Comparison of wireless data standards

Comparison of wireless data standards

A comparison of wireless data standards can be made by several different measures.

Contents

Introduction

A wide variety of different wireless data technologies exist, some in direct competition with one another, others designed for specific applications. Wireless technologies can be evaluated by a variety of different metrics described below.

Standards can be grouped as follows:

UWB, Bluetooth, ZigBee, and Wireless USB are intended for use as wireless personal area network (PAN) systems. They are intended for short range communication between devices typically controlled by a single person. A keyboard might communicate with a computer, or a mobile phone with a handsfree kit, using any of these technologies.

Wi-Fi is a product name for a system intended for a Wireless Local Area Network (WLAN). A WLAN is an implementation of a LAN over a microcellular wireless system. Such systems are used to provide wireless Internet access (and access to other systems on the local network such as other computers, shared printers, and other such devices) throughout a local area. Typically a WLAN offers much better rate and latency than the user's Internet access, being designed for local communication. While Wi-Fi may be offered in many places as an Internet access system, access speeds are usually more limited by the shared Internet connection and number of users than the technology itself. Other systems that provide WLAN functionality include DECT and HIPERLAN.

GPRS, EDGE and 1xRTT evolved from 2G cellular systems, providing Internet access to users of existing 2G networks. Both EDGE and 1xRTT are 3G standards, as defined by the ITU, but are generally deployed on existing networks. 3G systems such as EV-DO, W-CDMA (including HSDPA and HSUPA) provide combined circuit switched and packet switched data and voice services, usually at better data rates than the 2G extensions. All of these services can be used to provide combined mobile phone access and Internet access at remote locations. Typically GPRS and 1xRTT provide stripped down, mobile phone oriented, Internet access, such as WAP, multimedia messaging, and the downloading of ring-tones, whereas EV-DO and HSDPA's higher speeds make them suitable for use as a broadband replacement.

Pure packet-switched only systems can be created using 3G network technologies, and UMTS-TDD is one example of this. Alternatively, next generation systems such as WiMAX also provide pure packet switched services with no need to support the circuit switching services required for voice systems. WiMAX is available in multiple configurations, including both NLOS and LOS variants. UMTS-TDD, WiMAX, and proprietary systems such as Canopy are used by Wireless ISPs to provide broadband access without the need for direct cable access to the end user.

Some systems are designed for point-to-point line-of-sight communications, once 2 such nodes get too far apart they can no longer communicate. Other systems are designed to form a wireless mesh network using one of a variety of routing protocols. In a mesh network, when nodes get too far apart to communicate directly, they can still communicate indirectly through intermediate nodes.

Standards

The following standards are included in this comparison.

Wide Area (WAN)

  • RTT
  • EDGE
  • EV-DO x1 Rev 0, Rev A, Rev B and x3 standards.
  • Flash-OFDM: FLASH(Fast Low-latency Access with Seamless Handoff)-OFDM (Orthogonal Frequency Division Multiplexing)
  • GPRS
  • HSPA D and U standards.
  • iBurst
  • LTE
  • UMTS over W-CDMA
  • UMTS-TDD
  • Wi-Fi: 802.11 standard
  • WiMAX: 802.16 standard

Local Area (WLAN)

  • Wi-Fi: 802.11a, 802.11b, 802.11g, 802.11n standards.

Personal Area (WPAN)

Wireless Video Networks (WVAN-TV)

Currently no common nor standardised use of this term with IETF or IEEE. See WVAN-TV

Vehicle Area (WVAN)

There is currently no common use of this term with IETF or IEEE. See[1]

Overview

Comparison of Mobile Internet Access methods (This box: view · talk · edit)
Common
Name
Family Primary Use Radio Tech Downstream
(Mbit/s)
Upstream
(Mbit/s)
Notes
HSPA+ 3GPP Used in 4G CDMA/FDD
MIMO
21
42
84
672
5.8
11.5
22
168
HSPA+ is widely deployed. Revision 11 of the 3GPP states that HSPA+ is expected to have a throughput capacity of 672 Mbps.
LTE 3GPP General 4G OFDMA/MIMO/SC-FDMA 100 Cat3
150 Cat4
300 Cat5
(in 20 MHz FDD) [2]
50 Cat3/4
75 Cat5
(in 20 MHz FDD)[2]
LTE-Advanced update expected to offer peak rates up to 1 Gbit/s fixed speeds and 100 Mb/s to mobile users.
WiMAX 802.16 Mobile Internet cf. 802.16e MIMO-SOFDMA 128 (in 20 MHz bandwidth FDD) 56 (in 20 MHz bandwidth FDD) WiMAX update IEEE 802.16m is to offer peak rates of at least 1 Gbit/s fixed speeds and 100 Mbit/s to mobile users.[3]
Flash-OFDM Flash-OFDM Mobile Internet
mobility up to 200 mph (350 km/h)
Flash-OFDM 5.3
10.6
15.9
1.8
3.6
5.4
Mobile range 30 km (18 miles)
extended range 55 km (34 miles)
HIPERMAN HIPERMAN Mobile Internet OFDM 56.9
Wi-Fi 802.11
(11n)
Mobile Internet OFDM/MIMO 300 (using 4x4 configuration in 20 MHz bandwidth) or 600 (using 4x4 configuration in 40 MHz bandwidth)

Antenna, RF front end enhancements and minor protocol timer tweaks have helped deploy long range P2P networks compromising on radial coverage, throughput and/or spectra efficiency (310 km & 382 km)

iBurst 802.20 Mobile Internet HC-SDMA/TDD/MIMO 95 36 Cell Radius: 3–12 km
Speed: 250 km/h
Spectral Efficiency: 13 bits/s/Hz/cell
Spectrum Reuse Factor: "1"
EDGE Evolution GSM Mobile Internet TDMA/FDD 1.6 0.5 3GPP Release 7
UMTS W-CDMA
HSDPA+HSUPA
UMTS/3GSM General 3G CDMA/FDD

CDMA/FDD/MIMO
0.384
14.4
0.384
5.76
HSDPA is widely deployed. Typical downlink rates today 2 Mbit/s, ~200 kbit/s uplink; HSPA+ downlink up to 56 Mbit/s.
UMTS-TDD UMTS/3GSM Mobile Internet CDMA/TDD 16 Reported speeds according to IPWireless using 16QAM modulation similar to HSDPA+HSUPA
EV-DO Rel. 0
EV-DO Rev.A
EV-DO Rev.B
CDMA2000 Mobile Internet CDMA/FDD 2.45
3.1
4.9xN
0.15
1.8
1.8xN
Rev B note: N is the number of 1.25 MHz chunks of spectrum used. EV-DO is not designed for voice, and requires a fallback to 1xRTT when a voice call is placed or received.

Notes: All speeds are theoretical maximums and will vary by a number of factors, including the use of external antennae, distance from the tower and the ground speed (e.g. communications on a train may be poorer than when standing still). Usually the bandwidth is shared between several terminals. The performance of each technology is determined by a number of constraints, including the spectral efficiency of the technology, the cell sizes used, and the amount of spectrum available. For more information, see Comparison of wireless data standards.

For more comparison tables, see bit rate progress trends, comparison of mobile phone standards, spectral efficiency comparison table and OFDM system comparison table.

Peak bit rate and throughput

The peak bit rate of the standard is the net bit rate provided by the physical layer in the fastest transmission mode (using the fastest modulation scheme and error code), excluding forward error correction coding and other physical layer overhead. In practice, higher layer overhead causes the maximum throughput to be lower than the peak data rate. The typical throughput however is hard to measure, and depends on many protocol issues such as transmission schemes (slower schemes are used at longer distance from the access point), packet retransmissions and packet size. The real throughput is even lower because of other traffic sharing the same network or cell, and other facts.

For PAN and LAN standards like WiFi these levels of performance are attainable under ideal radio conditions (that is, a complete lack of interference and at close range without obstacles). For WAN standards, though, these figures are often impractical to achieve (for instance they assume you are the only user in the cell) or are not implemented or provisioned by any providers in such a way.

The typical throughput is what users have experienced most of the time when well within the usable range to the base station. This value is not known for the newest experimental standards. Note that these figures cannot be used to predict the performance of any given standard in any given environment, but rather as benchmarks against which actual experience might be compared.

Bit rate (Mbit/s)
Standard Peak Downlink Peak Uplink Range Typical Downlink throughput
CDMA RTT 1x 0.3072 0.1536 ~18 mi 0.125
CDMA EV-DO Rev. 0 2.4580 0.1536 ~18 mi 0.75[citation needed]
CDMA EV-DO Rev. A 3.1000 1.8000 ~18 mi
CDMA EV-DO Rev. B 4.9000 1.8000 ~18 mi
GSM GPRS Class 10 0.0856 0.0428 ~16 mi 0.014[citation needed]
GSM EDGE type 2 0.4736 0.4736 ~16 mi 0.034[citation needed]
GSM EDGE Evolution 1.8944 0.9472 ~16 mi
UMTS W-CDMA R99 0.3840 0.3840 ~18 mi 0.195[citation needed]
UMTS W-CDMA HSDPA 14.400 0.3840 up to 124 mi[4] 4.1[citation needed] (Tre 2007)
UMTS W-CDMA HSUPA 14.400 5.7600 up to 124 mi[4]
UMTS W-CDMA HSPA+ 42.000 22.000 up to 124 mi[4]
UMTS-TDD 16.000[5] 16.000
LTE 326.4 86.4
iBurst: iBurst 24 8 ~7.5 mi >2
Flash-OFDM: Flash-OFDM 5.3 1.8 ~18 mi avg 2.5[citation needed]
WiMAX: 802.16e 70.000 70.000 ~4 mi >10[citation needed]
WiFi: 802.11a 54.000 54.000
WiFi: 802.11b 11.000 11.000 ~30 meters 2[citation needed]
WiFi: 802.11g 54.000 54.000 ~30 meters 10[citation needed]
WiFi: 802.11n 200.00 200.00 ~50 meters 40[citation needed]
  • Downlink is the throughput from the base station to the user handset or computer.
  • Uplink is the throughput from the user handset or computer to the base station.
  • Range is the maximum range possible to receive data at 25% of the typical rate.

Latency

The latency is the time taken for the smallest packet to travel between the user terminal and base station including average time for checking, correcting and repetition.

Spectral use and efficiency

Frequency

Allocated Frequencies
Standard Frequencies Spectrum Type
UMTS over W-CDMA 850 MHz, 1.9, 1.9/2.1, and 1.7/2.1 GHz Licensed (Cellular/PCS/3G/AWS)
UMTS-TDD 450, 850 MHz, 1.9, 2, 2.5, and 3.5 GHz[6]
2 GHz
Licensed (Cellular, 3G TDD, BRS/IMT-ext, FWA)
Unlicensed (see note)
CDMA2000 (inc. EV-DO, 1xRTT) 450, 850, 900 MHz 1.7, 1.8, 1.9, and 2.1 GHz Licensed (Cellular/PCS/3G/AWS)
EDGE/GPRS 850 MHz 900 MHz 1.8 GHz 1.9 GHz Licensed (Cellular/PCS/PCN)
iBurst 1.8, 1.9 and 2.1 GHz Licensed
Flash-OFDM 450 and 870 MHz Licensed
802.16e 2.3, 2.5, 3.5, 3.7 and 5.8 GHz Licensed
802.11a 5.25, 5.6 and 5.8 GHz Unlicensed 802.11a and ISM
802.11b/g/n 2.4 GHz Unlicensed ISM
Bluetooth 2.4 GHz Unlicensed ISM
Wibree 2.4 GHz Unlicensed ISM
802.15.4 868 MHz, 915 MHz, 2.4 GHz Unlicensed ISM
Wireless USB, UWB 3.1 to 10.6 GHz Unlicensed Ultrawideband
VEmesh* 868 MHz, 915 MHz, 953 MHz Unlicensed ISM
EnOcean* 868.3 MHz Unlicensed ISM

Notes

  • Where EnOcean and VEmesh are proprietary solutions.
  • Where X/YxHz is used (e.g. 1.7/2.1 GHz), the first frequency is used for the uplink channels and the second for the downlink channels.
  • Unlicensed frequencies vary in how they can be used. 802.11a can make use of both 802.11a-only spectrum and ISM spectrum around 5–6 GHz. A portion of the 2010 MHz spectrum is allocated to unlicensed UMTS-TDD in Europe, but cannot be used for other standards, whereas ISM bands can generally be used for any technology. This improved flexibility does have the downside that ISM bands are often over-used with incompatible, interfering, technologies.
  • Unlicensed bands vary from country to country. Most have a 2.4 GHz ISM band, but other bands are only available in certain countries and non ISM bands have restrictions as noted above.
  • In Europe, part of the 2 GHz 3G TDD band is designated as unlicensed, but where available is restricted to UMTS TDD operation.[7] To date, this has been left unused and some jurisdictions are re-allocating it to licensed use only.
  • AMPS/CDMA users tend to refer to 850 MHz band as 800 MHz, whereas 850 MHz is closer and is used by the GSM/UMTS community. For consistency, it is referred to here as 850 MHz.

Deployment size

Allocated Spectrum per Channel (MHz)
Standard Spectrum
Total Uplink Downlink
iBurst 5
802.16e 10 Variable Variable
802.11a 20
802.11b 20
802.11g 20
802.11n 20 or 40
EVDO 1x A 2.5 1.25 1.25
EVDO 3x B 10 5 5
UMTS (W-CDMA) 10 5 5
UMTS-TDD 5 5/TDD 5/TDD
Spectral efficiency
(Bits per second per Hz)
Standard Downlink Uplink
iBurst 4.88 1.59
802.16e 1.91 0.84
EVDO 1x A 0.85 0.36
EVDO 3x B 0.93 0.28
HSDPA 0.78 0.14
HSUPA 0.78 0.30

See also

References

  1. ^ [www.motorola.com/staticfiles/.../Multi-net%20Mobility_FAQ.pdf]
  2. ^ a b "LTE". 3GPP web site. 2009. http://www.3gpp.org/article/lte. Retrieved August 20, 2011. 
  3. ^ "UQ (Japan) WiMAX 2 field trial". http://www.uqwimax.jp/english/news_release/201107061.html. Retrieved July 6, 2011. 
  4. ^ a b c Ericsson, Telstra Achieve World's First 200km Cell Range Mobile Broadband Coverage
  5. ^ IPWireless
  6. ^ UMTS-TDD developer's frequency notes
  7. ^ ERC/DEC/(99)25 EU Recommendation on UMTS TDD, Annex 1, points 5 and 6

External links


Wikimedia Foundation. 2010.

Игры ⚽ Нужна курсовая?

Look at other dictionaries:

  • Comparison of mobile phone standards — A comparison of mobile phone standards can be done in many ways. Contents 1 Issues 2 Comparison table 3 Traceability comparison 4 Strengths and Weaknesses of IS 95 and GSM[4] …   Wikipedia

  • Wireless — communication is the transfer of information over a distance without the use of electrical conductors or wires . [citeweb|title=Wireless Communication|url=http://www.sintef.no/content/page1 11881.aspx|publisher=sintef.no|accessdate=2008 03 16]… …   Wikipedia

  • Wireless mesh network — Animation showing self healing wireless mesh (Click to enlarge) …   Wikipedia

  • Wireless LAN — This notebook computer is connected to a wireless access point using a PC card wireless card …   Wikipedia

  • Comparison of Android devices — Galaxy Nexus, the latest Google phone Android is a software stack for mobile devices that includes an operating system, middleware and key applications.[1] …   Wikipedia

  • Comparison of video codecs — A video codec is software or a device that provides encoding and decoding which may or may not include the use of video compression and/or decompression for digital video. The compression may employ lossy data compression, so quality measurement… …   Wikipedia

  • Comparison of e-book formats — Contents 1 Format descriptions 1.1 Amazon Kindle 1.2 Archos Diffusion 1.3 Broadband eBooks (BBeB) …   Wikipedia

  • Wireless Markup Language — (which are gaining in popularity as processing power in mobile devices increases). WML historyBuilding on Openwave s HDML, Nokia s Tagged Text Markup Language (TTML) and Ericsson s proprietary markup language for mobile content, the WAP Forum… …   Wikipedia

  • Wireless electronic devices and health — For mobile phones, see Mobile phone radiation and health. The World Health Organization has acknowledged that electromagnetic fields (EMFs) are influencing the environment (but not people), and that some people are worried about possible… …   Wikipedia

  • Comparison of layout engines (non-standard HTML) — HTML HTML and HTML5 Dynamic HTML XHTML XHTML Mobile Profile and C HTML Canvas element Character encodings Document Object Model Font family HTML editor HTML element HTML Frames HTML5 video HTML scri …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”