Cierva W.9

Cierva W.9
W.9
The W.9 in April 1947
Role experimental helicopter
Manufacturer Cierva Autogiro Company, Ltd.
First flight 1945
Retired 1946
Primary user Air Ministry
Number built 1

The Cierva W.9 was a British 1940s experimental helicopter with a three-blade tilting-hub controlled main rotor, and torque compensation achieved using a jet of air discharged from the rear port side of the fuselage.

Contents

Development

In 1943 primary investor G & J Weir Ltd., revived the moribund Cierva Autogiro Company to develop an experimental helicopter to Air Ministry Specification E.16/43. The W.9 was to investigate James G. Weir's contention that a powered tilting hub controlled rotor with automatic collective pitch control, and torque reaction control using jet efflux, were both safer and more efficient than the Sikorsky R-4 helicopter fitted with manually controlled main rotor cyclic and collective pitch and the anti-torque tail rotor system. The W.9 was completed late in 1944 and serialed PX203. It was damaged during ground-running due to incorrect control phasing arising from a high order of pitch-flap coupling, and did not start test flying until 1945. The most visible characteristic of the W.9 was torque compensation using air blown by an engine-driven fan in its hollow tail boom exhausting to port. Of more importance, however, was the hydraulically powered shaft-driven tilting rotor hub with rotational speed variation to give automatic collective pitch control. Development of the rotor system resulted in a tilting hub combined with cyclic pitch control of each blade to minimize control forces. Manual control of collective pitch was added to the automatic collective pitch change system to provide precise vertical control in hover and the ability to cushion a landing from an autorotative descent. The helicopter was destroyed in an accident in 1946 and the project was abandoned. Parts of the W.9 rotor hub were used in the W.14 Skeeter prototype.

Specifications (W.9)

General characteristics

  • Crew: two
  • Length: ()
  • Rotor diameter: 36 ft 0 in (10.97 m)
  • Height: ()
  • Loaded weight: 2,647 lb (1,201 kg)
  • Powerplant: 1 × de Havilland Gipsy Six inline piston engine, 205 hp (153 kW)

Performance


Operators

 United Kingdom

See also

References

The Illustrated Encyclopedia of Aircraft (Part Work 1982-1985). Orbis Publishing. 

External links


Wikimedia Foundation. 2010.

Игры ⚽ Поможем написать реферат

Look at other dictionaries:

  • Cierva C.6 — Réplica del Cierva C.6 en el Museo del Aire en Cuatro Vientos (Madrid) Tipo Autogiro Fabricante Juan de la Cierva y Codorníu y Avro …   Wikipedia Español

  • Cierva C.19 — Focke Wulf C.20 (licencia la Cierva C.19) Tipo Autogiro …   Wikipedia Español

  • Cierva C.4 — Tipo Autogiro experimental Fabricante Juan de la Cierva Diseñado por Juan de la Cierva Primer vuelo Enero de 1923 …   Wikipedia Español

  • Cierva C.1 — Tipo Autogiro experimental Fabricante Juan de la Cierva y Codorníu Diseñado por Juan de la Cierva y Codorníu Primer vuelo …   Wikipedia Español

  • Cierva C.8 — en Berlín en septiembre de 1930. Tipo Autogiro …   Wikipedia Español

  • Cierva C.30 — Avro 671 Rota Mk 1 en el Imperial War Museum , Duxford Tipo Autogiro Fabricante A.V. Roe (Avro) …   Wikipedia Español

  • Cierva C.3 — Tipo Autogiro experimental Fabricante Juan de la Cierva y Codorníu Diseñado por Juan de la Cierva y Codorníu Primer vuelo …   Wikipedia Español

  • Cierva C.7 — Tipo Autogiro experimental Fabricante Jorge Loring Martínez Carabanchel Diseñado por Juan de la Cierva y Codorníu Usuario Ministerio del …   Wikipedia Español

  • Cierva C.2 — Tipo Autogiro experimental Fabricante Juan de la Cierva y Codorníu Diseñado por Juan de la Cierva y Codorníu Primer vuelo …   Wikipedia Español

  • Cierva C.5 — Tipo Autogiro experimental Fabricante Juan de la Cierva Diseñado por Juan de la Cierva Primer vuelo julio de 1923 …   Wikipedia Español

  • Cierva W.11 — Air Horse …   Deutsch Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”