Admittance parameters

Admittance parameters

Admittance parameters or Y-parameters are properties used in electrical engineering, electronics engineering, and communication systems engineering describe the electrical behavior of linear electrical networks when undergoing various steady state stimuli by small signals. They are members of a family of similar parameters used in electronics engineering, other examples being: S-parameters, [Pozar, David M. (2005); "Microwave Engineering, Third Edition" (Intl. Ed.); John Wiley & Sons, Inc.; pp 170-174. ISBN 0-471-44878-8.] Z-parameters, [Pozar, David M. (2005) (op. cit); pp 170-174.] H-parameters, T-parameters or ABCD-parameters. [Pozar, David M. (2005) (op. cit); pp 183-186.] [Morton, A. H. (1985); " Advanced Electrical Engineering";Pitman Publishing Ltd.; pp 33-72. ISBN 0-273-40172-6]

The General Y-Parameter Matrix

For a generic multi-port network definition, it is assumed that each of the ports is allocated an integer 'n' ranging from 1 to N, where N is the total number of ports. For port n, the associated Y-parameter definition is in terms of input voltages and output currents, V_n, and I_n, respectively.

For all ports the output currents may be defined in terms of the Y-parameter matrix and the input voltages by the following matrix equation:

:I = Y V,

where Y is an N x N matrix the elements of which can be indexed using conventional matrix notation. In general the elements of the Y-parameter matrix are complex numbers.

The phase part of an Y-parameter is the "spatial" phase at the test frequency, not the temporal (time-related) phase.

Two-Port Networks

The Y-parameter matrix for the two-port network is probably the most common. In this case the relationship between the input voltages, output currents and the Y-parameter matrix is given by:

:{I_1 choose I_2} = egin{pmatrix} Y_{11} & Y_{12} \ Y_{21} & Y_{22} end{pmatrix}{V_1 choose V_2} .

where

:Y_{11} = {I_1 over V_1 } igg|_{V_2 = 0} qquad Y_{12} = {I_1 over V_2 } igg|_{V_1 = 0}

:Y_{21} = {I_2 over V_1 } igg|_{V_2 = 0} qquad Y_{22} = {I_2 over V_2 } igg|_{V_1 = 0}

Admittance relations

The input admittance of a two-port network is given by:

:Y_{in} = y_{11} - frac{y_{12}y_{21{y_{22}+Y_L}

where YL is the admittance of the load connected to port two.

Similarly, the output admittance is given by:

:Y_{out} = y_{22} - frac{y_{12}y_{21{y_{11}+Y_S}

where YS is the admittance of the source connected to port one.

Converting Two-Port Parameters

The two-port Y-parameters may be obtained from the equivalent two-port S-parameters by means of the following expressions.

:Y_{11} = {((1 - S_{11}) (1 + S_{22}) + S_{12} S_{21}) over Delta_S} ,

:Y_{12} = {-2 S_{12} over Delta_S} ,

:Y_{21} = {-2 S_{21} over Delta_S} ,

:Y_{22} = {((1 + S_{11}) (1 - S_{22}) + S_{12} S_{21}) over Delta_S} ,

Where

:Delta_S = (1 + S_{11}) (1 + S_{22}) - S_{12} S_{21} ,

The above expressions will generally use complex numbers for S_{ij} and Y_{ij}. Note that the value of Delta can become 0 for specific values of S_{ij} so the division by Delta in the calculations of Y_{ij} may lead to a division by 0.

S-parameter conversions into other matrices by simply multiplying with e.g. Z_0 = 50Omega are only valid if the characteristic impedance Z_0 is not frequency dependent.

Conversion from Z-parameters to Y-parameters is much simpler, as the Y-parameter matrix is basically the matrix inverse of the Z-parameter matrix. The following expressions show the applicable relations:

:Y_{11} = {Z_{22} over Delta_Z} ,

:Y_{12} = {-Z_{12} over Delta_Z} ,

:Y_{21} = {-Z_{21} over Delta_Z} ,

:Y_{22} = {Z_{11} over Delta_Z} ,

Where

:Delta_Z = Z_{11} Z_{22} - Z_{12} Z_{21} ,

In this case Delta_Z is the determinant of the Z-parameter matrix.

Vice versa the Y-parameters can be used to determine the Z-parameters, essentially using thesame expressions since

:Y = Z^{-1} ,

And

:Z = Y^{-1} ,

References

Bibliography

*David M. Pozar, "Microwave Engineering", Third Edition, John Wiley & Sons Inc.; ISBN 0-471-44878-8

ee also

*Scattering parameters
*Impedance parameters
*Two-port network
*Hybrid-pi model
*Power gain


Wikimedia Foundation. 2010.

Игры ⚽ Нужно сделать НИР?

Look at other dictionaries:

  • Impedance parameters — or Z parameters are properties used in electrical engineering, electronics engineering, and communication systems engineering describe the electrical behavior of linear electrical networks when undergoing various steady state stimuli by small… …   Wikipedia

  • Nodal admittance matrix — In power engineering, Y Matrix or Ybus is an n x n symmetric matrix describing a power system with n buses. It represents the nodal admittance of the buses in a power system. In realistic systems which contain thousands of buses, the Y matrix is… …   Wikipedia

  • Scattering parameters — or S parameters are properties used in electrical engineering, electronics engineering, and communication systems engineering describing the electrical behavior of linear electrical networks when undergoing various steady state stimuli by small… …   Wikipedia

  • Two-port network — A Two Port Network (or four terminal network or quadripole) is an electrical circuit or device with two pairs of terminals (i.e., the circuit connects two dipoles). Two terminals constitute a port if they satisfy the essential requirement known… …   Wikipedia

  • Transistor models — Transistors are complicated devices. In order to ensure the reliable operation of circuits employing transistors, it is necessary to scientifically model the physical phenomena observed in their operation using transistor models. There exists a… …   Wikipedia

  • Smith chart — The Smith Chart, invented by Phillip H. Smith (1905 1987), [Smith, P. H.; Transmission Line Calculator; Electronics, Vol. 12, No. 1, pp 29 31, January 1939] [Smith, P. H.; An Improved Transmission Line Calculator; Electronics, Vol. 17, No. 1, p… …   Wikipedia

  • RLC circuit — A series RLC circuit: a resistor, inductor, and a capacitor An RLC circuit (or LCR circuit) is an electrical circuit consisting of a resistor, an inductor, and a capacitor, connected in series or in parallel. The RLC part of the name is due to… …   Wikipedia

  • Metal-mesh optical filters — are optical filters made from stacks of metal meshes and dielectric. They are used as part of an optical path to filter the incoming light to allow frequencies of interest to pass while reflecting other frequencies of light. Metal mesh filters… …   Wikipedia

  • Network analysis (electrical circuits) — Linear Network Analysis Elements …   Wikipedia

  • M-derived filter — m type filters or m derived filters are a type of electronic filter designed using the image method. They were invented by Otto Zobel in the early 1920s. This filter type was originally intended for use with telephone multiplexing and was an… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”