Metalloid

Metalloid
  13 14 15 16 17  
2  B
Boron
C
Carbon
N
Nitrogen
O
Oxygen
F
Fluorine
3  Al*
Aluminium
Si
Silicon
P
Phosphorus
S
Sulfur
Cl
Chlorine
4  Ga
Gallium
Ge
Germanium
As
Arsenic
Se
Selenium
Br
Bromine
5  In
Indium
Sn
Tin
Sb
Antimony
Te
Tellurium
I
Iodine
6  Tl
Thallium
Pb
Lead
Bi
Bismuth
Po*
Polonium
At*
Astatine
 Common *The metalloid status of Al, Po and At is disputed.
 Less common
 Uncommon
 Rare
Indicative (relative) frequency with which some elements appear in metalloid lists. Frequencies are from the list of metalloid lists and occur in a more or less geometric progression of clusters. The common elements have appearance frequencies clustering around the low 90s; 'less common' elements appear half as often (clustering around ~45 per cent); and the single 'uncommon' representative (Se) and the following cluster of 'rare' elements have appearance frequencies each around half that of their immediate precursors. The series continues with the still less frequently appearing elements but this is not shown above on account of the relatively small sample size.

The grey stair step is a typical example of the arbitrary dividing line between metals and nonmetals that can be found on some periodic tables. That germanium, if classified as a non-metal, then appears to fall on the wrong side of the metal-nonmetal divide, is an outcome of the publicity this form of the line received in the late 1920s and early 30s, and the view (held up to at least the late 1930s) that germanium was a poorly conducting metal.[1]

Metalloid is a term used in chemistry when classifying the chemical elements. On the basis of their general physical and chemical properties, each element can usually be classified as a metal or a nonmetal. However, some elements with intermediate[2] or mixed[3] properties can be harder to characterize.[4][5][n 1] These elements are sometimes classified as metalloids, from the Latin metallum = "metal" and the Greek oeides = "resembling in form or appearance".[9][10] They have been described as forming a (fuzzy) buffer zone between metals and nonmetals, the make-up and size of which depends on the applicable classification criteria.[n 2]

The terms amphoteric element,[20][21] half-metal,[22][23] half-way element,[24] near metal,[25] semiconductor[26] and semimetal[27] are sometimes used synonymously however most of these terms have other meanings, which may not be interchangeable:

  • 'amphoteric element' is sometimes used more broadly to include transition metals capable of forming oxyanions, such as chromium and manganese;[28]
  • 'half-metal' is sometimes instead used to refer to the poor metals;[29] it also has an unrelated meaning, in physics, of a compound (such as chromium dioxide) or alloy capable of acting as a conductor and an insulator;
  • 'semimetal' is used to refer, more or less frequently and definitively, to metals with incomplete metallic character in crystalline structure, electrical conductivity or electronic structure—examples include gallium,[30][31][32] ytterbium,[33][34][35] bismuth[36] and neptunium.[37][38]

In addition, some elements otherwise referred to as metalloids are not known to exhibit marked amphoteric behaviour, or exhibit semiconductivity in their most stable forms.

Metalloids are generally regarded as a third classification of chemical elements, alongside metals and nonmetals.[39] On some occasions they have instead been grouped with the metals,[25][40] regarded as nonmetals[41] or treated as a sub-category of same.[42][43][44][45][46][n 3]

Contents

Properties

There is no universally agreed or rigorous definition of the term[48][49] metalloid and the classification of any particular element as such has been described as 'arbitrary'.[50]

Notwithstanding, properties associated with metalloids are set out in the following two tables, alongside (and in comparison to) those of metals and non-metals.[51] Shading to either side of the metalloids column denotes immediately apparent commonalties.

Physical

Property Metals Metalloids Non-metals
Form solid; a few liquid at or near room temperature (Ga, Hg, Cs, Fr)[52][53] solid[54] mostly gases[55]
Appearance characteristic lustre metallic lustre[54] colourless; red, yellow, green, black, or intermediate shades[56]
Allotropy many show metallic allotropes; Bi, Sn have semiconducting allotropes tend to exist in several (conspicuously)[57] 'metallic' and non-metallic allotropic forms[58] show non-metallic allotropy (O, S), with elements close to the metal-non-metal line (C, P, Se) showing more 'metallic' allotropes
Density generally high, with some exceptions such as the alkali metals[59] densities lower than neighbouring poor metals but higher than those of neighbouring nonmetals[46] often low
Elasticity typically elastic, ductile, malleable (when solid) brittle[60] brittle (when solid)
Electrical conductivity good to high[n 4] intermediate[63] to good[n 5] poor to intermediate[n 6]
Thermal conductivity medium to high[71] mostly intermediate;[60][72] Si is high almost negligible[73] to very high[74]
Packing close-packed crystal structures; high coordination numbers have relatively open crystal structures, with medium coordination numbers,[75] in contrast to the close-packed crystal structures of metals[76] low coordination numbers
Melting behaviour volume generally expands[77] some contract, unlike (most)[78] metals[79] volume generally expands[77]
Enthalpy of fusion may be high often have abnormally high enthalpy of fusion values[80] (compared to other close-packed metals)[81] often low
Liquid electrical conductivity[82] metallic most exhibit metallic conductivity in liquid form[83][84] non-metallic
Band structure metallic (Bi = semimetallic) are semiconductors or, if not (As, Sb = semimetallic), exist in semiconducting forms[44][85] semiconductor or insulator[86]
Electron behaviour "free" electrons valence electrons not as freely delocalized as in metals; considerable covalent bonding present[87]
have Goldhammer-Herzfeld criterion[n 7] ratios straddling unity[83][92]
no "free" electrons

Chemical

Property Metals Metalloids Non-metals
General behaviour metallic non-metallic[93] non-metallic
Ionization energy relatively low intermediate ionization energies,[94] usually falling between those of metals and nonmetals[95] high
Electronegativity low have electronegativity values close to 2[96] (revised Pauling scale) or within the narrow range of 1.9–2.2 (Allen scale)[97] high
Ion formation tend to form cations have a reduced tendency to form anions in water, when compared to ordinary nonmetals[98]
solution chemistry is dominated by the formation and reactions of oxyanions[99][100]
tend to form anions
Bonds seldom form covalent can form salts as well as covalent compounds[101] form many covalent
Oxidation number nearly always positive positive or negative[102] positive or negative
+Metals give alloys can form alloys[58][101][103] ionic or interstitial compounds formed
Oxides lower oxides are ionic and basic
higher oxides are increasingly covalent and acidic
very few glass formers[104]
polymeric in structure;[105] tend to be amphoteric or weakly acidic[54][106]
are glass formers (B, Si, Ge, As, Sb, Te)[107]
covalent, acidic
few glass formers (P, S, Se)[108]
Halides, esp. chlorides ionic
water soluble (not hydrolysed)
covalent, volatile[109][110]
some partly reversibly hydrolysed[111]
covalent
hydrolysed by water
Hydrides active metals form ionic, solid hydrides with high melting points;
transition metals form metallic hydrides;
poor metals form covalent hydrides
covalent, volatile hydrides[112] covalent, gaseous or liquid hydrides
Organometallic compounds many form such can form[113] not formed

Distinctive

Of the above physical and chemical properties, brittleness[114][115] or semiconductivity[116] or both[117] have been cited or used as singularly distinguishing indicators of metalloid status. Metallic lustre together with very marked dualistic chemical behaviour—by way of, for example, amphoteric oxides—has also been cited as a benchmark criterion.[118]

Although metalloids are all reckoned to be solid[119] as well as showing metallic lustre, their other properties vary from element to element.[120] Noting metallic character is a combination of several properties, Hawkes[49] suggests judging metalloid status separately for each element, based on the extent to which they exhibit the properties relevant to such status.

The concepts of metalloid and semiconductor should not be confused. 'Metalloid' is chemistry-based concept referring to the physical (including electronic) and chemical properties of certain elements in relation to the periodic table. 'Semiconductor' is a physics-based concept referring to the electronic properties of materials (including elements and compounds).[121] Not all elements classified in the literature as metalloids necessarily exhibit semiconductivity, although most do.[122]

Applicable elements

Variability

There is no universally agreed or rigorous definition of the term metalloid. Accordingly, the answer to the question "Which elements are metalloids?" can vary, depending on the author and their inclusion criteria. Emsley,[123] for example, recognised only four metalloids: germanium, arsenic, antimony and tellurium. Selwood,[124] on the other hand, listed twelve: boron, aluminium, silicon, gallium, germanium, arsenic, tin, antimony, tellurium, bismuth, polonium, and astatine.

The absence of a standardized division of the elements into metals, metalloids and non-metals is not necessarily an issue since there is a more or less continuous progression from the metallic to the non-metallic, and any subset of this continuum can potentially serve its particular purpose as well as any other.[125]

In any event, individual metalloid classification arrangements tend to share common ground, with most variations occurring around the (indistinct)[126][127] margins.

Common metalloids

Consistent with the list of metalloid lists, the following elements are commonly classified as metalloids:[48][49][128][129][130][131]

One or more from among selenium, polonium or astatine are sometimes added to the list.[49][132][133] Boron is sometimes excluded from the list, by itself or together with silicon.[134][135] Tellurium is sometimes not regarded as a metalloid;[136] the inclusion of antimony, polonium and astatine as metalloids has also been questioned.[49][137][138]

Selenium, polonium and astatine

Selenium shows borderline metalloid or non-metal behaviour.[139][140][n 8]

Its most stable form, the grey trigonal allotrope, is sometimes called 'metallic' selenium since its electrical conductivity is several orders of magnitude greater than that of the red monoclinic form.[143] The metallic character of selenium is further indicated by its lustre;[144] its crystalline structure, which is thought to include weakly 'metallic' interchain bonding;[145] its capacity, when molten, to be drawn into thin threads;[146] its reluctance to acquire 'the high positive oxidation numbers characteristic of nonmetals';[147] and the existence of a hydrolysed cationic salt in the form of trihydroxoselenium (IV) perchlorate Se(OH)3+ClO4.[148][149]

The non-metallic character of selenium is indicated by its brittleness;[144] its band structure, which is that of a semiconductor;[149] its low electrical conductivity which, at ~10−9 to 10−12 S·cm−1 when highly purified,[67][68][150] is comparable to or less than that of bromine (7.95×10–12 S·cm−1),[151] a nonmetal; its relatively high[152] electronegativity (2.55 revised Pauling); the retention of its semiconducting properties in liquid form;[149] and its reaction chemistry, which is mainly that of its nonmetallic anionic forms Se2–, SeO2−
3
and SeO2−
4
,[153] although it shares with sulfur and tellurium the capacity to form cyclic polycations (such as Se2+
8
) when dissolved in oleums.[154]

Polonium is 'distinctly metallic' in some ways,[155] as indicated by the many salts it forms,[156] the presence of the rose-coloured Po2+ cation in aqueous solution,[157] and the metallic conductivity of both of its allotropic forms.[155] However, it also shows nonmetallic character by forming numerous metal polonides containing the Po2– anion.[158]

Astatine may be a non-metal or a metalloid;[159] it is ordinarily classified as a non-metal,[137][138][160][161] but has some 'marked' metallic properties.[162] Immediately following its production in 1940, early investigators considered it to be a metal.[163] It was subsequently described in 1949 as the most noble (difficult to reduce) non-metal as well as being a relatively noble (difficult to oxidize) metal,[164] and in 1950 as being a halogen and (therefore) an active non-metal.[165]

In terms of non-metallic indicators:

  • Batsanov gives a calculated band gap energy of 0.7 eV,[166] this being consistent with nonmetals (in physics) having separated valence and conduction bands and thereby being either semiconductors or insulators;[86][167]
  • it has the narrow liquid range ordinarily associated with non-metals,[168] given its estimated melting point of 575 K and estimated boiling point of 610 K;
  • its chemistry in aqueous solution is predominately characterised by the formation of various anionic species;[169] and
  • most of its known compounds, which include astatides (XAt), astatates (XAtO3), and monovalent interhalogen compounds, are analogous to those of iodine,[160] which is a halogen and a nonmetal.[170][171]

In terms of metallic indicators:

  • Samsonov[172] observes that, '[L]ike typical metals, it is precipitated by hydrogen sulfide even from strongly acid solutions and is displaced in a free form from sulfate solutions; it is deposited on the cathode on electrolysis.'
  • Rossler[173] cites further indications of a tendency for astatine to behave like a (heavy) metal as: '…the formation of pseudohalide compounds…complexes of astatine cations…complex anions of trivalent astatine…as well as complexes with a variety of organic solvents.'
  • Rao and Ganguly[82] note that elements with an enthalpy of vaporization (EoV) greater than ~42 kJ/mol are metallic in the liquid state. Such elements include boron,[n 9] silicon, germanium, antimony, selenium and tellurium. Vásaros & Berei[177] give estimated values for the EoV of diatomic astatine, the lowest of these being 50 kJ/mol. On this basis astatine may also be metallic in the liquid state. Diatomic iodine, with an EoV of 41.71[178] falls just short of the threshold figure.
  • Champion et al.[179] argue that astatine demonstrates cationic behaviour, in strongly acidic aqueous solutions, by way of the existence of stable At+ and AtO+ forms.

Siekierski and Burgess contend or presume that astatine would be a metal if it could form a condensed phase;[180] a visible piece of astatine would be immediately and completely vaporized due to the heat generated by its intense radioactivity.[181]

Semi-quantitative characterization

    Element
IE 
EN
 Band structure   
Boron  191    2.04   semiconductor 
  Silicon  187    1.90   same  
Germanium   182    2.01   same
  Arsenic  225    2.18   semimetal  
Antimony  198    2.05   same
  Tellurium  207    2.10   semiconductor  
average   198    2.05 
The common metalloids, and their ionization energies (kcal/mol);[182] electronegativities (revised Pauling); and electronic band structures[183][184] (most thermodynamically stable forms under ambient conditions).

Masterton and Slowinski[185] wrote that metalloids have ionization energies clustering around 200 kcal/mol, and electronegativity values close to 2.0, and that they are typically semiconductors, 'although antimony and arsenic [being semimetals in the physics-based sense] have electrical conductivities which approach those of metals.'

Their description, in terms of these three more or less clearly defined properties, encompasses the six common metalloids (see table, right).

Selenium and polonium are probably excluded from this scheme; astatine may or may not be included.[n 10]

In other quantitative terms, the common metalloids show packing efficiencies of between 34 to 41 per cent (boron 38; silicon and germanium 34; arsenic 38.5; antimony 41; tellurium 36.4).[189][190][191] These values are lower than those of most metals, more than 80 per cent of which have a packing efficiency of at least 68 per cent,[192][n 11] but higher than those of elements ostensibly classified as non-metals, such as graphite (17 per cent),[195] sulphur (19.2),[196] iodine (23.9),[196] selenium (24.2),[196] and black phosphorus (28.5).[191]

The common metalloids also have Goldhammer-Herzfeld criterion ratios of between ~0.85 to 1.1 (average 1.0).[91][92]

Other metalloids

The lack of an agreed definition of a metalloid has meant that hydrogen,[197][198][199] beryllium,[200] carbon,[201][202][203] nitrogen,[204] aluminium,[205][206] phosphorus,[203][207] sulfur,[203][208][209] zinc,[210] gallium,[211] tin, iodine,[204][212] lead,[213] bismuth[136] and radon[214][215][216] are occasionally classified as metalloids.[217]

The term metalloid has also been used to refer to:

  • elements that exhibit metallic lustre and electrical conductivity and that are also amphoteric, such as arsenic, antimony, vanadium, chromium, molybdenum, tungsten, tin, lead and aluminium;[218]
  • elements that are otherwise sometimes referred to as poor metals;[219] and
  • non-metallic elements (for example, nitrogen; carbon) that can form alloys with,[220][221][222] or modify the properties of,[223] metals.

Aluminium

Aluminium is ordinarily classified as a metal, given its lustre, malleability and ductility, high electrical and thermal conductivity and close-packed crystalline structure.

It does however have some properties that are unusual for a metal and, taken together,[224] these are sometimes used as a basis to classify aluminium as a metalloid:

  • its crystalline structure shows some evidence of directional bonding[225][226][227]
  • although it forms an Al3+ cation in some compounds, it bonds covalently in most others[228][229][230]
  • its oxide is amphoteric, and a conditional glass-former[108]
  • it forms anionic aluminates,[224] such behaviour being considered non-metallic in character.[231]

Stott[232] labels aluminium as weak metal, having the physical properties of a good metal but some of the chemical properties of a non-metal. Steele[233] notes the somewhat paradoxical chemical behaviour of aluminium: it resembles a weak metal with its amphoteric oxide and the covalent character of many of its compounds yet it is also a strongly electropositive metal, with a high negative electrode potential.

The notion of aluminium as a metalloid is sometimes disputed[234][235][236] on account of its many metallic properties and to emphasize that it represents an exception to the mnemonic that elements adjacent to the metal-nonmetal dividing line are metalloids.[138][n 12]

Near metalloids

The concept of a class of elements intermediate between metals and nonmetals is sometimes extended to include elements that most chemists, and related science professionals, would not ordinarily recognize as metalloids.

In 1935, Fernelius and Robey[238] included carbon, phosphorus, selenium, and iodine in such an intermediary class of elements, together with boron, silicon, arsenic, antimony, tellurium, polonium, and a placeholder for the missing element 85 (five years ahead of its production in 1940, as astatine). Germanium was excluded as it was still then regarded as a poorly conducting metal.[1]

In 1954, Szabó & Lakatos[239] included beryllium and aluminium in their list of metalloids, together with boron, silicon, germanium, arsenic, antimony, tellurium, polonium and astatine.

In 1957, Sanderson[240][n 13] included carbon, phosphorus, selenium, and iodine as part of an intermediary class of elements with 'certain metallic properties', alongside boron, silicon, arsenic, tellurium, and astatine. Germanium, antimony and polonium were counted as metals.

More recently, in 2007, Petty[244] included carbon, phosphorus, selenium, tin and bismuth in his list of metalloids, as well as boron, silicon, germanium, arsenic, antimony, tellurium, polonium and astatine.

Elements such as these, which are in the proximity of the common metalloids, and otherwise ordinarily classified as either metals or non-metals, are occasionally called, or described as, near-metalloids,[245][246] or the like.

Metals falling into this loose category—aluminium, tin and bismuth, for example—tend to show 'odd' packing structures,[247] marked covalent chemistry (molecular or polymeric),[248] and amphoteric behaviour.[249][250] They are also referred to as (chemically) weak metals,[251][252] poor metals,[253][254] post-transition metals,[255][256][n 14] or semimetals (in the aforementioned sense of metals with incomplete metallic character), classification groupings that generally cohabit the same periodic table territory but which are not necessarily mutually inclusive.

Nonmetals in this category, including carbon,[257][258] phosphorus,[259][260][261][262][263] selenium[140][264] and iodine,[265][266][267] exhibit metallic lustre, semiconducting properties (for example, intermediate electrical conductivity;[268] a relatively narrow band gap;[269][270] and light sensitivity[268]) and bonding or valence bands with delocalized character, in their most thermodynamically stable forms under ambient conditions (carbon as graphite; phosphorus as black phosphorus;[n 15] selenium as grey selenium). These elements are alternatively described as being 'near metalloidal', showing metalloidal character, or having metalloid-like or some metalloid(al) or metallic properties.

Allotropes

Some allotropes of the elements exhibit more pronounced metallic, metalloidal or non-metallic behavior than others. For example, the diamond allotrope of carbon is clearly non-metallic, but the graphite allotrope displays limited electrical conductivity more characteristic of a metalloid. Phosphorus, selenium, tin, and bismuth also have allotropes that display borderline or either metallic or non-metallic behavior.

Location and identification

Metalloids cluster on either side of the dividing line between metals and nonmetals that can be found, in varying configurations, on some periodic tables. Elements to the lower left of the line generally display increasing metallic behaviour; elements to the upper right display increasing nonmetallic behaviour. When presented as a regular stair-step, elements with the highest critical temperature for their groups (Al, Ge, Sb, Po) can be found immediately below the line.[274]

This line has been called the metal-nonmetal line,[275] the metalloid line,[276][277] the semimetal line,[278] the Zintl border [279] or the Zintl line.[280][281][n 16] The latter two terms also refer to a vertical line sometimes drawn between groups 13 and 14, which was christened by Laves in 1941,[283] and used to differentiate intermetallic compounds generally formed by group 13 elements with electropositive metals, from the salt-like compounds usually formed by elements in and to the right of group 14.[284]

References to the concept of such a dividing line between metals and non-metals appear in the literature as far back as at least 1869.[285]

In 1891, Walker published a periodic 'tabulation' with a diagonal straight line drawn between the metals and the non-metals.[286]

In 1906, Alexander Smith included a periodic table with a zigzag line separating the nonmetals from the rest of elements, in his highly influential[287] textbook, Introduction to General Inorganic Chemistry.[288]

In 1923, Horace Groves Deming, an American chemist, published short (Mendeleev style) and medium (18-column) form periodic tables each of which each included a regular stepped line separating metals from non-metals, in his textbook General Chemistry: An elementary survey.[289][n 17] Merck and Company prepared a handout form of Deming's 18-column table, in 1928, which was widely circulated in American schools and by the 1930s his table was appearing in handbooks and encyclopaedias of chemistry. It was also distributed for many years by the Sargent-Welch Scientific Company.[290][291][292]

Some authors do not classify elements bordering the metal-nonmetal dividing line as metalloids and instead note, for example, that such elements to the left of the line 'show some nonmetallic character' whereas those on the right 'show some metallic character'.[231] A binary classification can also facilitate the establishment of some simple rules for determining bond types between metals and/or nonmetals.[39]

Other authors have suggested that classifying some elements as metalloids 'emphasizes that properties change gradually rather than abruptly as one moves across or down the periodic table'.[293]

A dividing line between metals and nonmetals is sometimes replaced by two dividing lines: one between metals and metalloids; the second between metalloids and nonmetals.[293][294]

Some periodic tables distinguish elements that are metalloids in the absence of any formal dividing line between metals and non-metals. Metalloids are instead shown as occurring in a diagonal fixed band[295] or diffuse region,[296] running from upper left to lower right and centred around arsenic.

Mendeleev was of the view that, 'It is…impossible to draw a strict line of demarcation between metals and non-metals, there being many intermediate substances.'[297]

Several other sources note confusion or ambiguity as to the location of the dividing line;[298][299] suggest its apparent arbitrariness[300] provides grounds for refuting its validity;[39] and comment as to its misleading, contentious or approximate nature.[49][301][302] Deming himself noted that the line could not be drawn very accurately.[303]

Typical applications

For prevalent and speciality applications of individual metalloids see the article for each element.

Common metalloids, such as arsenic and antimony,[304] are too brittle to have any structural uses in their pure forms.

Typical applications of the common metalloids have instead encompassed: use of their oxides as glass-formers; their inclusion as alloying components or additives; and their employment as semiconductors, dopants or semiconductor constituents.

Glass formation

The oxides B2O3, SiO2, GeO2, As2O3 and Sb2O3 readily form glasses; TeO2 will also form a glass but to do so requires either a 'heroic quench rate' (to avoid the formation of the crystalline form) or the addition of an impurity.[305] These compounds have found or continue to find practical uses in chemical, domestic and industrial glassware[306][307] and optics (especially Ge and Te).[308][309]

Alloys

In 1914 Desch[310] wrote that 'certain non-metallic elements are capable of forming compounds of distinctly metallic character with metals, and these elements may therefore enter into the composition of alloys'. He associated silicon, arsenic and tellurium, in particular, with the alloy-forming elements. Phillips and Williams[311] later noted that compounds of silicon, germanium, arsenic and antimony with the poor metals, 'are probably best classed as alloys'.

Boron can form intermetallic compounds and alloys with transition metals, of the composition MnB, if n > 2.[312]

Sanderson commented that silicon 'is metalloid in nature, appearing quite metallic in its ability to alloy with metals.'[313]

Germanium forms a considerable number of alloys, most importantly with the coinage metals.[314]

Arsenic can form alloys with metals, including platinum and copper.[315]

Antimony is well known as an alloy former, as exemplified by type metal (a lead alloy with up to 25 per cent, by weight, antimony) and pewter (a tin alloy with up to 20 per cent antimony).[316]

In 1973 the US Geological Survey reported that about 18 percent of tellurium production was sold as copper tellurium alloys (40‒50 percent tellurium) and ferrotellurium (50‒58 percent tellurium).[317]

Semiconductors and electronics

All the common metalloids or their compounds have found application in the semiconductor or solid-state electronic industries.[318][319] The relative difficulty of obtaining single crystals of boron, combined with its high melting point, and the difficulty of introducing and retaining controlled impurities, have retarded its use as a semiconductor.[320][321]

Nomenclature origin and usage

Pre-1800

Ancient conceptions of metals as solid, fusible and malleable substances can be found in Plato's Timaeus (c. 360 BCE) and Aristotle’s Meteorology.[322][323]

At an early date, attempts were made by Pseudo-Geber (c. 1310), Basil Valentine[n 18] (Conclusiones), Paracelsus (1539?), and Boerhaave (Elementa Chemiæ, 1733) to adopt a system of classification which would separate the more characteristic metals from substances possessing those characteristics to a lesser degree, such as zinc, antimony, bismuth, stibnite, pyrite and galena, all of the latter then being called semi-metals or bastard metals.[325][326]

In 1735 Brandt proposed to make the presence or absence of malleability the principle of this classification and on that basis he separated mercury from the metals. The same view was adopted by Vogel (1755, Institutiones Chemiæ) and Buffon (1785, Histoire naturelle des Minéraux). Subsequently, when Braun had observed the solification of mercury by cold in 1759–60, and this had been confirmed by Hutchins and Cavendish in 1783,[327] the malleability of mercury became known, and it was included amongst the metals.[325]

The insufficiency of the distinction which had been drawn between metals and semi-metals was pointed out by Fourcroy (1789, Eleméns d’Histoire Naturalle et de Chemie, ii. 380) as being evident from the fact that

between the extreme malleability of gold and the singular fragility of arsenic, other metals presented only imperceptible gradations of this character, and because there was probably no greater difference between the malleability of gold and that of lead, which was considered to be a metal, than there was between lead and zinc, which was classed among semi-metals, while in the substances intermediate between zinc and arsenic the differences were slight.

This concept of a semi-metal, as a brittle (and thereby imperfect)[328][329] metal, was gradually discarded following the publication, in 1789, of Lavoisier's 'revolutionary'[330] Elementary Treatise on Chemistry.[331]

1800–1950s

In 1807, possibly '[in] an attempt to revive this old distinction between metals and substances resembling metals',[332] Erman and Simon suggested using the term metalloid to refer to the newly discovered elements sodium and potassium, since these were lighter than water and for that reason many chemists did not regard them as proper metals. Their suggestion was ignored by the chemical community.[48]

In 1811[48] or 1812, Berzelius referred to non-metallic elements as metalloids, in reference to their ability to form oxyanions (such as sulfur, in the form of the sulfate ion, SO2−
4
, a property likewise exhibited by many of the metals, such as chromium, by way of the chromate ion, CrO2−
4
).[333][334] The terminology of Berzelius was widely adopted[48] although it was subsequently regarded by some commentators as counterintuitive,[334] misapplied,[331] incorrect[335] or invalid.[46]

In 1825, in a revised German edition of his Textbook of Chemistry,[336][337] Berzelius subdivided the metalloids into three classes: constantly gaseous 'gazloyta' (hydrogen, nitrogen, oxygen); real metalloids (sulfur, phosphorus, carbon, boron, silicon); and salt-forming 'halogenia' (fluorine, chlorine, bromine, iodine).[338]

In 1844, Jackson[339] gives the meaning of 'metalloid' as 'like metals, but wanting some of their properties.'

In 1845, in A dictionary of science, literature and art, Berzelius' classification of the elementary bodies was represented as I. gazolytes; II. halogens; III. metalloids ('resemble the metals in certain aspects, but are in others widely different'); and IV. metals.[340]

In 1864, use of the term metalloid for non-metals was still sanctioned 'by the best authorities' although its usage as such did not always seem appropriate and the greater propriety of its application to other elements, such as arsenic, had been considered.[341]

By as early as 1866 some authors were instead using the term non-metal, rather than metalloid, to refer to non-metallic elements.[342]

In 1876, Tilden[343] protested against, 'the too common though illogical practice of giving the name metalloid to such bodies as oxygen, chlorine or fluorine' and instead divided the elements into ('basigenic') true metals, metalloids ('imperfect metals') and ('oxigenic') non-metals.

As late as 1888 the division of the elements into metals, metalloids, and non-metals, rather than metals and metalloids, was still considered to be peculiar and a potential source of confusion.[344]

Beach, writing in 1911, explained it this way:[345]

Metalloid (Gr. "metal-like"), in chemistry, any non-metallic element. There are 13, namely, sulfur, phosphorus, fluorin, chlorin, iodine, bromine, silicon, boron, carbon, nitrogen, hydrogen, oxygen, and selenium. The distinction between the metalloids and the metals is slight. The former, excepting selenium and phosphorus, do not have a "metallic" lustre; they are poorer conductors of heat and electricity, are generally not reflectors of light and not electropositive; that is, no metalloid fails of all these tests. The term seems to have been introduced into modern usage instead of non-metals for the very reason that there is no hard and fast line between metals and non-metals, so that "metal-like" or "resembling metals" is a better description of the class than the purely negative "non-metals". Originally it was applied to the non-metals which are solid at ordinary temperature.

In or around 1917, the Missouri Board of Pharmacy wrote[346] that:

A metal may be said to differ from a metalloid [that is, a nonmetal] in being an excellent conductor of heat and electricity, in reflecting light more or less powerfully and in being electropositive. A metalloid may possess one or more of these characters, but not all of them…Iodine is most commonly given as an example of a metalloid because of its metallic appearance.

During the 1920s the two meanings of the word metalloid appeared to be undergoing a transition in popularity. Writing in A Dictionary of Chemical Terms, Couch[347] defined 'metalloid' as an old, obsolescent term for 'non-metal'[n 19] whereas in Webster's New International Dictionary[348] use of the term metalloid to refer to nonmetals was noted as being the norm, with its application to elements resembling the typical metals in some way only, such as arsenic, antimony and tellurium, being recorded merely on a 'sometimes' basis.

Use of the term metalloid subsequently underwent a period of great flux up to 1940; consensus as to its application to intermediate or borderline elements did not occur until the ensuing years, between 1940 and 1960.[48]

In 1947, Pauling included a reference to metalloids in his classic[349] and influential[350] textbook, General chemistry: An introduction to descriptive chemistry and modern chemical theory. He described them as 'elements with intermediate properties…occupy[ing] a diagonal region [on the periodic table], which includes boron, silicon, germanium, arsenic, antimony, tellurium, and polonium.'[351]

In 1959 the International Union of Pure and Applied Chemistry (IUPAC) recommended that '[t]he word metalloid should not be used to denote non-metals'[352] even though it was still being used in this sense (around that time) by, for example, the French.[212]

1960–

In 1970 IUPAC further recommended abandoning the term metalloid because of its continuing inconsistent use in different languages, and suggested the terms metal, semimetal and nonmetal be used instead.[212][353] Notwithstanding this recommendation, use of the term 'metalloid' increased dramatically.[48] Google's Ngram viewer showed a fourfold increase in the use of the word 'metalloid' (as compared to 'semimetal') in the American English corpus from 1972–1983, and a sixfold increase in the British English corpus from 1976–1983;[354] the difference in usage across the English corpus is currently around 4:1 in favour of 'metalloid'.

Use of the term semimetal, rather than metalloid, has recently been discouraged on the grounds that the former term 'has a well defined and quite distinct meaning in physics'.[355] References to the term 'metalloid' as being outdated have also been described as 'nonsense' noting that 'it accurately describes these weird in-between elements'.[356]

In physics, a semimetal is an element or a compound in which the valence band marginally (rather than substantially) overlaps the conduction band resulting in only a small number of effective charge carriers.[184][357] By way of illustration, the densities of charge carriers in the elemental semimetals carbon (as graphite, in the direction of its planes), arsenic, antimony and bismuth are 3×1018 cm−3, 2 ×1020 cm−3, 5×1019 cm−3 and 3×1017 cm−3 respectively.[358] In contrast, the room-temperature concentration of electrons in metals usually exceeds 1022 cm−3.[359]

Notes

  1. ^ Not all elements with mixed or intermediate properties are necessarily hard to characterize. Gold, for example, has mixed properties but is still recognized as 'king of metals.' In addition to metallic behaviour (such as high electrical conductivity, and cation formation), gold also shows marked non-metallic behaviour in the form of the most positive electrode potential; an electronegativity of 2.54 (highest among the metals) that exceeds that of some non-metals (hydrogen 2.2; phosphorus 2.19; radon 2.2); the most negative electron affinity; and the highest ionization energy (but for zinc and mercury). It also forms the Au auride anion thereby behaving analogously to the halogens; and it sometimes has a tendency, known as 'aurophilicity', to bond to itself.[6] On halogen character, see also Belpassi et al.[7] who conclude that in the aurides MAu (M = Li–Cs) gold 'behaves as a halogen, intermediate between Br and I'. On aurophilicity, see also.[8]
  2. ^ On the fuzziness of metalloids see for example Rouvray;[11] Cobb & Fetterolf;[12] and Fellet.[13] For the 'buffer zone' terminology see Rochow.[14] For examples of the application of a single criterion to classify metalloids see Mahan and Myers,[15] who use electrical conductivity; Miessler and Tarr,[16] who use electronegativity; and Hutton and Dickerson,[17] who rely on the acid-base behaviour of group oxides. Kneen, Rogers and Simpson[18] further suggest the use of such individual criteria as the structure of the elements, or their reactions with acids. For an example of the use of multiple criteria see Masterton and Slowinski,[19] who characterize metalloids on the concurrent basis of ionization energy, electronegativity and electrical behaviour.
  3. ^ Oderberg[47] argues on ontological grounds that anything that is not a metal, is a non-metal and that this includes semi-metals (i.e. metalloids).
  4. ^ Metals have electrical conductivity values of from 6.9 × 103 S•cm−1 for manganese to 6.3 × 105 for silver.[61][62]
  5. ^ Metalloids have electrical conductivity values of from 1.5 × 10−6 S•cm−1 for boron to 3.9 × 104 for arsenic.[64][65] If selenium is included as a metalloid the applicable conductivity range would start from ~10−9 to 10−12 S•cm−1.[66][67][68]
  6. ^ Non-metals have electrical conductivity values of from ~10−18 S•cm−1 for the elemental gases to 3 × 103 in graphite.[69][70]
  7. ^ The Goldhammer-Herzfeld criterion is a measure of the ratio of the force holding an individual atom's valence electrons in place as compared to the forces, acting on the same electrons, arising from interactions between the atoms in the solid or liquid element. When the interatomic forces are greater than or equal to the atomic force, valence electron itinerancy is indicated and metallic behaviour is predicted;[88][89] otherwise non-metallic behaviour is anticipated. Although based on classical arguments[90] the Herzfeld criterion nevertheless offers a relatively simple first order rationalization for the occurrence of metallic character amongst the elements.[91]
  8. ^ Rochow (1957, p. 224),[141] who would later write his 1966 monograph The metalloids,[142] commented that, 'In some respects selenium acts like a metalloid and tellurium certainly does.'
  9. ^ The literature is contradictory as to whether boron exhibits metallic conductivity in liquid form. Krishnan et al.[174] found that liquid boron behaved like a metal; Glorieux et al [175] characterised liquid boron as a semiconductor, on the basis of its low electrical conductivity; Millot et al.[176] reported that the emissivity of liquid boron was not consistent with that of a liquid metal.
  10. ^ Selenium has an IE of ~226 kcal/mol and is sometimes described as a semiconductor, but has a relatively high 2.55 EN. Polonium has an IE of ~196 kcal/mol and a 2.0 EN, but has a metallic band structure.[186][187] Astatine has an estimated IE of ~210±10 kcal/mol[188] and an EN of 2.2, but its electronic band structure is not known with any great degree of certainty.
  11. ^ Gallium is unusual (for a metal) in having a packing efficiency of just 39 per cent.[193] Other notable values are 42.9 for bismuth[191] and 58.5 for liquid mercury.[194]
  12. ^ A mnemonic which captures the common metalloids goes: Up, up-down, up-down, up…are the metalloids! [237]
  13. ^ Sanderson proposed a simple rule for distinguishing between metals and non-metals: 'With the single exception of hydrogen, all elements are metals if the number of electrons in the outermost shell of their atoms is equal to or less than the period number of the element (which is the same as the principal quantum number of that shell). Hydrogen and all other elements are nonmetals, but if the number of electrons in the outermost shell is one (or two) greater than their principal quantum number, they may show some metallic characteristics.' Radon was left out of his list of somewhat metallic elements despite its apparent eligibility (principle quantum number = 6; outermost shell electrons = 8); at that time, the noble gases were still considered to be incapable of forming chemical compounds. Following the synthesis of the first noble gas compound in 1962, references to cationic behaviour by radon appear from as early as 1969 (Stein 1969;[241] Pitzer 1975;[242] Schrobilgen 2011[243]).
  14. ^ Aluminium sometimes is[255] or is not[256] counted as a post-transition metal.
  15. ^ White phosphorus is the most common, industrially important,[271] and easily reproducible allotrope and, for those reasons, is the standard state of the element.[272] Paradoxically, it is also thermodynamically the least stable, as well as the most volatile and reactive form.[273]
  16. ^ Sacks[282] described the dividing line as, 'A jagged line, like Hadrian's Wall...[separating] the metals from the rest, with a few "semimetals," metallloids—arsenic, selenium—straddling the wall.'
  17. ^ The dividing line on the latter Mendeleev table starts off stepped as it travels past B, Si, P and As but then becomes serrated as it threads back up around Cr, back down past Se and Te, back up around Mn, then down past Br, I and a placeholder for eka-iodine.
  18. ^ Allegedly born c. 1394[324]
  19. ^ Couch also commented (p. 128) that there was, 'no sharp line of demarcation between metals and non-metals as many of the latter class possess some metallic properties' [italics added].

Citations

  1. ^ a b Haller 2006, p. 3
  2. ^ Deming & Hendricks 1942, p. 170
  3. ^ Butler 1930, p. 23
  4. ^ International Textbook Company 1908, p. 21
  5. ^ Hill & Holman 2000, p. 41
  6. ^ Wiberg 2001, p. 1279
  7. ^ Belpassi et al. 2006, pp. 4543–4554
  8. ^ Schmidbaur & Schier 2008, pp. 1931–1951
  9. ^ Oxford English Dictionary 1989, 'metalloid'
  10. ^ Gordh, Gordh & Headrick 2003, p. 753
  11. ^ Rouvray 1995, p. 546. Rouvray submits that classifying the electrical conductivity of the elements using the overlapping domains of metals, metalloids, and non-metals better reflects reality than a strictly black or white paradigm.
  12. ^ Cobb & Fetterolf 2005, p. 64: 'The division between metals and nonmetals is rather fuzzy, so the elements in the immediate vicinity of the zigzag staircase line are called metalloids, which means they don't fit either definition exactly.'
  13. ^ Fellet 2011: 'Chemistry has all sorts of fuzzy definitions'.
  14. ^ Rochow 1977, p. 14
  15. ^ Mahan & Myers 1987, p. 682
  16. ^ Miessler & Tarr 2004, p. 243
  17. ^ Hutton & Dickerson 1970, p. 162
  18. ^ Kneen, Rogers and Simpson 1972, p. 219
  19. ^ Masterton & Slowinski 1977, p. 160, as discussed in the Semi-quantitative characterization section of this article
  20. ^ Foster 1936, pp. 212–13
  21. ^ Brownlee et al. 1943, p. 293
  22. ^ Klemm 1950, pp. 133–142
  23. ^ Reilly 2004, p. 4
  24. ^ Walters 1982, pp. 32–33
  25. ^ a b Tyler 1948, p. 105
  26. ^ Slade 2006, p. 16
  27. ^ Corwin 2005, p. 80
  28. ^ Bradbury et al. 1957, pp. 157, 659
  29. ^ Hoppe 2011
  30. ^ Pashaey & Seleznev 1973, p. 565
  31. ^ Gladyshev & Kovaleva 1998, p. 1445
  32. ^ Eason 2007, p. 294
  33. ^ Johansen & Mackintosh 1970, pp. 121–124
  34. ^ Divakar, Mohan & Singh 1984, p. 2337
  35. ^ Dávila et al. 2002, p. 035411-3
  36. ^ Jezequel & Thomas 1997, pp. 6620–6626
  37. ^ Hindman 1968, p. 434: 'The high values obtained for the [electrical] resistivity indicate that the metallic properties of neptunium are closer to the semimetals than the true metals. This is also true for other metals in the actinide series.'
  38. ^ Dunlap et al. 1970, pp. 44, 46: '…α-Np is a semimetal, in which covalency effects are believed to also be of importance…For a semimetal having strong covalent bonding, like α-Np…'
  39. ^ a b c Roher 2001, pp. 4–6
  40. ^ Reilly 2002, pp. 5–6
  41. ^ Hampel & Hawley 1976, p. 174
  42. ^ Goodrich 1844, p. 264
  43. ^ The Chemical News 1897, p. 189
  44. ^ a b Hampel & Hawley 1976, p. 191
  45. ^ Lewis 1993, p. 835
  46. ^ a b c Hérold 2006, pp. 149–150
  47. ^ Oderberg 2007, p. 97
  48. ^ a b c d e f g Goldsmith 1982, p. 526
  49. ^ a b c d e f Hawkes 2001, p. 1686
  50. ^ Sharp 1981, p. 299
  51. ^ Kneen, Rogers & Simpson, 1972, p. 263. Columns 1 and 3 are sourced from this reference unless otherwise indicated.
  52. ^ Stoker 2010, p. 62
  53. ^ Chang 2002, p. 304. Chang speculates that the melting point of francium would be about 23°C.
  54. ^ a b c Rochow 1966, p. 4
  55. ^ Hunt 2000, p. 256
  56. ^ Pottenger & Bowes 1976, p. 138
  57. ^ Deming 1952, p. 394
  58. ^ a b Hultgren 1966, p. 648
  59. ^ Sisler 1973, p. 89
  60. ^ a b McQuarrie & Rock 1987, p. 85
  61. ^ Desai, James & Ho 1984, p. 1160
  62. ^ Matula 1979, p. 1260
  63. ^ Choppin & Johnsen 1972, p. 351
  64. ^ Schaefer 1968, p. 76
  65. ^ Carapella 1968, p. 30
  66. ^ Glazov, Chizhevskaya & Glagoleva 1969 p. 86
  67. ^ a b Kozyrev 1959, p. 104
  68. ^ a b Chizhikov & Shchastlivyi 1968, p. 25
  69. ^ Bogoroditskii & Pasynkov 1967, p. 77
  70. ^ Jenkins & Kawamura 1976, p. 88
  71. ^ Cverna 2002, p.1
  72. ^ Cordes & Scaheffer 1973, p. 79
  73. ^ Hill & Holman 2000, p. 42
  74. ^ Tilley 2004, p. 487
  75. ^ Wiberg 2001, p. 143
  76. ^ Gupta et al. 2005, p. 502
  77. ^ a b Wilson 1966, p. 260
  78. ^ Wittenberg 1972, p. 4526
  79. ^ Habashi 2003, p. 73
  80. ^ Wilson 1965, p. 502
  81. ^ Slough 1972, p. 362
  82. ^ a b Rao & Ganguly 1986
  83. ^ a b Edwards & Sienko 1983, p. 691
  84. ^ Anita 1998
  85. ^ Wulfsberg 2000, p. 620
  86. ^ a b Swalin 1962, p. 216
  87. ^ Russell 1981, p. 628
  88. ^ Herzfeld 1927
  89. ^ Edwards 2000, pp. 100–103
  90. ^ Edwards 1999, p. 416
  91. ^ a b Edwards & Sienko 1983, p. 695
  92. ^ a b Edwards et al. 2010
  93. ^ Bailar et al. 1989, p. 742
  94. ^ Metcalfe, Williams & Castka 1966, p. 72
  95. ^ Chang 1994, p. 311
  96. ^ Pauling 1988, p. 183
  97. ^ Mann et al. 2000, p. 2783
  98. ^ Cox 2004, p. 27
  99. ^ Hiller & Herber 1960, p. 225
  100. ^ Beveridge et al. 1997, p. 185
  101. ^ a b Young & Sessine 2000, p. 849
  102. ^ Bailar et al. 1989, p. 417
  103. ^ Bassett et al. 1966, p. 602
  104. ^ Martienssen & Warlimont 2005, p. 257
  105. ^ Brasted 1974, p. 814
  106. ^ Atkins 2006, pp. 8, 122–23
  107. ^ Sidorov 1960
  108. ^ a b Rao 2002, p. 22
  109. ^ Caven & Lander 1906, p. 146
  110. ^ Rochow 1966, pp. 28–29
  111. ^ Dunstan 1968, pp. 408, 438
  112. ^ Rochow 1966, p. 34
  113. ^ Rock & Gerhold 1974, pp. 535, 537
  114. ^ Nickelès 1861
  115. ^ United States Air Force Medical Service 1966, p. 3-3
  116. ^ Schaffter 2006, p. 46
  117. ^ Remy 1956, p. 1
  118. ^ Johnston 1992, p. 57
  119. ^ Boikess & Edelson 1985, p. 85
  120. ^ Aldridge 1998, p. 290
  121. ^ Malerba 1985, p. 13
  122. ^ Rochow 1966, p. 14
  123. ^ Emsley 1971, p. 1
  124. ^ Selwood 1965, pp. 166, inside back cover
  125. ^ Kneen et al. 1972, pp. 218–220
  126. ^ Chatt 1951, p. 417: 'The boundary between metals and metalloids is indefinite…'.
  127. ^ Burrows et al. 2009, p. 1192: 'Although the elements are conveniently described as metals, metalloids, and non-metals, the transitions are not exact…'.
  128. ^ Boylan 1962, p. 493
  129. ^ Sherman & Weston 1966, p. 64
  130. ^ Wulfsberg 1991, p. 201
  131. ^ Kotz, Treichel & Weaver 2009, p. 62
  132. ^ Segal 1989, p. 965
  133. ^ McMurray & Fay 2009, p. 767
  134. ^ Bucat 1983, p. 26
  135. ^ Brown c. 2007
  136. ^ a b Swift & Schaefer 1962, p. 100
  137. ^ a b Hawkes 2010
  138. ^ a b c Holt, Rinehart & Wilson c. 2007
  139. ^ Young et al. 2010, p. 9
  140. ^ a b Craig 2003, p. 391. Selenium is included in this work on account of its 'near metalloidal' status.
  141. ^ Rochow 1957
  142. ^ Rochow 1966
  143. ^ Moss 1952, p. 192
  144. ^ a b Glinka 1965, p. 356
  145. ^ Evans 1966, pp. 124–5
  146. ^ Regnault 1853, p. 208
  147. ^ Scott & Kanda 1962, p. 311
  148. ^ Arlman 1939
  149. ^ a b c Berger 1997, pp. 86–87
  150. ^ Glazov, Chizhevskaya & Glagoleva 1969, p. 86
  151. ^ Chao & Stenger 1964
  152. ^ Synder 1966, p. 242
  153. ^ Fritz & Gjerde 2008, p. 235
  154. ^ Cotton et al. 1999, pp. 496, 503–504
  155. ^ a b Cotton et al. 1999, p. 502
  156. ^ Schwietzer & Pesterfield 2010, pp. 242–243
  157. ^ Wiberg 2001, p. 594
  158. ^ Barrett 2003, p. 119
  159. ^ Harding, Johnson & Janes 2002, p. 61
  160. ^ a b Hawkes 1999
  161. ^ Roza 2009, p. 12
  162. ^ Keller 1985
  163. ^ Vasáros & Berei 1985, p. 109
  164. ^ Haissinsky & Coche 1949, p. 400
  165. ^ Brownlee et al. 1950, p. 173
  166. ^ Batsanov 1971, p. 811
  167. ^ Feng & Lin 2005, p. 157
  168. ^ Borst 1982, pp. 465, 473
  169. ^ Schwietzer & Pesterfield 2010, pp. 258–260
  170. ^ Olmsted & Williams GM 1997, p. 328
  171. ^ Daintith 2004, p. 277
  172. ^ Samsonov 1968, p. 590
  173. ^ Rossler 1985, pp. 143–144
  174. ^ Krishnan et al. 1998
  175. ^ Glorieux, Saboungi & Enderby 2001
  176. ^ Millot et al. 2002
  177. ^ Vasáros & Berei 1985, p. 117
  178. ^ Kaye & Laby 1973, p. 228
  179. ^ Champion et al. 2010
  180. ^ Siekierski & Burgess 2002, pp. 65, 122
  181. ^ Emsley 2003, p. 48
  182. ^ NIST 2010. Values shown in the above table have been converted from the NIST values, which are given in eV.
  183. ^ Berger 1997
  184. ^ a b Lovett 1977, p. 3
  185. ^ Masterton & Slowinski 1977, p. 160. They list B, Si, Ge, As, Sb and Te as metalloids, and comment that Po and At are ordinarily classified as metalloids but add that, 'since very little is known about their chemical and physical properties, and such classification must be rather arbitrary.'
  186. ^ Kraig, Roundy & Cohen 2004, p. 412
  187. ^ Alloul 2010, p. 83
  188. ^ NIST 2011. They cite Finkelnburg & Humbach (1955) who give a figure of 9.2±0.4 eV = 212.2±9.224 kcal/mol.
  189. ^ Van Setten et al. 2007, pp. 2460–61 (B)
  190. ^ Russell & Lee 2005, p. 7 (Si, Ge)
  191. ^ a b c Pearson 1972, p. 264 (As, Sb, Te; also black P)
  192. ^ Russell & Lee 2005, p. 1
  193. ^ Russell & Lee 2005, pp. 6‒7, 387
  194. ^ Okakjima & Shomoji 1972, p. 258
  195. ^ Kitaĭgorodskiĭ 1961, p. 108
  196. ^ a b c Neuburger 1936
  197. ^ Tilden 1876, pp. 172, 198–201
  198. ^ Smith 1994, p. 252
  199. ^ Bodner & Pardue 1993, p. 354
  200. ^ Bassett et al. 1966, p. 127
  201. ^ Kent 1950, pp. 1–2
  202. ^ Clark 1960, p. 588
  203. ^ a b c Warren & Geballe 1981
  204. ^ a b Rausch 1960
  205. ^ Cobb & Fetterolf 2005, p. 64
  206. ^ Metcalfe, Williams & Castka 1982, p. 585
  207. ^ Thayer 1977, p. 604
  208. ^ Chalmers 1959, p. 72
  209. ^ United States Bureau of Naval Personnel 1965, p. 26
  210. ^ Siebring 1967, p. 513
  211. ^ Wiberg 2001, p. 282
  212. ^ a b c Friend 1953, p. 68
  213. ^ Murray 1928, p. 1295
  214. ^ Hampel & Hawley 1966, p. 950
  215. ^ Stein 1985
  216. ^ Stein 1987, pp. 240, 247–248
  217. ^ Dunstan 1968, pp. 310, 409. Dunstan lists Be, Al, Ge (maybe), As, Se (maybe), Sn, Sb, Te, Pb, Bi and Po as metalloids (pp. 310, 323, 409, 419).
  218. ^ Hatcher 1949, p. 223
  219. ^ Taylor 1960, p. 614
  220. ^ Considine & Considine 1984, p. 568
  221. ^ Cegielski 1998, p. 147
  222. ^ The American heritage science dictionary 2005 p. 397
  223. ^ Woodward 1948, p. 1
  224. ^ a b Metcalfe et al. 1974, p. 539
  225. ^ Ogata, Li & Yip 2002
  226. ^ Boyer et al. 2004, p. 1023
  227. ^ Russell & Lee 2005, p. 359
  228. ^ Cooper 1968, p. 25
  229. ^ Henderson 2000, p. 5
  230. ^ Silberberg 2002, p. 312
  231. ^ a b Hamm 1969, p. 653
  232. ^ Stott 1956, p. 100
  233. ^ Steele 1966, p. 60
  234. ^ Daub & Seese 1996, pp. 70, 109: 'Aluminum is not a metalloid but a metal because it has mostly metallic properties.'
  235. ^ Denniston, Topping & Caret 2004, p. 57: 'Note that aluminum (Al) is classified as a metal, not a metalloid.'
  236. ^ Hasan 2009, p. 16: 'Aluminum does not have the characteristics of a metalloid but rather those of a metal.'
  237. ^ Tuthill 2011
  238. ^ Fernelius & Robey 1935, p. 54
  239. ^ Szabó & Lakatos 1954, p. 133
  240. ^ Sanderson 1957
  241. ^ Stein 1969
  242. ^ Pitzer 1975
  243. ^ Schrobilgen 2011: 'The chemical behaviour of radon is similar to that of a metal fluoride and is consistent with its position in the periodic table as a metalloid element.'
  244. ^ Petty 2007, p. 25
  245. ^ Reid 2002. Reid refers to near metalloids as Al, C or P.
  246. ^ Carr 2011. Carr refers to near metalloids as C, P, Se, Sn and Bi.
  247. ^ Russell & Lee 2005, p. 5
  248. ^ Parish 1977, pp. 178, 192–3
  249. ^ Eggins 1972, p. 66
  250. ^ Rayner-Canham & Overton 2006, pp. 29–30
  251. ^ Stott 1956, pp. 99–106; 107
  252. ^ Rayner-Canham & Overton 2006, pp. 29–30: 'There is a subgroup of metals, those closest to the borderline, that exhibit some chemical behaviour that is more typical of the semimetals, particularly formation of anionic species. These nine chemically weak metals are beryllium, aluminium, zinc, gallium, tin, lead, antimony, bismuth, and polonium.'
  253. ^ Hill & Holman 2000, p. 40
  254. ^ Farrell & Van Sicien 2007, p. 1442: 'For simplicity, we will use the term poor metals to denote one with a significant covalent, or directional character.'
  255. ^ a b Whitten et al. 2007, p. 868
  256. ^ a b Cox 2004, p. 185
  257. ^ Bailar et al. 1989, p. 742–3
  258. ^ Atkins 2006, pp. 320–21
  259. ^ Rochow 1966, p. 7
  260. ^ Taniguchi et al. 1984, p. 867: '…black phosphorus…[is] characterized by the wide valence bands with rather delocalized nature.'
  261. ^ Morita 1986, p. 230
  262. ^ Carmalt & Norman 1998, pp. 1–38: 'Phosphorus…should therefore be expected to have some metalloid properties'.
  263. ^ Du et al. 2010. Interlayer interactions in black phosphorus, which are attributed to van der Waals-Keesom forces, are thought to contribute to the smaller band gap of the bulk material (calculated 0.19 eV; observed 0.3 eV) as opposed to the larger band gap of a single layer (calculated ~0.75 eV).
  264. ^ Oberleas, Harland & Harland 1999, p. 168
  265. ^ Steudel 1977, p. 240: '…considerable orbital overlap must exist, to form intermolecular, many-center…[sigma] bonds, spread through the layer and populated with delocalized electrons, reflected in the properties of iodine (lustre, color, moderate electrical conductivity).'
  266. ^ Segal 1989, p. 481: 'Iodine exhibits some metallic properties…'.
  267. ^ Jain 2005, p. 1458
  268. ^ a b Lutz 2011, p. 16
  269. ^ Yacobi & Holt 1990, p. 10
  270. ^ Wiberg 2001, p. 160
  271. ^ Eagleson 1994, p. 820
  272. ^ Oxtoby, Gillis & Campion 2008, p. 508
  273. ^ Greenwood & Earnshaw 2002, pp. 479, 482
  274. ^ Horvath 1973, p. 336
  275. ^ Tarendash 2001, p. 78
  276. ^ Thompson 1999
  277. ^ DiSalvo 2000, p. 1800
  278. ^ Whitley 2009
  279. ^ King 2005, p. 6006
  280. ^ Herchenroeder & Gschneidner 1988
  281. ^ De Graef & McHenry 2007, p. 34
  282. ^ Sacks 2001, pp. 191, 194
  283. ^ Kniep 1996, p. xix
  284. ^ Nordell & Miller 1999, p. 579
  285. ^ Hinrichs 1869, p. 115. In his article Hinrichs included a periodic table, organized by atomic weight, but this did not show a metal-nonmetal dividing line. Rather, he wrote that, '…elements of like properties or their compounds of like properties, form groups bounded by simple lines. Thus a line drawn through C, As, Te, separates the elements, having metallic lustre from those not having such lustre. The gaseous elements form a small group by themselves, the condensible [sic] chlorine forming the boundary…So also the boundary lines for other properties may be drawn.'
  286. ^ Walker 1891, p. 252
  287. ^ Miles & Gould 1976, p. 444: 'His "Introduction to General Inorganic Chemistry," 1906, was one of the most important textbooks in the field during the first quarter of the twentieth century.'
  288. ^ Smith 1906, pp. 408, 410
  289. ^ Deming 1923, pp. 160, 165
  290. ^ Abraham, Coshow & Fix, W 1994, p. 3
  291. ^ Emsley 1985, p. 36
  292. ^ Fluck 1988, p. 432
  293. ^ a b Brown & Holme 2006, p. 57
  294. ^ Swenson 2005
  295. ^ Simple Memory Art c. 2005
  296. ^ Chedd 1969, pp. 12–13
  297. ^ Mendeléeff 1897, p. 23
  298. ^ Mackay & Mackay 1989, p. 24
  299. ^ Norman 1997, p. 31
  300. ^ Whitten, Davis & Peck 2003, p. 1140
  301. ^ Kotz, Treichel & Weaver 2005, pp. 79–80
  302. ^ Housecroft & Constable 2006, p. 322
  303. ^ Deming 1923, p. 381
  304. ^ Russell & Lee 2005, pp. 421, 423
  305. ^ Kaminow & Li 2002, p. 118
  306. ^ Deming 1925, pp. 330 (As2O3), 418 (B2O3; SiO2; Sb2O3)
  307. ^ Witt & Gatos 1968, p. 242 (GeO2)
  308. ^ Eagleson 1994, p. 421 (GeO2)
  309. ^ Rothenberg 1976, 56, 118‒119 (TeO2)
  310. ^ Desch 1914, p. 86
  311. ^ Phillips & Williams 1965, p. 620
  312. ^ Van der Put 1998, p. 123
  313. ^ Sanderson 1960, p. 83
  314. ^ Klug & Brasted 1958, p. 199
  315. ^ Good et al. 1813
  316. ^ Russell & Lee 2005, pp. 423‒4; 405‒6
  317. ^ Davidson & Lakin 1973, p. 627
  318. ^ Berger 1997, p. 91
  319. ^ Hampel 1968, passim
  320. ^ Rochow 1966, p. 41
  321. ^ Berger 1997, pp. 42‒43
  322. ^ Cornford 1937, pp. 249–50
  323. ^ Obrist 1990, pp. 163–64
  324. ^ Thomson 1830, p. 44
  325. ^ a b Paul 1865, p. 933
  326. ^ Roscoe & Schorlemmer 1894, pp. 3–4
  327. ^ Jungnickel & McCormmach 1996, p. 279–281
  328. ^ Craig 1849
  329. ^ Roscoe & Schorlemmer 1894, pp. 1–2
  330. ^ Strathern 2000, p. 239
  331. ^ a b Roscoe & Schormlemmer 1894, p. 4
  332. ^ Tweney & Shirshov 1935
  333. ^ Partington 1964, p. 168
  334. ^ a b Bache 1832, p. 250
  335. ^ Glinka 1958, p. 76
  336. ^ Partington 1964, pp. 145, 168
  337. ^ Jorpes 1970, p. 95
  338. ^ Berzelius 1825, p. 168
  339. ^ Jackson 1844, p. 368
  340. ^ Brande & Cauvin 1945, p. 223
  341. ^ The Chemical News and Journal of Physical Science 1864
  342. ^ Oxford English Dictionary 1989, 'non-metal'
  343. ^ Tilden 1876, p. 198
  344. ^ The Chemical News and Journal of Physical Science 1888
  345. ^ Beach 1911
  346. ^ Mayo 1917, p. 55
  347. ^ Couch 1920, p. 128
  348. ^ Webster's New International Dictionary 1926, p. 1359
  349. ^ Lundgren & Bensaude-Vincent 2000, p. 409
  350. ^ Greenberg 2007, p. 562
  351. ^ Pauling 1947, p. 65
  352. ^ IUPAC 1959, p. 10
  353. ^ IUPAC 1971, p. 11
  354. ^ Google Ngram, viewed 11 February 2011
  355. ^ Atkins 2010, p. 20
  356. ^ Gray 2010
  357. ^ Wilson 1939, pp. 21–22
  358. ^ Feng & Jin 2005, p. 324
  359. ^ Sólyom 2008, p. 91

References

  • Abraham M, Coshow, D & Fix, W 1994, Periodicity: A source book module, version 1.0. Chemsource, Inc., New York, viewed 26 Aug 11, p. 3
  • Aldridge BG 1998, Science interactions: Course 2, 3rd ed., Glencoe/McGraw-Hill
  • Alloul H 2010, Introduction to the physics of electrons in solids, Springer-Verlag, Berlin
  • Arlman EJ 1939, 'The complex compounds P(OH)4.ClO4 and Se(OH)3.ClO4', Recueil des Travaux Chimiques des Pays-Bas, vol. 58, no. 10, pp. 871–874
  • Atkins P, Overton T, Rourke J, Weller M & Armstrong F 2006, Shriver & Atkins' inorganic chemistry, 4th ed., Oxford University Press, Oxford, ISBN 0716748789
  • Atkins P, Overton T, Rourke J, Weller M & Armstrong F 2010, Shriver & Atkins' inorganic chemistry, 5th ed., Oxford University Press, Oxford, ISBN 1429218207
  • Anita M 1998, 'Levitating liquid boron', Physical Review Focus
  • Bache AD 1832, 'An essay on chemical nomenclature, prefixed to the treatise on chemistry; by J. J. Berzelius', American Journal of Science, vol. 22, pp. 248–277
  • Bailar JC, Moeller T, Kleinberg J, Guss CO, Castellion ME & Metz C 1989, Chemistry, 3rd ed., Harcourt Brace Jovanovich, San Diego
  • Barrett J 2003, Inorganic chemistry in aqueous solution, The Royal Society of Chemistry, Cambridge, ISBN 085404471X
  • Bassett LG, Bunce SC, Carter AE, Clark HM & Hollinger HB 1966, Principles of chemistry, Prentice-Hall, Englewood Cliffs, NJ
  • Batsanov SS 1971, 'Quantitative characteristics of bond metallicity in crystals', Journal of Structural Chemistry, vol. 12, no. 5, pp. 809–813, doi 10.1007/BF00743349
  • Beach FC (ed.) 1911, The Americana: A universal reference library, Scientific American Compiling Department, New York, vol. XIII, Mel–New
  • Belpassi L, Tarantelli F, Sgamellotti A & Quiney HM 2006, 'The electronic structure of alkali aurides. A four-component Dirac−Kohn−Sham study', The Journal of Physical Chemistry A, vol. 110, issue 13, April 6, pp. 4543–4554, cited in P Pyykko 2008, 'Theoretical chemistry of gold. III', Chemical Society Reviews, vol. 37, pp. 1967–1997
  • Berger LI 1997, Semiconductor materials, CRC Press, Boca Raton, Florida
  • Berzelius JJ 1825, Lehrbuch der chemie (Textbook of chemistry), vol. 1, pt. 1, trans. F Wöhle, Arnold, Dresden
  • Beveridge TJ, Hughes MN, Lee H, Leung KT, Poole RK, Savvaidis I, Silver S & Trevors JT 1997, 'Metal–microbe interactions: Contemporary approaches', in RK Poole (ed.), Advances in microbial physiology, vol. 38, Academic Press, San Diego, pp. 177–243
  • Bodner GM & Pardue HL 1993, Chemistry, an experimental science, John Wiley & Sons, New York, ISBN 0471593869
  • Bogoroditskii NP & Pasynkov VV 1967, Radio and electronic materials, Iliffe Books, London
  • Boikess RS & Edelson E 1985, Chemical principles, 3rd ed., Harper & Row, New York
  • Borst KE 1982, 'Characteristic properties of metallic crystals', Journal of Educational Modules for Materials Science and Engineering, vol. 4, no. 3, pp. 457–492
  • Boyer RD, Li J, Ogata S & Yip S 2004, 'Analysis of shear deformations in Al and Cu: empirical potentials versus density functional theory', Modelling and Simulation in Materials Science and Engineering, vol. 12, no. 5, pp. 1017–1029
  • Boylan PJ 1962, Elements of chemistry, Allyn & Bacon, Boston
  • Bradbury GM, McGill MV, Smith HR & Baker PS 1957, Chemistry and you, Lyons and Carnahan, Chicago
  • Brande WT & Cauvin J 1945, A dictionary of science, literature and art, Harper & Brothers, New York
  • Brasted RC 1974, 'Oxygen group elements and their compounds', in The New Encyclopaedia Britannica, vol. 13, Encyclopaedia Britannica, Chicago, pp. 809–824
  • Brown L & Holme T 2006, Chemistry for engineering students, Thomson Brooks/Cole, Belmont CA, ISBN 0495017183
  • Brown WP c. 2007 'The properties of semi-metals or metalloids,' Doc Brown's chemistry: Introduction to the periodic table
  • Brownlee RB, Fuller RW, Hancock WJ, Sohon MD & Whitsit JE 1943, Elements of chemistry, Allyn and Bacon, Boston
  • Brownlee RB, Fuller RT, Whitsit JE Hancock WJ & Sohon MD 1950, Elements of chemistry, Allyn and Bacon, Boston
  • Bucat RB (ed.) 1983, Elements of chemistry: Earth, air, fire & water, vol. 1, Australian Academy of Science, Canberra
  • Burrows A, Holman J, Parsons A, Pilling G & Price G 2009, Chemistry3: Introducing inorganic, organic and physical chemistry, Oxford University, Oxford
  • Butler JAV 1930, The chemical elements and their compounds: An introduction to the study of inorganic chemistry from modern standpoints, Macmillan, London
  • Carapella SC 1968, 'Arsenic' in CA Hampel (ed.), The encyclopedia of the chemical elements, Reinhold, New York, pp. 29–32
  • Carmalt CJ & Norman NC 1998, 'Arsenic, antimony and bismuth: Some general properties and aspects of periodicity' in NC Norman (ed.), Chemistry of arsenic, antimony, and bismuth, Blackie Academic &​ Professional, London, pp. 1–38
  • Carr K 2011, What are types of metalloids?
  • Caven RM & Lander GD 1906, Systematic inorganic chemistry from the standpoint of the periodic law: a text-book for advanced students, Blackie & Son, London
  • Cegielski C 1998, Yearbook of science and the future, Encyclopaedia Britannica, Chicago
  • Chalmers B 1959, Physical metallurgy, John Wiley & Sons, New York
  • Champion J, Alliot C, Renault E, Mokili BM, Chérel M, Galland N & Montavon G 2010, 'Astatine standard redox potentials and speciation in acidic medium', The Journal of Physical Chemistry A, vol. 114, no. 1, pp. 576–582, doi 10.1021/jp9077008
  • Chang R 1994, Chemistry, 5th (international) ed., McGraw-Hill, New York
  • Chang R 2002, Chemistry, 7th ed., McGraw Hill, Boston
  • Chao MS & Stenger VA 1964, 'Some physical properties of highly purified bromine', Talanta, vol. 11, no. 2, pp. 271–281, doi 10.1016/0039-9140(64)80036-9
  • Chatt J 1951, 'Metal and metalloid compounds of the alkyl radicals', in EH Rodd (ed.), Chemistry of carbon compounds: A modern comprehensive treatise, vol. 1, part A, Elsevier, Amsterdam, pp. 417‒458
  • Chedd G 1969, Half-way elements: The technology of metalloids, Doubleday, New York
  • Chizhikov DM & Shchastlivyi VP 1968, Selenium and selenides, translated from the Russian by EM Elkin, Collet’s, London
  • Choppin GR & Johnsen RH 1972, Introductory chemistry, Addison-Wesley, Reading, Massachusetts
  • Clark GL 1960, The encyclopedia of chemistry, Reinhold, New York
  • Cobb C & Fetterolf ML 2005, The joy of chemistry, Prometheus Books, New York, ISBN 1591022312
  • Considine DM & Considine GD (eds) 1984, 'Metalloid', in Van Nostrand Reinhold Encylopedia of Chemistry, 4th ed., Van Nostrand Reinhold, New York
  • Cooper DG 1968, The periodic table, 4th ed., Butterworths, London
  • Cordes EH & Scaheffer R 1973, Chemistry, Harper & Row, New York
  • Cornford FM 1937, Plato's cosmology: the Timaeus of Plato translated with a running commentary by Francis Macdonald Cornford, Routledge and Kegan Paul, London
  • Corwin CH 2005, Introductory chemistry: concepts & connections, 4th ed., Prentice Hall, Upper Saddle River, NJ, ISBN 0131448501
  • Cotton FA, Wilkinson G, Murillo CA & Bochmann 1999, Advanced inorganic chemistry, 6th ed., John Wiley & Sons, New York, ISBN 0471199575
  • Couch JF 1920, A dictionary of chemical terms, D Van Nostrand, New York
  • Cox PA 2004, Inorganic chemistry, 2nd ed., Instant notes series, Bios Scientific, London
  • Craig J 1849, A new universal etymological technological, and pronouncing dictionary of the English language, vol. II, Henry George Collins, London
  • Craig PJ 2003, Organometallic compounds in the environment, John Wiley & Sons, New York
  • Cverna F 2002, ASM ready reference: Thermal properties of metals, ASM International, Materials Park, Ohio
  • Daintith J (ed.) 2004, Oxford dictionary of chemistry, 5th ed., Oxford University, Oxford, ISBN 0199204632
  • Daub GW & Seese WS 1996, Basic chemistry, 7th ed., Prentice Hall, New York
  • Davidson DF & Lakin HW 1973, 'Tellurium', in DA Brobst & WP Pratt (eds), United States mineral resources, Geological survey professional paper 820, United States Government Printing Office, Washington, pp. 627–630
  • Dávila ME, Molotov SL, Laubschat C & Asensio MC 2002, 'Structural determination of Yb single-crystal films grown on W(110) using photoelectron diffraction', Physical Review B, vol. 66, pp. 035411–1 to 8
  • De Graef M & McHenry ME 2007, Structure of materials: an introduction to crystallography, diffraction and symmetry, Cambridge University Press, Cambridge, ISBN 0521651514
  • Deming HG 1923, General chemistry: An elementary survey, John Wiley & Sons, New York
  • Deming HG 1925, General chemistry: An elementary survey, 2nd ed., John Wiley & Sons, New York
  • Deming HG 1952, General chemistry: An elementary survey, 6th ed., John Wiley & Sons, New York
  • Deming HG & Hendricks BC 1942, Introductory college chemistry: a course for beginners, John Wiley & Sons, New York
  • Denniston KJ, Topping JJ & Caret RL 2004, General, organic, and biochemistry, 5th ed., McGraw-Hill, New York
  • Desai PD, James HM & Ho CY 1984, 'Electrical resistivity of aluminum and manganese', Journal of Physical and Chemical Reference Data, vol. 13, no. 4, pp. 1131–1172
  • Desch CH 1914, Intermetallic compounds, Longmans, Green and Co., New York
  • DiSalvo FJ 2000, 'Challenges and opportunities in solid-state chemistry', Pure and Applied Chemistry, vol. 72, no. 10, pp. 1799–1807, doi 10.1351/pac200072101799
  • Divakar C, Mohan M & Singh AK 1984, 'The kinetics of pressure-induced fcc-bcc transformation in ytterbium', Journal of Applied Physics, vol. 56, no. 8, pp. 2337‒2340
  • Du Y, Ouyang C, Shi S & Lei M 2010, 'Ab initio studies on atomic and electronic structures of black phosphorus', Journal of Applied Physics, vol. 107, pp. 093718-1–4.
  • Dunlap BD, Brodsky MB, Shenoy GK & Kalvius GM 1970, 'Hyperfine interactions and anisotropic lattice vibrations of 237Np in α-Np metal', Physical Review B, vol. 1, no. 1, pp. 44–49
  • Dunstan S 1968, Principles of chemistry, D. Van Nostrand Company, London
  • Eagleson M 1994, Concise encyclopedia chemistry, Walter de Gruyter, Berlin
  • Eason R 2007, Pulsed laser deposition of thin films: applications-led growth of functional materials, Wiley-Interscience, New York
  • Edwards PP 1999, 'Chemically engineering the metallic, insulating and superconducting state of matter' in KR Seddon & M Zaworotko (eds), Crystal engineering: The design and application of functional solids, Kluwer Academic, Dordrecht, pp. 409–431
  • Edwards PP 2000, 'What, why and when is a metal?', in N Hall (ed.), The New Chemistry, Cambridge University, Cambridge, pp. 85–114
  • Edwards PP, Lodge MTJ, Hensel F & Redmer R 2010, '…a metal conducts and a non-metal doesn't', Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol. 368, pp. 941–965, Bibcode 2010RSPTA.368..941E, doi 10.1098rsta.2009.0282
  • Edwards PP & Sienko MJ 1983, 'On the occurrence of metallic character in the periodic table of the elements', Journal of Chemical Education, vol. 60, no. 9, p. 691, Bibcode 1983JChEd..60..691E, doi 10.1021ed060p691
  • Eggins BR 1972, Chemical structure and reactivity, MacMillan, London
  • Emsley J 1971, The inorganic chemistry of the non-metals, Methuen Educational, London
  • Emsley J, 1985 'Mendeleyev’s dream table', New Scientist, 7 March, pp. 32–36
  • Emsley J 2003, Nature's building blocks: An A–Z guide to the elements, ISBN 0198503407
  • Evans RC 1966, An introduction to crystal chemistry, Cambridge University, Cambridge
  • Farrell HH & Van Sicien CD 2007, 'Binding energy, vapor pressure, and melting point of semiconductor nanoparticles', Journal of Vacuum Science Technology B, vol. 25, no. 4, pp. 1441–1447
  • Fellet M 2011, 'Redefining hydrogen bonds, the givers of life', New Scientist, 28 Jul
  • Feng & Jin 2005, Introduction to condensed matter physics: Volume 1, World Scientific, Singapore, ISBN 1842653474
  • Fernelius WC & Robey RF 1935, 'The nature of the metallic state', Journal of Chemical Education, vol. 12, no. 2, pp. 53–68
  • Finkelnburg W & Humbach W 1955, 'Ionisierungsenergien von atomen und atomionen,' Die Naturwissenschaften, vol. 42, issue 2, pp. 35–37
  • Fluck E 1988, 'New notations in the period table', Pure & Applied Chemistry, vol. 60, no. 3, pp. 431–436
  • Foster W 1936, The romance of chemistry, D. Appleton-Century, New York
  • Friend JN 1953, Man and the chemical elements, 1st ed., Charles Scribner's Sons, New York
  • Fritz JS & Gjerde DT 2008, Ion chromatography, John Wiley & Sons, New York, ISBN 3527613250
  • Gladyshev VP & Kovaleva SV 1998, 'Liquidus shape of the mercury–gallium system', Russian Journal of Inorganic Chemistry, vol. 43, no. 9, pp. 1445‒1446
  • Glazov VM, Chizhevskaya SN & Glagoleva NN 1969, Liquid semiconductors, Plenum, New York
  • Glinka N 1958, General chemistry, Foreign Languages Publishing House, Moscow
  • Glinka N 1965, General chemistry, trans. D Sobolev, Gordon & Breach, New York
  • Glorieux B, Saboungi ML & Enderby JE 2001, 'Electronic conduction in liquid boron', Europhysics Letters (EPL), vol. 56, pp. 81–85, Bibcode 2001EL.....56...81G, doi 10.1209/epl/i2001-00490-0
  • Goldsmith RH 1982, 'Metalloids', Journal of Chemical Education, vol. 59, no. 6, pp. 526–527, Bibcode 1982JChEd..59..526G, doi 10.1021/ed059p526
  • Good JM, Gregory O & Bosworth N 1813, 'Arsenicum', in Pantologia: a new cyclopedia…of essays, treatises, and systems…with a general dictionary of arts, sciences, and words…, Kearsely, London
  • Goodrich BG 1844, A glance at the physical sciences, Bradbury, Soden & Co., Boston
  • Google Ngram, viewed 11 February 2011
  • Gordh G, Gordh G & Headrick D 2003, A dictionary of entomology, CABI Publishing, Wallingford, ISBN 0851996558
  • Greenberg A 2007, From alchemy to chemistry in picture and story, John Wiley & Sons, Hoboken, NJ
  • Greenwood NN & Earnshaw A 2002, Chemistry of the elements, 2nd ed., Butterworth-Heinemann
  • Gray T 2010, 'Metalloids (7)'
  • Gupta A, Awana VPS, Samanta SB, Kishan H & Narlikar AV 2005, 'Disordered superconductors' in AV Narlikar (ed.), Frontiers in superconducting materials, Springer-Verlag, Berlin, p. 502
  • Habashi F 2003, Metals from ores: an introduction to extractive metallurgy, Métallurgie Extractive Québec, Sainte Foy, Québec, ISBN 2922686043
  • Haissinsky M & Coche A 1949, 'New experiments on the cathodic deposition of radio-elements', Journal of the Chemical Society, pp. S397–400
  • Haller EE 2006, Germanium: From its discovery to SiGe devices, http://www.osti.gov/bridge/servlets/purl/922705-bthJo6/922705.pdf
  • Hamm DI 1969, Fundamental concepts of chemistry, Meredith Corporation, New York
  • Hampel CA (ed.) 1968, The encyclopedia of the chemical elements, Reinhold, New York
  • Hampel CA & Hawley GG 1966, The encyclopedia of chemistry, 3rd ed., Van Nostrand Reinhold, New York
  • Hampel CA & Hawley GG 1976, Glossary of chemical terms, Van Nostrand Reinhold, New York
  • Harding C, Johnson DA & Janes R 2002, Elements of the p block, Royal Society of Chemistry, Cambridge, ISBN 0854046909
  • Hasan H 2009, The boron elements: Boron, aluminum, gallium, indium, thallium, The Rosen Publishing Group, New York
  • Hatcher WH 1949, An introduction to chemical science, John Wiley & Sons, New York
  • Hawkes SJ 1999, 'Polonium and astatine are not semimetals', Chem 13 News, February, p. 14
  • Hawkes SJ 2001, 'Semimetallicity', Journal of Chemical Education, vol. 78, no. 12, pp. 1686–87, Bibcode 2001JChEd..78.1686H, doi 10.1021/ed078p1686
  • Hawkes SJ 2010, 'Polonium and astatine are not semimetals', Journal of Chemical Education, vol. 87, no. 8, p. 783, Bibcode 2010JChEd..87..783H, doi 10.1021ed100308w
  • Henderson M 2000, Main group chemistry, The Royal Society of Chemistry, Cambridge
  • Herchenroeder JW & Gschneidner KA 1988, 'Stable, metastable and nonexistent allotropes', Journal of Phase Equilibria, vol. 9, no. 1, pp. 2–12, doi 10.1007/BF02877443
  • Hérold A 2006, 'An arrangement of the chemical elements in several classes inside the periodic table according to their common properties', Comptes Rendus Chimie, vol. 9, pp. 148–153, doi 10.1016/j.crci.2005.10.002
  • Herzfeld K 1927, 'On atomic properties which make an element a metal', Physical Review, vol. 29, no. 5, pp. 701–705, Bibcode 1927PhRv...29..701H, doi 10.1103PhysRev.29.701
  • Hill G & Holman J 2000, Chemistry in context, 5th ed., Nelson Thornes, Cheltenham
  • Hiller LA & Herber RH 1960, Principles of chemistry, McGraw-Hill, New York
  • Hindman JC 1968, 'Neptunium', in CA Hampel (ed.), The encyclopedia of the chemical elements, Reinhold, New York, pp. 432‒437
  • Hinrichs GD 1869, 'On the classification and the atomic weights of the so-called chemical elements, with particular reference to Stas’s determinations', Proceedings of the American Association for the Advancement of Science, vol. 18, pp. 112–124
  • Holt, Rinehart & Wilson c. 2007 'Why polonium and astatine are not metalloids in HRW texts'
  • Hoppe A 2011, Das periodensystem der elemente
  • Horvath 1973, 'Critical temperature of elements and the periodic system', Journal of Chemical Education, vol. 50, no. 5, pp. 335–336, Bibcode 1973JChEd..50..335H, doi 10.1021/ed050p335
  • Housecroft CE & Constable EC 2006, Chemistry, 3rd ed., Pearson Education, Harlow, England
  • Hultgren HH 1966, 'Metalloids', in GL Clark & GG Hawley (eds), The encyclopedia of inorganic chemistry, 2nd ed., Reinhold Publishing, New York
  • Hunt A 2000, The complete A-Z chemistry handbook, 2nd ed., Hodder & Stoughton, London
  • Hutton W & Dickerson RE 1970, A study guide to chemical principles, Benjamin, New York
  • International Textbook Company 1908, International library of technology: a series of textbooks for persons engaged in the engineering professions and trades, or for those who desire information concerning them, vol. 6, part 2, ITC, Scranton, PA
  • IUPAC 1959, Nomenclature of inorganic chemistry, 1st ed., Butterworths, London
  • IUPAC 1971, Nomenclature of inorganic chemistry, 2nd ed., Butterworths, London
  • Jackson CT 1844, Final report of the geology and mineralogy of the State of New Hampshire, with contributions towards the improvement of agriculture and metallurgy, Carroll & Baker, Concord, New Hampshire
  • Jain M (ed.) 2005, 'Group 17 elements [Halogen family]', Competition Science Vision, January, pp. 1455–1461
  • Jenkins GM & Kawamura K 1976, Polymeric carbons—carbon fibre, glass and char, Cambridge University Press, Cambridge
  • Jezequel G & Thomas J 1997, 'Experimental band structure of semimetal bismuth', Physical Review B, vol. 56, no. 11, pp. 6620–6626
  • Johansen G & Mackintosh AR 1970, 'Electronic structure and phase transitions in ytterbium', Solid State Communications, vol. 8, no. 2, pp. 121–124
  • Johnston FJ 1992, 'Metalloid' in McGraw-Hill encyclopedia of science & technology, 7th ed., vol. 11, McGraw-Hill, New York
  • Jorpes JE 1970, Jac. Berzelius: his life and work, trans. B Steele, University of California, Berkeley
  • Jungnickel C & McCormmach R 1996, Cavendish, American Philisophical Society, Philadelphia
  • Kaminow IP & Li T 2002 (eds), Optical fiber telecommunications, Volume IVA, Academic Press, San Diego
  • Kaye GWC & Laby TH 1973, Tables of physical and chemical constants, 14th ed., Longman, London
  • Keller C 1985, 'preface', in HK Kugler HK & C Keller C (eds), Gmelin handbook of inorganic and organometallic chemistry, 8th ed., At Astatine, Springer-Verlag, Berlin
  • Kent W 1950, Kent's mechanical engineers' handbook, 12th ed., vol. 1, John Wiley & Sons, New York
  • King RB (ed.) 2005, Encyclopedia of inorganic chemistry, 2nd ed., John Wiley & Sons, Chichester, p. 6006
  • Kitaĭgorodskiĭ AI 1961, Organic chemical crystallography, Consultants Bureau, New York
  • Klemm W 1950, 'Some problems from the physics and chemistry of halfmetals and metametals', Angewandte Chemie' vol. 62, no. 6, pp. 133–142
  • Klug HP & Brasted RC 1958, Comprehensive inorganic chemistry: The elements and compounds of group IV A, Van Nostrand, New York
  • Kneen WR, Rogers MJW & Simpson P 1972, Chemistry: Facts, patterns, and principles, Addison-Wesley, London
  • Kniep R 1996, 'Eduard Zintl: His life and scholarly work', in SM Kauzlarich (ed.), Chemistry, structure and bonding of Zintl phases and ions, VCH, New York, pp. xvii–xxx, ISBN 1560819006
  • Kotz JC, Treichel P & Weaver GC 2005, Chemistry & chemical reactivity, 6th ed., Brooks/Cole, Belmont, CA
  • Kotz JC, Treichel P & Weaver GC 2009, Chemistry & chemical reactivity, 7th ed., Brooks/Cole, Belmont, CA, ISBN 1439041318
  • Kozyrev PT 1959, 'Deoxidized selenium and the dependence of its electrical conductivity on pressure. II', Physics of the solid state, translation of the journal Solid State Physics (Fizika tverdogo tela) of the Academy of Sciences of the USSR, vol. 1, pp. 102–110
  • Kraig RE, Roundy D & Cohen ML 2004, 'A study of the mechanical and structural properties of polonium', Solid State Communications, vol. 129, issue 6, Feb, pp. 411–413
  • Krishnan S, Ansell S, Felten J, Volin K & Price D 1998, 'Structure of Liquid Boron', Physical Review Letters, vol. 81, no. 3, pp. 586–589, Bibcode 1998PhRvL..81..586K, doi 10.1103/PhysRevLett.81.586
  • Kugler HK & Keller C (eds) 1985, Gmelin handbook of inorganic and organometallic chemistry, 8th ed., At Astatine, Springer-Verlag, Berlin
  • Lewis RJ 1993, Hawley's condensed chemical dictionary, 12th ed., Van Nostrand Reinhold, New York, ISBN 0442011318
  • Lovett DR 1977, Semimetals & narrow-bandgap semi-conductors, Pion, London, ISBN 0850860601
  • Lundgren A & Bensaude-Vincent B 2000, Communicating chemistry: textbooks and their audiences, 1789–1939, Science History, Canton, MA, ISBN 0881352748
  • Lutz J, Schlangenotto H, Scheuermann U, De Doncker R 2011, Semiconductor power devices: Physics, characteristics, reliability, Springer-Verlag, Berlin
  • Mackay KM & Mackay RA 1989, Introduction to modern inorganic chemistry, 4th ed., Blackie, Glasgow
  • Mahan BH & Myers RJ 1987, University chemistry, 4th ed., Benjamin/Cumming, Menlo Park
  • Malerba F 1985, The semiconductor business: The economics of rapid growth and decline, Frances Pinter, London
  • Mann JB, Meek TL & Allen LC 2000, 'Configuration energies of the main group elements, Journal of the American Chemical Society, vol. 122, no. 12, pp 2780–2783, doi 10.1021ja992866e
  • Martienssen W & Warlimont H 2005, Springer handbook of condensed matter and materials data, vol. 1, Springer, Berlin
  • Masterton WL & Slowinski EJ 1977, Chemical principles, 4th ed., W. B. Saunders, Philadelphia
  • Matula RA 1979, 'Electrical resistivity of copper, gold, palladium, and silver,' Journal of Physical and Chemical Reference Data, vol. 8, no. 4, pp. 1147–1298
  • Mayo CA (ed.) 1917, 'Board questions and answers: Questions asked by the Missouri Board of Pharmacy, with correct answers', American Druggist and Pharmaceutical Record, vol. 65, no. 4, April, pp. 53–56
  • McMurray J & Fay RC 2009, General chemistry: Atoms first, Prentice Hall, Upper Saddle River, NJ, ISBN 0321571630
  • McQuarrie DA & Rock PA 1987, General chemistry, 3rd ed., WH Freeman, New York
  • Mendeléeff DI 1897, The principles of chemistry, 5th ed., trans. G Kamensky, AJ Greenaway (ed.), Longmans, Green & Co., London
  • Metcalfe HC, Williams JE & Castka JF 1966, Modern chemistry, 3rd ed., Holt, Rinehart and Winston, New York
  • Metcalfe HC, Williams JE & Castka JF 1974, Modern chemistry, Holt, Rinehart and Winston, New York
  • Metcalfe HC, Williams JE & Castka JF 1982, Modern chemistry, rev. ed., Holt, Rinehart and Winston Publishers, New York, ISBN 0035799102
  • Miessler GL & Tarr DA 2004, Inorganic chemistry, 3rd ed., Pearson Education, Upper Saddle River, NJ
  • Miles WD & Gould RF 1976, American chemists and chemical engineers, vol. 1, American Chemical Society, Washington
  • Millot F, Rifflet JC, Sarou-Kanian V & Wille G 2002, International Journal of Thermophysics, vol. 23, no. 5, pp. 1185–1195, doi 10.1023/A:1019836102776
  • Morita A 1986, 'Semiconducting black phosphorus', Journal of Applied Physics A, vol. 39, pp. 227–242
  • Moss TS 1952, Photoconductivity in the elements, London, Butterworths
  • Murray JF 1928, 'Cable-sheath corrosion', Electrical World, vol. 92, Dec 29, pp. 1295–1297
  • Neuburger MC 1936, 'Gitterkonstanten für das Jahr 1936', Zeitschrift für Kristallographie, vol. 93, pp. 1‒36
  • Nickelès J 1861, 'On a new characteristic of the so-called semi-metals', American Journal of Science, vol. 82, p. 416
  • NIST (National Institute of Standards and Technology) 2010, Ground levels and ionization energies for neutral atoms, by WC Martin, A Musgrove, S Kotochigova, & JE Sansonetti
  • NIST (National Institute of Standards and Technology) 2011
  • Nordell KJ & Miller GJ 1999, 'Linking intermetallics and Zintl compounds: An investigation of ternary trielides (Al, Ga, In) forming the NaZn13 structure type', Inorganic Chemistry, vol. 38, no. 3, pp. 579–590
  • Norman NC 1997, Periodicity and the s- and p-block elements, Oxford University, Oxford
  • Oberleas D, Harland BF & Harland B 1999, Minerals: Nutrition and metabolism, Vantage Press, New York
  • Obrist B 1990, Constantine of Pisa. The book of the secrets of alchemy: a mid-13th century survey of natural science, E J Brill, Leiden, The Netherlands
  • Oderberg DS 2007, Real essentialism, Routledge, New York
  • Ogata S, Li J & Yip S 2002, 'Ideal pure shear strength of aluminium and copper', Science, vol. 298, 25 October, pp. 807–810
  • Okakjima Y & Shomoji M 1972, Viscosity of dilute amalgams', Transactions of the Japan Institute of Metals, vol. 13, no. 4, pp. 255–258
  • Olmsted J & Williams GM 1997, Chemistry, the molecular science, 2nd ed., Wm C Brown, Dubuque, Iowa
  • Oxford English Dictionary 1989, 2nd ed., Oxford University, Oxford
  • Oxtoby DW, Gillis HP & Campion A 2008, Principles of modern chemistry, 6th ed., Thomson Brooks/Cole, Belmont, CA
  • Parish RV 1977, The metallic elements, Longman, London
  • Partington JR 1964, A history of chemistry, vol. 4, Macmillan, London
  • Pashaey BP & Seleznev VV 1973, 'Magnetic susceptibility of gallium-indium alloys in liquid state', Russian Physics Journal, vol. 16, no. 4, pp. 565–566
  • Paul BH 1865, 'Metals and metallöids', in H Watts (ed.), A dictionary of chemistry and the allied branches of other science, vol. 3, Longman, Green, Roberts & Green, London, pp. 933–946
  • Pauling L 1947, General chemistry: An introduction to descriptive chemistry and modern chemical theory, WH Freeman, San Francisco
  • Pauling L 1988, General chemistry, Dover Publications, NY, ISBN 0486656225
  • Pearson WB 1972, The crystal chemistry and physics of metals and alloys, Wiley-Interscience, New York
  • Petty MC 2007, Molecular electronics: From principles to practice, vol. 22 of Wiley series in materials for electronic and optoelectronic applications, John Wiley and Sons, New York
  • Phillips CSG & Williams RJP 1965, Inorganic chemistry, I: Principles and non-metals, Clarendon Press, Oxford
  • Pitzer K 1975, 'Fluorides of radon and elements 118', Journal of the Chemical Society, Chemical Communications, no. 18, pp. 760–761
  • Pottenger FM & Bowes EE 1976, Fundamentals of chemistry, Scott, Foresman and Co., Glenview, Illinois
  • Rao CNR & Ganguly P 1986, 'A new criterion for the metallicity of elements', Solid State Communications, vol. 57, no. 1, pp. 5–6, Bibcode 1986SSCom..57....5R, doi 10.1016/0038-1098(86)90659-9
  • Rao KY 2002, Structural chemistry of glasses, Elsevier, Oxford
  • Rausch MD 1960, 'Cyclopentadienyl compounds of metals and metalloids', Journal of Chemical Education, vol. 37, no. 11, pp. 568–578, Bibcode 1960JChEd..37..568R, doi 10.1021/ed037p568
  • Rayner-Canham G & Overton T 2006, Descriptive inorganic chemistry, 4th ed., WH Freeman, New York
  • Regnault MV 1853, Elements of chemistry, vol. 1, 2nd ed., Clark & Hesser, Philadelphia
  • Reid JS 2002, "Mems with flexible portions made of novel materials", US Patent Application 2002/0185699 A1
  • Reilly C 2002, Metal contamination of food, Blackwell Science, Oxford, ISBN 0632059273
  • Reilly 2004, The nutritional trace metals, Blackwell, Oxford, ISBN 1405110406
  • Remy H 1956, Treatise on inorganic chemistry, vol. II, Elsevier, Amsterdam
  • Rochow EG 1957, The chemistry of organometallic compounds, John Wiley & Sons, New York
  • Rochow EG 1966, The metalloids, DC Heath and Company, Boston
  • Rochow EG 1977, Modern descriptive chemistry, Saunders, Philadelphia.
  • Rock PA & Gerhold GA 1974, Chemistry: Principles and applications, WB Saunders, Philadelphia
  • Roher GS 2001, Structure and bonding in crystalline materials, Cambridge University Press, Cambridge, ISBN 0521663792
  • Roscoe HE & Schorlemmer FRS 1894, A treatise on chemistry: Volume II: The metals, D Appleton, New York
  • Rossler K 1985, 'Handling of astatine', in HK Kugler HK & C Keller C (eds), Gmelin handbook of inorganic and organometallic chemistry, 8th ed., At Astatine, Springer-Verlag, Berlin
  • Rothenberg GB 1976, Glass technology, recent developments, Noyes Data Corporation, Park Ridge, NJ
  • <span id="Rouvray1995"Rouvray DH 1995, 'That fuzzy feeling in chemistry', Chemistry in Britain, vol. 31, no. 71, pp. 544–546
  • Roza G 2009, Bromine, Rosen Publishing, New York, ISBN 1435850688
  • Russell JB 1981, General chemistry, McGraw-Hill, Auckland
  • Russell AM & Lee KL 2005, Structure-property relations in nonferrous metals, Wiley-Interscience, New York
  • Sacks O 2001, Uncle Tungsten: Memories of a chemical boyhood, Alfred A. Knopf, New York
  • Samsonov GV 1968, Handbook of the physiochemical properties of the elements, I F I/Plenum, New York
  • Sanderson RT 1957, 'An electronic distinction between metals and nonmetals', Journal of Chemical Education, vol. 34, no. 5, p. 229
  • Sanderson RT 1960, Chemical periodicity, Reinhold Publishing, New York
  • Schaefer JC 1968, 'Boron' in CA Hampel (ed.), The encyclopedia of the chemical elements, Reinhold, New York, pp. 73–81
  • Schaffter SR 2006, The chemistry student's companion, Birmingham Laboratories Press, Reseda
  • Schmidbaur H & Schier A 2008, 'A briefing on aurophilicity,' Chemical Society Reviews, vol. 37, pp. 1931–1951
  • Schrobilgen GJ 2011, 'radon (Rn)', in Encyclopædia Britannica, accessed 7 Aug 2011
  • Schwietzer GK and Pesterfield LL 2010, The aqueous chemistry of the elements, Oxford University, Oxford ISBN 019539335X
  • Scott EC & Kanda FA 1962, The nature of atoms and molecules: A general chemistry, Harper & Row, New York
  • Segal BG 1989, Chemistry: experiment and theory, 2nd ed., John Wiley & Sons, New York ISBN 0471849294
  • Selwood PW 1965, General chemistry, 4th ed., Holt, Rinehart and Winston, New York
  • Sharp DWA 1981, 'Metalloids', in Miall's dictionary of chemistry, 5th ed, Longman, Harlow
  • Sherman E & Weston GJ 1966, Chemistry of the non-metallic elements, Pergamon Press, New York
  • Sidorov TA 1960, 'The connection between structural oxides and their tendency to glass formation', Glass and Ceramics, vol. 17, no. 11, pp. 599–603, doi 10.1007BF00670116
  • Siebring BR 1967, Chemistry, MacMillan, New York
  • Siekierski S & Burgess J 2002, Concise chemistry of the elements, Horwood, Chichester, ISBN 1898563713
  • Silberberg MS 2002, Chemistry: the molecular nature of matter and change, 3rd ed., McGraw-Hill, New York
  • Simple Memory Art c. 2005, Periodic table, EVA vinyl shower curtain, San Francisco
  • Sisler HH 1973, Electronic structure, properties, and the periodic law, Van Nostrand, New York
  • Slade S 2006, Elements and the periodic table, The Rosen Publishing Group, New York, ISBN 1404221654
  • Slough W 1972, 'Discusssion of session 2b: Crystal structure and bond mechanism of metallic compounds', in O Kubaschewski (ed.), Metallurgical chemistry, proceedings of a symposium held at Brunel University and the National Physical Laboratory on the 14, 15 and 16 July 1971, Her Majesty's Stationery Office [for the] National Physical Laboratory, London
  • Smith A 1906, Introduction to general inorganic chemistry, The Century Company, New York
  • Smith R 1994, Conquering chemistry, 2nd ed., McGraw-Hill, Sydney, ISBN 0074701460
  • Sólyom J 2008, p. 91 Fundamentals of the physics of solids: Electronic properties, Springer-Verlag, Berlin, ISBN 3540853154
  • Steele D 1966, The chemistry of the metallic elements, Pergamon Press, Oxford
  • Stein L 1969, 'Oxidized radon in halogen fluoride solutions', Journal of the American Chemical Society, vol. 19, no. 19, pp. 5396–5397
  • Stein L 1985, 'New evidence that radon is a metalloid element: ion-exchange reactions of cationic radon', Journal of the Chemical Society, Chemical Communications, vol. 22, pp. 1631–1632, doi 10.1039/C39850001631
  • Stein L 1987, 'Chemical properties of radon' in PK Hopke (ed.) 1987, Radon and its decay products: Occurrence, properties, and health effects, American Chemical Society, Washington DC, pp. 240–251, ISBN 0841210152
  • Steudel R 1977, Chemistry of the non-metals: With an introduction to atomic structure and chemical bonding, Walter de Gruyter, Berlin
  • Stoker HS 2010, General, organic, and biological chemistry, 5th ed., Brooks/Cole, Cengage Learning, Belmont CA
  • Stott RW 1956, A companion to physical and inorganic chemistry, Longmans, Green and Co., London
  • Strathern P 2000, Mendeleyev’s dream: the quest for the elements, Berkley Books, New York, ISBN 0312262043
  • Swalin RA 1962, Thermodynamics of solids, John Wiley & Sons, New York
  • Swenson J 2005, 'Classification of noble gases', in Ask a scientist, Chemistry archive
  • Swift EH & Schaefer WP 1962, Qualitative elemental analysis, WH Freeman, San Francisco
  • Synder MK 1966, Chemistry: structure and reactions, Holt, Rinehart and Winston, New York
  • Szabó ZG & Lakatos B 1954, 'The new form of the periodic table and new periodic functions', Acta Chimica Academiae Scientiarum Hungaricae, IV 2–4, p. 133
  • Taniguchi M, Suga S, Seki M, Sakamoto H, Kanzaki H, Akahama Y, Endo S, Terada S & Narita S 1984, 'Core-exciton induced resonant photemission in the covalent semiconductor black phosphorus', Solid State Communications, vo1. 49, no. 9, pp. 867–870
  • Tarendash AS 2001, Let's review: Chemistry, the physical setting, Barron's Educational Series, Hauppauge, New York, ISBN 0764116649
  • Taylor MD 1960, First principles of chemistry, D. Van Nostrand, Princeton, New Jersey
  • Thayer JS 1977, 'Teaching bio-organometal chemistry. I. The metalloids', Journal of Chemical Education, vol. 54, no. 10, pp. 604–06, Bibcode 1977JChEd..54..604T, doi 10.1021/ed054p604
  • The American heritage science dictionary 2005, Houghton Mifflin Harcourt, Boston, ISBN 0618455043
  • The Chemical News 1897, 'Notices of books: A manual of chemistry, theoretical and practical, by WA Tilden', vol. 75, no. 1951, p. 189
  • The Chemical News and Journal of Physical Science 1864, 'Notices of books: Manual of the metalloids', Jan 9, p. 22
  • The Chemical News and Journal of Physical Science 1888, ‘Books received: The students’ hand book of chemistry’, Jan 6, p. 11
  • Thompson R 1999, 'Re: What is the metalloid line and where is it located on the Periodic Table?', MadSci Network
  • Thomson T 1830, The history of chemistry, volumes 1–2, Henry Colburn, and Richard Bentley, London
  • Tilden WA 1876, Introduction to the study of chemical philosophy, D. Appleton and Co., New York
  • Tilley RJD 2004, Understanding solids: The science of materials, 4th ed., John Wiley, New York
  • Tuthill G 2011, 'Faculty Profile: Elements of Great Teaching', The Iolani School Bulletin, Winter, viewed 29 October 2011
  • Tweney CF & Shirshov IP 1935, Hutchinson’s technical & scientific encyclopaedia, vol. 3, Macmillan, London
  • Tyler PM 1948, From the ground up: facts and figures of the mineral industries of the United States, McGraw-Hill, New York
  • United States Bureau of Naval Personnel 1965, Shipfitter 3 & 2, US Government Printing Office, Washington
  • United States Air Force Medical Service 1966, The pharmacy technician, Department of the Air Force, Washington, p. 3-3
  • Vasáros L & Berei K 1985, 'General properties of astatine', in HK Kugler HK & C Keller C (eds), Gmelin handbook of inorganic and organometallic chemistry, 8th ed., At Astatine, Springer-Verlag, Berlin
  • Van der Put PJ 1998, The inorganic chemistry of materials: how to make things out of elements, Plenum, New York
  • Van Setten MJ, Uijttewaal MA, de Wijs GA & Groot RA 2007, 'Thermodynamic stability of boron: The role of defects and zero point motion', Journal of the American Chemical Society, vol. 129, pp. 2458‒65
  • Walker J 1891, 'On the periodic tabulation of the elements', The Chemical News, vol. LXIII, no. 1644, May 29, pp. 251–253
  • Walters D 1982, Chemistry, Franklin Watts Science World series, Franklin Watts, London, ISBN 0531045811
  • Warren J & Geballe T 1981, 'Research opportunities in new energy-related materials', Materials Science and Engineering, vol. 50, no. 2, doi 10.1016/0025-5416(81)90177-4
  • Webster's New International Dictionary 1926, 'metalloid', G & C Merriam, Springfield, Mass.
  • Whitley K 2009, Periodic table: Metals, non-metals, and semi-metals
  • Whitten KW, Davis RE & Peck LM 2003, A qualitative analysis supplement, 7th ed., Thomson Brooks/Cole, Belmont, CA
  • Whitten KW, Davis RE, Peck LM & Stanley GG 2007, Chemistry, 8th ed., Thomson Brooks/Cole, Belmont, CA
  • Wiberg N 2001, Inorganic chemistry, Academic Press, San Diego ISBN 0123526515
  • Wilson AH 1939, Semi-conductors & metals: An introduction to the electron theory of metals, Cambridge University, London
  • Wilson JR 1965, 'The structure of liquid metals and alloys', Metallurgical reviews, vol. 10, p. 502
  • Wilson AH 1966, Thermodynamics and statistical mechanics, Cambridge University, Cambridge
  • Wittenberg LJ 1972, 'Volume contraction during melting; emphasis on lanthanide and actinide metals', The Journal of Chemical Physics, vol. 56, no. 9, p. 4526, Bibcode 1972JChPh..56.4526W, doi 10.1063/1.1677899
  • Witt AF & Gatos HC 1968, 'Germanium', in CA Hampel (ed.), The encyclopedia of the chemical elements, Reinhold, New York, pp. 237‒244
  • Woodward WE 1948, Engineering metallurgy, Constable, London
  • Wulfsberg G 1991, Principles of descriptive inorganic chemistry, Brooks/Cole, Monterey CA, ISBN 0935702660
  • Wulfsberg G 2000, Inorganic chemistry, University Science Books, Sausalito CA, ISBN 1891389017
  • Yacobi BG & Holt DB 1990, Cathodoluminescence microscopy of inorganic solids, Plenum, New York
  • Young TF, Finley K, Adams WF, Besser J, Hopkins WD, Jolley D, McNaughton E, Presser TS, Shaw DP & Unrine J 2010, 'What you need to know about selenium', in PM Chapman, WJ Adams, M Brooks, CJ Delos, SN Luoma, WA Maher, H Ohlendorf, TS Presser & P Shaw (eds), Ecological assessment of selenium in the aquatic environment, CRC, Boca Raton, Florida, pp.7–45, ISBN 1439826773
  • Young RV & Sessine S (eds) 2000, World of chemistry, Gale Group, Farmington Hills, Michigan

Monographs

  • Chedd G 1969, Half-way elements: The technology of metalloids, Doubleday, New York
  • Dunstan S 1968, 'The metalloids', in Principles of chemistry, D. Van Nostrand Company, London, pp. 407–439
  • Goldsmith RH 1982, 'Metalloids', Journal of Chemical Education, vol. 59, no. 6, pp. 526–527, Bibcode 1982JChEd..59..526G, doi 10.1021/ed059p526
  • Hawkes SJ 2001, 'Semimetallicity', Journal of Chemical Education, vol. 78, no. 12, pp. 1686–87, Bibcode 2001JChEd..78.1686H, doi 10.1021/ed078p1686
  • Rochow EG 1966, The metalloids, DC Heath and Company, Boston

Wikimedia Foundation. 2010.

Игры ⚽ Нужен реферат?

Look at other dictionaries:

  • metalloid — [met′ə loid΄] n. 1. NONMETAL 2. an element having some of, but not all, the properties of metals, as arsenic or silicon adj. 1. like a metal in appearance 2. of, or having the nature of, a metalloid …   English World dictionary

  • Metalloid — Met al*loid, n. [L. metallum metal + oid: cf. F. m[ e]tallo[ i]de.] (a) Formerly, the metallic base of a fixed alkali, or alkaline earth; applied by Sir Humphrey Davy to sodium, potassium, and some other metallic substances whose metallic… …   The Collaborative International Dictionary of English

  • Metalloid — Met al*loid, a. 1. Having the appearance of a metal. [1913 Webster] 2. (Chem.) Having the properties of a nonmetal; nonmetallic; acid; negative. [1913 Webster] …   The Collaborative International Dictionary of English

  • metalloid — UK [ˈmetəlɔɪd] / US noun [countable] Word forms metalloid : singular metalloid plural metalloids chemistry a chemical element such as silicon that is not a metal but that has some of the qualities that a metal has Derived word: metalloid UK / US… …   English dictionary

  • metalloid — Resembling a metal in at least one amphoteric form; e.g., silicon and germanium as semiconductors. [metal + G. eidos, resemblance] * * * met·al·loid met əl .ȯid n an element (as boron, silicon, or arsenic) intermediate in properties between the… …   Medical dictionary

  • Metalloid — metaloidas statusas T sritis fizika atitikmenys: angl. metalloid vok. Metalloid, n rus. металлоид, m pranc. métalloïde, m …   Fizikos terminų žodynas

  • metalloid — metaloidas statusas T sritis fizika atitikmenys: angl. metalloid vok. Metalloid, n rus. металлоид, m pranc. métalloïde, m …   Fizikos terminų žodynas

  • metalloid — I. noun Date: 1813 1. an element intermediate in properties between the typical metals and nonmetals 2. a nonmetal that can combine with a metal to form an alloy II. adjective also metalloidal Date: 1836 1. resembling a metal 2. of, relating to,… …   New Collegiate Dictionary

  • metalloid — /met l oyd /, n. 1. a nonmetal that in combination with a metal forms an alloy. 2. an element that has both metallic and nonmetallic properties, as arsenic, silicon, or boron. adj. 3. of or pertaining to a metalloid. 4. resembling both a metal… …   Universalium

  • metalloid — met·al·loid || metÉ™lɔɪd n. element which is both metallic and nonmetallic; nonmetal adj. of metalloid (element which is both metallic and non metallic); resembling both a metal and a nonmetal …   English contemporary dictionary

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”