# Density

﻿
Density

The mass density or density of a material is defined as its mass per unit volume. The symbol most often used for density is ρ (the Greek letter rho). In some cases (for instance, in the United States oil and gas industry), density is also defined as its weight per unit volume;[1] although, this quantity is more properly called specific weight. Different materials usually have different densities, so density is an important concept regarding buoyancy, purity and packaging. Osmium and iridium are the densest known metal elements at standard conditions for temperature and pressure but not the densest materials.

Less dense fluids float on more dense fluids if they do not mix. This concept can be extended, with some care, to less dense solids floating on more dense fluids. If the average density (including any air below the waterline) of an object is less than water (1000 kg/m3) it will float in water and if it is more than water's it will sink in water.

In some cases density is expressed as the dimensionless quantities specific gravity (SG) or relative density (RD), in which case it is expressed in multiples of the density of some other standard material, usually water or air/gas. (For example, a specific gravity less than one means that the substance floats in water.)

The mass density of a material varies with temperature and pressure. (The variance is typically small for solids and liquids and much greater for gasses.) Increasing the pressure on an object decreases the volume of the object and therefore increase its density. Increasing the temperature of a substance (with some exceptions) decreases its density by increasing the volume of that substance. In most materials, heating the bottom of a fluid results in convection of the heat from bottom to top of the fluid due to the decrease of the density of the heated fluid. This causes it to rise relative to more dense unheated material.

The reciprocal of the density of a substance is called its specific volume, a representation commonly used in thermodynamics. Density is an intensive property in that increasing the amount of a substance does not increase its density; rather it increases its mass.

## History

In a well-known but probably apocryphal tale, Archimedes was given the task of determining whether King Hiero's goldsmith was embezzling gold during the manufacture of a golden wreath dedicated to the gods and replacing it with another, cheaper alloy.[2] Archimedes knew that the irregularly shaped wreath could be crushed into a cube whose volume could be calculated easily and compared with the mass; but the king did not approve of this. Baffled, Archimedes took a relaxing immersion bath and observed from the rise of the water upon entering that he could calculate the volume of the gold wreath through the displacement of the water. Upon this discovery, he leaped from his bath and went running naked through the streets shouting, "Eureka! Eureka!" (Εύρηκα! Greek "I found it"). As a result, the term "eureka" entered common parlance and is used today to indicate a moment of enlightenment.

The story first appeared in written form in Vitruvius' books of architecture, two centuries after it supposedly took place.[3] Some scholars have doubted the accuracy of this tale, saying among other things that the method would have required precise measurements that would have been difficult to make at the time.[4][5]

Mathematically, density is defined as mass divided by volume:

$\rho = \frac{m}{V},$

where ρ is the density, m is the mass, and V is the volume. From this equation, mass density must have units of a unit of mass per unit of volume. As there are many units of mass and volume covering many different magnitudes there are a large number of units for mass density in use.

The SI unit of kilogram per cubic metre (kg/m³) and the cgs unit of gram per cubic centimetre (g/cm³) are probably the most common used units for density. (The cubic centimeter can be alternately called a millilitre or a cc.) 1000kg/m³ equals one g/cm³. In industry, other larger or smaller units of mass and or volume are often more practical and US customary units may be used. See below for a list of some of the most common units of density. Further, density may be expressed in terms of weight density (the weight of the material per unit volume) or as a ratio of the density with the density of a common material such as air or water.

## Measurement of density

The density at any point of a homogeneous object equals its total mass divided by its total volume. The mass is normally measured with an appropriate scale or balance; the volume may be measured directly (from the geometry of the object) or by the displacement of a fluid. For determining the density of a liquid or a gas, a hydrometer or dasymeter may be used, respectively. Similarly, hydrostatic weighing uses the displacement of water due to a submerged object to determine the density of the object.

If the body is not homogeneous, then the density is a function of the position. In that case the density around any given location is determined by calculating the density of a small volume around that location. In the limit of an infinitesimal volume the density of an inhomogeneous object at a point becomes: ρ(r)=dm/dV, where dV is an elementary volume at position r. The mass of the body then can be expressed as

$m = \int_V \rho(\mathbf{r})\,dV.$

The density of granular material can be ambiguous, depending on exactly how its volume is defined, and this may cause confusion in measurement. A common example is sand: if it is gently poured into a container, the density will be low; if the same sand is then compacted, it will occupy less volume and consequently exhibit a greater density. This is because sand, like all powders and granular solids, contains a lot of air space in between individual grains. The density of the material including the air spaces is the bulk density, which differs significantly from the density of an individual grain of sand with no air included.

## Changes of density

In general, density can be changed by changing either the pressure or the temperature. Increasing the pressure always increases the density of a material. Increasing the temperature generally decreases the density, but there are notable exceptions to this generalization. For example, the density of water increases between its melting point at 0 °C and 4 °C; similar behavior is observed in silicon at low temperatures.

The effect of pressure and temperature on the densities of liquids and solids is small. The compressibility for a typical liquid or solid is 10−6 bar−1 (1 bar=0.1 MPa) and a typical thermal expansivity is 10−5 K−1. This roughly translates into needing around ten thousand times atmospheric pressure to reduce the volume of a substance by one percent. (Although the pressures needed may be around a thousand times smaller for sandy soil and some clays.) A one percent expansion of volume typically requires a temperature increase on the order of thousands of degrees Celsius.

In contrast, the density of gases is strongly affected by pressure. The density of an ideal gas is

$\rho = \frac {MP}{RT}, \,$

where M is the molar mass, P is the pressure, R is the universal gas constant, and T is the absolute temperature. This means that the density of an ideal gas can be doubled by doubling the pressure, or by halving the absolute temperature.

## Density of water (at 1 atm)

Temp (°C) Density (kg/m3)
100 958.4
80 971.8
60 983.2
40 992.2
30 995.6502
25 997.0479
22 997.7735
20 998.2071
15 999.1026
10 999.7026
4 999.9720
0 999.8395
−10 998.117
−20 993.547
−30 983.854
The density of water in kilograms per cubic metre (SI unit)
at various temperatures in degrees Celsius.
The values below 0 °C refer to supercooled water.

## Density of air (at 1 atm)

Density vs. Temperature
T in °C ρ in kg/m3
–25 1.423
–20 1.395
–15 1.368
–10 1.342
–5 1.316
0 1.293
5 1.269
10 1.247
15 1.225
20 1.204
25 1.184
30 1.164
35 1.146

## Density of solutions

The density of a solution is the sum of mass (massic) concentrations of the components of that solution.
Mass (massic) concentration of a given component ρi in a solution can be called partial density of that component.

$\rho = \sum_i \rho_i \,$

Expressed as a function of the densities of pure components of the mixture and their volume participation, it reads:

$\rho = \sum_i \rho_{i,0} \frac{V_oi}{V}.\,$

## Densities of various materials

Material ρ in kg/m3 Notes
Interstellar medium 10−25 − 10−15 Assuming 90% H, 10% He; variable T
Earth's atmosphere 1.2 At sea level
Aerogel 1 − 2
Styrofoam 30 − 120[6]
liquid hydrogen 70
Cork 220 − 260[6]
Lithium 535 At STP
Potassium 860[7] At STP
Sodium 970 At STP
Ice 916.7
Water (fresh) 1000 At STP
Water (salt) 1030
Plastics 850 − 1400 For polypropylene and PETE/PVC
Magnesium 1740 At STP
Beryllium 1850 At STP
Glycerol[8] 1261
Silicon 2330 At STP
Aluminium 2700 At STP
Diamond 3500 At STP
Titanium 4540 At STP
Selenium 4800 At STP
The Earth 5515.3 Mean density
Antimony 6690 At STP
Zinc 7000 At STP
Chromium 7200 At STP
Manganese 7210 - 7440 At STP
Tin 7310 At STP
Iron 7870 At STP
Niobium 8570 At STP
Cobalt 8900 At STP
Nickel 8900 At STP
Copper 8920 − 8960 Near room temperature
Bismuth 9750 At STP
Molybdenum 10220 At STP
Silver 10500 At STP
Thorium 11700 At STP
Rhodium 12410 At STP
The Inner Core of the Earth ~13000 As listed in Earth
Mercury 13546 At STP
Tantalum 16600 At STP
Uranium 18800 At STP
Tungsten 19300 At STP
Gold 19320 At STP
Plutonium 19840 At STP
Platinum 21450 At STP
Iridium 22420 At STP
Osmium 22570 At STP
The core of the Sun ~150000
White dwarf star 1 × 109[9]
Atomic nuclei 2.3 × 1017 [10] Does not depend strongly on size of nucleus
Neutron star 8.4 × 1016 − 1 × 1018
Black hole 4 × 1017 Mean density inside the Schwarzschild radius of an Earth-mass black hole (theoretical)

## Density of composite material

In the United States, ASTM specification D792-00[11] describes the steps to calculate the density of a composite material.

$\rho = \frac{W_a}{W_a + W_w - W_b} \left (\rho_{water} \right ) \,$

where:

ρ is the density of the composite material, in g/cm3

and

Wa is the weight of the specimen when hung in the air
Ww is the weight of the partly immersed wire holding the specimen
Wb is the weight of the specimen when immersed fully in distilled water, along with the partly immersed wire holding the specimen
ρwater is the density in g/cm3 of the distilled water at testing temperature (for example 0.9975 g/cm3 at 23 °C)

## Other common units

The SI unit for density is:

Litres and metric tons are not part of the SI, but are acceptable for use with it, leading to the following units:

Densities using the following metric units all have exactly the same numerical value, one thousandth of the value in (kg/m³). Liquid water has a density of about 1 kg/dm³, making any of these SI units numerically convenient to use as most solids and liquids have densities between 0.1 and 20 kg/dm³.

• kilograms per cubic decimetre (kg/dm³)
• grams per cubic centimetre (g/cc, gm/cc or g/cm³)
• megagrams per cubic metre (Mg/m³)

In U.S. customary units density can be stated in:

In principle there are Imperial units different from the above as the Imperial gallon and bushel differ from the U.S. units, but in practice they are no longer used, though found in older documents. The density of precious metals could conceivably be based on Troy ounces and pounds, a possible cause of confusion.

## References

1. ^ "Density definition in Oil Gas Glossary". Oilgasglossary.com. Retrieved 2010-09-14.
2. ^ Archimedes, A Gold Thief and Buoyancy - by Larry "Harris" Taylor, Ph.D.
3. ^ Vitruvius on Architecture, Book IX, paragraphs 9-12, translated into English and in the original Latin.
4. ^ The first Eureka moment, Science 305: 1219, August 2004.
5. ^ Fact or Fiction?: Archimedes Coined the Term "Eureka!" in the Bath, Scientific American, December 2006.
6. ^ a b "Re: which is more bouyant [sic] styrofoam or cork". Madsci.org. Retrieved 2010-09-14.
7. ^ CRC Press Handbook of tables for Applied Engineering Science, 2nd Edition, 1976, Table 1-59
8. ^ glycerol composition at physics.nist.gov
9. ^ Extreme Stars: White Dwarfs & Neutron Stars, Jennifer Johnson, lecture notes, Astronomy 162, Ohio State University. Accessed on line May 3, 2007.
10. ^ Nuclear Size and Density, HyperPhysics, Georgia State University. Accessed on line June 26, 2009.
11. ^ (2004). Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement. ASTM Standard D792-00. Vol 81.01. American Society for Testing and Materials. West Conshohocken. PA.

Wikimedia Foundation. 2010.

Synonyms:

### Look at other dictionaries:

• Density 21.5 — is a piece of music for solo flute written by Edgard Varèse in 1936 and revised in 1946. The piece was composed at the request of Georges Barrère for the premiere of his platinum flute, the density of platinum being close to 21.5 grammes per… …   Wikipedia

• Density — 21.5 ist eine Komposition für Querflöte solo von Edgar Varèse. Das Stück gilt als richtungsweisende Komposition des 20. Jahrhunderts innerhalb des vergleichsweise schmalen Repertoires für Flöte solo. Der aus Paris stammende Komponist Edgar Varèse …   Deutsch Wikipedia

• Density 21.5 — ist eine Komposition für Querflöte solo von Edgar Varèse. Das Stück gilt als richtungsweisende Komposition des 20. Jahrhunderts innerhalb des vergleichsweise schmalen Repertoires für Flöte solo. Der aus Paris stammende Komponist Edgar Varèse,… …   Deutsch Wikipedia

• Density — Den si*ty (d[e^]n s[i^]*t[y^]), n. [L. densitas; cf. F. densit[ e].] 1. The quality of being dense, close, or thick; compactness; opposed to {rarity}. [1913 Webster] 2. (Physics) The ratio of mass, or quantity of matter, to bulk or volume, esp.… …   The Collaborative International Dictionary of English

• density — [den′sə tē] n. pl. densities [Fr densité < L densitas] 1. the quality or condition of being dense; specif., a) thickness; compactness b) stupidity c) Photog. degree of opacity of a negative 2. quantity or number per unit, as of area …   English World dictionary

• Density — Density. См. Плотность абсолютная. (Источник: «Металлы и сплавы. Справочник.» Под редакцией Ю.П. Солнцева; НПО Профессионал , НПО Мир и семья ; Санкт Петербург, 2003 г.) …   Словарь металлургических терминов

• density — I noun closeness, compactness, concentration, concretion, intransparency, opacity, opaqueness, palpability, solidity, thickness II index mass (weight), opacity Burton s Legal Thesaurus. William C. Burton …   Law dictionary

• density — c.1600, from Fr. densité (16c.), from O.Fr. dempsité (13c.), from L. densitas thickness, from densus thick, dense (see DENSE (Cf. dense)) …   Etymology dictionary

• density — [n] bulk, mass body, closeness, compactness, concretion, consistency, crowdedness, denseness, frequency, heaviness, impenetrability, massiveness, quantity, solidity, substantiality, thickness, tightness; concept 722 Ant. openness, sparsity,… …   New thesaurus

• density — ► NOUN (pl. densities) 1) the degree of compactness of a substance; mass per unit volume. 2) the quantity of people or things in a given area or space …   English terms dictionary