Multiprotocol Encapsulation

Multiprotocol Encapsulation

Multiprotocol Encapsulation, or MPE for short, is a Data link layer protocol defined by DVB which has been published as part of ETSI EN 301 192. It provides means to carry packet oriented protocols (like for instance IP) on top of MPEG transport stream (TS).

Another encapsulation method is Unidirectional Lightweight Encapsulation (ULE) which was developed and standardized within the IETF as RFC 4326.

Contents

Protocol Outline

MPE uses MPEG-2 Private Table sections to carry the user datagrams. The section header is used to convey:

  • the frame's destination MAC address
  • optional ISO/IEC 8802-2 Logical Link Control (LLC) and ISO/IEC 8802-1 Sub-Network Attachment Point (SNAP) information
  • a payload scrambling indication
  • a MAC address scrambling indication

MAC addresses from 1 to 6 bytes length may be used. The format of MPEG-2 DSM-CC sections happens to be compatible with DVB MPE.

MPE-based IP Service Offerings

Service Architecture

A complete IP service offering over MPEG-2 TS can be established by organizing MPE streams into one or more IP Platforms carried on a broadcast network by means of the IP/MAC Notification Table mechanism which is also defined in ETSI EN 301 192.

Commercial Offerings

Both major European satellite operators (SES Astra and Eutelsat) are offering commercial IP services using MPE (such as ASTRA2Connect) to both businesses and consumers.

External links

See also


Wikimedia Foundation. 2010.

Игры ⚽ Нужна курсовая?

Look at other dictionaries:

  • Multiprotocol Encapsulation — Das Multiprotocol Encapsulation (MPE) ist ein IP basiertes Protokoll auf der Sicherungsschicht für MPEG 2 Datenströme für das Digital Video Broadcasting. Es wurde vom Europäischen Institut für Telekommunikationsnormen als EN 301 192… …   Deutsch Wikipedia

  • Multiprotocol Encapsulation — MPE FEC (Multiprotocol Encapsulation – Forward Error Correction) es el protocolo de corrección de errores usado por el estándar DVB H, puesto que las interfaces de entrada y salida son IP. Contenido 1 Objetivo 2 Entramado MPE FEC 2.1 Mecanismo de …   Wikipedia Español

  • Multiprotocol Encapsulation over ATM — is specified in RFC 2684. It defines two mechanisms for identifying the protocol carried in ATM Adaptation Layer 5 (AAL5) frames. The AAL5 trailer does not include a type field. Thus, an AAL5 frame is not self identifying. This means that either… …   Wikipedia

  • Multiprotocol over ATM — Multiprotocol Encapsulation over ATM (MPoA) ist eine Technik, um IP Verkehr effizienter über ein ATM basiertes Netz zu transportieren. Da keine LAN Emulation stattfindet, können Schicht 3 Protokolle direkt die Mechanismen von ATM (z. B.… …   Deutsch Wikipedia

  • Multiprotocol Label Switching — MPLS redirects here. For other uses, see Mpls. MPLS Layer Multiprotocol Label Switching (MPLS) is a mechanism in high performance telecommunications networks that directs data from one network node to the next based on short path labels rather… …   Wikipedia

  • Unidirectional Lightweight Encapsulation — The Unidirectional Lightweight Encapsulation (ULE) is a Data link layer protocol for the transportation of network layer packets over MPEG 2 Transport Streams.Because of the very low protocol overhead, it is especially suited for IP over… …   Wikipedia

  • Multi Protocol Encapsulation — Das Multiprotocol Encapsulation (MPE) ist ein IP basiertes Protokoll auf der Sicherungsschicht für MPEG 2 Datenströme für das Digital Video Broadcasting. Es wurde vom Europäischen Institut für Telekommunikationsnormen als EN 301 192… …   Deutsch Wikipedia

  • RFC 1483 — Multiprotocol Encapsulation over ATM Adaptation Layer 5. Juha Heinanen. July 1993 …   Acronyms

  • RFC 2684 — Multiprotocol Encapsulation over ATM Adaptation Layer 5. D. Grossman, J. Heinanen. September 1999. (Ersetzt folgendes RFC :RFC 1483) …   Acronyms

  • RFC 1483 — Multiprotocol Encapsulation over ATM Adaptation Layer 5. Juha Heinanen. July 1993 …   Acronyms von A bis Z

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”