Moorsom System

Moorsom System

The Moorsom System is a method created in Great Britain of calculating the tonnage or cargo capacity of sailing ships as a basis for assessing harbour and other vessel fees. It was put into use starting in 1849 and became British law in 1854.

Contents

Previous methods

Previous methods of calculating tonnage, as Builder's Old Measurement, were not being consistently applied and, because they were designed for sailing ships, could not be applied appropriately or fairly for steamships. Substantial portions of a steamship were required for boilers, machinery and coal, thus limiting the proportion of the ship's space available for cargo.

Commission appointed

In 1849 Great Britain appointed a Commission with Admiral George Moorsom as secretary to resolve these problems. The Commission determined that fees should be proportional to the earning capacity of the ship, whether for cargo or passengers.

The result was called The Moorsom System, which set forth the rules for the measurement of the internal volume of entire ship. The total internal volume was then divided by 100 ft³ to produce the gross tonnage. Net tonnage was the volume remaining after subtracting the volume of the space used for machinery and other non-revenue producing functions[1].

The Commission sought to avoid a significant change in the fees charged to an existing vessel when the new system was implemented. George Moorsom ordered the entire fleet of British merchant ships to be measured according to the new System and then divided the total gross tonnage by the total registered tonnage. The result was 98.22 ft³ per gross ton, which was rounded to 100 ft³ per ton.[2]

International Convention

While the rules for measuring ships changed over the years, the standard of 100 ft³ per ton remained in effect until a new system was established by The International Convention on the Tonnage Measurement of Ships, effective for new ships in July 1982.

References

  1. ^ Pomeroy, ed., C.. "Owner's Guide to Tonnage Measurement 1998-2003". Articles. Jensen Maritime Consultants, Inc. http://www.best-maritime.info/catalogue_companies_list/company_source_29330_1.html. Retrieved 2007-04-27. 
  2. ^ Kemp, ed., P. (1976). The Oxford Companion to Ships & the Sea. Oxford University Press. pp. 559. ISBN 0-1921-1553-7. 

Wikimedia Foundation. 2010.

Игры ⚽ Поможем сделать НИР

Look at other dictionaries:

  • Moorsom — is a surname, and may refer to: Constantine Richard Moorsom (1792–1861), Royal Navy admiral, businessman and abolitionist Robert Moorsom (1760 1835), Royal Navy admiral William Moorsom (1804 1863), English engineer See also Moorsom System HMS… …   Wikipedia

  • Schiffsvermessung — ist die Ermittlung des Raumgehaltes eines Seeschiffes (engl. tonnage of a ship) Tonne = Fass aus dem Keltischen (mittelirisch/gälisch: tunna) von dort ins Mittellateinische (tunna = Fass, um 600 n. Chr. in die germanische und romanischen… …   Deutsch Wikipedia

  • Geschichte des Sueskanals — Der Sueskanal wurde in den Jahren 1859 bis 1869 von der von Ferdinand de Lesseps gegründeten und geleiteten Compagnie universelle du canal maritime de Suez gebaut und von ihr bis zur Nationalisierung im Jahre 1956 betrieben. Seitdem untersteht er …   Deutsch Wikipedia

  • Tonnage — Not to be confused with Ton. Tonnage is a measure of the size or cargo carrying capacity of a ship. The term derives from the taxation paid on tuns or casks of wine, and was later used in reference to the weight of a ship s cargo; however, in… …   Wikipedia

  • Net tonnage — is calculated by measuring a ship s internal volume and applying mathematical formulae. Net tonnage (often abbreviated as NT, N.T. or nt) is a dimensionless index calculated from the total moulded volume of the ship s cargo spaces by using a… …   Wikipedia

  • Builder's Old Measurement — (BOM) is the method of calculating the size or cargo capacity of a ship used in England from approximately 1720 to 1849. The BOM estimated the tonnage of a ship based on length and maximum beam. The formula is: Tonnage = frac {({Length} Beam}… …   Wikipedia

  • Oil tanker — Supertanker redirects here. For the aerial firefighting aircraft, see Evergreen 747 Supertanker. The commercial oil tanker AbQaiq, in ballast Class overview Name …   Wikipedia

  • Panamax — The two ships seen here seem almost to be touching the walls of the Miraflores Locks. Panamax and New Panamax are popular terms for the size limits for ships traveling through the Panama Canal. Formally, the limits and requirements are published… …   Wikipedia

  • Draft (hull) — Draft marks on a ship s bow The draft (or draught) of a ship s hull is the vertical distance between the waterline and the bottom of the hull (keel), with the thickness of the hull included; in the case of not being included the draft outline… …   Wikipedia

  • Compensated gross tonnage — (CGT) is an indicator of the amount of work that is necessary to build a given ship and is calculated by multiplying the tonnage of a ship by a coefficient, which is determined according to type and size of a particular ship. The standard CGT… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”