Silver bromide

Silver bromide

chembox new
OtherNames = bromargyrite
bromyrite
silver(I) bromide
Section1 = Chembox Identifiers
CASNo = 7785-23-1

Section2 = Chembox Properties
Formula = AgBr
MolarMass = 187.772 g/mol
Appearance = Pale yellow solid
photosensitive
Density = 6.473 g/cm3, solid
MeltingPt = 432 °C
BoilingPt = >1502°C
Boiling_notes = decomposes
Solubility =14 μg/100 ml (20 °C)
SolubilityProduct = 5.4 × 10 -13
BandG

ElectronMobility = 4000 cm2/V-s
RefractIndex = 2.253

Section3 = Chembox Structure
CrystalStruct =
Coordination =
MolShape =

Section4 = Chembox Thermochemistry
DeltaHf = −99.5 kJ/mol
Entropy = 107.1 J.K−1.mol−1
HeatCapacity =270 J.kg–1.K–1

Section8 = Chembox Related
OtherAnions = Silver(I) fluoride
Silver chloride
Silver iodide
OtherCations = Copper(I) bromide
Mercury(I) bromide

Silver bromide (AgBr), a soft, pale-yellow, insoluble salt well known (along with other silver halides) for its unusual sensitivity to light. This property has allowed silver halides to become the basis of modern photographic materials. Greenwood, N.N., Earnshaw, A. (1984) "Chemistry of the Elements." New York: Permagon Press. pp. 1185–87.] AgBr is widely used in black-and-white photography film and is believed by some to have been used for faking the Shroud of Turin. Due to these photosensitive properties silver bromide is considered also an ionic semiconductor.cite journal
author=Hamilton, J.F.
title=Physical Properties of Silver Halide Microcrystals
journal=Photographic Science and Engineering
year=1974 | volume=18 | issue=5 | pages= 493–500
] The salt can be found naturally as the mineral bromargyrite (bromyrite).

Preparation

Although the compound can be found in mineral form, AgBr is typically prepared by the reaction of silver nitrate with an alkali bromide, typically potassium bromide:

:AgNO3(aq) + KBr(aq) → AgBr(s)+ KNO3(aq)

Although less convenient, the salt can be also prepared directly from its elements

Modern preparation of a simple, light-sensitive surface involves forming an emulsion of silver halide crystals in a gelatine, which is then coated on a film or other support. The crystals are formed by precipitation in a controlled environment to produce small, uniform crystals (typically < 1 μm in diameter and containing ~1012 Ag atoms) called grains.

Physical properties

Crystal structure

AgF, AgCl, and AgBr all have face-centered cubic (fcc) rock-salt (NaCl) lattice structure with the following lattice parameters:cite journal
author=Glaus, S. and Calzaferri, G.
title=The band structures of the silver halides AgF, AgCl, and AgBr:A comparative study
journal= Photochem. Photobiol. Sci
year=2003 | volume=2 | issue= | pages= 398&ndash;401 | doi=10.1039/b211678b
]

The larger halide ions are arranged in a cubic close-packing, while the smaller silver ions fill the octahedral gaps between them, giving a 6-coordinate structure where a silver ion Ag+ is surrounded by 6 Br- ions and vice-versa. The coordination geometry for AgBr in the NaCl structure is unexpected for Ag(I) which typically forms linear, trigonal (3-coordinated Ag) or tetrahedral (4-coordinated Ag) complexes.

Unlike the other silver halides, iodargyrite (AgI) contains a hexagonal zincite lattice structure.

olubility

The silver halides have a wide range of solubilities, noting that the solubility of AgF is about 6 x 107 times greater than that of AgI. These differences are attributed to the relative solvation enthalpies of the halide ions; the enthalpy of solvation of fluoride is anomalously large.Lide, David R. (ed). (2005)"Handbook of Chemistry and Physics", 86th Edition, The Chemical Rubber Publishing Co., Cleveland. ]

Photosensitivity

Although photographic processes have been in development since the mid 1800’s, there were no suitable theoretical explanations until 1938 with the publication of a paper by R.W. Gurney and N.F. Mott. (Proc. Roy. Soc. A164, 151-167 (1938)). This paper triggered a large amount of research in fields of solid-state chemistry and physics, as well more specifically in silver halide photosensitivity phenomena.

Moreover, further research into this mechanism revealed that the photographic properties of silver halides (in particular AgBr) were a result of deviations from an ideal crystal structure. Factors such as crystal growth, impurities, and surface defects all contribute to affect concentrations of point ionic defects and electronic traps, which subsequently affect the sensitivity to light and allow for the formation of a latent image.

;Frenkel defects and quadropolar deformationThe major defect in silver halides is the Frenkel defect, where silver ions are located interstitially (Agi+) in high concentration with their corresponding negatively-charged silver ion vacancies (Agv-). What is unique about AgBr Frenkel pairs is that the interstitial Agi+ are exceptionally mobile, and that its concentration in the layer below the grain surface (called the space charge layer) far exceeds that of the intrinsic bulk. cite journal
author=Slifkin, L. M.
title=The Physics of Lattice Defects in Silver Halides
journal=Crystal Lattice Defects and Amorphous Materials
year=1989 | volume=18 | issue= | pages= 81&ndash;96
] The formation energy of the Frenkel pair is low at 1.16 eV, and the migration activation energy is unusually low at 0.05 eV (compare to NaCl: 2.18 eV for the formation of a Schottky pair and 0.75 eV for cationic migration). These low energies result in large defect concentrations, which can reach near 1% near the melting point.

The cause of the low activation energy in silver bromide can be attributed the silver ions’ high quadrupolar polarizability; that is, it can easily deform from a sphere into an ellipsoid. This property, a result of the d9 electronic configuration of the silver ion, facilitates migration in both the silver ion and in silver ion vacancies, thus giving the unusually low migration energy (for Agv-: 0.29-0.33 eV, compared to 0.65 eV for NaCl).

Studies have demonstrated that the defect concentrations are strongly affected (up to several powers of 10) by crystal size. Most defects, such as interstitial silver ion concentration and surface kinks are inversely proportional to crystal size, although vacancy defects are directly proportional. This phenomenon is attributed to changes in the surface chemistry equilibrium, and thus affects each defect concentration differently.

Impurity concentrations can be controlled by crystal growth or direct addition of impurities to the crystal solutions. Although impurities in the silver bromide lattice are necessary to encourage Frenkel defect formation, studies by Hamilton have shown that after a particular concentration of impurities, the number of defects of interstitial silver ions and positive kinks reduce sharply by several orders of 10. After this point only silver ion vacancy defects, which actually increase in several orders of magnitude, are prominent.

;Electron traps and hole trapsWhen light is incident on the silver halide grain surface, a photoelectron is generated when a halide loses its electron to the conduction band: cite journal
author=Malinowski, J.
title=The Role of Holes in the Photographic Process
journal=The Journal of Photographic Science
year=1968 | volume=16 | issue=2 | pages= 57&ndash;62
]

:X + h&nu; → X + e

After the electron is released, it will combine with an interstitial Agi+ to create a silver metal atom Agi0:

:e- + Agi+ → Agi0

Through the defects in the crystal the electron is able to reduce its energy and become trapped in the atom. The extent of grain boundaries and defects in the crystal affect the lifetime of the photoelectron, where crystals with a large concentration of defects will trap an electron much faster than a purer crystal.

When a photoelectron is mobilized a photohole h• is also formed, which, too, needs to be neutralized. The lifetime of a photohole, however, does not correlate with that of a photoelectron. This detail suggests a different trapping mechanism; Malinowski suggests that the hole traps may be related to defects as a result of impurities. Once trapped, the holes attract mobile, negatively-charged defects in the lattice: the interstitial silver vacancy Agv-:

:h• + Agv- <-> h.Agv

The formation of the h.Agv lowers its energy sufficiently to stabilize the complex and reduce the probability of ejection of the hole back into the valance band (the equilibrium constant for hole-complex in the interior of the crystal is estimated at 10-4.

Additional investigations on electron- and hole-trapping demonstrated that impurities also can be a significant trapping system. Consequently, interstitial silver ions may not be reduced. Therefore, these traps are actually oss mechanisms and are considered trapping inefficiencies. For example, atmospheric oxygen can interact with photoelectrons to form an O2- species, which can interact with a hole to reverse the complex and undergo recombination. Metal ion impurities such as copper(I), iron(II), and cadmium(II) have demonstrated hole-trapping in silver bromide.

;Crystal surface chemistry;Once the hole-complexes are formed, they diffuse to the surface of the grain as a result of the formed concentration gradient. Studies demonstrated that the lifetime of holes near the surface of the grain are much longer than those in the bulk and that these holes are in equilibrium with adsorbed bromine. The net effect is an equilibrium push at the surface to form more holes. Therefore, as the hole-complexes reach the surface, they disassociate:

:h.Agv- → h• + Agv- → Br → ½ Br2

By this reaction equilibrium, the hole-complexes are constantly consumed at the surface, which acts as a sink, until removed from the crystal. This mechanism provides the counterpart to the reduction of the interstitial Agi+ to Agi0, giving an overall equation of:

:AgBr -> Ag + ½ Br2

;Latent image formation and photographyNow that some of the theory has been presented, the actual mechanism of the photographic process can now be discussed. To summarize, as a photographic film is subjected to an image, photons incident on the grain produce electrons which interact to yield silver metal. More photons hitting a particular grain will produce a larger concentration of silver atoms, containing between 5 and 50 silver atoms (out of ~1012 atoms), depending on the sensitivity of the emulsion. The film now has a concentration gradient of silver atom specks based upon varying intensity light across its area, producing an invisible "latent image". While this process is occurring, bromine atoms are being produced at the surface of the crystal. To collect the bromine, a layer on top of the emulsion, called a sensitizer, acts as a bromine acceptor.

During film development the latent image is intensified by addition of a chemical, typically hydroquinone, that selectivity reduces those grains which contain atoms of silver. The process, which is sensitive to temperature and concentration, will completely reduce grains to silver metal, intensifying the latent image on the order of 1010 to 1011. This step demonstrates the advantage and superiority of silver halides over other systems: the latent image, which takes only milliseconds to form and is invisible, is sufficient to produce a full image from it.

After development, the film is "fixed," during which the remaining silver salts are removed to prevent further reduction, leaving the "negative" of the film. The agent used is sodium thiosulphate, and reactions according to the following equation:

:AgX(s) + 2Na2S2O3(aq) -> Na3 [Ag(S2O3)2] (aq) + NaX(aq)

An indefinite number of positive prints can be generated from the negative by passing light through it and undergoing the same steps outlined above.

emiconductor properties

As silver bromide is heated within 100°C of its melting point, an Arrhenius plot of the ionic conductivity shows the value increasing and "upward-turning." Other physical properties such as elastic moduli, specific heat, and the electronic energy gap also increase, suggesting the crystal is approaching instability. This behavior, typical of a semi-conductor, is attributed to a temperature-dependence of Frenkel defect formation, and, when normalized against the concentration of Frenkel defects, the Arrhenius plot linearizes.

Chemistry

Silver bromide reacts readily with liquid ammonia to generate a variety of amine complexes:Leden, I., Persson, G., (1961). ACSAA4. "Acta Chem. Scand." 15: 607 - 614. ]

AgBr + nNH3 longrightarrow Ag(NH3)21+:::::{AgBr(NH3)2}
{AgBr2(NH3)2}1-
{AgBr(NH3)}
{AgBr2(NH3)}1-

Silver bromide reacts with triphenylphosphine to give a tris(triphenylphosphine) product:Engelhardt L.M., Healy P.C., Patrick, V.A., and White, A.H. (1987). "Lewis-Base Adducts of Group-11 Metal(I) Compounds. XXX. 3:1 Complexes of Triphenylphosphine With Silver(I) Halides." Aust. J. Chem. 40 (11). 1873-1880.] it is something that makes the black and white pictures clear

::

References

ee also

*Photography
*Science of photography
*Silver chloride


Wikimedia Foundation. 2010.

Игры ⚽ Нужно решить контрольную?

Look at other dictionaries:

  • silver bromide — n. a yellow white, crystalline compound, AgBr, which becomes dark when exposed to light: the main salt used in photographic emulsions …   English World dictionary

  • silver bromide — noun a bromide that darkens when exposed to light; used in making photographic emulsions • Hypernyms: ↑bromide • Substance Holonyms: ↑emulsion, ↑photographic emulsion * * * noun Etymology: silver ( …   Useful english dictionary

  • silver bromide — sidabro bromidas statusas T sritis chemija formulė AgBr atitikmenys: angl. silver bromide rus. серебра бромид; серебро бромистое …   Chemijos terminų aiškinamasis žodynas

  • silver bromide — Chem. a yellowish, water insoluble powder, AgBr, which darkens on exposure to light, produced by the reaction of silver nitrate with a bromide: used chiefly in the manufacture of photographic emulsions. [1875 80] * * * …   Universalium

  • silver bromide — /sɪlvə ˈbroʊmaɪd/ (say silvuh brohmuyd) noun a light sensitive compound, AgBr, which is of basic importance in photography. It is obtained from the reaction of a bromide with a silver salt …  

  • silver bromide — noun Date: 1869 a compound AgBr that is extremely sensitive to light and is much used for photographic materials …   New Collegiate Dictionary

  • silver bromide — sil′ver bro′mide n. chem. a yellowish powder, AgBr, that darkens on exposure to light: used chiefly in photographic emulsions • Etymology: 1875–80 …   From formal English to slang

  • Bromide (photography) — Bromide, in photography, refers to a type of photographic printing paper coated in an emulsion of silver bromide, or a photograph made thereof. Images are imprinted on the bromide paper via the gelatin silver process.It was invented in the 19th… …   Wikipedia

  • Silver nitrate — Silver nitrate …   Wikipedia

  • Bromide (disambiguation) — Bromide can refer to:In language: * Bromide (language), a figure of speech meaning a tranquilizing cliché.In chemistry: * Bromide, the anion of bromine, or any ionic salt containing bromide as the only anion, or (as a common name) any covalent… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”