- Digital Enhanced Cordless Telecommunications
Digital Enhanced Cordless Telecommunications (Digital European Cordless Telecommunications), usually known by the acronym DECT, is a digital communication standard, which is primarily used for creating cordless phone systems. It originated in Europe, where it is the universal standard, replacing earlier cordless phone standards, such as 900 MHz CT1 and CT2.
Beyond Europe, it has been adopted by Australia, and most countries in Asia and South America. North American adoption was delayed by United States radio frequency regulations. This forced development of a variation of DECT, called DECT 6.0, using a slightly different frequency range; the technology is nearly identical, but the frequency difference makes the technology incompatible with systems in other areas, even from the same manufacturer. DECT has almost universally replaced other standards in most countries where it is used, with the exception of North America.
DECT is used primarily in home and small office systems, but is also available in many PBX systems for medium and large businesses. DECT can also be used for purposes other than cordless phones. Voice applications, such as baby monitors, are becoming common. Data applications also exist, but have been eclipsed by Wi-Fi. 3G cellular also competes with both DECT and Wi-Fi for both voice and data. Nowadays you can find DECT as well in special applications like Remote Controls for industrial applications.
In January 2011 a low power variant (DECT ULE - ultra low energy) was discussed at the DECT World and CAT-iq Conference with a whitepaper presented by Sitel (Now Dialog) Semiconductor. The first successful interoperability tests were announced by the DECT Forum in June 2011. And in September 2011 Dialog Semiconductor announced the first commercially availalable DECT ULE devices. Unlike standard DECT, the low power variant enables this standard to be used in battery powered devices such as smartphone app controllable home automation or security systems.
DECT handsets and bases from different manufacturers typically work together at the most basic level of functionality: making and receiving calls. The DECT standard includes a standardized interoperability profile for simple telephone capabilities, called GAP, which most manufacturers implement. The standard also contains several other interoperability profiles, for data and for radio local-loop services.
The DECT standard fully specifies a means for a portable unit, such as a cordless telephone, to access a fixed telecoms network via radio. But, unlike the GSM standards, does not specify any internal aspects of the fixed network itself. Connectivity to the fixed network (which may be of many different kinds) is done through a base station or "Radio Fixed Part" to terminate the radio link, and a gateway to connect calls to the fixed network. In most cases the gateway connection is to the public switched telephone network or telephone jack, although connectivity with newer technologies such as Voice over IP has become available. There are also other devices such as some baby monitors utilizing DECT, and in these devices there is no gateway functionality.
The DECT standard originally envisaged three major areas of application:
- Domestic cordless telephony, using a single base station to connect one or more handsets to the public telecoms network.
- Enterprise premises cordless PABXs and wireless LANs, using many base stations for coverage. Calls continue as users move between different coverage cells, through a mechanism called handover. Calls can be both within the system and to the public telecoms network.
- Public access, using large numbers of base stations to provide high capacity building or urban area coverage as part of a public telecoms network.
Of these, the domestic application (cordless home telephones) has been extremely successful. The enterprise PABX market had some success, and all the major PABX vendors have offered DECT access options. The public access application did not succeed, since public cellular networks rapidly out-competed DECT by coupling their ubiquitous coverage with large increases in capacity and continuously falling costs. There has been only one major installation of DECT for public access: in early 1998 Telecom Italia launched a DECT network known as "Fido" after much regulatory delay, covering major cities in Italy. The service was promoted for only a few months and, having peaked at 142,000 subscribers, was shut down in 2001.
DECT has also been used for Fixed Wireless Access as a substitute for copper pairs in the "last mile" in countries such as India and South Africa. By using directional antennas and sacrificing some traffic capacity, cell coverage could extend to over 10 km. In Europe the power limit laid down for use of the DECT spectrum (250 mW peak) was expressed in ERP, rather than the more commonly-used EIRP, permitting the use of high-gain directional antennas to produce much higher EIRP and hence long ranges.
The standard is also used in electronic cash terminals, traffic lights, and remote door openers.
The "6.0" in DECT 6.0 does not specify a spectrum band, but is a marketing term coined by Siemens, for DECT devices manufactured for use in the U.S. and Canada. Although DECT 6.0 operates at 1.9 GHz, Siemens decided the term DECT 1.9 might have confused customers who equate larger numbers (such as the 2.4 and 5.8 in existing 2.4 GHz and 5.8 GHz cordless telephones) with later products. The DECT and DECT 6.0 technologies are essentially identical, except for operating frequency.
The term DECT 6.0 is also used in Australia .
In business, DECT has become an essential part of many PABX installations with manufacturer's proprietary methods of supporting PABX features over the DECT standard. Since the onset of the migration from TDM PBXs to VoIP and VoIP hybrid solutions, manufacturers such as Lantiq, Ascom Wireless Solutions, Aastra Technologies, Philips, and Polycom have developed IP-DECT solutions where the backhaul from the base station is VoIP (H.323 or SIP) while the handset loop is still DECT. These solutions are sometimes restricted by the cost of the base station but may be economical where the concentration of users is high. PBX networking vendors such as Cisco promote the adoption of handsets that use VoIP over local Wifi as the replacement for DECT, but this imposes significant overhead on the design and complexity of the WiFi network in order to provide roaming, coverage and reservation of bandwidth, not to mention quality of service. However, this avoids the need for a separate DECT radio network. Other potential competitors for office installations include the Personal Handy-phone System (popular in Asia), and the use of private calls in a local microcell (using a cellular phone technology).
The latest DECT variant is DECT ULE, or DECT Ultra low energy. The standard was first discussed in January 2011 and the first commercial products were launched later that year by Dialog Semiconductor. Like DECT, DECT ULE standard uses the 1.9GHz band so suffers less interference than Zigbee, Bluetooth or WiFi, which all run on 2.4GHz.
The standard has been created to enable home automation, security, healthcare and energy monitoring applications that are battery powered and can easily connect to the web using the large number of existing DECT enabled modems and be managed using a smartphone app.
Technical development and adoption
The DECT standard was developed by ETSI in several phases, the first of which took place between 1988 and 1992 when the first round of standards were published. These were the ETS 300-175 series in 9 parts defining the air interface, and ETS 300-176 defining how the units should be type approved. A technical report, ETR-178, was also published to explain the standard. Subsequent standards were developed and published by ETSI to cover interoperability profiles and standards for testing.
Initially named "Digital European Cordless Telephone" at its launch by CEPT in November 1987, following a suggestion by Enrico Tosato of Italy, its name was soon changed to "Digital European Cordless Telecommunications" to reflect its broader range of application, including data services. In 1995, due to its more global usage, the name was changed from "European" to "Enhanced." It is an ETSI standard for digital portable phones (cordless home telephones), commonly used for domestic or corporate purposes. It is recognised by the ITU as fulfilling the IMT-2000 requirements and thus qualifies as a 3G system. Within the IMT-2000 group of technologies, DECT is referred to as IMT-2000 Frequency Time (IMT-FT)
DECT was developed by ETSI but has since been adopted by many countries all over the world. The original DECT frequency band (1880 MHz–1900 MHz) is used in all countries in Europe. Outside Europe, it is used in most of Asia, Australia and South America. In the United States, the Federal Communications Commission in 2005 changed channelization and licensing costs in a nearby band (1920 MHz–1930 MHz, or 1.9 GHz), known as Unlicensed Personal Communications Services (UPCS), allowing DECT devices to be sold in the U.S. with only minimal changes. These channels are reserved exclusively for voice communication applications and therefore are less likely to experience interference from other wireless devices such as baby monitors and wireless networks.
Typical abilities of a domestic DECT Generic Access Profile (GAP) system include:
- Multiple handsets to one base station and one phone line socket. This allows several cordless telephones to be placed around the house, all operating from the same telephone jack. Additional handsets have a battery charger station which does not plug into the telephone system. Handsets can in many cases be used as intercoms, communicating between each other, and sometimes as walkie-talkies, intercommunicating without telephone line connection.
- Interference-free wireless operation to around 100 metres (109 yards) outdoors, much less indoors when separated by walls. Operates clearly in common congested domestic radio traffic situations, for instance, generally immune to interference from other DECT systems, Wi-Fi networks, video senders, Bluetooth technology, baby monitors and other wireless devices.
- Talk-time of several hours and standby time of several days on one battery charge.
Some systems offer:
- A longer range between the telephone and base station (usable further from the base)
- Extended battery talk-time, sometimes up to 24 hours
Some DECT properties:
- Audio codec: G.726, G.711, G.722 (wideband), G.729.1 (wideband) and MPEG-4 ER LD AAC (wideband and super-wideband)
- Net bit rate: 32 kbit/s
- Frequency: 1880 MHz–1900 MHz in Europe, 1900 MHz-1920 MHz in China,1893 MHz–1906 MHz in Japan, 1910 MHz-1930 MHz in Latin America and 1920 MHz–1930 MHz in the US and Canada, US DECT and DECT 6 products may NOT be used in the UK as they cause and suffer from interference with the UK 3G cellular networks with unlicensed use of such products being prohibited by UK agencies. As DECT and DECT 6.0 do not operate in the 2.4 GHz ISM band, they are not subject to the interference arising in this band from its use by 802.11b and 802.11g WiFi, and 2.4 GHz cordless phones.
- Carriers: 10 (1,728 MHz spacing) in Europe, 5 (1,728 MHz spacing) in the US
- Time slots: 2 x 12 (up and down stream)
- Channel allocation: dynamic
- Average transmission power: 10 mW (250 mW peak) in Europe, 4 mW (100 mW peak) in the US
The DECT physical layer uses:
- Frequency division multiple access (FDMA),
- Time division multiple access (TDMA) and
- Time division duplex (TDD)
This means that the radio spectrum is divided into physical channels in two dimensions: frequency and time.
The maximum allowed power for portable equipment as well as base stations is 250 mW. A portable device radiates an average of about 10 mW during a call as it is only using one of 24 time slots to transmit.
The DECT network layer always contains the following protocol entities:
- Call Control (CC)
- Mobility Management (MM)
Optionally it may also contain others:
- Call Independent Supplementary Services (CISS)
- Connection Oriented Message Service (COMS)
- Connectionless Message Service (CLMS)
All these communicate through a Link Control Entity (LCE).
The call control protocol is derived from ISDN DSS1, which is a Q.931 derived protocol. Many DECT-specific changes have been made.[specify] The mobility management protocol includes many elements similar to the GSM protocol, but also includes elements unique to DECT.
Unlike the GSM protocol, the DECT network specifications do not define cross-linkages between the operation of the entities (for example, Mobility Management and Call Control). The architecture presumes that such linkages will be designed into the interworking unit that connects the DECT access network to whatever mobility-enabled fixed network is involved. By keeping the entities separate, the handset is capable of responding to any combination of entity traffic, and this creates great flexibility in fixed nework design without breaking full interoperability.
DECT GAP is an interoperability profile for DECT. The intent is that two different products from different manufacturers that both conform not only to the DECT standard, but also to the GAP profile defined within the DECT standard, are able to interoperate for basic calling. The DECT standard includes full testing suites for GAP, and GAP products on the market from different manufacturers are in practice interoperable for the basic functions.
The DECT media access control layer also provides encryption services with the DECT Standard Cipher (DSC). The encryption is fairly weak, using a 35-bit initialization vector and encrypting the voice stream with 64-bit encryption.
The security algorithm has been broken. Another attack involves impersonating a DECT base station, which allows calls to be listened to, recorded, and re-routed to a different destination.
DECT for data networks
Other interoperability profiles exist in the DECT suite of standards, and in particular the DPRS (DECT Packet Radio Services) bring together a number of prior interoperability profiles for the use of DECT as a wireless LAN and wireless internet access service. With good range (up to 200 m indoors and 6 km using directional antennae outdoors), dedicated spectrum, high interference immunity, open interoperability and data speeds of around 500 kbit/s, DECT appeared at one time to be a superior alternative to Wi-Fi. The protocol capabilities built into the DECT networking protocol standards were particularly good at supporting fast roaming in the public space, between hotspots operated by competing but connected providers. The first DECT product to reach the market, Olivetti's Net3, was a wireless LAN, and German firms Dosch & Amand and Hoeft & Wessel built niche businesses on the supply of data transmission systems based on DECT.
However, the timing of the availability of DECT, in the mid 1990s, was too early to find wide application for wireless data outside niche industrial applications. Whilst contemporary providers of Wi-Fi struggled with the same issues, providers of DECT retreated to the more immediately lucrative market for cordless telephones. A key weakness was also the inaccessibility of the U.S. market, due to FCC spectrum restrictions at that time. By the time mass applications for wireless Internet had emerged, and the U.S. had opened up to DECT, well into the new century, the industry had moved far ahead in terms of performance and DECT's time as a wireless data transport had passed.
DECT operates in the 1880–1900 MHz band and defines ten channels from 1881.792 MHz to 1897.344 MHz with a band gap of 1728 kHz. Each base station frame provides 12 duplex speech channels, with each time slot occupying any channel. DECT operates in multicarrier/TDMA/TDD structure. DECT also provides Frequency-hopping spread spectrum over TDMA/TDD structure. If frequency-hopping is avoided, each base station can provide up to 120 channels in the DECT spectrum before frequency reuse. Each time slot can be assigned to a different channel in order to exploit advantages of frequency-hopping and to avoid interference from other users in asynchronous fashion.
XDECT R is a Uniden technology for extending the range of DECT phones (apparently indefinitely) by using multiple repeater stations. The company has demonstrated the technology to a 2.2 kilometre range in Australia. XDECTR is not a "technology" but a marketing term used by Uniden to differentate their products for the consumer.
Health and safety
DECT is a microwave technology, with science similar to mobile phones, baby monitors, Wi-Fi, and other cordless telephone technologies. As with all such technologies, consensus is that there are negligible health effects from very low levels of microwave radiation. Most studies have been unable to discount any link to health effects, or have been inconclusive. Nevertheless, there has been persistent controversy over their health safety, and some national and international agencies have made specific recommendations about exposure. 
- Generic access profile (GAP)
- GSM Interworking Profile (GIP)
- Unlicensed Personal Communications Services
- Wireless local loop
- CT2 (DECT's predecessor)
- Cordless telephone
- Tuttlebee, Wally H.W. (1996). Cordless Telecommunications Worldwide. Springer. ISBN 978-3540199700.
- Phillips, John A.; Mac Namee, Gerard (1998). Personal Wireless Communication with DECT and PWT. Artech. ISBN 978-0890068724.
- Prof. Dr. W. Kowalk (2007-03-13). "Rechnernetze – The DECT Standard". http://einstein.informatik.uni-oldenburg.de/rechnernetze/seite24.htm. Retrieved 2008-12-29. A summary of the DECT standard.
- ^ "DECT Information". http://www2.rohde-schwarz.com/en/technologies/Wireless_Connectivity/DECT/information/.
- ^ "Digital Enhanced Cordless Telecommunications (DECT); A high level guide to the DECT standardization". ETR 178. European Telecommunications Standards Institute. 1997. http://pda.etsi.org/pda/AQuery.asp?qSEARCH_STRING=ETR+178&qSEARCH_Type=EXACT&submit1=Search&qNB_TO_DISPLAY=10&qOFFSET=0&qSORT=DEFAULT. Retrieved 2010-09-23.
- ^ "Dect for Cordless Terminal Mobility" DECT Forum Newsletter 6th March 1998 
- ^ "LA TELECOM SPEGNE "FIDO"" Il Messaggero 5th April 2000
- ^ https://dedected.org/trac/raw-attachment/wiki/25C3/talk-25c3.pdf
- ^ http://shop.bigpond.com/ProductSearch.asp?Action=HeaderSearch&ProductName=dect+6.0 accessed on October 11 2011
- ^ "Serious security vulnerabilities in DECT wireless telephony". Heise. 2008-12-29. http://www.heise-online.co.uk/security/25C3-Serious-security-vulnerabilities-in-DECT-wireless-telephony--/news/112326.
- ^ a b Schuler, Andreas; Tews, Erik; Weinmann, Ralf-Philipp (2008-12-29). deDECTed.org. https://dedected.org/cgi-bin/trac.cgi/attachment/wiki/25C3/talk-25c3.pdf?format=raw.
- ^ Nohl, Karsten; Tews, Erik; Weinmann, Ralf-Philipp (2010-04-04). "Cryptanalysis of the DECT Standard Cipher". https://dedected.org/trac/attachment/wiki/DSC-Analysis/FSE2010-166.pdf.
- ^ "Wireless LANs: developments in technology and standards". IEE Journal of Computing and Control Engineering. 1994-10. http://scitation.aip.org/vsearch/servlet/VerityServlet?KEY=CCEJEL&smode=strresults&sort=chron&maxdisp=25&threshold=0&possible1=flatman&possible1zone=article&OUTLOG=NO&viewabs=CCEJEL&key=DISPLAY&docID=1&page=1&chapter=0.
- ^ Uniden Press release http://www.uniden.com.au/new_zealand/n_news.asp?page=1#Signal%20loud%20and%20clear%20from%20Bondi%20to%20Bronte
- ^ http://www.uniden.com.au/AUSTRALIA/XDECTR_RangeTestPopUp.html
- ^ "What are the health risks associated with mobile phones and their base stations?". Online Q&A. World Health Organization. 2005-12-05. http://www.who.int/features/qa/30/en. Retrieved 2008-01-19.
- ^ http://www.i-sis.org.uk/cordlessPhonesBrainTumours.php
- DECT Forum at dect.org
- DECT information at ETSI
- DECT reaches a New Generation at dect.org
- Open source implementation of a DECT stack
Internet access Network type Wired Wireless Optical Coaxial cable Twisted pair Phone line Power line Unlicensed terrestrial bands Licensed terrestrial bands Satellite LAN Ethernet G.hn · MoCA · HomePNA Ethernet HomePNA · G.hn G.hn · HomePlug Wi-Fi · Bluetooth · DECT · Wireless USB WAN PON · Ethernet DOCSIS Ethernet Dial-up · ISDN · DSL Power line Muni Wi-Fi GPRS · iBurst · WiBro/WiMAX · UMTS-TDD, HSPA · EVDO · LTE · MMDS Satellite
Wikimedia Foundation. 2010.
Look at other dictionaries:
Digital Enhanced Cordless Telecommunications — (DECT, Digitale, verbesserte schnurlose Telekommunikation; bis 1995 Digital European Cordless Telephony) ist ein Standard für Schnurlostelefone sowie für kabellose Datenübertragung im Allgemeinen. DECT ist definiert im ETSI Standard EN 300… … Deutsch Wikipedia
Wideband Digital Enhanced Cordless Telecommunications — Wideband Digital Enhanced Cordless Telecommunications, or simply WDECT, in mobile telephone technology, is similar to Digital Enhanced Cordless Telecommunications (DECT), except that it is a frequency hopping protocol. The protocol will jump… … Wikipedia
D.E.C.T. (sigle anglais Digital Enhanced Cordless Telecommunications) — ● D.E.C.T. (sigle anglais Digital Enhanced Cordless Telecommunications) Norme européenne de transmission radio numérique pour la téléphonie mobile ou fixe … Encyclopédie Universelle
Digital Enhanced Cordless Telephone — Téléphone DECT Digital Enhanced Cordless Telephone abrégé en DECT (Téléphone sans fil numérique amélioré), anciennement Digital European Cordless Telephone, est une norme de téléphonie sans fil numérique destinée aux particuliers comme aux … Wikipédia en Français
Digital Ehanced Cordless Telephone — Digital Enhanced Cordless Telephone Téléphone DECT Digital Enhanced Cordless Telephone abrégé en DECT (Téléphone sans fil numérique amélioré), anciennement Digital European Cordless Telephone, est une norme de téléphonie sans fil … Wikipédia en Français
Digital European Cordless Telephone — Digital Enhanced Cordless Telephone Téléphone DECT Digital Enhanced Cordless Telephone abrégé en DECT (Téléphone sans fil numérique amélioré), anciennement Digital European Cordless Telephone, est une norme de téléphonie sans fil … Wikipédia en Français
Cordless telephone — A cordless telephone with base. A cordless telephone or portable telephone is a telephone with a wireless handset that communicates via radio waves with a base station connected to a fixed telephone line, usually within a limited range of its… … Wikipedia
Cordless Telephone — Mobilteil eines Schnurlostelefons. Das abgebildete Telefon arbeitet nach dem neuen DECT Standard Ein Schnurlostelefon ist ein Mobilfunktelefon, dass über Radiowellen mit einer bis zu etwa 200 Meter entfernten Basisstation am Festnetz verbunden… … Deutsch Wikipedia
European Telecommunications Standards Institute — Das Europäische Institut für Telekommunikationsnormen (Kürzel ETSI; englisch: European Telecommunications Standards Institute) ist eine der drei großen Normungsorganisationen in Europa. ETSI ist ein gemeinnütziges Institut mit dem Ziel,… … Deutsch Wikipedia
Liste de sigles en télécommunications — Cette page présente quelques sigles utilisés couramment en télécommunication. Sommaire 1 Liste 2 Voir aussi 2.1 Articles connexes 2.2 Liens externes … Wikipédia en Français