NER Class M1

NER Class M1
NER Class M1/M, Q and Q1
LNER Class D17/1, D17/2 and D18
Power type Steam
Designer Wilson Worsdell
Builder NER Gateshead
Build date 1892-1894 (Class M1)
1896-1897 (Class Q)
1896 (Class Q1)
Total produced 20 (Class M1)
30 (Class Q)
2 (Class Q1)
Configuration 4-4-0
Gauge 1,435 mm (4 ft 8 12 in)
Leading wheel
diameter
3 ft 7 14 in (1.099 m)
Driver diameter 7 ft 1 14 in (2.165 m)
Wheelbase 23 ft 6 in (7.16 m) Class M1/Q engine
23 ft 9 in (7.24 m) Class Q1 engine
12 ft 8 in (3.86 m) tender
45 ft 8 14 in (13.926 m) Class M1/Q total
46 ft 2 34 in (14.091 m) Class Q1 total
Axle load 18.6 long tons (18.9 t) (Class M1)
18.8 long tons (19.1 t) (Class Q)
19.2 long tons (19.5 t) (Class Q1)
Locomotive weight 52.5 long tons (53.3 t) (Class M1)
50.3 long tons (51.1 t) (Class Q)
53.5 long tons (54.4 t) (Class Q1)
Tender weight 41.2 long tons (41.9 t)
Locomotive & tender
combined weight
93.7 long tons (95.2 t) (Class M1)
91.5 long tons (93.0 t) (Class Q)
94.7 long tons (96.2 t) (Class Q1)
Boiler 4 ft 4 in (1.32 m) diameter
Boiler pressure 160 psi (1.1 MPa)
Firegrate area 19.8 sq ft (1.84 m2)
Heating surface:
Tubes
479 sq ft (44.5 m2)
Heating surface:
Flues
291 sq ft (27.0 m2)
Heating surface:
Firebox
123 sq ft (11.4 m2)
Heating surface:
Total
1,097 sq ft (101.9 m2)
Superheater area 204 sq ft (19.0 m2)
Cylinders 2 (inside)
Cylinder size 19 × 26 in (480 × 660 mm)
20 × 26 in (510 × 660 mm) (No. 1870)
Valve gear Stephenson
Tractive effort 14,974 lbf (66.61 kN) (Class M1/Q)
13,990 lbf (62.2 kN) (No. 1869)
15,500 lbf (69 kN) (No. 1870)
Career North Eastern Railway, London & North Eastern Railway, British Rail
Retired 1931-1945 (Class M1)
1931-1948 (Class Q)
1930 (Class Q1)
Disposition 1 preserved (No. 1621), 19 scrapped (Class M1)
All scrapped (Class Q)
Both scrapped (Class Q1)

The North Eastern Railway Class M1 (LNER Class D17/1) is a class of 4-4-0 steam locomotive, designed by Wilson Worsdell. 20 initial engines were built, then 30 further units were built, designated Class Q (LNER Class D17/2).

Contents

Classification

Classification is complex. The NER initially classified these locomotives "M1" while a variant (with compound expansion) was classified "M". The compound was later re-classified "3CC" and the "M1" was re-classified "M".

Under LNER ownership the "M" (formerly "M1") became LNER Class D17/1 and the "3CC" (formerly "M") became LNER Class D19.

This table summarises LNER classes D17, D18 and D19, which were all very similar:

Original NER class New NER class LNER Class Cylinders Driving wheels
M1 M D17/1 (2) 19" x 26" 7' 1¼"
Q - D17/2 (2) 19½" x 26" 7' 1¼"
Q1 - D18 (2) 19½" x 26" 7' 7¼"
M 3CC D19 HP (1) 19" x 26"
LP (2) 20" x 24"
7' 1¼"
  • HP = high pressure cylinder, LP = low pressure cylinders

Withdrawal

The last two D17/1s were withdrawn in 1945. Number 1629 was scrapped but number 1621 was saved for preservation.

No D17/1s passed into British Railways ownership. Two D17/2s did (BR numbers 62111 and 62112) but they were withdrawn in February 1948.

Preservation

External links