graphs are isomorphic. An important unsolved problem in complexity theory is whether the graph isomorphism problem is in P, NPcomplete, or NPintermediate. The answer is not known, but it is believed that the problem is at least not NPcomplete.^{[7]} If graph isomorphism is NPcomplete, the polynomial time hierarchy collapses to its second level.^{[8]} Since it is widely believed that the polynomial hierarchy does not collapse to any finite level, it is believed that graph isomorphism is not NPcomplete. The best algorithm for this problem, due to Laszlo Babai and Eugene Luks has run time 2^{O(√(n log(n)))} for graphs with n vertices.
The integer factorization problem is the computational problem of determining the prime factorization of a given integer. Phrased as a decision problem, it is the problem of deciding whether the input has a factor less than k. No efficient integer factorization algorithm is known, and this fact forms the basis of several modern cryptographic systems, such as the RSA algorithm. The integer factorization problem is in NP and in coNP (and even in UP and coUP^{[9]}). If the problem is NPcomplete, the polynomial time hierarchy will collapse to its first level (i.e., NP will equal coNP). The best known algorithm for integer factorization is the general number field sieve, which takes time O(e^{(64/9)1/3(n.log 2)1/3(log (n.log 2))2/3}) to factor an nbit integer. However, the best known quantum algorithm for this problem, Shor's algorithm, does run in polynomial time. Unfortunately, this fact doesn't say much about where the problem lies with respect to nonquantum complexity classes.
Separations between other complexity classes
Many known complexity classes are suspected to be unequal, but this has not been proved. For instance P ⊆ NP ⊆ PP ⊆ PSPACE, but it is possible that P = PSPACE. If P is not equal to NP, then P is not equal to PSPACE either. Since there are many known complexity classes between P and PSPACE, such as RP, BPP, PP, BQP, MA, PH, etc., it is possible that all these complexity classes collapse to one class. Proving that any of these classes are unequal would be a major breakthrough in complexity theory.
Along the same lines, coNP is the class containing the complement problems (i.e. problems with the yes/no answers reversed) of NP problems. It is believed^{[10]} that NP is not equal to coNP; however, it has not yet been proven. It has been shown that if these two complexity classes are not equal then P is not equal to NP.
Similarly, it is not known if L (the set of all problems that can be solved in logarithmic space) is strictly contained in P or equal to P. Again, there are many complexity classes between the two, such as NL and NC, and it is not known if they are distinct or equal classes.
It is suspected that P and BPP are equal. However, it is currently open if BPP = NEXP.
Intractability
See also: Combinatorial explosionProblems that can be solved in theory (e.g., given infinite time), but which in practice take too long for their solutions to be useful, are known as intractable problems.^{[11]} In complexity theory, problems that lack polynomialtime solutions are considered to be intractable for more than the smallest inputs. In fact, the Cobham–Edmonds thesis states that only those problems that can be solved in polynomial time can be feasibly computed on some computational device. Problems that are known to be intractable in this sense include those that are EXPTIMEhard. If NP is not the same as P, then the NPcomplete problems are also intractable in this sense. To see why exponentialtime algorithms might be unusable in practice, consider a program that makes 2^{n} operations before halting. For small n, say 100, and assuming for the sake of example that the computer does 10^{12} operations each second, the program would run for about 4 × 10^{10} years, which is roughly the age of the universe. Even with a much faster computer, the program would only be useful for very small instances and in that sense the intractability of a problem is somewhat independent of technological progress. Nevertheless a polynomial time algorithm is not always practical. If its running time is, say, n^{15}, it is unreasonable to consider it efficient and it is still useless except on small instances.
What intractability means in practice is open to debate. Saying that a problem is not in P does not imply that all large cases of the problem are hard or even that most of them are. For example the decision problem in Presburger arithmetic has been shown not to be in P, yet algorithms have been written that solve the problem in reasonable times in most cases. Similarly, algorithms can solve the NPcomplete knapsack problem over a wide range of sizes in less than quadratic time and SAT solvers routinely handle large instances of the NPcomplete Boolean satisfiability problem.
Continuous complexity theory
Continuous complexity theory can refer to complexity theory of problems that involve continuous functions that are approximated by discretizations, as studied in numerical analysis. One approach to complexity theory of numerical analysis^{[12]} is information based complexity.
Continuous complexity theory can also refer to complexity theory of the use of analog computation, which uses continuous dynamical systems and differential equations.^{[13]} Control theory can be considered a form of computation and differential equations are used in the modelling of continuoustime and hybrid discretecontinuoustime systems.^{[14]}
History
Before the actual research explicitly devoted to the complexity of algorithmic problems started off, numerous foundations were laid out by various researchers. Most influential among these was the definition of Turing machines by Alan Turing in 1936, which turned out to be a very robust and flexible notion of computer.
Fortnow & Homer (2003) date the beginning of systematic studies in computational complexity to the seminal paper "On the Computational Complexity of Algorithms" by Juris Hartmanis and Richard Stearns (1965), which laid out the definitions of time and space complexity and proved the hierarchy theorems.
According to Fortnow & Homer (2003), earlier papers studying problems solvable by Turing machines with specific bounded resources include John Myhill's definition of linear bounded automata (Myhill 1960), Raymond Smullyan's study of rudimentary sets (1961), as well as Hisao Yamada's paper^{[15]} on realtime computations (1962). Somewhat earlier, Boris Trakhtenbrot (1956), a pioneer in the field from the USSR, studied another specific complexity measure.^{[16]} As he remembers:
However, [my] initial interest [in automata theory] was increasingly set aside in favor of computational complexity, an exciting fusion of combinatorial methods, inherited from switching theory, with the conceptual arsenal of the theory of algorithms. These ideas had occurred to me earlier in 1955 when I coined the term "signalizing function", which is nowadays commonly known as "complexity measure".—Boris Trakhtenbrot, From Logic to Theoretical Computer Science – An Update. In: Pillars of Computer Science, LNCS 4800, Springer 2008.In 1967, Manuel Blum developed an axiomatic complexity theory based on his axioms and proved an important result, the so called, speedup theorem. The field really began to flourish when the US researcher Stephen Cook and, working independently, Leonid Levin in the USSR, proved that there exist practically relevant problems that are NPcomplete. In 1972, Richard Karp took this idea a leap forward with his landmark paper, "Reducibility Among Combinatorial Problems", in which he showed that 21 diverse combinatorial and graph theoretical problems, each infamous for its computational intractability, are NPcomplete.^{[17]}
See also
 List of computability and complexity topics
 List of important publications in theoretical computer science
 Unsolved problems in computer science
 Category:Computational problems
 List of complexity classes
 Structural complexity theory
 Descriptive complexity theory
 Quantum complexity theory
 Context of computational complexity
 Parameterized Complexity
 Game complexity
 Proof complexity
 Transcomputational problem
Notes
 ^ Take one city, and take all possible orders of the other 14 cities. Then divide by two because it does not matter in which direction in time they come after each other: 14!/2 = 43,589,145,600.
References
 ^ See Arora & Barak 2009, Chapter 1: The computational model and why it doesn't matter
 ^ ^{a} ^{b} See Sipser 2006, Chapter 7: Time complexity
 ^ ^{a} ^{b} Ladner, Richard E. (1975), "On the structure of polynomial time reducibility" (PDF), Journal of the ACM (JACM) 22 (1): 151–171, doi:10.1145/321864.321877, http://delivery.acm.org/10.1145/330000/321877/p155ladner.pdf?key1=321877&key2=7146531911&coll=&dl=ACM&CFID=15151515&CFTOKEN=6184618.
 ^ Berger, Bonnie A.; Leighton, T (1998), "Protein folding in the hydrophobichydrophilic (HP) model is NPcomplete", Journal of Computational Biology 5 (1): p27–40, doi:10.1089/cmb.1998.5.27, PMID 9541869.
 ^ Cook, Stephen (April 2000), The P versus NP Problem, Clay Mathematics Institute, http://www.claymath.org/millennium/P_vs_NP/Official_Problem_Description.pdf, retrieved 20061018.
 ^ Jaffe, Arthur M. (2006), "The Millennium Grand Challenge in Mathematics", Notices of the AMS 53 (6), http://www.ams.org/notices/200606/feajaffe.pdf, retrieved 20061018.
 ^ Arvind, Vikraman; Kurur, Piyush P. (2006), "Graph isomorphism is in SPP", Information and Computation 204 (5): 835–852, doi:10.1016/j.ic.2006.02.002.
 ^ Uwe Schöning, "Graph isomorphism is in the low hierarchy", Proceedings of the 4th Annual Symposium on Theoretical Aspects of Computer Science, 1987, 114–124; also: Journal of Computer and System Sciences, vol. 37 (1988), 312–323
 ^ Lance Fortnow. Computational Complexity Blog: Complexity Class of the Week: Factoring. September 13, 2002. http://weblog.fortnow.com/2002/09/complexityclassofweekfactoring.html
 ^ Boaz Barak's course on Computational Complexity Lecture 2
 ^ Hopcroft, J.E., Motwani, R. and Ullman, J.D. (2007) Introduction to Automata Theory, Languages, and Computation, Addison Wesley, Boston/San Francisco/New York (page 368)
 ^ Complexity Theory and Numerical Analysis, Steve Smale, Acta Numerica, 1997  Cambridge Univ Press
 ^ A Survey on Continuous Time Computations, Olivier Bournez, Manuel Campagnolo, New Computational Paradigms. Changing Conceptions of What is Computable. (Cooper, S.B. and L{\"o}we, B. and Sorbi, A., Eds.). New York, SpringerVerlag, pages 383423. 2008
 ^ Computational Techniques for the Verification of Hybrid Systems, Claire J. Tomlin, Ian Mitchell, Alexandre M. Bayen, Meeko Oishi, Proceedings of the IEEE, Vol. 91, No. 7, July 2003.
 ^ Yamada, H. (1962). "RealTime Computation and Recursive Functions Not RealTime Computable". IEEE Transactions on Electronic Computers EC11 (6): 753–760. doi:10.1109/TEC.1962.5219459.
 ^ Trakhtenbrot, B.A.: Signalizing functions and tabular operators. Uchionnye Zapiski Penzenskogo Pedinstituta (Transactions of the Penza Pedagogoical Institute) 4, 75–87 (1956) (in Russian)
 ^ Richard M. Karp (1972), "Reducibility Among Combinatorial Problems", in R. E. Miller and J. W. Thatcher (editors), Complexity of Computer Computations, New York: Plenum, pp. 85–103, http://www.cs.berkeley.edu/~luca/cs172/karp.pdf
Textbooks
 Arora, Sanjeev; Barak, Boaz (2009), Computational Complexity: A Modern Approach, Cambridge, ISBN 9780521424264, http://www.cs.princeton.edu/theory/complexity/
 Downey, Rod; Fellows, Michael (1999), Parameterized complexity, Berlin, New York: SpringerVerlag, http://www.springer.com/sgw/cda/frontpage/0,11855,502215199140,00.html?referer=www.springer.de%2Fcgibin%2Fsearch_book.pl%3Fisbn%3D038794883X
 Du, DingZhu; Ko, KerI (2000), Theory of Computational Complexity, John Wiley & Sons, ISBN 9780471345060
 Goldreich, Oded (2008), Computational Complexity: A Conceptual Perspective, Cambridge University Press, http://www.wisdom.weizmann.ac.il/~oded/ccbook.html
 van Leeuwen, Jan, ed. (1990), Handbook of theoretical computer science (vol. A): algorithms and complexity, MIT Press, ISBN 9780444880710
 Papadimitriou, Christos (1994), Computational Complexity (1st ed.), Addison Wesley, ISBN 0201530821
 Sipser, Michael (2006), Introduction to the Theory of Computation (2nd ed.), USA: Thomson Course Technology, ISBN 0534950973
 Garey, Michael R.; Johnson, David S. (1979), Computers and Intractability: A Guide to the Theory of NPCompleteness, W. H. Freeman, ISBN 0716710455
Surveys
 Khalil, Hatem; Ulery, Dana (1976), A Review of Current Studies on Complexity of Algorithms for Partial Differential Equations, ACM '76 Proceedings of the 1976 Annual Conference, pp. 197, doi:10.1145/800191.805573, http://portal.acm.org/citation.cfm?id=800191.805573
 Cook, Stephen (1983), "An overview of computational complexity", Commun. ACM (ACM) 26 (6): 400–408, doi:10.1145/358141.358144, ISSN 00010782
 Fortnow, Lance; Homer, Steven (2003), "A Short History of Computational Complexity", Bulletin of the EATCS 80: 95–133, http://people.cs.uchicago.edu/~fortnow/papers/history.pdf
 Mertens, Stephan (2002), "Computational Complexity for Physicists", Computing in Science and Engg. (Piscataway, NJ, USA: IEEE Educational Activities Department) 4 (3): 31–47, arXiv:condmat/0012185, doi:10.1109/5992.998639, ISSN 15219615
External links
Important complexity classes (more) Classes considered feasible Classes suspected to be infeasible UP • NP (NPcomplete · NPhard · coNP · coNPcomplete) • AM • PH • PP • #P (#Pcomplete) • IP • PSPACE (PSPACEcomplete)Classes considered infeasible Class hierarchies Families of complexity classes Categories:
Wikimedia Foundation. 2010.
Look at other dictionaries:
Computational learning theory — In theoretical computer science, computational learning theory is a mathematical field related to the analysis of machine learning algorithms. Contents 1 Overview 2 See also 3 References 3.1 Surveys … Wikipedia
Computational number theory — In mathematics, computational number theory, also known as algorithmic number theory, is the study of algorithms for performing number theoretic computations. The best known problem in the field is integer factorization. See also Computational… … Wikipedia
Complexity theory — may refer to: The study of a complex system or complex systems Complexity theory and organizations, the application of complexity theory to strategy Complexity economics, the application of complexity theory to economics Chaos theory, the study… … Wikipedia
Computational Complexity — may refer to: Computational complexity theory Computational Complexity (journal) This disambiguation page lists articles associated with the same title. If an internal link led you here, you may wish to c … Wikipedia
Computational complexity of mathematical operations — The following tables list the running time of various algorithms for common mathematical operations. Here, complexity refers to the time complexity of performing computations on a multitape Turing machine.[1] See big O notation for an explanation … Wikipedia
Complexity theory and organizations — Complexity theory and organizations, also called complexity strategy or complex adaptive organization, is the use of Complexity theory in the field of strategic management and organizational studies. Contents 1 Overview 2 Early research 3 Later… … Wikipedia
Complexity theory and strategy — Complexity theory has been used extensively in the field of strategic management and organizational studies, sometimes called complexity strategy or complex adaptive organization on the internet or in popular press. Broadly speaking, complexity… … Wikipedia
complexity theory — noun The study and classification of decision problems by the computational resources such as time and space needed by the programs that solve the problems. The professor of complexity theory says that the problem can be solved in polynomial time … Wiktionary
complexity theory — noun : a field of study shared by mathematics and computer science that is concerned with how the computational complexity of problems increases as the number of cases involved increases and with the classification of the problems according to… … Useful english dictionary
Descriptive complexity theory — For other uses, see Kolmogorov complexity. Descriptive complexity is a branch of computational complexity theory and of finite model theory that characterizes complexity classes by the type of logic needed to express the languages in them. For… … Wikipedia