Serial Vector Format

Serial Vector Format (SVF) is a vector exchange format, designed to enable transfer of boundary scan vectors between tools. SVF is expressing test patterns that represent the stimulus, expected response, and mask data for IEEE 1149.1-based tests.

The SVF file is defined as an ASCII file that consists of a set of SVF statements. The maximum number of characters allowed on a line is 256, although one SVF statement can span more than one line. Each statement consists of a command and associated parameters. Each SVF statement is terminated by a semicolon. SVF is not case sensitive. Comments can be inserted into a SVF file after an exclamation point ‘!’ or a pair of slashes ‘//’. Either ‘//’ or ‘!’ will comment out the remainder of the line.

SVF Commands

* ENDDR: Specifies default end state for DR scan operations.
* ENDIR: Specifies default end state for IR scan operations.
* FREQUENCY: Specifies maximum test clock frequency for IEEE 1149.1 bus operations.
* HDR: (Header Data Register) Specifies a header pattern that is prepended to the beginning of subsequent DR scan operations.
* HIR: (Header Instruction Register) Specifies a header pattern that is prepended to the beginning of subsequent IR scan operations.
* PIO: (Parallel Input/Output) Specifies a parallel test pattern.
* PIO

* RUNTEST: Forces the IEEE 1149.1 bus to a run state for a specified number of clocks or a specified time period.
* SDR: (Scan Data Register) Performs an IEEE 1149.1 Data Register scan.
* SIR: (Scan Instruction Register) Performs an IEEE 1149.1 Instruction Register scan.
* STATE: Forces the IEEE 1149.1 bus to a specified stable state.
* TDR: (Trailer Data Register) Specifies a trailer pattern that is appended to the end of subsequent DR scan operations.
* TIR: (Trailer Instruction Register) Specifies a trailer pattern that is appended to the end of subsequent IR scan operations.
* TRST: (Test ReSeT) Controls the optional Test Reset line.

External links

* [http://www.jtagtest.com/jtag-standards JTAG Standards]