.303 British

.303 British
.303 British (7.7x56mm Rimmed)
.303ammunition.jpeg
.303 Cartridge (Mk VII), manufactured by CAC in 1945
Type Rifle
Place of origin United Kingdom United Kingdom
Specifications
Case type Rimmed, bottleneck
Bullet diameter 0.311 in (7.9 mm)
Neck diameter 0.338 in (8.6 mm)
Shoulder diameter 0.401 in (10.2 mm)
Base diameter 0.460 in (11.7 mm)
Rim diameter 0.540 in (13.7 mm)
Rim thickness .064 in (1.6 mm)
Case length 2.222 in (56.4 mm)
Overall length 3.075 in (78.1 mm)
Case capacity 55.7 gr H2O (3.621 cm³)
Rifling twist 1-10 inches (250 mm)
Primer type Large rifle
Maximum pressure 49,000 psi
Maximum CUP 45,000 CUP
Ballistic performance
Bullet weight/type Velocity Energy
150 gr (9.7 g) SP 844 m/s (2,770 ft/s) 3,463 J (2,554 ft·lbf)
174 gr (11.3 g) HPBT 761 m/s (2,500 ft/s) 3,265 J (2,408 ft·lbf)
180 gr (12 g) SP 783 m/s (2,570 ft/s) 3,574 J (2,636 ft·lbf)
Test barrel length: 24
Source(s): Accurate Powder [1]
.303 British cartridge dimensions.

.303 British, or 7.7x56mmR, is a .311 inch calibre rifle and machine gun cartridge first developed in Britain as a blackpowder round put into service in December 1888 for the Lee-Metford rifle, later adapted to use smokeless powders. It was the standard British and Commonwealth military cartridge from 1889 until the 1950s when it was replaced by the 7.62x51mm NATO.

Contents

Cartridge Specification

Case measurements

The measurement .303-inch (7.7 mm) is the nominal size of the bore measured between the lands which follows the older blackpowder nomenclature. Measured between the grooves, the nominal size of the bore is .311-inch (7.9 mm). Bores for many .303 military surplus rifles are often found ranging from around .309-inch (7.8 mm) up to .318-inch (8.1 mm). Recommended bullet diameter for standard .303 cartridges is .312-inch (7.9 mm).[2]

Gunpowder

The original .303 service cartridge employed black powder as a propellant, and was adopted for the Lee-Metford rifle, which had rifling designed to lessen fouling from this propellant. The Lee-Metford was used as a trial platform by the British Committee on Explosives to experiment with many different smokeless powders then coming to market, including Ballistite, Cordite, and Rifleite.[3][4][5] Ballistite was a stick-type smokeless powder composed of soluble nitrocellulose and nitroglycerine.[5] Cordite was a stick-type or 'chopped' smokeless gunpowder composed of nitroglycerine, gun-cotton, and mineral jelly, while Rifleite was a true nitrocellulose powder, composed of soluble and insoluble nitrocellulose, phenyl amidazobense, and volatiles similar to French smokeless powders.[4][5] Unlike Cordite, Riflelite was a flake powder, and contained no nitroglycerine.[5] Excessive wear of the shallow Lee-Metford rifling with all smokeless powders then available caused ordnance authorities to institute a new type of barrel rifling designed to increase barrel life; the rifle was referred to thereafter as the Lee-Enfield.[3] After extensive testing, the Committee on Explosives selected Cordite for use in the Mark II .303 British service cartridge.[3]

Bullet

The initial .303 Mark I and Mk II service cartridges employed a 215-grain, round-nosed, cupro-nickel full metal jacketed bullet over a lead core. After tests determined that the service bullet had too thin a jacket when used with cordite, the Mk II bullet was introduced, with a flat base and thicker cupro-nickel jacket.[6]

History and development

The .303 cartridge has seen much sporting use with surplus military rifles, especially in Australia, Canada, New Zealand and to a lesser extent, in the United States and South Africa. In Canada, it was found to be adequate for any game except the great bears. In Australia, it was common for military rifles to be re-barreled in .303/25 and .303/22. In South Africa .303 British Lee Enfield rifles captured by the Boers during the Boer War were adapted for sporting purposes and became popular with many hunters of non-dangerous game, being regarded as adequate for anything from the relatively small impala, to the massive eland and kudu.[7]

The Mk II round-nosed bullet was found to be unsatisfactory when used in combat, particularly when compared to the dum-dum rounds issued in limited numbers in 1897 during the Chitral and Tirah expeditions of 1897/98 on the North West Frontier of India.[6] This led to the introduction of the Cartridge S.A. Ball .303 inch Cordite Mark III, basically the original 215-grain (13.9 g) bullet with the jacketing cut back to expose the lead in the nose.[6] Similar hollow-point bullets were used in the Mk IV and Mk V loadings, which were put into mass production. The design of the Mk IV hollow-point bullet shifted bullet weight rearwards, improving stability and accuracy over the regular round-nose bullet.[6] These soft-nosed and hollow-point bullets, while effective against human targets, had a tendency to shed the outer metal jacket upon firing; the latter occasionally stuck in the bore, causing a dangerous obstruction.[6] The Mk III, Mk IV, and Mk V were later prohibited by the Hague Convention of 1899[6] and were withdrawn from active service, where the remaining stocks (over 45 million) were used for target practice.

To replace the Mk III, IV, and V, the Mark VI round was introduced in 1904, using a round nose bullet similar to the Mk II, but with a thinner jacket designed to produce provide some expansion, though this proved not to be the case.[8][9]

Mark VII

In 1898, APX (Atelier de Puteaux), With their "Balle D" design for the 8mm Lebel Cartridge, revolutionised bullet design with the introduction of pointed "spitzer" rounds. In addition to being pointed, the round was also much lighter in order to deliver a higher muzzle velocity. It was found that as velocity increased the bullets suddenly became much more deadly.[10]

In 1910, the British took the opportunity to replace their Mk VI cartridge with a more modern design. The Mark VII loading used a 174-grain (11.3 g) pointed bullet with a flat-base which gave a muzzle velocity of 2,440 ft/s, (740 m/s) and a ballistic coefficient of .467.[11] The Mk VII was different from earlier .303 bullet designs or spitzer projectiles in general. Although the it appears to be a conventional spitzer-shape full metal jacket bullet, this appearance is deceptive: its designers made the front third of the interior of the Mk 7 bullet out of aluminium (from Canada) or tenite (cellulosic plastic), wood pulp or compressed paper, instead of lead. This lighter nose shifted the centre of gravity of the bullet towards the rear, making it tail heavy. Although the bullet was stable in flight due to the gyroscopic forces imposed on it by the rifling of the barrel, it behaved very differently upon hitting the target. As soon as the bullet hit the target and decelerated, its heavier lead base caused it to yaw violently and deform, thereby inflicting more severe gunshot wounds than a standard spitzer design.[12] In spite of this, the Mk VII bullet was legal according to the terms of the Hague Convention.

The Mk VII (and later Mk VIII) rounds have versions utilizing nitrocellulose flake powder smokeless propellants. The nitrocellulose versions—first introduced in World War I—were designated with a "Z" postfix indicated after the type (e.g. Mark VIIZ, with a weight of 175 grains) and in headstamps.[13]

Perhaps the most famous single .303 British round ever fired was on 21 April 1918, during World War I, when Manfred von Richthofen, the famed "Red Baron" flying ace, was mortally wounded by a single .303 Mk 7 round.[14]

Mark VIII

In 1938 the Mark 8 (Mark VIII and Mark VIIIz) round was approved to obtain greater range from the Vickers machine gun.[15] Slightly heavier than Mk VII bullet at 175 grains (11.3 g), the primary difference was the addition of a boat-tail and more propellant (41 grains of nitrocelluose powder in the case of the Mk VIIIz), giving a muzzle velocity of 2,525–2,900 ft/s (780–884 m/s). As a result, the chamber pressure was significantly higher, at 42,000–60,000 lbf/sq in (approximately 280–414 MPa), depending upon loading, compared to the 39,000 lbf/sq in of the Mark VII round.[16] Cross-sectional images of Mk VIII ammunition indicate that its boat-tail bullet was long and gently tapered, providing a very high ballistic coefficient. Mk VIII ammunition was described as being for "All suitably-sighted .303-inch small arms and machine guns" but caused significant bore erosion in weapons formerly using Mk VII cordite, ascribed to the channelling effect of the boat-tail projectile. As a result it was prohibited from general use with rifles and light machine guns, except in emergency.[17] As a consequence of the official prohibition, ordnance personnel reported that every man that could get his hands on Mk VIII ammunition promptly used it in his own rifle.[15]

Tracer, armour-piercing and incendiary

Tracer and armour-piercing cartridges were introduced during 1915, with explosive bullets derived from John Pomeroy's work introduced as the Mark VII.Y in 1916.

Several incendiaries were privately developed from 1914 to counter the Zeppelin threat, but none were approved until the Brock design late in 1916 as BIK Mark VII.K [18] Wing Cmdr. Brock RNVR was a member of the Brock fireworks-making family.

These rounds were extensively developed over the years and saw several Mark numbers. The last tracer round introduced into British service was the G Mark 8 in 1945, the last armour-piercing round was the W Mark 1Z in 1945, and the last incendiary round was the B Mark 7 in 1942. Explosive bullets were not produced in the UK after 1933 due to the relatively small amount of explosive that could be contained in the bullet, limiting their effectiveness, their role being successfully fulfilled by the use of Mark 6 and 7 incendiary bullets.

In 1935 the .303 O Mark 1 Observing round was introduced for use in machine guns. The bullet to this round was designed to break up with a puff of smoke on impact. The later Mark 6 and 7 incendiary rounds could also be used in this role if required.

During World War I British factories alone produced 7,000,000,000 rounds of .303 ammunition. Factories in other countries added greatly to this total.[19]

Japanese 7.7 mm ammunition

Cutaways of the five types of ammunition produced in Japan.

Japan produced a number of machine guns that were direct copies of the British Lewis (Japanese Type 92 machine gun) and Vickers machine guns including the ammunition. These were primarily used in Navy aircraft. The 7.7mm cartridge used by the Japanese versions of the British guns is a direct copy of the .303 British (7.7x56R) rimmed cartridge and is distinctly different from the 7.7x58mm Arisaka rimless and 7.7x58mm Type 92 semi-rimmed cartridges used in other Japanese machine guns and rifles.[20]

  • Ball: 174 grains (11.3 g). CuNi jacket with a composite aluminium/lead core. Black primer.
  • A.P.: brass jacket with a steel core. White primer.
  • Tracer: 130 grains (8.4 g). CuNi jacket with a lead core. Red primer.
  • Incendiary: 133 grains (8.6 g). Brass jacket with white phosphorus and lead core. Green primer.
  • H.E.: a Copper jacket with a PETN and lead core. Purple primer.

Note: standard Japanese ball ammunition was very similar to the British Mk 7 cartridge. The two had identical bullet weights and a "tail-heavy" design, as can be seen in the cut-away diagram.

Military surplus ammunition

Military surplus .303 British ammunition is often available, notably at gun shows and from online dealers. It may or may not have corrosive primers. Care must be taken to identify the round properly before purchase or loading into weapons. Cartridges with the Roman numeral VIII on the headstamp are the Mark 8 round, specifically designed for use in Vickers machine guns. Although Mark 8 ammunition works well in a Vickers gun, it should not be used in rifles because the boat-tailed design causes increased barrel wear. The boat-tailed bullet design of Mk 8 ammunition is not in itself a problem. However, when combined with the cordite propellant used in Mk 8 cartridges, which burns at a much higher temperature than nitrocellulose, there is increased barrel erosion. The cumulative effects of firing Mk 8 ammunition through rifles were known of during the Second World War, and British riflemen were ordered to avoid using it, except in emergencies. The best general-purpose ammunition for any .303 military rifle is the Mark 7 design because it provides the best combination of accuracy and stopping power.

There is no problem with using ammunition loaded with corrosive primers, providing that the gun is thoroughly cleaned after use to remove the corrosive salts. The recommended cleaning methods are 1) Flushing the bore with boiling water or 2) swabbing with a bore-cleaning solvent known to be effective at removing corrosive-primer salt residues. A light application of preservative oil should be used after either method. Corrosive primers are still used in the manufacture of ammunition in some countries, and advertising or packaging marks may not be correct.

Commercial ammunition

Commercial soft point .303 British.
Civilian soft point .303 ammunition, suitable for hunting purposes.

Commercial ammunition for weapons chambered in .303 British is readily available, as the cartridge is still manufactured by major producers such as Remington, Federal, Winchester, Sellier & Bellot, Prvi Partizan and Wolf. Reloading equipment and ammunition components are also manufactured by companies such as Hornady. Where extreme accuracy is required, the Sierra Matchking 174-grain (11.3 g) HPBT bullet is a popular choice. Commercially produced ammunition is widely available in various FMJ, soft point, hollow point, flat-based and boat tail designs—both spitzer and round-nosed. The classic 174-grain (11.3 g) FMJ bullets are widely available, though purchasers may wish to check whether or not these feature the tail-heavy Mk 7 design. In any case other bullet weights are available e.g. 150, 160, 170, 180 and 200-grain (13 g), both for hunting and target purposes.

Weapons chambered for .303 British

See also

References

  1. ^ ".303 British" (PDF). Accurate Powder. http://www.accuratepowder.com/data/PerCaliber2Guide/Rifle/Standarddata(Rifle)/311Cal(7.90mm)/303%20British%20pages%20282%20and%20283.pdf. 
  2. ^ Hornady Handbook of Cartridge Reloading, Rifle-Pistol, Third Edition, Hornady Manufacturing Company, 1980, 1985, p.253-254.
  3. ^ a b c Chisholm, Hugh, Encyclopædia Britannica (11th ed.), New York: The Encyclopædia Britannica Co., Vol. 23, (1911) p. 327
  4. ^ a b Sanford, Percy Gerald, Nitro-explosives: a Practical treatise Concerning the Properties, Manufacture, and Analysis of Nitrated Substances, London: Crosby Lockwood & Son (1896) pp. 166-173, 179
  5. ^ a b c d Walke, Willoughby (Lt.), Lectures on Explosives: A Course of Lectures Prepared Especially as a Manual and Guide in the Laboratory of the U.S. Artillery School, J. Wiley & Sons (1897) pp. 336-343
  6. ^ a b c d e f Ommundsen, Harcourt, and Robinson, Ernest H., Rifles and Ammunition Shooting, New York: Funk & Wagnalls Co. (1915), p. 117-119
  7. ^ Hawks, Chuck. "Matching the Gun to the Game". ChuckHawks.com. http://www.chuckhawks.com/gun_game.htm. Retrieved 6 September 2010. 
  8. ^ "REJECTED MARK IV. BULLETS.". http://hansard.millbanksystems.com/commons/1901/mar/21/rejected-mark-iv-bullets#S4V0091P0-01962. 
  9. ^ "Dum Dums". http://www.thegunzone.com/dum-dum.html. 
  10. ^ http://www.chuckhawks.com/8mm_lebel.htm
  11. ^ David Cushman. "History of the .303 British Calibre Service Ammunition Round". http://www.dave-cushman.net/shot/303hist.html. 
  12. ^ "The Deadly .303 British and The Box O' Truth". Box of Truth website. http://www.theboxotruth.com/docs/bot37.htm. 
  13. ^ "The .303 British Cartridge". http://enfieldrifles.profusehost.net/gh2.htm. 
  14. ^ "The Death of Manfred von Richthofen: Who fired the fatal shot?" by Dr M. Geoffrey Miller
  15. ^ a b Dunlap, Roy F., Ordnance Went Up Front, Samworth Press (1948), p. 40. ISBN 978-1-884849-09-1
  16. ^ Dunlap, Roy F., Ordnance Went Up Front, Samworth Press (1948), ISBN 978-1-884849-09-1 p. 40: There appear to have been two distinct loadings of the Mark VIII cartridge: one small arms expert serving with the Royal Army Ordnance Corps at Dekheila noted that Mk VIIIz ammunition he examined had a claimed muzzle velocity of 2,900 ft/s (880 m/s), furthermore, primers on MK VIII fired cases he examined looked "painted on", normally indicating a pressure of around 60,000 lbs. per square inch.
  17. ^ Temple, B.A.. Identification Manual on the .303 British Service Cartridge No.1 - Ball Ammunition. 
  18. ^ Labbett, P.; Mead, P.J.F (1988). "Chapter 5, .303 inch Incendiary, Explosive and Observing Ammunition". .303 inch: a history of the .303 cartridge in British Service. authors. ISBN 0-9512922-0-X. 
  19. ^ Featherstone-Haugh, JJ. (1973). "Appendix VII, page IV, "British Military Output WWI"". Home Front - Untold Tales of British Workers during the Great Wars. OUP. 
  20. ^ Walter H.B. Smith, Small Arms of the World, Stackpole Publications.

External links


Wikimedia Foundation. 2010.

Игры ⚽ Нужно сделать НИР?

Look at other dictionaries:

  • .303 British — Une cartouche de .303 Caractéristiques Calibre 7.7x56mm Corps de douille à bourrelet Pays d origine …   Wikipédia en Français

  • .303 British — Патрон .303 British Тип патрона : винтовочный патрон Страна производитель …   Википедия

  • .303 British — Un cartucho .303 British. El .303 British o 7,70 x 56 R es un cartucho de fusil y ametralladora calibre 0,311 pulgadas, desarrollado en el Reino Unido durante la década de 1880 como un cartucho de pólvora negra que fue posteriormente adaptado… …   Wikipedia Español

  • .303 British — 7,7 x 56 mm R Allgemeine Information Kaliber: .303 British, 7,7 x 56 mm R Hülsenform …   Deutsch Wikipedia

  • 303 (disambiguation) — 303 could refer to:* 303 (number), the number * the year 303 * Telephone Area code 303, assigned to central Colorado * The Roland TB 303 * .303 British, the 303 calibre rifle and machine gun cartridge * 303 (comics), a comic book miniseries by… …   Wikipedia

  • .303 (значения) — 303 (0.303, 0,303) может означать: .303 British английский винтовочный унитарный патрон, применялся в винтовках Ли Энфилд 1904, пулемётах Льюис и Виккерс; .303 Savage винтовочный патрон США; .303 короткометражный фильм (Мальта, 2009 год) …   Википедия

  • .303 — may refer to: * .303 British, a rifle cartridge * .303 Savage, a rifle cartridge …   Wikipedia

  • British military rifles — The origins of the modern British military rifles are within its predecessor the Brown Bess musket. While a musket was largely inaccurate due to a lack of rifling and generous tolerance to allow for muzzle loading it was cheaper to produce,… …   Wikipedia

  • .303 Savage — Infobox Firearm Cartridge name= .303 Savage caption= .303 Savage cartridge dimensions origin= flagcountry|United States type= Rifle service= used by= wars= designer= Savage Arms design date= manufacturer=Savage Arms production date=1895 number=… …   Wikipedia

  • .303/22 — Infobox Firearm Cartridge name= .303/.22 origin=flagcountry|Australia type=Rifle designer= design date= 1930s manufacturer= production date= number= variants=Sprinter, Falcon, Varmint R parent=.303 British case type=Rimmed, bottleneck bullet=… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”