Thermal bridge

Thermal bridge
Temperature distribution in a thermal bridge

A thermal bridge, also called a cold bridge,[1] is a fundamental of heat transfer where a penetration of the insulation layer by a highly conductive or noninsulating material takes place in the separation between the interior (or conditioned space) and exterior environments of a building assembly (also known as the building enclosure, building envelope, or thermal envelope).[2]

Thermal bridging is created when materials that are poor thermal insulators come into contact, allowing heat to flow through the path of least thermal resistance (R-value or a materials effectiveness in resisting the conduction of heat) created, although nearby layers of material separated by airspace allow little heat transfer.[3]

Insulation around a bridge is of little help in preventing heat loss or gain due to thermal bridging; the bridging has to be eliminated, rebuilt with a reduced cross-section or with materials that have better insulating properties, or with a section of material with low thermal conductivity installed between metal components to retard the passage of heat through a wall or window assembly, called a thermal break.

Contents

Concept

Several properties of materials affect heat transfer. Examples include thermal conductivities, specific heats, material densities, fluid velocities, fluid viscosities, and surface reflectance and emittance characteristics. Thermal bridges are characterized by multi-dimensional heat transfer, and therefore they cannot be adequately approximated by the one-dimensional models of calculation typically used in norms and standards for the thermal performance of buildings (U-values). Surface moisture due to condensation, typically occurring in such regions as floor-wall connections and window installations, as well as mold growth in humid environments can also be effectively prevented by means of multi-dimensional evaluation during planning and detail design.

  • Concrete balconies that extend the floor slab through the building envelope[4] are a common example of thermal bridging.
  • In commercial construction, steel or concrete members incorporated in exterior wall or roof construction often form thermal bridges. [2]
  • Metal ties in cavity walls are another type of thermal bridge commonly found in masonry construction. [2]

Thermal Bridging in Construction

Thermal bridge caused by floor

Classification:

  • Repeating thermal bridges - where bridges occur following a regular pattern, such that made by wall ties penetrating a cavity wall
  • Non-repeating thermal bridges - such as the bridging of a cavity wall by a single lintel
  • Geometrical thermal bridges - placed at the junction of two planes, such as at the corner of a wall

Thermal bridge concept and interior insulation

Interior insulation is used for preventing heat as well as cold from escaping or entering the building envelope, individual rooms, as well as pipes and various appliances. Heat loss of a building is prevented primarily by exterior insulation in the walls because they cover the most surface area of any building. There are many different types of materials which can be used for insulation with different characteristics. The different spaces for insulation in a building define different uses for it. [2]

Insulation requirements relating to thermal bridging

There are many different materials that are used for insulation, and new ones are often being created as the need for energy efficiency, sustainable design, and cheaper costs are currently what are driving new innovation. Currently, the types of insulation that are being used are:

  • Fiberglass or rock wool insulation,
  • Insulating glass or polystyrene rigid board insulation, formed in place polyurethane insulation,
  • Cellulose/perlite/vermiculite loose fill, and insulated pre-cast concrete insulation.

Each type of insulating material is used most effectively in various parts of buildings including interior walls, exterior envelopes, flooring, roofing, and basements. All insulating materials have a specific R-value, which determines their thermal resistance. A good insulating material resists the conduction of heat. The higher the thermal resistance of a part of the building envelope is, the slower the heat loss. The larger the difference between the temperature inside and outside the building, the faster the building gains or losses heat. Designing a building’s walls, roofs, and floors for the maximum amount of thermal resistance results in optimal body comfort and energy conservation. [3]

One-dimensional analysis

One-dimensional analysis is based on simple, steady state, flow of heat, which means that heat is driven by a temperature differences that does not fluctuate so that heat flow is always in one direction. The product (kA) of thermal conductivity (k) and cross sectional area (A) of the heat flow path can be used in evaluating heat flow.

See also

External links

References

Notes
  1. ^ viking-house.co.uk Cold Bridge-Thermal Bridge
  2. ^ a b c d [Allen, E, & Iano, J. (2009). Fundamentals of Building Construction: materials and methods. Hoboken, NJ: John Wiley & Sons Inc.] Fundamentals of Building Construction
  3. ^ a b [Binggeli, C. (2010). Building Systems for Interior Designers. 2nd. Hoboken, NJ: John Wiley & Sons, Inc.] Building Systems for Interior Designers
  4. ^ Why there are so few green buildings Heavy advertising site!



Wikimedia Foundation. 2010.

Игры ⚽ Нужна курсовая?

Look at other dictionaries:

  • Thermal insulation — The term thermal insulation can refer to materials used to reduce the rate of heat transfer, or the methods and processes used to reduce heat transfer.Heat energy can be transferred by conduction, convection, radiation or when undergoing a phase… …   Wikipedia

  • Thermal conductivity — In physics, thermal conductivity, k, is the property of a material that indicates its ability to conduct heat. It appears primarily in Fourier s Law for heat conduction.First, we define heat conduction by the formula::: H=frac{Delta Q}{Delta t}=k …   Wikipedia

  • Thermal break — An element of low thermal conductivity placed in an assembly to reduce or prevent the flow of thermal energy between conductive materials. In architecture some examples include the following: * Double paned windows the air or gas between the… …   Wikipedia

  • thermal break — noun A thermal insulator placed between two thermal conductors to reduce the flow of heat; often used in aluminum doors and windows. See Also: thermal bridge …   Wiktionary

  • Thermal transmittance — Thermal transmittance, also known as U value, is the rate of transfer of heat (in watts) through one square metre of a structure divided by the difference in temperature across the structure. It is expressed in watts per square metre per kelvin,… …   Wikipedia

  • Thermal lance — cutting a railroad bridge to prepare for replacement. A thermal lance, thermic lance, oxygen lance, or burning bar is a tool that burns iron in the presence of pressurized oxygen to create very high temperatures for cutting. It consists of a long …   Wikipedia

  • Thermal conductivity detector — The thermal conductivity detector (TCD) is a bulk property detector and a chemical specific detector commonly used in gas liquid chromatography. [Grob, Robert L. Ed.; Modern Practice of Gas Chromatography , John Wiley Sons, C1977, pg. 228, ] This …   Wikipedia

  • Bridge maintenance — Maintenance of today s bridge infrastructure presents many unique challenges. Transportation engineering and maintenance personnel must maintain around the clock service to millions of people each year while maintaining millions of cubic meters… …   Wikipedia

  • Old Faithful Museum of Thermal Activity — The Old Faithful Museum of Thermal Activity was one of a series of four trailside museums built in Yellowstone National Park in 1929. Funded by a grant of $118,000 from Laura Spelman Rockefeller, the museums interpreted park features for visitors …   Wikipedia

  • Ocean thermal energy conversion — Temperature differences between the surface and 1000m depth in the oceans Ocean Thermal Energy Conversion (OTEC) uses the difference between cooler deep and warmer shallow or surface ocean waters to run a heat engine and produce useful work,… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”