Earplug

Earplug
Silicone rubber earplugs for protection against water, dust etc.

An earplug is a device that is meant to be inserted in the ear canal to protect the wearer's ears from loud noises or the intrusion of water, foreign bodies, dust or excessive wind.

Contents

Protection from water

Some earplugs are primarily designed to keep water out of the ear canal, especially during swimming and watersports. These may be made of wax or moldable silicone which is custom-fitted to the ear canal by the wearer.

Exostosis, or Surfer's ear, is common among those who spend large amounts of time in water in areas with cold climates. In addition, wind may increase the prevalence of the amount of exostosis seen in one ear versus the other dependent on the direction it originates from and the orientation of the individual to the wind.[1] Custom-fitted surfer's earplugs help reduce the amount of cold water and wind that is allowed to enter the external ear canal and, thus, would help slow the progression of exostosis.

A 2003 study published in Clinical Otolaryngology found that a cotton ball saturated with petroleum jelly was more effective at keeping water out of the ear, easier to use, and more comfortable than wax plugs, foam plugs, EarGuard, or Aquafit.[2]

As many have advised, including Jacques-Yves Cousteau,[3] ear plugs are actually harmful to divers, especially scuba divers. Scuba divers breathe compressed air or other gas mixtures, at a pressure matching the water pressure. This pressure is also inside the ear, but not between the eardrum and the earplug, so the pressure behind the eardrum will often burst the eardrum. Skin divers have less pressure inside the ears, but they also have only atmospheric pressure in the outer ear canal. Vented earplugs are the only type of earplug which can be used by divers safely.

Hearing protection

There are mainly three types of earplugs for hearing protection:

  • Foam earplugs, mainly made of memory foam, which are compressed and put into the ear canal, where they expand to plug it.
  • Silicone earplugs, which are rolled into a ball and carefully molded to fit over the external portion of the ear canal, providing a snug custom fit for the wearer.
  • Flanged earplugs, including most types of musicians' or 'Hi-Fi' earplugs, as well as custom molds once they are molded.

NIOSH Mining Safety and Health Research recommends using the roll, pull, and hold method when using memory foam earplugs.[4] The process involves the user rolling the earplug into a thin rod, pulling back on the ear, and holding the earplug deep in the canal with the finger.[4] To get a complete seal, the user must wait about 20 seconds for the earplug to expand inside the canal.[4]

Furthermore, they may be either disposable or nondisposable, with foam and silicone ones generally being disposable or for use a relatively limited number of times, while solid ones generally may be regarded as nondisposable. A variation of the traditional foam earplug is the no-roll foam earplug that uses a built-in central stem to push the foam plugs into the ears. These earplugs achieve a seal due to their tapered shape, rather than expansion after being rolled.

Ear plugs are especially useful to people exposed to excessively noisy devices or environments (80 dB or more).

Level of noise in dB(A) Maximum daily exposure time
85 8 Hours
91 2 Hours
97 30 Minutes
103 7 Minutes

History

The first recorded use of wax earplugs is in the Odyssey, wherein Odysseus's crew used wax earplugs to avoid being distracted by the Sirens' songs. In 1907, the German company Ohropax, which produced earplugs, was started by German inventor Max Negwer. Current earplug material was discovered in 1967, at National Research in the USA by Ross Gardner and his team. As part of a project on sealing joints, they developed a resin with energy absorption properties. This E-A-R material was later developed into commercial memory foam earplugs.

'Basic' type plugs

Disposable foam earplugs: with coins for scale (top) and inserted into the wearer's ear.
Flight through a CT-image stack. Ear plug is stuck in a styrofoam cavity that simulates the ear canal. Ear plug adapts to the cavity.

This kind of earplug protection is often worn by industrial workers who work within hearing distance of loud machinery for long periods, and is used by the British Ministry of Defense (MoD) for soldiers to use when firing weapons. Earplugs are rated for their ability to reduce noise. In the United States, the U.S. Environmental Protection Agency mandates that hearing protection be tested to provide a Noise Reduction Rating (NRR) where a panel of ten subjects are tested in a laboratory to determine the attenuation over a range of frequencies.[5] In the European Union, hearing protectors are required to be tested according to the International Organization for Standardization (ISO) acoustical testing standard, ISO 4869 Part 1 [6] and the Single Number Rating (SNR) or High/Middle/Low (HML) ratings are calculated according to ISO 4869 Part 2.[7] In Brazil, hearing protectors are tested according to the American National Standards Institute ANSI S12.6-1997 and are rated using the Noise Reduction Rating Subject Fit NRR(SF).[8] Australia and New Zealand have different standards for protector ratings yielding a quantity SLC80 (Sound Level Class for the 80th percentile). Canada implements a class system for rating the performance of protectors. Gauger and Berger have reviewed the merits of several different rating methods and developed a rating system that is the basis of a new American National Standard, ANSI S12.68-2007 [9][10]

The various methods have slightly different interpretations, however, each method has an effective percentile associated with the rating for which that percent of the users should be able to achieve the rated attenuation. For instance the NRR is determined by the mean attenuation minus two standard deviations, thus it translates to a 98% statistic. That is at least 98 percent of users should be able to achieve that level of attenuation. The SNR and HML are a mean minus one standard deviation statistic. Therefore, approximately 86% of the users should be able to achieve that level of protection. Similarly, the NRR(SF) is a mean minus one standard deviation and represents an 86% of users should achieve that level of protection. The difference between the ratings lies in how the protectors are tested. NRR is tested with an experimenter-fit protocol. SNR/HML are tested with an experienced subject-fit protocol. NRR(SF) is tested with a naive subject-fit protocol. According to Murphy et al. (2004), these three protocols will yield different amounts of attenuation with the NRR being the greatest and NRR(SF) being the least.[11]

The experimenter-fit NRR should be adjusted per the guidelines of the National Institute for Occupational Safety and Health as the required NRR ratings differ greatly from lab tests to field tests.

To compensate for known differences between laboratory-derived attenuation values and the protection obtrained by a worker in the real world, the labeled noise reduction ratings shall be derated as follows: (1) earmuffs- subtract 25 % from the manufacturers' labeled NRR; (2) slow-recovery formable earplugs subtract 50%; and (3) all other earplugs - subtract 70% from the manufacturers labeled NRR. These derating values shall be used until such time as manufacturers test and label their products in accordance with a subject-fit method such as Method B of ANSI S12.6-1997.[12]

NIOSH, Criteria for a Recommended Standard: Occupational Noise Exposure, DHHS (NIOSH) Publication No. 98-126

The NRR(SF) used in Brazil does not require derating as it resembles the manner in which the typical user will wear hearing protection.

Most earplugs are elastic ones made of memory foam, that is typically rolled into a tightly compressed cylinder (without creases) by the wearer's fingers and then inserted in the ear canal. Once released, the earplug expands until it seals the canal, blocking the sound vibrations that could reach the eardrum. Other plugs simply push into the ear canal without being rolled first. Sometimes earplugs are connected with a cord to keep them together when not in use. Other common material bases for earplugs are viscous wax or silicone.

Other devices that provide hearing protection include electronic devices worn around and/or in the ear, designed to cancel out the loud noise of a gunshot, while possibly amplifying quieter sounds to normal levels. While rich in features, these electronic devices carry a price over one hundred times that of their foam counterparts.

Since they reduce the sound volume, earplugs are often used to help prevent hearing loss and tinnitus (ringing of the ears), amongst other ailments.

Noise reduction ratings

Hearing protectors sold in the U.S. are required by the U.S. Environmental Protection Agency (EPA) to have a noise reduction rating (NRR),[13] which is an estimate of the reduction of noise at the ear when protectors are worn properly. However, due to the discrepancy between how protectors are fit in the testing laboratory and how users wear protectors in the real world, the Occupational Safety and Health Administration (OSHA) and the National Institute for Occupational Safety and Health (NIOSH) have developed derating formulas to reduce the effective NRR.

While the NRR and the SNR (Single Number Rating) are designed to be used with C-weighted noise, which means that the lower frequencies are not de-emphasized, other ratings (NRR(SF) and NRSA) are determined for use with A-weighted noise levels, which have lower frequencies de-emphasized. The National Institute for Occupational Safety and Health recommended and the U.S. EPA mandated [13] that 7-dB compensation between C and A weighting be applied when the NRR is used with A-weighted noise levels.

OSHA has defined in their training manual for inspectors that the adequacy of hearing protection for use in a hazardous noise environment should be derated to account for how workers typically wear protection relative to how manufacturers test the protector's attenuation in the laboratory.[14] For all types of hearing protection, OSHA’s derating factor is 50%. If used with C-weighted noise, the derated NRR will become NRR/2.[14] If used with A-weighted noise, OSHA applies the 7-dB adjustment for C-A weighting first then derates the remainder.[14] For example, a protector with 33-dB attenuation would have this derating:

  • Derated NRR = (33 – 7)/2

NIOSH has proposed a different method for derating based upon the type of protector.[12] For earmuffs, the NRR should be derated by 25%, for slow-recovery foam earplugs the derating is 50% for all other protection, the derating is 70%. NIOSH applies the C-A spectral compensation differently than OSHA. Where OSHA subtracts the 7-dB factor first and derates the result, NIOSH derates the NRR first and then compensates for the C-A difference. For example, to find the derated NRR for an earmuff by using the NIOSH derating system, the following equation would be used:

  • Derated NRR = (Original NRR x (1-.25)) – 7

Expected updates

In 2007, the American National Standards Institute published a new standard for noise reduction ratings for hearing protectors, ANSI S12.68-2007. Using the real ear attenuation at threshold data collected by a laboratory test prescribed in ANSI S12.6-2008, the noise reduction statistic for A-weighted noise (NRSA) is computed using a set of 100 noises listed in the standard.[10] The noise reduction rating, rather than be computed for a single noise spectrum the NRSA incorporates variability of both subject and spectral effects.[10] ANSI S12.68 also defines a method to estimate the performance of a protector in an atypical noise environment. Building upon work from the U.S. Air Force and the ISO 4869-2 standard,[7] the protector's attenuation as a function of the difference in C and A-weighted noise level is used to predict typical performance in that noise environment. The derating may be quite severe (10 to 15 decibels) for protectors that have significant differences between low and high frequency attenuation. For "flat" attenuation protectors, the effect of C-A is less. This new system eliminates the need for calculators, relies on graphs and databases of empirical data, and is believed to be a more accurate system for determining NRRs.[10]

Musicians' or 'Hi-Fi' earplugs

Musicians' earplugs. The grey end caps contain an acoustic transmission line with a damper (attenuator) at the end while the domed flanges form a seal in outer part of the ear canal. The output port can just be seen as a small hole at the near end of the left plug

Musicians who perform music styles noted for their loud nature, especially rock music, often wear earplugs to prevent their own performances from damaging their hearing. Musicians' earplugs are designed to attenuate sounds evenly across the audio band and thus minimise their effect on the user's perception of bass and treble levels. These are commonly used by musicians and technicians, both in the studio and in concert, to avoid overexposure to high volume levels.

Earplugs made from silicone rubber. The hole seen in the left plug is the input port and extends as far as the central flange where the attenuation occurs

They generally achieve this by incorporating a tiny diaphragm to reduce low frequencies, together with absorbent or damping material for high frequencies. This means they can be quite costly, being intended for constant re-use unlike simple earplugs which are disposable. These earplugs usually give an attenuation of only about 20dB and are not intended for protection from very high noise levels (beyond 105 dB).

Example of custom earplugs worn by professional musicians

Some musicians' earplugs are custom-made for the individual listener. An audiologist administers a hearing test and makes molds of the ear. A company then makes a custom ear-piece into which different attenuator capsules can be inserted. These different capsules will provide different levels of attenuation, usually 9, 15, and 25 dB. These types of earplugs will provide the flattest attenuation and the truest isolation from outside noise, as they fit firmly into the individual's ears. They also provide much better protection from very high noise levels. This type of plug is quite popular amongst audio engineers who can safely listen to loud mixes for extended periods of time.

In other activities, hobby motorcyclists and skiers may also choose to use decibel reduction earplugs, to compensate for the ongoing noise of the wind against their head or helmet.

Flight ear protection

Earplugs are available which help to protect ears from the pain caused by airplane cabin pressure changes. Some products contain a porous ceramic insert which reportedly aids equalization of air pressure between the middle and outer ear thereby preventing pain during landings and take-offs.

Sleep

Earplugs for sleeping are made to be as comfortable as possible while blocking external sounds that may prevent or disrupt sleep. Specialized earplugs for such noises as a partner's snoring may have sound-dampening enhancements that enable the user to still hear other noises, such as an alarm clock.[15]

To determine the comfort of earplugs used for sleeping, it is important to try them on while actually lying down. The pressure on the ear between the head and pillow may cause significant discomfort. Furthermore, just tilting the head back or to the side causes significant anatomical changes in the ear canal, mostly a reduction of the ear canal diameter, which may reduce comfort if the earplug is too large.[16]

Health risks

Earplugs are generally safe, but precautions may be needed against a number of possible health risks, with additional ones appearing with long term use:

  • Pushing in earplugs into the external ear canal may cause the air pressure to rise in it, in effect pushing against the eardrum and causing pain. This may be caused by pressure on the ear while lying down on the side, and is also the case when completely expanded foam earplugs are pushed further into the ear. To bypass the latter risk, such earplugs are instead removed, compressed and inserted to the desired depth. Vice versa, when pulled out, the resultant negative pressure pulls the eardrum. Therefore, some earplugs are better carefully screwed or jiggled out rather than yanked out. Yawning does not help equalizing this air pressure difference, since it equalizes the pressures between the middle ear and the environment, while this overpressure rather is located in the outer ear, between the eardrum and the earplug.
  • If pushed too far into the ear canal, they may push ear wax and debris into the canal and possibly against the ear drum.[17] As a precaution, ear plugs should not be pushed further into the ear canal than they may be grabbed and rotated.[18] Ear wax impacted by earplugs can be removed by irrigation or other remedies, as described there.
  • There is a possibility for allergic reactions, but this is likely rare, as earplugs generally are made of immunologically inert materials.

Long-term use

Custom molded plugs are recommended for long-term use, since they are more comfortable and gentle to the skin and won't go too far into the ear canal.

Nevertheless, prolonged or frequently repeated use of ear plugs have the following health risks, in addition to the short term health risks:

  • They may cause earwax to build up and plug the outer ear, since it blocks the normal flow of earwax outwards.[19] This can result in tinnitus, hearing loss, discharge, pain or infection.[19] Excess earwax should be carefully removed from the ear, and earplugs should be cleaned regularly with water and mild soap. However, foam type ear plugs are usually designed to be disposable, and will expand and lose their memory property upon drying after washing with water and soap. They will become quite spongy, expand very quickly after being compressed, making them quite problematic in proper insertion into the ear canal. They also lose a large proportion of sound attenuating capability after such washing and drying.
  • They may cause irritation of the temporomandibular joint, which is located very close to the ear canal, causing pain. Individually fitted non-elastic earplugs may be less likely to cause this irritation compared with foam ones that expand inside the ear canal.
  • Earplugs are also a possible cause of ear inflammation, otitis externa, although the short term use of earplugs when swimming and shampooing hair may actually help prevent it. Still, many pathogenic bacteria grow well on warm, moist, foam-type plugs (polyvinylchloride (PVC) or polyurethane). However, there need also be a loss of integrity of the skin for infection to occur. Hard and poorly fitting ear plugs can scratch the skin of the ear canal and set off an episode. When earplugs are used during an acute episode, disposable plugs are recommended, or used plugs must be cleaned and dried properly to avoid contaminating the healing ear canal with infected discharge.

Custom molds

Noise and decibel reduction earplugs can be molded to fit an individual's ear canal. This is associated with a higher cost, but can help to reduce the discomfort typically experienced after longer use, or if the level of protection or performance is inadequate.

Pressure and flight earplug molds are less common, as they are typically not used as long as other earplugs, and are therefore less in demand.

For best results they are molded in the ear while in the position that they will be used. For instance, if they are to be used for sleeping then they should be molded in the ear while lying down, as different positioning of the jaws causes significant changes to the form of the ear canal, mostly a reduction of the diameter, risking the sleep earplug to be made too large otherwise. These changes can be felt by feeling with a finger just at the entrance to the ear canal while moving the jaws sideways, up and down or anterior and posterior.

Most moulded earplugs are made from silicon but other materials may be used including thermoplastics [20]

See also

References

  1. ^ King, John F.; et al. (2010). "Laterality of Exostosis in Surfers Due to Evaporative Cooling Effect". Otology & Neurotology 31 (2): 345–351. doi:10.1097/MAO.0b013e3181be6b2d. PMID 19806064. 
  2. ^ Chisholm, E.J.; Kuchai, R.; McPartlin, D. (2004). "An objective evaluation of the waterproofing qualities, ease of insertion and comfort of commonly available earplugs". Clinical Otolaryngology and Allied Sciences 29 (2): 128–32. doi:10.1111/j.1365-2273.2004.00795.x. PMID 15113295. 
  3. ^ The Silent World (New York:1953, Harper, pp. 5-6)
  4. ^ a b c "How To Wear Soft Foam Earplugs." NIOSH Mining Safety and Health
  5. ^ U.S. Environmental Protection Agency Code of Federal Regulations 40 CFR 211 Subpart B
  6. ^ ISO 4869-1 (1990). Acoustics—Hearing Protectors Part 1: Subjective method for the measurement of sound attenuation, International Organization for Standardization, Geneva.
  7. ^ a b ISO 4869-2 (1994). Acoustics—Hearing Protectors Part 2: Estimation of effective A-weighted sound pressure levels when hearing protectors are worn, International Organization for Standardization, Geneva.
  8. ^ ANSI S12.6-1997 [R2002] (2002) American National Standard for the Measuring Real-Ear Attenuation of Hearing Protectors, American National Standards Institute, New York.
  9. ^ Gauger, D., and Berger, E. H. (2004). A new hearing protector rating: The noise reduction statistic for use with A-weighting (NRSA), Technical Report No. E-A-R 04-01/HP, American National Standards Institute, New York. This report can be found online at the following URL web URL http://www.e-a-r.com/pdf/hearingcons/TO4_01EPA.pdf.
  10. ^ a b c d ANSI S12.68 (2007). American National Standard Methods of Estimating Effective A-Weighted Sound Pressure Levels When Hearing Protectors, are Worn, American National Standards Institute, New York.
  11. ^ Murphy, William J.; Franks, John R.; Berger, Elliott H.; Behar, Alberto; Casali, John G.; Dixon-Ernst, Christine; Krieg, Edward F.; Mozo, Ben T. et al. (2004). "Development of a new standard laboratory protocol for estimation of the field attenuation of hearing protection devices: Sample size necessary to provide acceptable reproducibility". The Journal of the Acoustical Society of America 115 (1): 311–23. doi:10.1121/1.1633559. PMID 14759024. 
  12. ^ a b National Institute for Occupational Safety and Health, June 1998, Criteria for a Recommended Standard: Occupational Noise Exposure, NIOSH Publication, No. 98-126
  13. ^ a b EPA Standard, Title 20, Part 211
  14. ^ a b c Occupational Health and Safety Administration, January, 1999. The OSHA Technical Manual, OSHA Publication, Section IV, Appendix IV: C.
  15. ^ Alpine - Sleepsoft ear plugs
  16. ^ http://blog.allearplugs.com/blog/2010/9/8/the-right-size-ear-plug.html – The right size ear plug (access date 2010-09-08)
  17. ^ "Can earplugs be harmful?", Netdoctor.co.uk
  18. ^ [1] Webbikeworld.com
  19. ^ a b Columbia University - Ear plugs
  20. ^ ZenPlugs Custom Moulded Earplugs

External links


Wikimedia Foundation. 2010.

Игры ⚽ Нужно решить контрольную?

Look at other dictionaries:

  • earplug — ► NOUN ▪ a piece of wax, cotton wool, etc., placed in the ear as protection against noise or water …   English terms dictionary

  • earplug — [ir′plug΄] n. a plug inserted in the outer ear, as to deaden excessive noise or keep out water when swimming …   English World dictionary

  • earplug — n. to insert an earplug * * * [ ɪəplʌg] to insert an earplug …   Combinatory dictionary

  • earplug — UK [ˈɪə(r)ˌplʌɡ] / US [ˈɪrˌplʌɡ] noun [countable] Word forms earplug : singular earplug plural earplugs a small piece of plastic or rubber that you put in your ear to keep noise or water out …   English dictionary

  • earplug — /ear plug /, n. a plug of soft, pliable material inserted into the opening of the outer ear, esp. to keep out water or noise. [1900 05; EAR1 + PLUG] * * * ▪ ornament       type of ear ornament usually inserted in pierced and distended earlobes… …   Universalium

  • earplug — /ˈɪəplʌg/ (say earplug) noun a piece of soft material, as wax, inserted into the outer ear to keep out water, noise, etc …  

  • earplug — noun Date: 1904 1. an ornament inserted in the lobe of the ear especially to distend it 2. a device of pliable material for insertion into the outer opening of the ear (as to keep out water or deaden sound) …   New Collegiate Dictionary

  • earplug — 1. noun A piece of protective clothing that is meant to be inserted in the ear canal to protect the wearers hearing from loud noises or the intrusion of water 2. verb To fit with earplugs. In this same strain of mouse, earplugging from 17 22 days …   Wiktionary

  • earplug — Generic term for occlusive devices for the external auditory canal for protection of hearing against noise induced hearing loss or to prevent water from getting into the ear. SEE ALSO: hearing protectors, under protector. * * * ea …   Medical dictionary

  • earplug — ear|plug [ˈıəplʌg US ˈır ] n [C usually plural] a small piece of rubber that you put inside your ear to keep out noise or water …   Dictionary of contemporary English

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”