Eight-to-Fourteen Modulation

Eight-to-Fourteen Modulation

Eight-to-Fourteen Modulation (EFM) is a data encoding technique used by CDs and pre-Hi-MD MiniDiscs. EFM and EFMPlus were both invented by Kees A. Schouhamer Immink.

Technological classification

EFM [US patent|4,501,000, EFM Patent, applied in Compact Disc, CD-R, MiniDisc.] belongs to the class of DC-free Run Length Limited (RLL) codes; these have the following two properties
* the spectrum (power density function) of the encoded sequence vanishes at the low-frequency end and
* both the minimum and maximum number of consecutive bits of the same kind are within specified bounds.

In optical recording systems, servo mechanisms accurately follow the track in three dimensions, radial, focus, and rotational speed. Everyday handling damage, such as dust, fingerprints, and tiny scratches, not only affects retrieved data, but also disrupts the servo functions. In some cases, the servos may skip tracks or get stuck. Specific sequences of pits and lands are particularly susceptible to disc defects, and disc playability can be improved if such sequences are barred from recording. The use of EFM produces a disc that is highly resilient to handling and solves the engineering challenge in a very efficient manner.

How it works

Under EFM rules, the data to be stored is first broken into 8-bit blocks (bytes). Each 8-bit block is translated into a corresponding 14-bit codeword using a lookup table.

The [http://www.physics.udel.edu/wwwusers/watson/scen103/efm.html 14-bit words] are chosen such that binary ones are always separated by a minimum of two and a maximum of ten binary zeroes. This is because bits are encoded with NRZI encoding, or modulo-2 integration, so that a binary one is stored on the disc as a change from a land to a pit or a pit to a land, while a binary zero is indicated by no change. A sequence 0011 would be changed into 1101 or its inverse 0010 depending on the previous pit written. If there are 2 zeroes between 2 consecutive ones, then the written sequence will have 3 consecutive zeros (or ones), for example, 010010 will translate into 100011 (or 011100). The EFM sequence 000100010010000100 will translate into 111000011100000111 (or its inverse).

Because EFM ensures there are at least 2 zeroes between every 2 ones, it is guaranteed that every pit and land is at least three bit clock cycles long. This property is very useful since it reduces the demands on the optical pickup used in the playback mechanism. The ten consecutive-zero maximum ensures worst-case clock recovery in the player.

EFM requires three merging bits between adjacent 14-bit codewords to ensure that consecutive codewords can be cascaded without violating the specified minimum and maximum runlength constraint. The 3 merging bits are also used to shape the spectrum of the encoded sequence. Thus, in the final analysis, 17 bits of disc space are needed to encode 8 bits of data.

Variations

EFMPlus [US patent|5,696,505, EFMPlus Patent, applied in DVD, DVD±RW, SACD] is the channel code used in DVDs and SACDs.

The EFMPlus encoder is based on a deterministic finite state machine having four states, which translates 8-bit input words into 16-bit codewords. The binary sequence generated by the finite state machine encoder has at least two and at most ten zeros between consecutive ones, which is the same as in classic EFM. There are no packing (merging) bits as in classic EFM.

EFMPlus effectively reduces storage requirements by one channel bit per user byte, increasing storage capacity by 1/16 = 6.25%. Decoding of EFMPlus-generated sequences is accomplished by a sliding-block decoder of length two, that is, two consecutive codewords are required to uniquely reconstitute the sequence of input words.

References

External links

Related websites
* [http://www.physics.udel.edu/wwwusers/watson/scen103/efm.html Eight-to-Fourteen Modulation Conversion Table]
* [http://www.ecma-international.org/publications/standards/Ecma-130.htm ECMA-130 CD-ROM standard, including full EFM description]
* [http://www.ecma-international.org/publications/standards/Ecma-267.htm ECMA-267 DVD-ROM standard, including full EFMPlus description]


Wikimedia Foundation. 2010.

Игры ⚽ Нужна курсовая?

Look at other dictionaries:

  • Eight-to-Fourteen-Modulation — (EFM) bezeichnet einen Leitungscode, welcher zur Datenaufzeichnung auf optischen Datenträgern wie Compact Disc (CDs), Minidiscs und Laserdiscs verwendet wird. Das Verfahren EFM und dessen Erweiterung EFMPlus wurde von Kees A. Schouhamer Immink… …   Deutsch Wikipedia

  • Eight-To-Fourteen Modulation — Le Eight to Fourteen Modulation (EFM) est une technique d encodage utilisée pour les disques compacts (CD) et les minidiscs (MD). Le terme Eight to Fourteen Modulation est utilisé tel quel dans le langage technique ; sa traduction littérale… …   Wikipédia en Français

  • Eight-to-fourteen modulation — Le Eight to Fourteen Modulation (EFM) est une technique d encodage utilisée pour les disques compacts (CD) et les minidiscs (MD). Le terme Eight to Fourteen Modulation est utilisé tel quel dans le langage technique ; sa traduction littérale… …   Wikipédia en Français

  • Eight-to-Fourteen Modulation — Pour les articles homonymes, voir EFM. Le Eight to Fourteen Modulation (EFM) est une technique d encodage utilisée pour les disques compacts (CD) et les minidiscs (MD). Le terme Eight to Fourteen Modulation est utilisé tel quel dans le langage… …   Wikipédia en Français

  • Modulation — For musical change of key, see Modulation (music). For other uses, see Modulation (disambiguation). Passband modulation v · d · e …   Wikipedia

  • 8/14 Modulation — Eight to Fourteen Modulation (EFM) bezeichnet das Verfahren, nach dem der Datenstrom, der auf CDs und Minidiscs gespeichert ist, codiert wird. Auch der digitale Sound von Laserdiscs ist EFM codiert. Jedem Byte (Datenblock, bestehend aus 8 Bits),… …   Deutsch Wikipedia

  • Pulse-amplitude modulation — Principle of PAM: (1) original signal, (2) PAM signal, (a) amplitude of signal, (b) time Pulse amplitude modulation, acronym PAM, is a form of signal modulation where the message information is encoded in the amplitude of a series of signal… …   Wikipedia

  • Pulse-code modulation — PCM redirects here. For other uses, see PCM (disambiguation). Pulse code modulation (PCM) is a method used to digitally represent sampled analog signals. It is the standard form for digital audio in computers and various Blu ray, Compact Disc and …   Wikipedia

  • EFM — Eight to Fourteen Modulation (CD) …   Acronyms

  • EFM — Eight to Fourteen Modulation (CD) …   Acronyms von A bis Z

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”