Electron beam induced deposition

Electron beam induced deposition (EBID) is a process of decomposing gaseous molecules by electron beam leading to deposition of non-volatile fragments onto a nearby substrate.

Process

Focused electron beam of scanning electron microscope (SEM) or scanning transmission electron microscope (STEM) is commonly used. Focused ion beam can be applied instead, but then the process is called ion beam induced deposition (IBID). The precursor material is gas, liquid or solid. Liquid or solids are gasified prior to deposition, usually through vaporization or sublimation, and introduced, at accurately controlled rate, into the high-vacuum chamber of electron microscope. Alternatively, solid precursor is sublimated by the electron beam itself.

When deposition occurs at high temperature or involves corrosive gases, specially designed deposition chamber is used;"Microfabrication of diamond films by localized electron beam chemical vapour deposition" [http://dx.doi.org/10.1088/0268-1242/17/10/311 Semicond. Sci. Technol. 17 (2002) 1096] ] it is isolated from the microscope, and the beam is introduced into it through a micrometre-sized orifice. Small orifice size maintains differential pressure in the microscope (vacuum) and deposition chamber (no vacuum). Such deposition mode has been used for EBID of diamond.,"Electron beam activated plasma chemical vapour deposition of polycrystalline diamond films" [http://www3.interscience.wiley.com/journal/112446661/abstract Phys. Stat. Solidi (a) 151 (1995) 107] ]

The electron beam is scanned over desired shape resulting in deposition of material. The scanning is usually computer controlled. The deposition rate depends on the partial pressure and is of the order 10 nm/s."Focused, Nanoscale Electron-Beam-Induced Deposition and Etching" [http://dx.doi.org/10.1080/10408430600930438 Critical Reviews of Solid State and Materials Sciences 31 (2006) 55] ]

Deposition mechanism

SEM or STEM electrons have energy too high (typically between 10 and 300 keV) to efficiently break molecular bonds. Therefore decomposition occurs via a two-step process: any materials (substrate, holders or the material that has already been deposited) near the deposition spot absorb primary electrons and re-emit secondary electrons having a wide spectrum of energies (of the order 1 keV) and angles. Secondary electrons decompose the precursor molecules.,"Nanofabrication by advanced electron microscopy using intense and focused beam" [http://dx.doi.org/10.1088/1468-6996/9/1/014110 Sci. Technol. Adv. Mater. 9 No 1 (2008) 014110] , "Fabrication and characterization of nanostructures on insulator substrates by electron-beam-induced deposition" [http://dx.doi.org/10.1088/1468-6996/9/2/023002 Sci. Technol. Adv. Mater. 9 No 2 (2008) 023002] "(free-download reviews)"]

patial resolution

Primary STEM electrons can be focused into spots as small as 0.07 nm or even less."Present status and future prospects of spherical aberration corrected TEM/STEM for study of nanomaterials" [http://dx.doi.org/10.1088/1468-6996/9/1/014111 Sci. Technol. Adv. Mater. 9 No 1 (2008) 014111] "(free-download review)"] However, the smallest structures deposited so far by EBID are dots of ~0.7 nm diameter."Approaching the Resolution Limit of Nanometer-Scale Electron Beam-Induced Deposition" [http://dx.doi.org/10.1021%2Fnl050522i Nanoletters 5 (2005) 1303] ] The reason for reduced resolution is wide angular range of secondary electrons, and there is no straightforward way to overcome this problem.

Materials and precursors

The range of materials deposited by EBID currently (sept. 2008) includes Al, Au, amorphous carbon, diamond, Co, Cr, Cu, Fe, GaAs, GaN, Ge, Mo, Nb, Ni, Os, Pd, Pt, Rh, Ru, Re, Si, Si₃N₄, SiO_x, TiO_x, W, and is being expanded. The limiting factor is availability of appropriate precursors, gaseous or having low sublimation temperature.

The most popular precursors for deposition of elemental solids are metal carbonyls of Me(CO)_x structure or metallocenes. They are easily available, but produce carbon contamination.,"Low temperature electrical characterisation of tungsten nano-wires fabricated by electron and ion beam induced chemical vapour deposition" [http://dx.doi.org/10.1016/j.tsf.2007.02.029 Thin Sol. Films 515 (2007) 6791] ] Metal-halogen complexes (WF₆, etc.) result in cleaner deposition, but they are toxic and corrosive. Compound materials are deposited from specially crafted, exotic gases, e.g. D₂GaN₃ for GaN.

Advantages

*Deposition occurs in high-vacuum chamber of electron microscope and therefore is rather clean. *Size of the produced structures and accuracy of deposition is unprecedented.
*The deposited material can be characterized using the electron microscopy techniques (TEM, EELS, EDS, electron diffraction) during or right after deposition. In situ electrical and optical characterization is also possible.

Disadvantages

*Complexity of the setup and process limits mass production

Ion Beam Induced Deposition

Ion Beam Induced Deposition (IBID) is very similar to EBIC with the major difference that focused ion beam, usually 30 keV Ga⁺, is used instead of the electron beam. In both techniques, it is not the primary beam, but secondary electrons which cause the deposition. IBID has the following disadvantages as compared to EBID:
*Angular spread of secondary electrons is larger in IBID thus resulting in lower spatial resolution.
*Ga⁺ ions introduce additional contamination and radiation damage to the deposited structure, which is important for electronic applications.
*Deposition occurs in a focused ion beam (FIB) setup, which strongly limits characterization of the deposit during or right after the deposition. Only SEM-like imaging using secondary electrons is possible, and even that is imaging is restricted to short observations due to sample damaging by the Ga⁺ beam.

hapes

Nanostructures of virtually any 3-dimensional shape can be deposited using computer-controlled scanning of electron beam. Only the starting point has to be attached to the substrate, the rest of the structure can be free standing. The achieved shapes and devices are remarkable:
*World smallest magnet
*Fractal nanotrees
*Nanoloops (potential nanoSQUID device)
*Superconducting nanowires

ee also

*Electron microscopy
*Focused ion beam
*Metal carbonyl
*Metallocene
*Organometallic chemistry
*Scanning electron microscope
*Scanning transmission electron microscopy
*Transmission electron microscopy

References

Books and On-line documents

* "Nanofabrication: Fundamentals and Applications" Ed.: Ampere A. Tseng, World Scientific Publishing Company (March 4, 2008), ISBN-10: 9812700765 , ISBN-13: 978-9812700766
* [http://kristian.molhave.dk/thesis/phd/MolhavePhDThesisVer6.pdf K. Molhave: "Tools for in-situ manipulations and characterization of nanostructures", PhD thesis, Technical University of Denmark, 2004]

External links

* [http://www.nims.go.jp/hvems/nano_char/researchtopics/topic4/E-topic4.html NIMS EBID page]
* [http://www.febip.info/ Information source for people active in the field of Focused Electron Beam Induced Processes]
* [http://en.wikibooks.org/wiki/Nanotechnology/EBID/ Wikibook on EBID]