Chemical substance

Chemical substance
Steam and liquid water are two different forms of the same chemical substance, water.

In chemistry, a chemical substance is a form of matter that has constant chemical composition and characteristic properties.[1] It cannot be separated into components by physical separation methods, i.e. without breaking chemical bonds. They can be solids, liquids or gases.

Chemical substances are often called 'pure' to set them apart from mixtures. A common example of a chemical substance is pure water; it has the same properties and the same ratio of hydrogen to oxygen whether it is isolated from a river or made in a laboratory. Other chemical substances commonly encountered in pure form are diamond (carbon), gold, table salt (sodium chloride) and refined sugar (sucrose). However, simple or seemingly pure substances found in nature can in fact be mixtures of chemical substances. For example, tap water may contain small amounts of dissolved sodium chloride and compounds containing iron, calcium and many other chemical substances.

Chemical substances exist as solids, liquids, gasses, or plasma and may change between these phases of matter with changes in temperature or pressure. Chemical reactions convert one chemical substance into another.

Forms of energy, such as light and heat, are not considered to be matter, and thus they are not "substances" in this regard.

Contents

Definition

A colorful group of chemicals

Chemical substances (also called pure substances) are often defined as "any material with a definite chemical composition" in most introductory general chemistry textbooks.[2] According to this definition a chemical substance can either be a pure chemical element or a pure chemical compound. But, there are exceptions to this definition; a pure substance can also be defined as a form of matter that has both definite composition and distinct properties.[3] The chemical substance index published by CAS also includes several alloys of uncertain composition.[4] Non-stoichiometric compounds are a special case (in inorganic chemistry) that violates the law of constant composition, and for them, it is sometimes difficult to draw the line between a mixture and a compound, as in the case of palladium hydride. Broader definitions of chemicals or chemical substances can be found, for example: "the term 'chemical substance' means any organic or inorganic substance of a particular molecular identity, including – (i) any combination of such substances occurring in whole or in part as a result of a chemical reaction or occurring in nature"[5]

History

The concept of a "chemical substance" became firmly established in the late eighteenth century after work by the chemist Joseph Proust on the composition of some pure chemical compounds such as basic copper carbonate.[6] He deduced that, "All samples of a compound have the same composition; that is, all samples have the same proportions, by mass, of the elements present in the compound." This is now known as the law of constant composition.[7] Later with the advancement of methods for chemical synthesis particularly in the realm of organic chemistry; the discovery of many more chemical elements and new techniques in the realm of analytical chemistry used for isolation and purification of elements and compounds from chemicals that led to the establishment of modern chemistry, the concept was defined as is found in most chemistry textbooks. However, there are some controversies regarding this definition mainly because the large number of chemical substances reported in chemistry literature need to be indexed.

Chemical elements

An element is a chemical substance that is made up of a particular kind of atoms and hence cannot be broken down or transformed by a chemical reaction into a different element, though it can be transmutated into another element through a nuclear reaction. This is so, because all of the atoms in a sample of an element have the same number of protons, though they may be different isotopes, with differing numbers of neutrons.

There are about 120 known elements, about 80 of which are stable – that is, they do not change by radioactive decay into other elements. However, the number of chemical substances that are elements can be more than 120, because some elements can occur as more than a single chemical substance (allotropes). For instance, oxygen exists as both diatomic oxygen (O2) and ozone (O3). The majority of elements are classified as metals. These are elements with a characteristic lustre such as iron, copper, and gold. Metals typically conduct electricity and heat well, and they are malleable and ductile.[8] Around a dozen elements,[9] such as carbon, nitrogen, and oxygen, are classified as non-metals. Non-metals lack the metallic properties described above, they also have a high electronegativity and a tendency to form negative ions. Certain elements such as silicon sometimes resemble metals and sometimes resemble non-metals, and are known as metalloids.

Chemical compounds

A pure chemical compound is a chemical substance that is composed of a particular set of molecules or ions. Two or more elements combined into one substance through a chemical reaction form a chemical compound. All compounds are substances, but not all substances are compounds.

A chemical compound can be either atoms bonded together in molecules or crystals in which atoms, molecules or ions form a crystalline lattice. Compounds based primarily on carbon and hydrogen atoms are called organic compounds, and all others are called inorganic compounds. Compounds containing bonds between carbon and a metal are called organometallic compounds.

Compounds in which components share electrons are known as covalent compounds. Compounds consisting of oppositely charged ions are known as ionic compounds, or salts.

In organic chemistry, there can be more than one chemical compound with the same composition and molecular weight. Generally, these are called isomers. Isomers usually have substantially different chemical properties, may be isolated and do not spontaneously convert to each other. A common example is glucose vs. fructose. The former is an aldehyde, the latter is a ketone. Their interconversion requires either enzymatic or acid-base catalysis. However, there are also tautomers, where isomerization occurs spontaneously, such that a pure substance cannot be isolated into its tautomers. A common example is glucose, which has open-chain and ring forms. One cannot manufacture pure open-chain glucose because glucose spontaneously cyclizes to the hemiacetal form.

Substances versus mixtures

All matter consists of various elements and chemical compounds, but these are often intimately mixed together. Mixtures contain more than one chemical substance, and they do not have a fixed composition. In principle, they can be separated into the component substances by purely mechanical processes. Butter, soil and wood are common examples of mixtures.

Grey iron metal and yellow sulfur are both chemical elements, and they can be mixed together in any ratio to form a yellow-grey mixture. No chemical process occurs, and the material can be identified as a mixture by the fact that the sulfur and the iron can be separated by a mechanical process, such as using a magnet to attract the iron away from the sulfur.

In contrast, if iron and sulfur are heated together in a certain ratio (1 atom of iron for each atom of sulfur, or by weight, 56 grams (1 mol) of iron to 32 grams (1 mol) of sulfur), a chemical reaction takes place and a new substance is formed, the compound iron(II) sulfide, with chemical formula FeS. The resulting compound has all the properties of a chemical substance and is not a mixture. Iron(II) sulfide has its own distinct properties such as melting point and solubility, and the two elements cannot be separated using normal mechanical processes; a magnet will be unable to recover the iron, since there is no metallic iron present in the compound.

Chemicals versus chemical substances

While the term chemical substance is a precise technical term that is synonymous with "chemical" for professional chemists, the meaning of the word chemical varies for non-chemists within the English speaking world or those using English. For industries, government and society in general in some countries,[10] the word chemical includes a wider class of substances that contain many mixtures of such chemical substances, often finding application in many vocations.[11] In countries that require a list of ingredients in products, the "chemicals" listed would be equated with "chemical substances".[12]

Within the chemical industry, manufactured "chemicals" are chemical substances, which can be classified by production volume into bulk chemicals, fine chemicals and chemicals found in research only. Bulk chemicals are produced in very large quantities, usually with highly optimized continuous processes and to a relatively low price. Fine chemicals are produced at a high cost in small quantities for special low-volume applications such as biocides, pharmaceuticals and speciality chemicals for technical applications. Research chemicals are produced individually for research, such as when searching for synthetic routes or screening substances for pharmaceutical activity. In effect, their price per gram is very high, although they are not sold. The cause of the difference in production volume is the complexity of the molecular structure of the chemical. Bulk chemicals are usually much less complex. While fine chemicals may be more complex, many of them are simple enough to be sold as "building blocks" in the synthesis of more complex molecules targeted for single use, as named above. The production of a chemical includes not only its synthesis but also its purification to eliminate by-products and impurities involved in the synthesis. The last step in production should be the analysis of batch lots of chemicals in order to identify and quantify the percentages of impurities for the buyer of the chemicals. The required purity and analysis depends on the application, but higher tolerance of impurities is usually expected in the production of bulk chemicals. Thus, the user of the chemical in the US might chose between the bulk or "technical grade" with higher amounts of impurities or a much purer "pharmaceutical grade" (labeled "USP", United States Pharmacopeia).

Naming and indexing

Every chemical substance has one or more systematic names, usually named according to the IUPAC rules for naming. An alternative system is used by the Chemical Abstracts Service (CAS).

Many compounds are also known by their more common, simpler names, many of which predate the systematic name. For example, the long-known sugar glucose is now systematically named 6-(hydroxymethyl)oxane-2,3,4,5-tetrol. Natural products and pharmaceuticals are also given simpler names, for example the mild pain-killer Naproxen is the more common name for the chemical compound (S)-6-methoxy-α-methyl-2-naphthaleneacetic acid.

Chemists frequently refer to chemical compounds using chemical formulae or molecular structure of the compound. There has been a phenomenal growth in the number of chemical compounds being synthesized (or isolated), and then reported in the scientific literature by professional chemists around the world.[13] An enormous number of chemical compounds are possible through the chemical combination of the known chemical elements. As of May 2011, about sixty million chemical compounds are known.[14] The names of many of these compounds are often nontrivial and hence not very easy to remember or cite accurately. Also it is difficult to keep the track of them in the literature. Several international organizations like IUPAC and CAS have initiated steps to make such tasks easier. CAS provides the abstracting services of the chemical literature, and provides a numerical identifier, known as CAS registry number to each chemical substance that has been reported in the chemical literature (such as chemistry journals and patents). This information is compiled as a database and is popularly known as the Chemical substances index. Other computer-friendly systems that have been developed for substance information, are: SMILES and the International Chemical Identifier or InChI.

Identification of a typical chemical substance
Common name Systematic name Chemical formula Chemical structure CAS registry number InChI
alcohol, or
ethyl alcohol
ethanol C2H5OH
Ethanol-2D-skeletal.png
[64-17-5] 1/C2H6O/c1-2-3/h3H,2H2,1H3

Isolation, purification, characterization, and identification

Often a pure substance needs to be isolated from a mixture, for example from a natural source (where a sample often contains numerous chemical substances) or after a chemical reaction (which often give mixtures of chemical substances).

See also

Notes and references

  1. ^ IUPAC, Compendium of Chemical Terminology, 2nd ed. (the "Gold Book") (1997). Online corrected version:  (2006–) "Chemical Substance".
  2. ^ Hill, J. W.; Petrucci, R. H.; McCreary, T. W.; Perry, S. S. General Chemistry, 4th ed., p5, Pearson Prentice Hall, Upper Saddle River, New Jersey, 2005
  3. ^ Pure Substance – DiracDelta Science & Engineering Encyclopedia
  4. ^ Appendix IV: Chemical Substance Index Names
  5. ^ "What is the TSCA Chemical Substance Inventory?". US Environmental Protection Agency. http://www.epa.gov/oppt/newchems/pubs/invntory.htm. Retrieved 2009-10-19. 
  6. ^ Hill, J. W.; Petrucci, R. H.; McCreary, T. W.; Perry, S. S. General Chemistry, 4th ed., p37, Pearson Prentice Hall, Upper Saddle River, New Jersey, 2005.
  7. ^ Law of Definite Proportions
  8. ^ Hill, J. W.; Petrucci, R. H.; McCreary, T. W.; Perry, S. S. General Chemistry, 4th ed., pp 45–46, Pearson Prentice Hall, Upper Saddle River, New Jersey, 2005.
  9. ^ The boundary between metalloids and non-metals is imprecise, as explained in the previous reference.
  10. ^ What is a chemical
  11. ^ BfR – Chemicals
  12. ^ There is only one definition for "chemical", that of a substance, in the US Unabridged Edition of the Random House Dictionary of the English Language, New York, 1966.
  13. ^ Coping with the Growth of Chemical Knowledge: Challenges for Chemistry Documentation, Education, and Working Chemists
  14. ^ Chemical Abstracts substance count

Wikimedia Foundation. 2010.

Игры ⚽ Поможем решить контрольную работу

Look at other dictionaries:

  • chemical substance — index drug Burton s Legal Thesaurus. William C. Burton. 2006 …   Law dictionary

  • chemical substance — cheminė medžiaga statusas Aprobuotas sritis aplinkos apsauga apibrėžtis Natūralus ar dirbtinis cheminis elementas arba cheminių elementų junginys, įskaitant priedus, reikalingus gaminio stabilumui išlaikyti, ir priemaišas, atsirandančias gaminant …   Lithuanian dictionary (lietuvių žodynas)

  • chemical substance — cheminė medžiaga statusas T sritis chemija apibrėžtis Bet kuris cheminis elementas ar junginys, egzistuojantis natūraliai arba pagamintas. atitikmenys: angl. chemical substance rus. химическое вещество …   Chemijos terminų aiškinamasis žodynas

  • chemical substance — cheminė medžiaga statusas T sritis ekologija ir aplinkotyra apibrėžtis Natūralus arba gamybos procese gautas cheminis elementas ar jų junginys, įskaitant priedus, reikalingus tų gaminių stabilumui išlaikyti ir visas gamybos procese atsirandančias …   Ekologijos terminų aiškinamasis žodynas

  • chemical substance — noun material produced by or used in a reaction involving changes in atoms or molecules • Syn: ↑chemical • Derivationally related forms: ↑chemical (for: ↑chemical) • Hypernyms: ↑material, ↑ …   Useful english dictionary

  • chemical substance — noun A material with a specific chemical composition …   Wiktionary

  • classification of chemical substance and preparation — cheminių medžiagų ir preparatų klasifikavimas statusas Aprobuotas sritis aplinkos apsauga apibrėžtis Cheminių medžiagų ir preparatų priskyrimas vienai ar daugiau pavojingumo kategorijų pagal jų savybes bei priskyrimas cheminei medžiagai ir… …   Lithuanian dictionary (lietuvių žodynas)

  • Chemical energy — is the potential of a chemical substance to undergo a transformation through a chemical reaction or, to transform other chemical substances. Breaking or making of chemical bonds involves energy, which may be either absorbed or evolved from a… …   Wikipedia

  • Chemical stability — when used in the technical sense in chemistry, means thermodynamic stability of a chemical system.[1] Thermodynamic stability occurs when a system is in its lowest energy state, or chemical equilibrium with its environment. This may be a dynamic… …   Wikipedia

  • Chemical thermodynamics — is the study of the interrelation of heat and work with chemical reactions or with physical changes of state within the confines of the laws of thermodynamics. Chemical thermodynamics involves not only laboratory measurements of various… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”