Commodore 1571

Commodore 1571
The Commodore 1571 disk drive

The Commodore 1571 was Commodore's high-end 5¼" floppy disk drive. With its double-sided drive mechanism, it had the ability to utilize double-sided, double-density (DS/DD) floppy disks natively. This was in contrast to its predecessors, the 1541 and 1570, which could fully utilize such disks only if the user manually flipped them over to access the second side. (However, the two methods were not interchangeable; disk which had their back side created in a 1541 by flipping them over would have to be flipped in the 1571 too, and the back side of disks written in a 1571 using the native support for two-sided operation could not be read in a 1541).

The 1571 was released to match the Commodore 128, both design-wise and feature-wise. It was announced in the summer of 1985, at the same time as the C128, and became available in quantity later that year. The later C128D had a 1571-compatible drive integrated in the system unit. A double-sided disk on the 1571 would have a capacity of 340 KB (70 tracks, 1,360 disk blocks of 256 bytes each); as 8 KB are reserved for system use (directory and block availability information) and, under CBM DOS, 2 bytes of each block serve as pointers to the next logical block, 254 x 1,328 = 337,312 B or about 329.4 KB were available for user data. (However, with a program organizing disk storage on its own, all space could be used, e.g. for data disks.)

Depending on format, CP/M disks would format to 360 KB, with a mechanical maximum capacity of a 400 KB format (as with DD 5.25" drives generally).

The 1571 featured a "burst mode" when used in conjunction with the C128 (although not when used with the Commodore 64 or VIC-20). This mode replaced the slow bit-banging serial routines of the 1541 with a true serial shift register implemented in hardware, thus dramatically increasing the drive speed. Although this originally had been planned when Commodore first switched from the parallel IEEE-488 interface to a custom serial interface, hardware bugs in the VIC-20's 6522 VIA shift register prevented it from working properly [1].

For compatibility with copy-protected software, the 1571 could closely emulate the 1541. This mode was the default when the drive was used in conjunction with a C64; while always being able to read and write the 1541's GCR format of 170 KB DD single-sided, in this mode it also would format disks single-sided and transfer data at 1541 speed. An undocumented command allowed the drive to format and use the second side of a disk, but only in single-sided mode.

The 1571 was noticeably quieter than its predecessor and tended to run cooler as well, even though, like the 1541, it had an internal power supply (later Commodore drives, like the 1541-II and the 3½" 1581, came with external power supplies). The 1541-II/1581 power supply makes mention of a 1571-II, hinting that Commodore may have intended to release a version of the 1571 with an external power supply. However, no 1571-IIs are known to exist. The embedded OS in the 1571 was CBM DOS V3.0 1571, an improvement over the 1541's V2.6.

Early 1571s had a bug in the ROM-based disk operating system that caused relative files to corrupt if they occupied both sides of the disk. A version 2 ROM was released, but though it cured the initial bug, it introduced some minor quirks of its own - particularly with the 1541 emulation. Curiously, it was also identified as V3.0.

Unlike the 1541, which was limited to GCR formatting, the 1571 could do both GCR and MFM disk formats. A C128 in CP/M mode equipped with a 1571 was capable of reading and writing floppy disks formatted for many CP/M computers; specifically, the following formats:

Other MFM formats were possible if their characteristics were added to the CP/M C128-specific source code (available from Commodore) and the CP/M operating system were re-assembled. However, booting CP/M was only supported from disks in the standard Commodore GCR format; the MFM formats could only be used once the system was running.

With additional software, it was possible to read and write to MS-DOS-formatted floppies as well. Numerous commercial and public-domain programs for this purpose became available, the best-known being SOGWAP's "Big Blue Reader". Although the C128 could not run any DOS-based software, this capability allowed data files to be exchanged with PC users. Reading Atari 8-bit 130kB or 180kB disks was possible as well with special software, but the standard Atari 8-bit 90kB format, which used FM rather than MFM encoding, could not be handled by the 1571 hardware without modifying the drive circuitry as the control line that determines if FM or MFM encoding is used by the disc controller chip was permanently wired to ground (MFM mode) rather than being under software control.

As with the 1541, Commodore initially could not meet demand for the 1571, and that lack of availability and the drive's relatively high price (about US$300) presented an opportunity for cloners. Two 1571 clones appeared, one from Oceanic and one from Blue Chip, but legal action from Commodore quickly drove them from the market.

Commodore announced a dual-drive version of the 1571, to be called the 1572, but quickly cancelled it, reportedly due to technical difficulties with the 1572 DOS.

The 1571 built into the European plastic-case C128 D computer is electronically identical to the stand-alone version, but 1571 version integrated into the later metal-case C128 D (often called C128 DCR, for D Cost Reduced) differs a lot from the stand-alone 1571. It includes a newer DOS, version 3.1, replaces the MOS Technology CIA interface chip, of which only a few features were used by the 1571 DOS, with a very much simplified chip called 5710, and has some compatibility issues with the stand-alone drive. Because this internal 1571 does not have an unused 8-bit input/output port on any chip, unlike most other Commodore drives, it is not possible to install a parallel cable in this drive, such as that used by SpeedDOS, Dolphin DOS and some other fast third-party Commodore DOS replacements.

In the 1541 format, while 40 tracks are possible for a 5.25" DD drive like the 154x/157x, only 35 tracks are used. Commodore chose not to use the upper five tracks by default (or at least to use more than 35) due to the bad quality of some of the drive mechanisms, which did not always work reliably on those tracks. By reducing the number of tracks used (and thus the capacity), Commodore could further reduce cost - in contrast to the double-density drives used e.g. in IBM PCs of the day which saved 180 KB on one side (by using a 40-track format).

For compatibility and ease of implementation, the 1571's double-sided format of one logical disk side with 70 tracks was created by putting together the lower 35 physical tracks on each of the physical sides of the disk rather than using two times 40 tracks, even though there were no more quality problems with the mechanisms of the 1571 drives.

External links

References

  • Ellinger, Rainer (1986). 1571 Internals. Grand Rapids, MI: Abacus Software (translated from the original German edition, Düsseldorf: Data Becker GmbH). ISBN 0-916439-44-5.

Wikimedia Foundation. 2010.

Игры ⚽ Поможем написать курсовую

Look at other dictionaries:

  • Commodore 1581 — The Commodore 1581 is a 3½ inch double sided double density floppy disk drive made by Commodore Business Machines (CBM) primarily for its C64 and C128 home/personal computers. The drive stores 800 kilobytes using an MFM enco …   Wikipedia

  • Commodore 1570 — The Commodore 1570 was a 5¼ floppy disk drive for the Commodore 128 home/personal computer. It was a single sided, 170KB version of the double sided Commodore 1571, released as a stopgap measure when Commodore International was unable to provide… …   Wikipedia

  • Commodore 1570 — La Commodore 1570 fue una unidad externa de disquete de 5,25 pulgadas creada para el ordenador doméstico Commodore 128, aunque puede utilizarse con los Commodore 64. Fue lanzado por Commodore International como un sustituto temporal de la… …   Wikipedia Español

  • Commodore 1572 — The Commodore 1572 was a dual floppy disk drive designed by Commodore. It reached the prototype stage, and was introduced at the Consumer Electronics Show in 1985, but was never released to the public. One reason it was never released was that… …   Wikipedia

  • Commodore 128 — Computadora presentada en 1985. ● Capacidad de memoria: 128 KB. (La commodore 64 tenia 64 KB). ● Procesadores: MOS Technolgy 8502 corriendo a 2 MHz, o a 1 MHz al emular la Commodore 64. Zilog Z80A ● Disquetera: Commodore 1571 ● Disquete: 5 1/4… …   Enciclopedia Universal

  • Commodore 128 — Release date 1985 Discontinued 1989 Operating system Commodore BASIC 7.0 Digital Research CP/M 3.0 …   Wikipedia

  • Commodore 64 peripherals — Commodore 64 Home Computer This article is about the various external peripherals of the Commodore 64 home computer. Contents 1 Storage …   Wikipedia

  • Commodore 128 — Hersteller Commodore …   Deutsch Wikipedia

  • Commodore DOS — Commodore DOS, aka CBM DOS, was the disk operating system used with Commodore s 8 bit computers. Unlike most other DOS systems before or since which are booted from disk into the main computer s own RAM at startup, and executed there CBM DOS was… …   Wikipedia

  • Commodore DOS — (Disk Operating System) ist der Name des Disketten Betriebssystems der Firma Commodore, das in den Diskettenlaufwerken der Commodore 8 Bit Reihe eingesetzt wurde, z. B. CBM 3040, CBM 4040, CBM 8050, CBM 8250, VC1540, VC1541, VC1570/71,… …   Deutsch Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”